Merge branch 'ZMY' into 'dev'

增加2E服务写入UUID、增大STmin、 修改28服务释放的逻辑、增加BOOT文件

See merge request ty/tianying_ty100!26

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -50,6 +50,7 @@ static void Power_KL30_Init(void)
     Can_Init();
     CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
     DFlash_init();
+    Data_Read_DiagPara();
     Analog_Signal_Conv_Init();
     BU98R10_Init();   
     Uart0_Init(115200);
@@ -100,6 +101,8 @@ static void Power_Wakeup_Init(void)
     Gpio_Init(Gpio_WakeUp_Init);
     Can_Init();
     CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
+    DFlash_init();
+    Data_Read_DiagPara();
     eeprom_StoreInfo_Init();
     Analog_Signal_Conv_Init();
     Data_User_Mileage_WakeupInit();
@@ -163,6 +166,8 @@ static void Power_IG_ON_Init(void)
     BlueTooth_KL30_KL15_Wakeup_Init(); 
     Data_TPMS_KL15_WAKE_UP_Init();   
     CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
+    DFlash_init();
+    Data_Read_DiagPara();
 }
 
 static void Power_Sleep_Init(void)

Firmware/Source/UDS/DoCAN_ISO15765.c

@@ -716,7 +716,16 @@ void DoCAN_Receive_Flow_Control(void)
             values 1,10,20,30,40,50 and 60.
             -------------------------------------------------------*/
             if ( TpCtrl.Process != TP_TX_CTS )
-                TpCtrl.STmin = TransportRxData.N_PDU_FC.N_PCI.STmin;
+            {
+                if(TransportRxData.N_PDU_FC.N_PCI.STmin == 0)
+                {
+                    TpCtrl.STmin = 1;
+                }
+                else
+                {
+                    TpCtrl.STmin = TransportRxData.N_PDU_FC.N_PCI.STmin;
+                }
+            }
 
             /*-------------------------------------------------------
             Request a service where the response requires more than

Firmware/Source/UDS/UDS_ISO14229_Server.c

@@ -213,6 +213,8 @@ void UDS_Process_Service_Request(void)
             break;
         case 0x22: UDS_Service_22_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             break;
+        case 0x2E: UDS_Service_2E_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
+            break;
         case 0x27: UDS_Service_27_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             break;
         case 0x28: UDS_Service_28_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);

Firmware/Source/UDS/UDS_ISO14229_Services.c

@@ -43,6 +43,7 @@ DiagSendDataNeg NegRes;
 uint8_t UDS_ISO14229_Transfer[250];
 
 DiagDFlashData DiagDataForDFlash;
+Ser2EDFlashData Ser2EDataForDFlash;
 DiagFlag DiagDataForFlag;
 Ser27_FlowCtrlCntUnion Ser27_FlowCtrlCnt;
 uint8_t                FlashDriverCheckSum = 0;
@@ -160,6 +161,15 @@ void DFlash_init(void)
     }
 
 }
+void Data_Read_DiagPara(void)
+{
+    uint8_t i;
+    Ser2EDFlashData* ReadSer2EDataForDFlash = (Ser2EDFlashData*)0x500600ul; 
+    for ( i = 0; i < 32; i++)
+    {
+        Ser2EDataForDFlash.DID_F184[i] = ReadSer2EDataForDFlash->DID_F184[i];
+    }
+}
 void S3_ServerCNTT(void)
 {
     if ( Wait10sFlag == 1 )
@@ -189,6 +199,8 @@ void S3_ServerCNTT(void)
         if ( S3_ServerCnt >= S3_SERVER )
         {
             DIAG_InitParameter( );
+            CAN_RX_SetEnable(&CAN_CH0_CanMsgOp, CAN_N_RX_Enable);
+            CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);//S3超时解除
         }
         else
         {
@@ -451,6 +463,9 @@ void UDS_Service_10_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A
             S3_ServerEN = 0;
             SessionType = DefaultSession;
             DIAG_InitParameter();
+            CAN_RX_SetEnable(&CAN_CH0_CanMsgOp, CAN_N_RX_Enable);
+            CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);//切会话解除
+
 
             if (AbleResponseType == Ser10BanResponse)
             {
@@ -673,7 +688,7 @@ static const uint8_t Ser22BanResponse = DisableResponseType;
 static const uint8_t Ser22Sub []      = {0xFF};
 static const uint8_t Ser22MinLen []   = {2};
 static const uint8_t Ser22SubLen []   = {2};
-static const uint16_t Ser22DIDList [] = {0xF195, 0xF193, 0xF180, 0xF187, 0x1024, 0x1028};
+static const uint16_t Ser22DIDList [] = {0xF195, 0xF193, 0xF180, 0xF187, 0x1024, 0x1028, 0xF184 };
 static const uint8_t Ser22UnlockLevel []       = {NoNeed};
 static const uint8_t Ser22SupportSession       = DefaultMode | ProgrammingMode | ExtendedDiagnosticMode;
 static const uint8_t Ser22SubSupportSession [] = {DefaultMode | ProgrammingMode | ExtendedDiagnosticMode};
@@ -809,6 +824,14 @@ void UDS_Service_22_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A
             UDS_Service_Response(si, POSITIVE_RSP, DIAG_ID_Tx, 2 + 8, UDS_ISO14229_Transfer);
             break;
 
+        case 0xF184: // UUID
+            for (i = 0; i < 32; i++)
+            {
+                UDS_ISO14229_Transfer[i + 2] = Ser2EDataForDFlash.DID_F184[i];
+            }
+            UDS_Service_Response(0x22, POSITIVE_RSP, DIAG_ID_Tx, 2 + 32, UDS_ISO14229_Transfer);
+            break;
+
         default:
             if (FunorPhy == DIAG_ID_Rx_FUN)
             {
@@ -839,6 +862,74 @@ void UDS_Service_22_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A
     }
 }
 
+void UDS_Service_2E_Indication ( uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data )
+{
+    uint16_t i;
+    uint16_t DID;
+    uint8_t Data[8];
+    uint8_t  Service2EDiagDataLength;
+    uint16_t FunorPhy = 0;
+    Service2EDiagDataLength = A_Length;
+    S3_ServerCnt = 0;
+    FunorPhy = A_TA_type;
+
+    for (i = 0; i < Service2EDiagDataLength; ++i)
+    {
+        UDS_ISO14229_Transfer[i] = *(A_Data + i);
+    }
+    if ( FunorPhy == 0X7DF )
+        return;
+    if ( DiagLockFlag == 0x00 )
+    {
+        NegRes.code = securityAccessDenied; //NRC33
+        UDS_Service_Response ( 0x2E, NEGATIVE_RSP, DIAG_ID_Tx, 1, ( uint8_t * ) ( &NegRes.code ) );
+        return;
+    }
+    if ( Service2EDiagDataLength < 3 )
+    {
+        NegRes.code = incorrectMessageLength; //NRC13
+        UDS_Service_Response ( 0x2E, NEGATIVE_RSP, DIAG_ID_Tx, 1, ( uint8_t * ) ( &NegRes.code ) );
+        return;
+    }
+    if( (SessionType == DefaultSession) || (SessionType == ProgrammingSession))
+    {
+        NegRes.code = serviceNotSupportedInActiveSession; //NRC7F
+        UDS_Service_Response ( 0x2E, NEGATIVE_RSP, DIAG_ID_Tx, 1, ( uint8_t * ) ( &NegRes.code ) );
+        return;
+    }
+    DID = ((uint16_t)UDS_ISO14229_Transfer[0] << 8) | ((uint16_t)UDS_ISO14229_Transfer[1]);
+    switch ( DID )
+    {
+        case 0xF184: // 读指纹数据标识符
+            for (i = 0; i < 33; i++) 
+            {
+                Data[i] = UDS_ISO14229_Transfer[i+2];
+            }
+
+            for (i = 0; i < (sizeof(Ser2EDataForDFlash.DID_F184)); i++)
+            {
+                Ser2EDataForDFlash.DID_F184[i] = Data[i];   
+            }
+	        Ser2EDataForDFlash.Flag = 0x5AA5A77Au;
+            // memcpy(Ser2EDataForDFlash.DID_F184, Data, sizeof(Ser2EDataForDFlash.DID_F184));
+            //擦除扇区
+	        EraseSector (0x500600ul);
+            //App程序状态和22服务数据全写进去
+            ProgramPage (0x500600ul, sizeof(Ser2EDataForDFlash), (uint8_t *)(&Ser2EDataForDFlash));
+            UDS_Service_Response(0x2E, POSITIVE_RSP, DIAG_ID_Tx, 2, UDS_ISO14229_Transfer);
+            break;
+        default:
+            if ( FunorPhy == 0x7df )
+            {
+                return;
+            }
+            NegRes.code = requestOutOfRange;
+            UDS_Service_Response ( 0x2E, NEGATIVE_RSP, DIAG_ID_Tx, 1, ( uint8_t * ) ( &NegRes.code ) );
+            break;
+    }
+}
+
+
 void GetSeed(void)
 {
     uint8_t SeedHigh;

Firmware/Source/UDS/UDS_ISO14229_Services.h

@@ -347,6 +347,14 @@ typedef struct
     uint8_t Filldata[1];
 }DiagDFlashData;
 extern DiagDFlashData DiagDataForDFlash;
+
+typedef struct
+{
+    uint32_t Flag;
+    uint8_t DID_F184[32];
+} Ser2EDFlashData;
+extern Ser2EDFlashData Ser2EDataForDFlash;
+
 typedef struct
 {
     uint32_t Flag;
@@ -364,6 +372,7 @@ typedef struct
 void UDS_Service_10_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
 void UDS_Service_11_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
 void UDS_Service_22_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+void UDS_Service_2E_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
 void UDS_Service_27_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
 void UDS_Service_28_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
 void UDS_Service_3E_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
@@ -389,6 +398,7 @@ uint8_t SerXXNRC7EFilter(const uint8_t *SubSupportSession, uint8_t index);
 uint8_t SerXXNRC7FFilter(uint8_t SupportSession);
 extern void Data_Set_DiagPara(void);
 void Write_App_InValid(uint32_t m32);
+void Data_Read_DiagPara(void);
 void DFlash_init(void);
 
 #endif

Firmware/utility/Boot_Release/变更记录.txt

 ----2024/05/10----
 BOOT文件V1.0
 文件名：TianYing_TY200.080000b_Boot_B1.00_240513.hex
-变更内容：BOOT文件出版提交
\ No newline at end of file
+变更内容：BOOT文件出版提交
+
+----2024/06/02----
+BOOT文件V1.0
+文件名：TY_TY200.080000b_Boot_B1.01_240602.hex
+变更内容：、
+1、由于硬件较慢，连续帧发不出来，增加连续帧的延时，增大STmin
+2、修改内部版本号
\ No newline at end of file