Skip to content

TianYing_ty100
TianYing_ty100
Commit a64b45c7 authored by 李俭双's avatar 李俭双
Browse files
Options

Merge branch 'lijianshuang' into 'dev' 

Lijianshuang

See merge request ty/tianying_ty100!13
parents 14ec65c7 0545fb2e
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2732 additions and 2869 deletions
Firmware/Source/Application/Data_Coolant/Data_Coolant.c
View file @ a64b45c7
......@@ -106,7 +106,7 @@ void Data_Coolant_Temp_Display ( void )
{
if(SYS_OPR_STAT_IGN_ON)
{
if (Common_GetIgnOnTime() >= 3000)
if (Common_GetIgnOnTime() < 3000)
{
DataCoolantTemp_Dis.u8_Uptimer = CoolantSelfCheckFlashtimer;
DataCoolantTemp_Dis.u8_Downtimer = CoolantSelfCheckFlashtimer;
......@@ -184,7 +184,7 @@ void Data_Coolant_Temp_Display ( void )
{
DataCoolantTemp_Dis.u8_Warnflg = 2;
}
else if(DataCoolantTemp.Value >= 112)
else if(DataCoolantTemp.Value <= 112)
{
DataCoolantTemp_Dis.u8_Warnflg = 0;
}
......
Firmware/Source/Application/Data_TPMS/Data_TPMS.c
View file @ a64b45c7
......@@ -39,7 +39,7 @@ void Data_TPMS_Processing_Service ( void )
TPMS.Front_TPMS_Valid = 0;
TPMS.Rear_TPMS_Valid = 1;
TPMS.Front_Press_Value = 99;
TPMS.Rear_Press_Value *= Rear_TPMS ;
TPMS.Rear_Press_Value = Rear_TPMS * 275;
TPMS.Rear_Press_Value /= 10 ;
if(TPMS.Rear_Press_Value > 99)
{
......@@ -59,7 +59,7 @@ void Data_TPMS_Processing_Service ( void )
TPMS.Front_TPMS_Valid = 1;
TPMS.Rear_TPMS_Valid = 0;
TPMS.Rear_Press_Value = 99;
TPMS.Front_Press_Value *= Front_TPMS ;
TPMS.Front_Press_Value = Front_TPMS *275 ;
TPMS.Front_Press_Value /= 10 ;
if(TPMS.Front_Press_Value > 99)
{
......@@ -87,14 +87,14 @@ void Data_TPMS_Processing_Service ( void )
{
TPMS.Front_TPMS_Valid = 1;
TPMS.Rear_TPMS_Valid = 1;
TPMS.Front_Press_Value *= Front_TPMS ;
TPMS.Front_Press_Value = Front_TPMS * 275 ;
TPMS.Front_Press_Value /= 10 ;
if(TPMS.Front_Press_Value > 99)
{
TPMS.Front_Press_Value = 99;
}
TPMS.Rear_Press_Value *= Rear_TPMS ;
TPMS.Rear_Press_Value = Rear_TPMS * 275;
TPMS.Rear_Press_Value /= 10 ;
if(TPMS.Rear_Press_Value > 99)
{
......@@ -143,12 +143,13 @@ uint8_t Get_Rear_TPMS_Sig_Vaild (void)
{
return TPMS.Rear_TPMS_Valid;
}
//10倍
uint16_t Get_Front_TPMS_Sig_Value (void)
{
uint16_t value = 0;
if (TPMS.TPMS_Unit == 1)
{
value = Data_Bar_To_Psi(TPMS.Front_Press_Value);
value = Data_Bar_To_Psi(TPMS.Front_Press_Value) / 10;
if(value > 99)
{
value = 99;
......@@ -165,11 +166,12 @@ uint16_t Get_Rear_TPMS_Sig_Value (void)
uint16_t value = 0;
if (TPMS.TPMS_Unit == 1)
{
value = Data_Bar_To_Psi(TPMS.Rear_Press_Value) / 10;
if(value > 99)
{
value = 99;
}
value = Data_Bar_To_Psi(TPMS.Rear_Press_Value);
}
else
{
......
Firmware/Source/Application/FaultCode/FaultCode.c
View file @ a64b45c7
#include "FaultCode\FaultCode.h"
#include "Application.h"
uint8_t DTC_Amnt_Number = 0; //Diag402ReceiveDTCNumberTemp
uint8_t DTC_Amnt_Number_Count = 0; //Diag402ReceiveDTCCount
uint8_t FaultCode_Number = 0; //Diag402ReceiveDTCNumber
uint32_t DTC_Data[254] = {0}; //Diag402ReceiveDTC
uint32_t DTC_Data_Count[254] = {0}; //Diag402ReceiveDTCTemp
uint32_t FaultCode_Data[254] = {0}; //DtcCurFaultGrpup
uint8_t FaultCode_Compare(uint32_t FaultCode, uint32_t* CodeList, uint8_t len)
{
uint8_t i = 0;
uint8_t result = 0;
for(i = 0; i < len; i++)
{
if(FaultCode == CodeList[i])
{
result = 1;
}
}
return result;
}
void ECU_FaultCode_Processing_Service ( void )
{
uint8_t DTCH1 = 0;
uint8_t DTCM1 = 0;
uint8_t DTCH2 = 0;
uint8_t DTCM2 = 0;
uint32_t DTC1 = 0;
uint32_t DTC2 = 0;
uint32_t i = 0;
if ( Common_Get_IG_Sts() == COMMON_POWER_ON )
{
if(CAN_MSG_Status(&CAN_CH0_CanMsgOp, CAN_CH0_ID_CAN_0x402_Msg_Count) == CAN_SIG_LOST)
{
memset (FaultCode_Data, 0, FaultCode_Number);
FaultCode_Number = 0;
}
else
{
DTCH1 = Get_CAN_CH0_ID_402_Sig_ECU_DTCH1();
DTCM1 = Get_CAN_CH0_ID_402_Sig_ECU_DTCM1();
DTCH2 = Get_CAN_CH0_ID_402_Sig_ECU_DTCH2();
DTCM2 = Get_CAN_CH0_ID_402_Sig_ECU_DTCM2();
DTC_Amnt_Number = Get_CAN_CH0_ID_402_Sig_ECU_DTCAmnt();
if (((DTCH1 & 0xF0) >> 4) >= 0xA)
{
DTC1 |= ((DTCH1 & 0xF0) >> 4) + 3;
}
else
{
DTC1 |= (DTCH1 & 0xF0) >> 4 ;
}
DTC1 <<= 8;
if ((DTCH1 & 0xF) >= 0xA)
{
DTC1 |= (DTCH1 & 0xF) + 3;
}
else
{
DTC1 |= DTCH1 & 0xF ;
}
DTC1 <<= 8;
if (((DTCM1 & 0xF0) >> 4) >= 0xA)
{
DTC1 |= ((DTCM1 & 0xF0) >> 4) + 3;
}
else
{
DTC1 |= (DTCM1 & 0xF0) >> 4 ;
}
DTC1 <<= 8;
if ((DTCM1 & 0xF) >= 0xA)
{
DTC1 |= (DTCM1 & 0xF) + 3;
}
else
{
DTC1 |= DTCM1 & 0xF ;
}
if (((DTCH2 & 0xF0) >> 4) >= 0xA)
{
DTC2 |= ((DTCH2 & 0xF0) >> 4) + 3;
}
else
{
DTC2 |= (DTCH2 & 0xF0) >> 4 ;
}
DTC2 <<= 8;
if ((DTCH2 & 0xF) >= 0xA)
{
DTC2 |= (DTCH2 & 0xF) + 3;
}
else
{
DTC2 |= DTCH2 & 0xF ;
}
DTC2 <<= 8;
if (((DTCM2 & 0xF0) >> 4) >= 0xA)
{
DTC2 |= ((DTCM2 & 0xF0) >> 4) + 3;
}
else
{
DTC2 |= (DTCM2 & 0xF0) >> 4 ;
}
DTC2 <<= 8;
if ((DTCM2 & 0xF) >= 0xA)
{
DTC2 |= (DTCM2 & 0xF) + 3;
}
else
{
DTC2 |= DTCM2 & 0xF ;
}
if(DTC_Amnt_Number == 0)
{
for (i = 0; i < 255; i++)
{
FaultCode_Data[i] = 0;
}
}
if(DTC_Amnt_Number_Count < DTC_Amnt_Number)
{
if ((DTC1 != 0) && (FaultCode_Compare(DTC1, &DTC_Data_Count[0], DTC_Amnt_Number_Count) == 0))
{
DTC_Data_Count[DTC_Amnt_Number_Count] = DTC1;
DTC_Amnt_Number_Count ++;
}
}
if(DTC_Amnt_Number_Count < DTC_Amnt_Number)
{
if ((DTC2 != 0) && (FaultCode_Compare(DTC2, &DTC_Data_Count[0], DTC_Amnt_Number_Count) == 0))
{
DTC_Data_Count[DTC_Amnt_Number_Count] = DTC2;
DTC_Amnt_Number_Count ++;
}
}
if (DTC_Amnt_Number_Count == DTC_Amnt_Number)
{
for(i = 0; i < DTC_Amnt_Number_Count; i++)
{
DTC_Data[i] = DTC_Data_Count[i];
DTC_Data_Count[i] = 0;
}
FaultCode_Number = DTC_Amnt_Number;
DTC_Amnt_Number_Count = 0;
for(i = 0; i < FaultCode_Number; i++)
{
FaultCode_Data[i] = DTC_Data[i];
}
}
}
}
else
{
memset (FaultCode_Data, 0, FaultCode_Number);
FaultCode_Number = 0;
}
}
Firmware/Source/Application/FaultCode/FaultCode.h
View file @ a64b45c7
......@@ -3,7 +3,8 @@
#include "Application.h"
#include "common.h"
extern uint32_t FaultCode_Data[254] ;
extern uint8_t FaultCode_Number;
uint8_t FaultCode_Compare(uint32_t FaultCode, uint32_t* CodeList, uint8_t len);
void ECU_FaultCode_Processing_Service ( void );
#endif
\ No newline at end of file
Firmware/Source/Application/GUI_Display/GUI_Display.c
View file @ a64b45c7
#include "GUI_Display\GUI_Display.h"
#include "SEG_DISPLAY\SEG_DISPLAY.h"
#include "Application.h"
void Gauge_VSpeed_Display(void)
{
uint16_t VSpeedDisplayValue = 0;
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
if ( Get_VechileSpeedValid( ) == 1u )
{
VSpeedDisplayValue = Get_DispVechileSpeed( ) / 10u;
SEG_SET_VSpeed_NUM(1u, VSpeedDisplayValue);
}
else
{
VSpeedDisplayValue = 0u;
SEG_SET_VSpeed_NUM(1u, VSpeedDisplayValue);
}
}
else
{
VSpeedDisplayValue = 0u;
SEG_SET_VSpeed_NUM(0u, 0u);
}
}
void Gauge_Clock_Display(void)
{
uint8_t PageType_DIS = 0;
......@@ -31,7 +9,7 @@ void Gauge_Clock_Display(void)
{
PageType_DIS = Get_Current_PageType();
// LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Screen_Time, 100);
LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Screen_Time, LED_ON);
if ( PageType_DIS == 1 )
{
......@@ -64,67 +42,14 @@ void Gauge_Clock_Display(void)
else
{
SEG_SET_Clock(0, 0, 0, 0, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Screen_Time, 0);
LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Screen_Time, LED_OFF);
}
}
void Gauge_Trip_Display(void)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
SEG_SET_TRIP_NUM(1u, Get_Trip_Value());
}
else
{
SEG_SET_TRIP_NUM(0u, 0u);
}
}
void Gauge_ODO_Display(void)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
SEG_SET_ODO_NUM(1u, Get_ODO_Value() / 10u);
}
else
{
SEG_SET_ODO_NUM(0u, 0u);
}
}
void Gauge_FuelDial_Display(void)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
SEG_SET_FuelDial(1, Get_CurFuelSetp());
}
else
{
SEG_SET_FuelDial(0, 0);
}
}
void Gauge_EspeedDial_Display(void)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
SEG_SET_EspeedDial(1, Get_DispEngineSpeed()/1000, Get_DispEngineSpeed());
}
else
{
SEG_SET_EspeedDial(0, 0, 0);
}
}
void Gauge_Frame_Display(void)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
{
SEG_SET_Frame(1);
}
else
{
SEG_SET_Frame(0);
}
}
void Clear_Bu98(void)
......@@ -141,7 +66,7 @@ void Clear_Bu98(void)
void Gauge_Service(void)
{
static uint16_t VSpeed_Count = 0u;
Gauge_Frame_Display();
uint32_t i = 0;
if (ClearODO_Flag == 1)
{
if ( Common_Get_IG_Sts( ) == COMMON_POWER_ON )
......@@ -151,16 +76,6 @@ void Gauge_Service(void)
else
{
Clear_Bu98();
//RTE_GPIO_Set_Level(VSPEED_TEN_OUT, 0);
//RTE_GPIO_Set_Level(VSPEED_HUNDREDS_OUT, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_29_MPH, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_30_KM_H, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Key_ISTOP, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_02_Normal_Voltage, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_High_Low_Voltage, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_04_Fuel_W, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Fuel_Y, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Screen_Time, 0);
}
}
else
......@@ -169,6 +84,12 @@ void Gauge_Service(void)
{
if (Common_GetIgnOnTime() >= 3000)
{
//for(i = 0; i < BU98R10_DDRAM_SIZE; i ++)
//{
// BU98R10Chip0DDRAM.Byte[i] = 1;
// BU98R10Chip1DDRAM.Byte[i] = 1;
//}
i = Get_Trip_Value();
if (VSpeed_Count < 3)
{
VSpeed_Count++;
......@@ -176,14 +97,16 @@ void Gauge_Service(void)
else
{
VSpeed_Count = 0;
Gauge_VSpeed_Display();
SEG_SET_VSpeed_NUM(1u, Get_DispVechileSpeed( ) / 10u,Get_Dis_KM_Unit());
}
Gauge_ODO_Display();
SEG_SET_ODO_TRIP_FAULTCODE_TCS_DIS(Get_Dis_KM_Unit(), Get_ODO_Value() / 10u, Get_Trip_Value());
Gauge_Clock_Display();
Gauge_Trip_Display();
Gauge_FuelDial_Display();
Gauge_EspeedDial_Display();
SEG_SET_FuelDial(1, Get_CurFuelSetp());
SEG_SET_EspeedDial(1, Get_DispEngineSpeed()/500);
SEG_SET_CoolantDial(1, GET_DataCoolantTempSegDisp(), GET_DataCoolantTempValueDisp(), GET_DataCollantTempSegValid());
SEG_SET_Voltage_NUM(1, Get_Battery_Voltage());
SEG_SET_TPMS_NUM(1, Get_Front_TPMS_Sig_Value(), Get_Rear_TPMS_Sig_Value(), Get_Dis_Tpms_Unit(),Get_Front_TPMS_Sig_Vaild(), Get_Rear_TPMS_Sig_Vaild());
}
else
{
......@@ -193,16 +116,7 @@ void Gauge_Service(void)
else
{
Clear_Bu98();
//RTE_GPIO_Set_Level(VSPEED_TEN_OUT, 0);
//RTE_GPIO_Set_Level(VSPEED_HUNDREDS_OUT, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_29_MPH, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_30_KM_H, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Key_ISTOP, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_02_Normal_Voltage, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_High_Low_Voltage, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_04_Fuel_W, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Fuel_Y, 0);
//LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Screen_Time, 0);
}
}
......
Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.h
View file @ a64b45c7
......@@ -7,57 +7,40 @@
typedef enum
{
SEG_LED_Voltage = 0u,
SEG_LED_Auto_Start_Stop,
SEG_LED_Fuel,
SEG_LED_MAX
em_SEG_High_Beam,
em_SEG_FAULT_ELECTROSPRAY,
em_SEG_ABS,
em_SEG_Oil_Pressure,
em_SEG_Bluetooth,
em_SEG_TCS,
em_SEG_Auto_Start_Stop,
//em_SEG_Keys,
em_SEG_Upkeep,
em_SEG_Low_Batt_Vol,
em_SEG_Lateral_Strut,
em_SEG_Tire_Pressure_Alarm,
em_SEG_Turn_Left,
em_SEG_Turn_Right,
em_SEG_Coolant,
em_SEG_Fuel,
SEG_LED_MAX,
} SEG_LED_Idx_t;
enum
{
Gear_P = 0, //P
Gear_R, //R
Gear_N, //N
Gear_D, //D
};
/**@brief 边框线显示函数*/
_Fun_Res SEG_SET_Frame(uint8_t m_Flag);
/**@brief 挡位显示函数*/
_Fun_Res SEG_SET_GEAR(uint8_t m_Gear_Flag,uint8_t m_Gear);
/**@brief 电量表盘显示函数*/
_Fun_Res SEG_SET_EleDial(uint8_t m_Flag,uint8_t m_SEG,uint8_t m_NUM);
/**@brief 燃油表盘显示函数*/
_Fun_Res SEG_SET_FuelDial(uint8_t m_Flag,uint8_t m_SEG);
/**@brief 转速表盘显示函数*/
_Fun_Res SEG_SET_EspeedDial(uint8_t m_Flag, uint8_t m_SEG, uint16_t m_NUM);
/**@brief 功率表盘显示函数*/
_Fun_Res SEG_SET_PowerDial(uint8_t m_Flag,uint8_t m_SEG,uint8_t m_Sign,uint8_t m_NUM);
/**@brief 续航里程显示函数*/
_Fun_Res SEG_SET_DTE_NUM(uint8_t m_Flag, uint16_t m_NUM);
/**@brief 车速8字段显示函数*/
_Fun_Res SEG_SET_VSpeed_NUM(uint8_t m_Flag , uint16_t m_NUM);
/**@brief L8字段显示函数*/
_Fun_Res SEG_SET_L8_NUM(uint8_t m_Flag , uint8_t m_NUM);
/**@brief 总计里程显示函数*/
_Fun_Res SEG_SET_ODO_NUM(uint8_t m_Flag,uint32_t m_NUM);
/**@brief 小计里程显示函数*/
_Fun_Res SEG_SET_TRIP_NUM(uint8_t m_Flag,uint16_t m_NUM);
/**@brief 时间显示函数*/
_Fun_Res SEG_SET_Clock(uint8_t m_hour, uint8_t m_minute, uint8_t m_icon, uint8_t m_Flag1, uint8_t m_Flag2 );
void SEG_SET_DTC_NUM(uint32_t num);
void SEG_SET_LED_STS(uint8_t LED_NUM, uint8_t m_Flag);
void SEG_SET_FuelDial(uint8_t m_Flag, uint8_t m_SEG);
void SEG_SET_EspeedDial(uint8_t m_Flag, uint8_t m_SEG);
void SEG_SET_CoolantDial(uint8_t m_Flag, uint8_t m_SEG, uint16_t m_Num, uint8_t m_flash);
void SEG_SET_VSpeed_NUM(uint8_t m_Flag, uint16_t m_NUM, uint8_t m_Unit);
void SEG_SET_Voltage_NUM(uint8_t m_Flag, uint16_t m_NUM);
void SEG_SET_TPMS_NUM(uint8_t m_Flag, uint16_t m_NUM1, uint16_t m_NUM2, uint8_t m_Unit, uint8_t m_valid1, uint8_t m_valid2);
void SEG_SET_ODO_TRIP_FAULTCODE_TCS_DIS(uint8_t m_Uint, uint32_t m_NUM_ODO, uint32_t m_NUM_TRIP);
void SEG_SET_Clock(uint8_t m_hour, uint8_t m_minute, uint8_t m_icon, uint8_t m_Flag1, uint8_t m_Flag2);
void Check_SEG_Display(void);
......@@ -69,14 +52,8 @@ extern uint8_t Espeed_check_SEG_step;
#define IC_SEG_ON 0x07u
#define IC_SEG_GREY 0x01u
/**@brief 指示灯显示函数*/
_Fun_Res SEG_SET_LED_STS(uint8_t LED_NUM , uint8_t m_Flag);
//扫盘用
_Fun_Res SEG_Scan_SET_EleDial(uint8_t m_SEG);
_Fun_Res SEG_Scan_SET_PowerDial(uint8_t m_SEG);
void SEG_Scan_SET_FuelDial(void);
void SEG_Scan_SET_Fuel_Coolant_Dial(uint8_t coolant);
void SEG_Scan_SET_EspeedDial(void);
extern void Checkself_Init (void);
......
Firmware/Source/Component/Key/Key_user.c
View file @ a64b45c7
......@@ -130,11 +130,11 @@ void Key_KL30_Init_EXample(void)
Key_KL30_Init(&u8KeyRamData[0], stKeyAttribute, &stKeyInitTem);
Key_Parameter_Set_Short_Press_1_Time(50U,1000U);
Key_Parameter_Set_Short_Press_2_Time(3000U,5000U);
Key_Parameter_Set_Short_Press_2_Time(3000U,9000U);
Key_Parameter_Set_Long_Press_1_Time(7000U);
Key_Parameter_Set_Long_Press_2_Time(8000U);
Key_Parameter_Set_Long_Press_3_Time(9000U);
//Key_Parameter_Set_Long_Press_1_Time(7000U);
//Key_Parameter_Set_Long_Press_2_Time(8000U);
//Key_Parameter_Set_Long_Press_3_Time(9000U);
Key_Parameter_Set_Long_Press_4_Time(10000U);
}
void Key_Wakeup_Init_EXample(void)
......@@ -146,11 +146,11 @@ void Key_Wakeup_Init_EXample(void)
Key_Wakeup_Init(&u8KeyRamData[0], stKeyAttribute, &stKeyInitTem);
Key_Parameter_Set_Short_Press_1_Time(50U,1000U);
Key_Parameter_Set_Short_Press_2_Time(3000U,5000U);
Key_Parameter_Set_Short_Press_2_Time(3000U,9000U);
Key_Parameter_Set_Long_Press_1_Time(7000U);
Key_Parameter_Set_Long_Press_2_Time(8000U);
Key_Parameter_Set_Long_Press_3_Time(9000U);
//Key_Parameter_Set_Long_Press_1_Time(7000U);
//Key_Parameter_Set_Long_Press_2_Time(8000U);
//Key_Parameter_Set_Long_Press_3_Time(9000U);
Key_Parameter_Set_Long_Press_4_Time(10000U);
}
......@@ -158,7 +158,7 @@ void Key_Wakeup_Init_EXample(void)
void KEY_LEFT_EVENT_NONE_Service(void)
{
MenuInfor.Back_Time_Left++;
if(MenuInfor.Back_Time_Left > BACK_MENU_TIME)
if((MenuInfor.Back_Time_Left > BACK_MENU_TIME) &&(PageType != Page_DTC))
{
MenuInfor.Back_Time_Left = BACK_MENU_TIME;
MenuInfor.Back_Time_Left_Flag = 1;
......@@ -305,6 +305,11 @@ void Key_Left_Long_Press(void)
MenuData.Tcs_Val = 0;//off
}
}
if(PageType == Page_Trip)
{
Data_Clear_Trip_All();
}
}
......@@ -359,6 +364,10 @@ void MenuData_Unit_Init(void)
MenuData.Tpms_Unit = 0;
MenuData.Tcs_Val = 1;
}
void MenuData_TCS_Init(void)
{
MenuData.Tcs_Val = 1;
}
uint8_t ClearODO_Flag = 0;
void TYW_RESET_ODO(void)
......
Firmware/Source/Component/Key/Key_user.h
View file @ a64b45c7
......@@ -63,4 +63,5 @@ uint8_t Get_Dis_Tcs_Val(void);
void Key_Check_Service(void);
void MenuData_Unit_Init(void);
void Maintain_Reset_Service(void);
void MenuData_TCS_Init(void);
#endif
Firmware/Source/Component/Line_In/Line_In_user.c
View file @ a64b45c7
......@@ -8,7 +8,7 @@ const Line_In_Attribute_st g_stLineInAttribute[LINE_IN_MAX] =
{
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 20U, 20U, Get_LINE_IN_TurnLeft, },
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 20U, 20U, Get_LINE_IN_TurnRight, },
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 60U, 20U, Get_LINE_IN_HighBeam, },
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 60U, 20U, Get_LINE_IN_HighBeam, },
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 100U, 20U, Get_LINE_IN_FAULT_ELECTROSPRAY, },
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 100U, 20U, Get_LINE_IN_Fault_ABS, },
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 100U, 20U, Get_LINE_IN_Oil_Pressure, },
......
Firmware/Source/Component/PowerManagement/PowerManag_user.c
View file @ a64b45c7
......@@ -104,6 +104,7 @@ static void Power_Wakeup_Init(void)
LINE_IN_Init();
Key_KL30_Init_EXample();
Line_In_KL15_ON_Init();
MenuData_TCS_Init();
//Light_Sensor_Init_Example();//注意顺序1
LED_Driver_Init_Example();//注意顺序2
Fuel_KL30_Init();
......@@ -145,6 +146,7 @@ static void Power_IG_ON_Init(void)
Telltales_UserInit();
Fuel_KL15_Init();
Data_Voltage_Init();
MenuData_TCS_Init();
Data_Coolant_Temp_KL15_Init();
}
......
Firmware/Source/System/Sys_Task_List.c
View file @ a64b45c7
......@@ -47,6 +47,7 @@ void Sys_10ms_Tasks(void)
Turn_Left_Right_Lamp();
Fuel_R_Cal(10u);
TYW_Check_Count();
Data_TPMS_Processing_Service();
}
void Sys_20ms_Tasks(void)
......@@ -56,7 +57,7 @@ void Sys_20ms_Tasks(void)
Data_Vehicle_Speed_Processing_Service();
Data_Engine_Speed_Processing_Service();
Data_Coolant_Temp_Processing_Service();
Data_TPMS_Processing_Service();
}
void Sys_50ms_Tasks(void)
......@@ -82,6 +83,7 @@ void Sys_100ms_Tasks(void)
Services_Mileage_Callback();
Data_Voltage_Processing_Service();
S3_ServerCNTT();
ECU_FaultCode_Processing_Service();
if (u8LEDDriverCheckCount >= 10U)
{
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment