/* This is a linker parameter file for the MC9S12XHY128 */
/*
This file is setup to use the HCS12X core only.
If you plan to also use the XGATE in your project, best create a new project with the
'New Project Wizard' (File|New... menu in the CodeWarrior IDE) and choose the appropriate
project parameters.
*/
NAMES
/* CodeWarrior will pass all the needed files to the linker by command line. But here you may add your additional files */
END
SEGMENTS /* here all RAM/ROM areas of the device are listed. Used in PLACEMENT below. All addresses are 'logical' */
/* Register space */
/* IO_SEG = PAGED 0x0000 TO 0x07FF; intentionally not defined */
/* non-paged RAM */
RAM = READ_WRITE DATA_NEAR 0x2000 TO 0x3FFF;
/* non-banked FLASH */
ROM_4000 = READ_ONLY DATA_NEAR IBCC_NEAR 0x4000 TO 0x7FFF; //16K
//ROM_C000 = READ_ONLY DATA_NEAR IBCC_NEAR 0xC000 TO 0xFEFF; //15.75K
ROM_C000 = READ_ONLY DATA_NEAR IBCC_NEAR 0xC000 TO 0xFAFF; //14.75K
//VECTORS = READ_ONLY 0xFF00 TO 0xFFFF; /*intentionally not defined: used for VECTOR commands below */
//OSVECTORS = READ_ONLY 0xFF10 TO 0xFFFF; /* OSEK interrupt vectors (use your vector.o) */
/* paged EEPROM 0x0800 TO 0x0BFF; addressed through EPAGE */
EEPROM_00 = READ_ONLY DATA_FAR IBCC_FAR 0x000800 TO 0x000BFF; //1K
EEPROM_01 = READ_ONLY DATA_FAR IBCC_FAR 0x010800 TO 0x010BFF; //1K
EEPROM_02 = READ_ONLY DATA_FAR IBCC_FAR 0x020800 TO 0x020BFF; //1K
EEPROM_03 = READ_ONLY DATA_FAR IBCC_FAR 0x030800 TO 0x030BFF; //1K
EEPROM_04 = READ_ONLY DATA_FAR IBCC_FAR 0x040800 TO 0x040BFF; //1K
EEPROM_05 = READ_ONLY DATA_FAR IBCC_FAR 0x050800 TO 0x050BFF; //1K
EEPROM_06 = READ_ONLY DATA_FAR IBCC_FAR 0x060800 TO 0x060BFF; //1K
EEPROM_07 = READ_ONLY DATA_FAR IBCC_FAR 0x070800 TO 0x070BFF; //1K
/* paged RAM: 0x1000 TO 0x1FFF; addressed through RPAGE */
/* RAM_FE = READ_WRITE 0xFE1000 TO 0xFE1FFF; intentionally not defined: equivalent to RAM: 0x2000..0x2FFF */
/* RAM_FF = READ_WRITE 0xFF1000 TO 0xFF1FFF; intentionally not defined: equivalent to RAM: 0x3000..0x3FFF */
RAM_FD = READ_WRITE DATA_FAR 0xFD1000 TO 0xFD1FFF;
/* paged FLASH: 0x8000 TO 0xBFFF; addressed through PPAGE */
PAGE_F0 = READ_ONLY DATA_FAR IBCC_FAR 0xF08000 TO 0xF0BFFF;
PAGE_F1 = READ_ONLY DATA_FAR IBCC_FAR 0xF18000 TO 0xF1BFFF;
PAGE_F2 = READ_ONLY DATA_FAR IBCC_FAR 0xF28000 TO 0xF2BFFF;
PAGE_F3 = READ_ONLY DATA_FAR IBCC_FAR 0xF38000 TO 0xF3BFFF;
PAGE_F4 = READ_ONLY DATA_FAR IBCC_FAR 0xF48000 TO 0xF4BFFF;
PAGE_F5 = READ_ONLY DATA_FAR IBCC_FAR 0xF58000 TO 0xF5BFFF;
PAGE_F6 = READ_ONLY DATA_FAR IBCC_FAR 0xF68000 TO 0xF6BFFF;
PAGE_F7 = READ_ONLY DATA_FAR IBCC_FAR 0xF78000 TO 0xF7BFFF;
//PAGE_F8 = READ_ONLY DATA_FAR IBCC_FAR 0xF88000 TO 0xF8BFFF; //16K
PAGE_F8 = READ_ONLY DATA_FAR IBCC_FAR 0xF88000 TO 0xF89FFF; //8K
//BOOT_PAGE_F8 = READ_ONLY DATA_FAR IBCC_FAR 0xF8A000 TO 0xF8BFFF; //8K (Resvered for Bootloader)
//PAGE_F9 = READ_ONLY DATA_FAR IBCC_FAR 0xF98000 TO 0xF9BFFF; //16K
//PAGE_FA = READ_ONLY DATA_FAR IBCC_FAR 0xFA8000 TO 0xFABFFF; //16K
GLOBOL_40K = READ_ONLY 0x7E4000'G TO 0x7EDFFF'G;
/* 40 kByte global address range covering PAGE_F9..PAGE_FB */
PAGE_FB = READ_ONLY DATA_FAR IBCC_FAR 0xFBA000 TO 0xFBBFFF; //8K
PAGE_FC = READ_ONLY DATA_FAR IBCC_FAR 0xFC8000 TO 0xFCBFFF; //16K
/* PAGE_FD = READ_ONLY 0xFD8000 TO 0xFDBFFF; intentionally not defined: equivalent to ROM_4000 */
PAGE_FE = READ_ONLY DATA_FAR IBCC_FAR 0xFE8000 TO 0xFEBFFF; //16K
/* PAGE_FF = READ_ONLY 0xFF8000 TO 0xFFBFFF; intentionally not defined: equivalent to ROM_C000 */
END
PLACEMENT /* here all predefined and user segments are placed into the SEGMENTS defined above. */
_PRESTART, /* Used in HIWARE format: jump to _Startup at the code start */
STARTUP, /* startup data structures */
ROM_VAR, /* constant variables */
STRINGS, /* string literals */
VIRTUAL_TABLE_SEGMENT, /* C++ virtual table segment */
//.ostext, /* eventually OSEK code */
NON_BANKED, /* runtime routines which must not be banked */
COPY /* copy down information: how to initialize variables */
/* in case you want to use ROM_4000 here as well, make sure
that all files (incl. library files) are compiled with the
option: -OnB=b */
INTO ROM_C000, ROM_4000;
MAPDATA_ROM INTO GLOBOL_40K;
DEFAULT_ROM INTO PAGE_FE, PAGE_FC,
PAGE_F7, PAGE_F6, PAGE_F5, PAGE_F4, PAGE_F3, PAGE_F2, PAGE_F1, PAGE_F0;
//.stackstart, /* eventually used for OSEK kernel awareness: Main-Stack Start */
SSTACK, /* allocate stack first to avoid overwriting variables on overflow */
//.stackend, /* eventually used for OSEK kernel awareness: Main-Stack End */
DEFAULT_RAM /* all variables, the default RAM location */
INTO RAM;
PAGED_RAM INTO /* when using banked addressing for variable data, make sure to specify
the option -D__FAR_DATA on the compiler command line */
RAM_FD;
DISTRIBUTE DISTRIBUTE_INTO
ROM_4000, PAGE_FE, PAGE_FC, PAGE_F7,
PAGE_F6, PAGE_F5, PAGE_F4, PAGE_F3, PAGE_F2, PAGE_F1, PAGE_F0;
CONST_DISTRIBUTE DISTRIBUTE_INTO
ROM_4000, PAGE_FE, PAGE_FC, PAGE_F7,
PAGE_F6, PAGE_F5, PAGE_F4, PAGE_F3, PAGE_F2, PAGE_F1, PAGE_F0;
DATA_DISTRIBUTE DISTRIBUTE_INTO
RAM, RAM_FD;
//.vectors INTO OSVECTORS; /* OSEK vector table */
END
ENTRIES /* keep the following unreferenced variables */
/* OSEK: always allocate the vector table and all dependent objects */
//_vectab OsBuildNumber _OsOrtiStackStart _OsOrtiStart
END
STACKSIZE 0x200 /* 0x100 size of the stack (will be allocated in DEFAULT_RAM) */
/* use these definitions in plane of the vector table ('vectors') above */
VECTOR 0 _Startup /* reset vector: this is the default entry point for a C/C++ application. */
VECTOR 1 _Startup /* COP reset entry*/
VECTOR 2 _Startup /* COP reset entry*/
VECTOR 3 _Startup /* COP reset entry*/
//VECTOR 0 Entry /* reset vector: this is the default entry point for an Assembly application. */
//INIT Entry /* for assembly applications: that this is as well the initialization entry point */
VECTOR ADDRESS 0xFB78 NONUSE1_ISR
VECTOR ADDRESS 0xFB7A NONUSE2_ISR
VECTOR ADDRESS 0xFB7C NONUSE3_ISR
VECTOR ADDRESS 0xFB7E API_ISR // relocated interrupt table to 0xFB00 in initial routine within main();
VECTOR ADDRESS 0xFBB0 MSCAN0_TX_ISR // relocated interrupt table to 0xFB00 in initial routine within main();
VECTOR ADDRESS 0xFBB2 MSCAN0_RX_ISR // relocated interrupt table to 0xFB00 in initial routine within main();
//VECTOR ADDRESS 0xFBB4 NONUSE5_ISR
VECTOR ADDRESS 0xFBB6 MSCAN0_WAKEUP_ISR // relocated interrupt table to 0xFB00 in initial routine within main();
VECTOR ADDRESS 0xFBD6 SCI0_ISR // relocated interrupt table to 0xFB00 in initial routine within main(); ;
VECTOR ADDRESS 0xFBF0 RTI_ISR // relocated interrupt table to 0xFB00 in initial routine within main();
VECTOR ADDRESS 0xFBA0 Timer0_ONPUT