Merge branch 'lijianshuang' into 'dev'

Lijianshuang

See merge request ty/tianying_ty100!73

Firmware/Source/Application/BackLight/BackLight.c

@@ -48,9 +48,16 @@ void BackLight_Process(void)
         //    }
         //}
         //if ( LED_Turnon == 5 )
-        if (Line_In_Get_Status(LINE_IN_Little_Lamp))
+        if (Common_GetIgnOnTime() >= 3000)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_NIGHT);
+            if (Line_In_Get_Status(LINE_IN_Little_Lamp))
+            {
+                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_NIGHT);
+            }
+            else
+            {
+                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_DAY);
+            }
         }
         else
         {

Firmware/Source/Application/Data_Coolant/Data_Coolant.c

@@ -50,28 +50,29 @@ typedef struct
 } HYS_Seg_Table_st_t;
 const HYS_Seg_Table_st_t stHYSSegTableTemp[7] =
     {
-        {0U, 470U},    // 0
-        {500U, 590U},   // 1
-        {620U, 770U},   // 2
-        {800U, 950U},   // 3
-        {980U, 1120U},  // 4
-        {1150U, 1990U}, // 5
-        {1990U, 2000U}, // 6
+        {0U, 4700U},    // 0
+        {5000U, 5900U},   // 1
+        {6200U, 7700U},   // 2
+        {8000U, 9500U},   // 3
+        {9800U, 11200U},  // 4
+        {11500U, 19900U}, // 5
+        {19900U, 20000U}, // 6
 };
 uint32_t u32CoolantDataTimeCount = 0UL;
 uint32_t u32ColCurNum = 0UL; /*阻尼数显*/
+    uint32_t u32CoolantNum = 0UL;/*当前实际数据，与显示数值不完全一致*/
 /*
 u32CoolantDir：0：下行，1：上行 2：无变化
 
 */
 uint32_t Data_Coolant_Cal_Num(uint32_t u32CoolantCurSeg, uint32_t u32CoolantDir, uint32_t u32CoolantRemTime, uint32_t u32CoolantCurNum, uint32_t u32CoolantDesNum)
 {
-    uint32_t u32CoolantNum = u32CoolantCurNum;
     uint32_t u32CoolantNumMax = 0UL;
     uint32_t u32CoolantNumMin = 0UL;
     uint32_t u32CoolantSegDesNum = 0UL;
     uint32_t u32CoolantCalBuf = 0UL;
     uint32_t u32CoolantCalBuf1 = 0UL;
+    uint32_t u32CoolantCalResult = u32CoolantCurNum;
 
     /*计算当前格对应的目标数值*/
     /*当前格数对应的数值范围，目标数值是否在这个范围内，如果在就直接用目标值。如果不在就根据上下行选择该范围内的极大和极小值。*/
@@ -138,17 +139,52 @@ uint32_t Data_Coolant_Cal_Num(uint32_t u32CoolantCurSeg, uint32_t u32CoolantDir,
                     u32CoolantNum = u32CoolantSegDesNum;
                 }
             }
+        u32CoolantCalResult = u32CoolantNum;
+        if (u32CoolantDir == 0) // down
+        {
+                // uint32_t u32CoolantCalBuf2 = 0UL;
+                //             if (u32CoolantNum>u32CoolantCurNum)
+                //             {
+                //                u32CoolantCalBuf2 =  u32CoolantNum-u32CoolantCurNum;
+                //             }
+                //             else
+                //             {
+                //                u32CoolantCalBuf2 =  u32CoolantCurNum-u32CoolantNum;
+                                
+                //             }
+                //             if (u32CoolantCalBuf2>=100)
+                //             {
+                                
+                //            u32CoolantNum+=99UL;
+                //             }
+
+             if ((u32CoolantNum+99)>=u32CoolantCurNum)
+             {
+             u32CoolantCalResult= u32CoolantCurNum;
+             }
+             else
+             {
+                
+             u32CoolantCalResult= ((u32CoolantNum+99)/100*100);
+             }
+             
+            
+        }
+        
+
         }
         else // 0
         {
             u32CoolantNum = u32CoolantSegDesNum;
+            u32CoolantCalResult = u32CoolantNum;
         }
     }
 
     /*根据目标数值计算每个变化周期内数值变化的大小，*/
     /*根据目标数值以及剩余时间，修改当前显示值*/
 
-    return u32CoolantNum;
+   // return u32CoolantNum;
+    return u32CoolantCalResult;
 }
 
 void Data_Coolant_Temp_Processing_Service(void)
@@ -278,7 +314,7 @@ void Data_Coolant_Temp_Display ( void )
         
         if(DataCoolantTemp_Dis.u8_CurSeg > DataCoolantTemp_Dis.u8_DestSeg )
         {
-            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 0, (DataCoolantTemp_Dis.u8_Downtimer - DataCoolantTemp_Dis.u8_DownFlashtimer), u32ColCurNum, DataCoolantTemp.Value*10);
+            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 0, (DataCoolantTemp_Dis.u8_Downtimer - DataCoolantTemp_Dis.u8_DownFlashtimer), u32ColCurNum, DataCoolantTemp.Value*100);
             DataCoolantTemp_Dis.u8_UpFlashtimer = 0; 
             DataCoolantTemp_Dis.u8_Holdtimer = 0; 
             DataCoolantTemp_Dis.u8_DownFlashtimer++;
@@ -290,7 +326,7 @@ void Data_Coolant_Temp_Display ( void )
         }
         else if (DataCoolantTemp_Dis.u8_CurSeg < DataCoolantTemp_Dis.u8_DestSeg)
         {
-            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 1, (DataCoolantTemp_Dis.u8_Uptimer - DataCoolantTemp_Dis.u8_UpFlashtimer), u32ColCurNum, DataCoolantTemp.Value*10);
+            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 1, (DataCoolantTemp_Dis.u8_Uptimer - DataCoolantTemp_Dis.u8_UpFlashtimer), u32ColCurNum, DataCoolantTemp.Value*100);
             DataCoolantTemp_Dis.u8_DownFlashtimer = 0;
             DataCoolantTemp_Dis.u8_Holdtimer = 0;
             DataCoolantTemp_Dis.u8_UpFlashtimer++;
@@ -311,7 +347,7 @@ void Data_Coolant_Temp_Display ( void )
             }
             /*目标格和当前格一致时，数显如何处理*/
             /*5S后更新为目标数值*/
-            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 2, (CoolantFlashtimer-DataCoolantTemp_Dis.u8_Holdtimer ), u32ColCurNum, DataCoolantTemp.Value*10);
+            u32ColCurNum = Data_Coolant_Cal_Num(DataCoolantTemp_Dis.u8_CurSeg, 2, (CoolantFlashtimer-DataCoolantTemp_Dis.u8_Holdtimer ), u32ColCurNum, DataCoolantTemp.Value*100);
         }
 
         // warning
@@ -462,7 +498,7 @@ uint16_t GET_DataCoolantTempValueDisp(void)
 }
 uint16_t GET_DataCoolantSegValue(void)
 {
-    return u32ColCurNum/10;
+    return (u32ColCurNum)/100;
 }
 uint8_t GET_DataCollantTempValueValid(void)
 {

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -208,7 +208,11 @@ static void Power_Sleep_Init(void)
     LED_Driver_Service();
     Analog_Signal_Conv_Stop();
     UART_DeInit(UART0);
-    RTE_DEEPSLEEP_Enable();
+    //if(RTE_GPIO_Get_Level(WAKEUP_KL15_In) == 0)
+    {
+        RTE_DEEPSLEEP_Enable();
+    }
+    
 }
 
 static Power_Status_em Power_Stay_ON(void)

Firmware/Source/Device/Cmsemicon/BAT32A239/Library/Driver/src/cgc.c

@@ -297,9 +297,9 @@ void CGC_HSEConfig(OSC_Pin_Mode_t main, OSC_Speed_Mode_t amph)
 /* Clock switching needs to be executed in SRAM */
 
 #if defined (__CC_ARM)
-#pragma arm section code = "sram_code"   // Arm Compiler 5
+#pragma arm section code = "RW_FUNC_PLL"   // Arm Compiler 5
 #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION > 6010050)
-#pragma clang section text = "sram_code" // Arm Compiler 6
+#pragma clang section text = "RW_FUNC_PLL" // Arm Compiler 6
 #endif
 
 #if defined(__ICCARM__)

Firmware/Source/UDS/UDS_ISO14229_Services.h

@@ -311,13 +311,13 @@
 #define CheckSumErr       7    // Checksum Error
 #define UnknownPartID     8    // Unknown Part ID
 
-#define SWV 0x114 // 0x100 = 1.00 software version 软件版本号
+#define SWV 0x115 // 0x100 = 1.00 software version 软件版本号
 #define HWV 0x103 // 0x100 = 1.00 hardware version 硬件版本号
 #define BTV 0x100 // 0x100 = 1.00 bootloader version boot程序版本号
-#define INTLV 0x114 // 0x100 = 1.00 internal version 内部版本号
+#define INTLV 0x115 // 0x100 = 1.00 internal version 内部版本号
 #define PROG_Y 0x24 // 0x24 = 2024年, program year
 #define PROG_M 0x08 // 0x03 = 3月, program month
-#define PROG_D 0x16 // 0x19 = 19日, program day
+#define PROG_D 0x17 // 0x19 = 19日, program day
 
 /******************************************************************************
  Bootloader Variable