#include "RTE_CAN.h"
#include "CAN_Lib.h"
#include "CAN_APP.h"
#include "CAN_Communication_Matrix.h"
#include "Analog_Signals.h"
#include "RSCAN.h"
#include "Check_Ctrl.h"
#include "Display_Info.h"
#include "RTE_GPIO.h"
const uint8_t crc8_table[256] = {
    0x00, 0x1D, 0x3A, 0x27, 0x74, 0x69, 0x4E, 0x53, 0xE8, 0xF5, 0xD2, 0xCF, 0x9C, 0x81, 0xA6, 0xBB,
    0xCD, 0xD0, 0xF7, 0xEA, 0xB9, 0xA4, 0x83, 0x9E, 0x25, 0x38, 0x1F, 0x02, 0x51, 0x4C, 0x6B, 0x76,
    0x87, 0x9A, 0xBD, 0xA0, 0xF3, 0xEE, 0xC9, 0xD4, 0x6F, 0x72, 0x55, 0x48, 0x1B, 0x06, 0x21, 0x3C,
    0x4A, 0x57, 0x70, 0x6D, 0x3E, 0x23, 0x04, 0x19, 0xA2, 0xBF, 0x98, 0x85, 0xD6, 0xCB, 0xEC, 0xF1,
    0x13, 0x0E, 0x29, 0x34, 0x67, 0x7A, 0x5D, 0x40, 0xFB, 0xE6, 0xC1, 0xDC, 0x8F, 0x92, 0xB5, 0xA8,
    0xDE, 0xC3, 0xE4, 0xF9, 0xAA, 0xB7, 0x90, 0x8D, 0x36, 0x2B, 0x0C, 0x11, 0x42, 0x5F, 0x78, 0x65,
    0x94, 0x89, 0xAE, 0xB3, 0xE0, 0xFD, 0xDA, 0xC7, 0x7C, 0x61, 0x46, 0x5B, 0x08, 0x15, 0x32, 0x2F,
    0x59, 0x44, 0x63, 0x7E, 0x2D, 0x30, 0x17, 0x0A, 0xB1, 0xAC, 0x8B, 0x96, 0xC5, 0xD8, 0xFF, 0xE2,
    0x26, 0x3B, 0x1C, 0x01, 0x52, 0x4F, 0x68, 0x75, 0xCE, 0xD3, 0xF4, 0xE9, 0xBA, 0xA7, 0x80, 0x9D,
    0xEB, 0xF6, 0xD1, 0xCC, 0x9F, 0x82, 0xA5, 0xB8, 0x03, 0x1E, 0x39, 0x24, 0x77, 0x6A, 0x4D, 0x50,
    0xA1, 0xBC, 0x9B, 0x86, 0xD5, 0xC8, 0xEF, 0xF2, 0x49, 0x54, 0x73, 0x6E, 0x3D, 0x20, 0x07, 0x1A,
    0x6C, 0x71, 0x56, 0x4B, 0x18, 0x05, 0x22, 0x3F, 0x84, 0x99, 0xBE, 0xA3, 0xF0, 0xED, 0xCA, 0xD7,
    0x35, 0x28, 0x0F, 0x12, 0x41, 0x5C, 0x7B, 0x66, 0xDD, 0xC0, 0xE7, 0xFA, 0xA9, 0xB4, 0x93, 0x8E,
    0xF8, 0xE5, 0xC2, 0xDF, 0x8C, 0x91, 0xB6, 0xAB, 0x10, 0x0D, 0x2A, 0x37, 0x64, 0x79, 0x5E, 0x43,
    0xB2, 0xAF, 0x88, 0x95, 0xC6, 0xDB, 0xFC, 0xE1, 0x5A, 0x47, 0x60, 0x7D, 0x2E, 0x33, 0x14, 0x09,
    0x7F, 0x62, 0x45, 0x58, 0x0B, 0x16, 0x31, 0x2C, 0x97, 0x8A, 0xAD, 0xB0, 0xE3, 0xFE, 0xD9, 0xC4
};
uint8_t CRC8_CheckSum(uint8_t data[], uint8_t len)    
{
    uint8_t crc = 0xFFu;  // 初始值为0xFF

    for (uint8_t i = 0; i < len; i++) {
        crc = crc8_table[crc ^ data[i]];  // 逐字节查表
    }
    
    return crc ^ 0xFFu;  // 最终异或0xFF
}
uint8_t CrcCheckSum(uint8_t *data, uint8_t len)
{
    uint8_t crc        = 0xff;
    uint8_t CRC_POLY   = 0x2f;
    uint8_t crcxor     = 0xff;
    uint8_t bit_index  = 0;
    uint8_t byte_index = 0;

    for ( byte_index = 0; byte_index < len; ++byte_index )
    {
        crc ^= data [ byte_index ];
        for ( bit_index = 0; bit_index < 8; ++bit_index )
        {
            if ( (crc & 0x80) != 0 )
                crc = (crc << 1) ^ CRC_POLY;
            else
                crc = (crc << 1);
        }
    }

    crc = crc ^ crcxor;

    return crc;
}

void Can_Write_Fun_APP(void)
{
}

void Can_Abort_Confirm(uint32_t Identifier, uint8_t TransferStatus)
{
}

void CAN_QuickTimer_Init(void)
{
}

void NODE_26D_SET_Confirm(void)
{
}

void Can_BusOff_Fun(void)
{
}

void Can_BusOffRecover(void)
{
}

void Can_Set_Buff_260(uint8_t CopyData [])
{

}

void Can_Set_Buff_280(uint8_t CopyData [])
{

}

void Can_Set_Buff_380(uint8_t CopyData [])
{

}

void Can_Set_Buff_385(uint8_t CopyData [])
{

}

void Can_Set_Buff_52E(uint8_t CopyData [])
{

}

void Can_Set_Buff_69B(uint8_t CopyData [])
{

}

void Can_Set_Buff_28A(uint8_t CopyData [])
{

}

void Can_Set_Buff_2E1(uint8_t CopyData [])
{

}
void Can_Set_Buff_228(uint8_t CopyData [])
{

}

void Can_Set_Buff_211(uint8_t CopyData [])
{

}
void Can_Set_Buff_341(uint8_t CopyData [])
{

}
void Can_Set_Buff_128(uint8_t CopyData [])
{

}
void Can_Set_Buff_24A(uint8_t CopyData [])
{

}
void Can_Set_Buff_35A(uint8_t CopyData [])
{

}

void Can_Set_Buff_135(uint8_t CopyData [])
{

}
void Can_Set_Buff_153(uint8_t CopyData [])
{

}
void Can_Set_Buff_131(uint8_t CopyData [])
{

}
void Can_Set_Buff_139(uint8_t CopyData [])
{

}
void Can_Set_Buff_431(uint8_t CopyData [])
{

}
void Can_Set_Buff_5e0(uint8_t CopyData [])
{

}
void Can_Set_Buff_236(uint8_t CopyData [])
{

}

void Can_Set_Buff_168(uint8_t CopyData [])
{

}
void Can_Set_Buff_0F6(uint8_t CopyData [])
{

}
void Can_Set_Buff_0E1(uint8_t CopyData [])
{

}
void Can_Set_Buff_036(uint8_t CopyData [])
{

}

void Can_Set_Buff_0B6(uint8_t CopyData [])
{

}

void Can_Set_Buff_320(uint8_t CopyData [])
{

}

void Can_Set_Buff_152(uint8_t CopyData [])
{

}

void Can_Set_Buff_1A1(uint8_t CopyData [])
{

}

void Can_Set_Buff_75F(uint8_t CopyData [])
{
}

void Can_Set_Buff_389(uint8_t CopyData [])
{

}
void init_CAN_Frame(CAN_Frame_st_t* msg, uint32_t can_id, uint8_t can_len, uint8_t can_frame_ide, const uint8_t* data)
{
    for (uint32_t i = 0; i < can_len; i++) {
        msg->unCANData.u8CANData[i] = 0;
    }

    msg->u32CANID = can_id;
    msg->u8CANLEN = can_len;
    // msg->u8CANFrameIDE = can_frame_ide;
    msg->u8CANFrameIDE = 0;
    for (uint32_t i = 0; i < can_len; i++) {
        msg->unCANData.u8CANData[i] = data[i];
    }
}

void can_mid(CAN_Frame_st_t Msg)
{
    CAN_Frame_st_t m_msg;

    init_CAN_Frame(&m_msg, Msg.u32CANID, Msg.u8CANLEN, Msg.u8CANFrameIDE, Msg.unCANData.u8CANData);

    RSCAN0_CH4_Set_FIFO0_Data(&m_msg);
}
uint8_t rolaconter = 0;
void can_submit(void)
{
    //车速
    CAN_Frame_st_t m_msg1;// 车速 母线电流
    uint8_t data1[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C20FFD2


    //氛围灯
    CAN_Frame_st_t m_msg2;// 氛围灯 报警器报警状态 整车状态 自动大灯功能设置
    uint8_t data2[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C10FFD3
    CAN_Frame_st_t m_msg3;// 氛围灯 整车操作状态反馈
    uint8_t data3[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C22FFD2


    //时间
    CAN_Frame_st_t m_msg4;
    uint8_t data4[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C50FFD0


    //功率
    CAN_Frame_st_t m_msg5;// 总电池电压
    uint8_t data5[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C10FFD1

    //故障灯
    CAN_Frame_st_t m_msg6;
    uint8_t data6[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C50FFD2

    CAN_Frame_st_t m_msg8;
    uint8_t data8[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C50FFD2
    // CAN_Frame_st_t m_msg7;
    // uint8_t data7[8] = {0, 0, 0, 0, 0, 0, 0, 0};

    // //故障灯
    // CAN_Frame_st_t m_msg7;
    // uint8_t data7[8] = {0, 0, 0, 0, 0, 0, 0, 0};//0x0C50FFD2
    // // CAN_Frame_st_t m_msg7;
    // // uint8_t data7[8] = {0, 0, 0, 0, 0, 0, 0, 0};
    if((MENU_CHECK_STEP != 6) && (MENU_CHECK_STEP != 10))
    {
        /* ABS故障指示灯 */
        data1[5] = 0x00;

        // data1[7] = CRC8_CheckSum(data1,7);
        init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);
        can_mid(m_msg1);
    }
    switch (MENU_CHECK_STEP)
    {
        case  1:
            /* 车速 */  //22
            data1[0] = 0x01;
            data1[1] = 0x87;
            data1[4] = 0x00;    //车速有效信号
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */  //1000
            data2[2] = 0x0F;
            data2[3] = 0xA0;
            /* 水温 */
            data2[5] = 0X00;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x12;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[2] = 0x01;
            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case  2:
            /* 车速 */
            data1[0] = 0x02;
            data1[1] = 0xF0;
            data1[4] = 0x00;    //车速有效信号
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x1F;
            data2[3] = 0x40;
            /* 水温 */
            data2[5] = 0X01;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x14;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x02;   //SW_Resp
            data4[1] = 0x01;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case  3:
            /* 车速 */
            data1[0] = 0x04;
            data1[1] = 0x60;
            data1[4] = 0x00;    //车速有效信号
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x2E;
            data2[3] = 0xE0;
            /* 水温 */
            data2[4] = 0X60;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x16;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 4:
            /* 车速 */
            data1[0] = 0x05;
            data1[1] = 0xE0;
            data1[4] = 0x00;    //车速有效信号
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x3E;
            data2[3] = 0x80;
            /* 水温 */
            data2[4] = 0XC4;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x00;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x80;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 5:
            /* 车速 */
            data1[0] = 0x06;
            data1[1] = 0xA1;
            data1[4] = 0x00;    //车速有效信号
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x4E;
            data2[3] = 0x20;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x02;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[0] = 0x08;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 6:
            /* 车速 */
            data1[0] = 0x09;
            data1[1] = 0x40;
            data1[4] = 0x00;    //车速有效信号
            /* ABS故障指示灯 */
            data1[5] = 0x01;
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x6D;
            data2[3] = 0x60;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x04;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[0] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x20;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);

            break;
        case 7:
            /* 车速 */
            data1[0] = 0x0B;
            data1[1] = 0xE0;
            data1[4] = 0x00;    //车速有效信号
            /* ABS故障指示灯 */
            data1[5] = 0x00;
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x7D;
            data2[3] = 0x00;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x06;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x04;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 8:
            /* 车速 */
            data1[0] = 0x0D;
            data1[1] = 0xE4;
            data1[4] = 0x00;    //车速有效信号
            /* ABS故障指示灯 */
            data1[5] = 0x00;
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0x9C;
            data2[3] = 0x40;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x0A;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[2] = 0x01;
            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x02;   //SW_Resp
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);

            break;
        case 9:
            /* 车速 */
            data1[0] = 0x0D;
            data1[1] = 0xE4;
            data1[4] = 0x00;    //车速有效信号
            /* ABS故障指示灯 */
            data1[5] = 0x00;
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0xBB;
            data2[3] = 0x80;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x0F;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[2] = 0x01;
            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x00;   //SW_Resp
            data4[1] = 0x00;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[1] = 0x00;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[3] = 0x00;   //
            data8[2] = 0x00;   //TCS
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 10:
            /* 车速 */
            data1[0] = 0x0D;
            data1[1] = 0xE4;
            data1[4] = 0x00;    //车速有效信号
            /* ABS故障指示灯 */
            data1[5] = 0x01;
            // data1[7] = CRC8_CheckSum(data1,7);
            init_CAN_Frame(&m_msg1, 0x12B, 8, 1, data1);

            /* 转速 */
            data2[2] = 0xBB;
            data2[3] = 0x80;
            /* 水温 */
            data2[4] = 0XE0;
            data2[7] = 0x00;    //转速水温有效信号
            init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2);

            /* 时间 */
            data3[3] = 0x10;   //时
            data3[4] = 0;      //分
            data3[5] = 0;      //秒
            init_CAN_Frame(&m_msg3, 0x421, 8, 1, data3);

            /* 左后方盲区侦测指示灯 */
            data4[2] = 0x01;
            /* 左后方盲区侦测指示灯 */
            data4[0] = 0x02;   //SW_Resp
            data4[1] = 0x01;   //BSD_STATUS_L
            init_CAN_Frame(&m_msg4, 0x50A, 8, 1, data4);

            /* 边撑指示灯 */
            data5[1] = 0x80;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg5, 0x200, 8, 1, data5);

            /* 发动机故障指示灯 */
            data6[0] = 0x08;   //BCM_FootBrackeSwSts
            init_CAN_Frame(&m_msg6, 0x111, 8, 1, data6);

            data8[1] = 0x20;   //
            // data8[2] = 0x04;   //禁止TCS,与TCSD只能显示一个
            data8[3] = 0x20;   //
            init_CAN_Frame(&m_msg8, 0x51B, 8, 1, data8);
            break;
        case 11:
            POWER_CTRL_KL30   = 0u;  //B+
            POWER_CTRL_KL15   = 0u;  //KL15
            break;
        //     data1[2] = 0x60;
        //     data1[3] = 0x19;
        //     data1[4] = 0x98;
        //     data1[5] = 0;
        //     data1[6] = (rolaconter<<4);;
        //     data1[7] = CRC8_CheckSum(data1,7);
        //     init_CAN_Frame(&m_msg1, 0x111, 8, 1, data1); 
        
        //     data2[2] = 0x9C;
        //     data2[3] = 0x40;
        //     data2[4] = 0xEC;//水温
        //     init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2); 

        //     data3[1] = 0;
        //     init_CAN_Frame(&m_msg3, 0x113, 8, 1, data3); 

        //     data4[0] = 0;
        //     data4[1] = 1;
        //     data4[2] = 1;
        //     data4[3] = 0;
        //     data4[4] = 0;
        //     data4[5] = 0;
        //     data4[6] = 0;
        //     data4[7] = 0;
        //     init_CAN_Frame(&m_msg4, 0x212, 8, 1, data4); 


        //     data5[1] = 0 ;
        //     init_CAN_Frame(&m_msg5, 0x282, 8, 1, data5); 

        //     data6[4] = 2;
        //     init_CAN_Frame(&m_msg6, 0x091, 8, 1, data6); 
            
        //     break;
        // case 12://进不去
        //     data1[2] = 0x20;
        //     data1[3] = 0x19;
        //     data1[4] = 0x98;
        //     data1[5] = 0;
        //     data1[6] = (rolaconter<<4);;
        //     data1[7] = CRC8_CheckSum(data1,7);
        //     init_CAN_Frame(&m_msg1, 0x111, 8, 1, data1); 
        
        //     data2[2] = 0x9C;
        //     data2[3] = 0x40;
        //     data2[4] = 0xEC;//水温
        //     init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2); 

        //     data3[1] = 0;
        //     init_CAN_Frame(&m_msg3, 0x113, 8, 1, data3); 

        //     data4[0] = 0;
        //     data4[1] = 1;
        //     data4[2] = 1;
        //     data4[3] = 0;
        //     data4[4] = 0;
        //     data4[5] = 0;
        //     data4[6] = 0;
        //     data4[7] = 0;
        //     init_CAN_Frame(&m_msg4, 0x212, 8, 1, data4); 


        //     data5[1] = 0 ;
        //     init_CAN_Frame(&m_msg5, 0x282, 8, 1, data5); 

        //     data6[4] = 2;
        //     init_CAN_Frame(&m_msg6, 0x091, 8, 1, data6); 
        //     break;
        // case 13:
        //     data1[2] = 0;
        //     data1[3] = 0x19;
        //     data1[4] = 0x98;
        //     data1[5] = 0;
        //     data1[6] = (rolaconter<<4);;
        //     data1[7] = CRC8_CheckSum(data1,7);
        //     init_CAN_Frame(&m_msg1, 0x111, 8, 1, data1); 
        
        //     data2[2] = 0x9C;
        //     data2[3] = 0x40;
        //     init_CAN_Frame(&m_msg2, 0x110, 8, 1, data2); 

        //     data3[1] = 0;
        //     init_CAN_Frame(&m_msg3, 0x113, 8, 1, data3); 

        //     data4[0] = 0;
        //     data4[1] = 1;
        //     data4[2] = 1;
        //     data4[3] = 0;
        //     data4[4] = 0;
        //     data4[5] = 0;
        //     data4[6] = 0;
        //     data4[7] = 0;
        //     init_CAN_Frame(&m_msg4, 0x212, 8, 1, data4); 


        //     data5[1] = 1 ;
        //     init_CAN_Frame(&m_msg5, 0x282, 8, 1, data5); 

        //     data6[4] = 2;
        //     init_CAN_Frame(&m_msg6, 0x091, 8, 1, data6); 
        //     break;
        // // case 14:
        // //     // while(1)
        // //     // {
        // //     //     ;//这里让芯片复位要不然的话重新走仪表配置流程有点麻烦，复位的话可以直接省去修改很多条件
        // //     // }
        // //     break;
        default:
            break;
    }
    if(MENU_CHECK_STEP != 0 && MENU_CHECK_STEP<=13)
    {
        can_mid(m_msg1);
        can_mid(m_msg2);
        can_mid(m_msg3);
        can_mid(m_msg4);
        can_mid(m_msg5);
        can_mid(m_msg6);
        can_mid(m_msg8);
        // can_mid(m_msg7);
    }
}
void UID_ADD(void)
{
    for(uint8_t i = 13; i > 1; i--)
    {
        if(UIDNumber2[i] < 9)
        {
            UIDNumber2[i] += 1;
            return;
        }
        else
        {
            UIDNumber2[i] = 0;
        }
    }
}
uint8_t u8get714msg[8];
uint8_t u8getSWmsg[8];
uint8_t u8getUIDmsg[8];
uint8_t SWtestresult = 0;
uint8_t HWtestresult = 0;
uint8_t PNtestresult = 0;
uint8_t ruanjianbanbenhao[8];
uint8_t yingjianbanbenhao[8];
uint8_t ruanjianbanbenhaoin[5];
uint8_t lingjianhao[21];
uint8_t UIDcode1[33];
uint8_t UIDcode2[33];
uint8_t zhenduanstep = 0;
void Get_SW_msg(void);
void Get_HW_msg(void);
void Get_PN_msg(void);
extern uint32_t send0x714time;
uint8_t begin714 = 0;;
uint8_t UIDdelay;
uint8_t SWINtestresult;
void Send_UDS_fuc()
{

        CAN_Frame_st_t m_msg7;
    uint8_t data7[8] = {0, 0, 0, 0, 0, 0, 0, 0};

    if(MENU_CHECK_STEP != 0)
    {
        PNtestresult = 0;
    }
    switch (zhenduanstep)
    {
        case 0:
            if(UIDdelay < 10)
            {
                UIDdelay++;
            }
            else
            {
                data7[0] = 0x03;
                data7[1] = 0x22;
                data7[2] = 0xF1;
                data7[3] = 0x89;
                data7[4] = 0xAA;
                data7[5] = 0xAA;
                data7[6] = 0xAA;
                data7[7] = 0xAA;
                init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
                can_mid(m_msg7);
                zhenduanstep++;
            }
            
            break;
        case 1:
            data7[0] = 0x30;
            data7[1] = 0x00;
            data7[2] = 0x00;
            data7[3] = 0xAA;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            zhenduanstep++;
            SWtestresult = 1;
            Get_SW_msg();
            break;
        case 2:
            Get_SW_msg();
            zhenduanstep++;
        break;
        case 3:
            data7[0] = 0x03;
            data7[1] = 0x22;
            data7[2] = 0xF1;
            data7[3] = 0x93;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            zhenduanstep++;
            break;
        case 4:
            data7[0] = 0x30;
            data7[1] = 0x00;
            data7[2] = 0x00;
            data7[3] = 0xAA;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            zhenduanstep++;
            break;
        case 5:
            Get_HW_msg();
            zhenduanstep++;
            break;
        case 6:
            data7[0] = 0x03;
            data7[1] = 0x22;
            data7[2] = 0xF1;
            data7[3] = 0x8A;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            HWtestresult = 1;
            Get_HW_msg();
            zhenduanstep++;
            break;
        case 7:
            Get_PN_msg();
            data7[0] = 0x30;
            data7[1] = 0x00;
            data7[2] = 0x00;
            data7[3] = 0xAA;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            zhenduanstep++;
            Get_PN_msg();
            break;
        case 8:
            Get_PN_msg();
            data7[0] = 0x03;
            data7[1] = 0x22;
            data7[2] = 0x20;
            data7[3] = 0x24;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            SWINtestresult = 1;
            zhenduanstep++;
            break;
        case 9:
            Get_SWIN_msg();
            data7[0] = 0x30;
            data7[1] = 0x00;
            data7[2] = 0x00;
            data7[3] = 0xAA;
            data7[4] = 0xAA;
            data7[5] = 0xAA;
            data7[6] = 0xAA;
            data7[7] = 0xAA;
            init_CAN_Frame(&m_msg7, 0x7A1, 8, 1, data7); 
            can_mid(m_msg7);
            zhenduanstep++;
            Get_SWIN_msg();
            break;
        case 10:
            Get_SWIN_msg();
            zhenduanstep++;
            break;
        default:
        begin714 = 1;
        break;
    }
}
uint8_t readstep = 0;
void UIDRead(void)
{
    CAN_Frame_st_t m_msg9;
    uint8_t data9[8] = {0, 0, 0, 0, 0, 0, 0, 0};

    switch(readstep)
    {
        case 0:     //读取UID
        data9[0] = 0x03;
        data9[1] = 0x22;
        data9[2] = 0x50;
        data9[3] = 0x01;
        data9[4] = 0xAA;
        data9[5] = 0xAA;
        data9[6] = 0xAA;
        data9[7] = 0xAA;
        init_CAN_Frame(&m_msg9, 0x7A1, 8, 1, data9); 
        can_mid(m_msg9);
        readstep++;
        break;

        case 1:
        data9[0] = 0x30;
        data9[1] = 0x00;
        data9[2] = 0x00;
        data9[3] = 0xAA;
        data9[4] = 0xAA;
        data9[5] = 0xAA;
        data9[6] = 0xAA;
        data9[7] = 0xAA;
        init_CAN_Frame(&m_msg9, 0x7A1, 8, 1, data9); 
        can_mid(m_msg9);
        readstep++;
        break;

        default:
        readstep = 0;
        break;
    }
}
uint8_t UIDNumber[19] = {84,89,87,0,0,0,0,0,0,0,0,0,0,1,2,0,2,5,0xFF};
uint8_t UIDNumber2[15] = {0,5,2,2,0,0,0,0,0,0,0,0,0,0,0xFF};
uint8_t change = 13;
uint8_t writeflag = 0;
uint8_t UIDStep;
uint8_t seedresult[4] = {0};
void get_seed_msg(void);
uint8_t getseedresult = 0;
uint8_t waittime = 0;
void UIDWrite(void)
{
    CAN_Frame_st_t m_msg8;
    uint8_t data8[8] = {0, 0, 0, 0, 0, 0, 0, 0};

    if(UIDStep == 2)
    {
        waittime++;
        if(waittime > 3)
        {
            waittime = 0;
            UIDStep = 0;
        }
    }

    switch (UIDStep)
    {
        case 0:
            data8[0] = 0x02;
            data8[1] = 0x10;
            data8[2] = 0x03;
            data8[3] = 0xAA;
            data8[4] = 0xAA;
            data8[5] = 0xAA;
            data8[6] = 0xAA;
            data8[7] = 0xAA;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 1:
            data8[0] = 0x02;
            data8[1] = 0x27;
            data8[2] = 0x01;
            data8[3] = 0xAA;
            data8[4] = 0xAA;
            data8[5] = 0xAA;
            data8[6] = 0xAA;
            data8[7] = 0xAA;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 2:
            get_seed_msg();
            if(getseedresult == 1)
            {
                UIDStep++;
                getseedresult = 0;
            }
            break;
        case 3:
            waittime = 0;
            data8[0] = 0x06;
            data8[1] = 0x27;
            data8[2] = 0x02;
            data8[3] = seedresult[0];
            data8[4] = seedresult[1];
            data8[5] = seedresult[2];
            data8[6] = seedresult[3];
            data8[7] = 0xAA;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 4:
            data8[0] = 0x10;
            data8[1] = 0x23;
            data8[2] = 0x2E;
            data8[3] = 0x50;
            data8[4] = 0x01;
            data8[5] = 0x54;
            data8[6] = 0x59;
            data8[7] = 0x57;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 5:
            u8getUIDmsg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
            u8getUIDmsg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
            u8getUIDmsg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
            u8getUIDmsg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
            u8getUIDmsg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
            u8getUIDmsg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
            u8getUIDmsg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
            u8getUIDmsg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();
            if((u8getUIDmsg[0] == 0x30) && (u8getUIDmsg[2] == 0x14))
            {
                data8[0] = 0x21;
                data8[1] = 0x30;
                data8[2] = 0x30;
                data8[3] = 0x30;
                data8[4] = 0x30;
                data8[5] = 0x30;
                data8[6] = 0x30;
                data8[7] = 0x30;
                init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
                can_mid(m_msg8);
            }
            else
            {
                UIDStep = 0;
                writeflag = 0;
            }
            UIDStep++;
            break;
        case 6:
            data8[0] = 0x22;
            data8[1] = 0x30;
            data8[2] = 0x30;
            data8[3] = 0x30;
            data8[4] = 0x31;
            data8[5] = 0x32;
            data8[6] = 0x30;
            data8[7] = 0x32;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 7:
            data8[0] = 0x23;
            data8[1] = 0x35;
            data8[2] = 0x30 + UIDNumber2[0];
            data8[3] = 0x30 + UIDNumber2[1];
            data8[4] = 0x30 + UIDNumber2[2];
            data8[5] = 0x30 + UIDNumber2[3];
            data8[6] = 0x30 + UIDNumber2[4];
            data8[7] = 0x30 + UIDNumber2[5];
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 8:
            data8[0] = 0x24;
            data8[1] = 0x30 + UIDNumber2[6];
            data8[2] = 0x30 + UIDNumber2[7];
            data8[3] = 0x30 + UIDNumber2[8];
            data8[4] = 0x30 + UIDNumber2[9];
            data8[5] = 0x30 + UIDNumber2[10];
            data8[6] = 0x30 + UIDNumber2[11];
            data8[7] = 0x30 + UIDNumber2[12];
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UIDStep++;
            break;
        case 9:
            data8[0] = 0x25;
            data8[1] = 0x30 + UIDNumber2[13];
            data8[2] = 0xAA;
            data8[3] = 0xAA;
            data8[4] = 0xAA;
            data8[5] = 0xAA;
            data8[6] = 0xAA;
            data8[7] = 0xAA;
            init_CAN_Frame(&m_msg8, 0x7A1, 8, 1, data8); 
            can_mid(m_msg8);
            UID_ADD();
            UIDStep++;
            break;
        default:
            writeflag = 0;
            UIDStep = 0;
            writebeing = 1;
            UIDresult = 0;
            break;
    }
}
void Get_ID_0x794_Msg(void)
{

}

void Get_SW_msg(void)
{
    u8getSWmsg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8getSWmsg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8getSWmsg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8getSWmsg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8getSWmsg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8getSWmsg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8getSWmsg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8getSWmsg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();

    if(u8getSWmsg[0] == 0x21)
    {
        ruanjianbanbenhao[0] = u8getSWmsg[1] / 10;
        ruanjianbanbenhao[1] = u8getSWmsg[1] % 10;
        ruanjianbanbenhao[2] = u8getSWmsg[2];
        ruanjianbanbenhao[3] =  u8getSWmsg[3] / 10;
        ruanjianbanbenhao[4] =  u8getSWmsg[3] % 10;
        ruanjianbanbenhao[5] = 0xFF;
        SWtestresult = 0;
        General_Number_Disp(ruanjianbanbenhao, 135, 50);  
    }
}

void Get_SWIN_msg(void)
{
    u8getSWmsg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8getSWmsg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8getSWmsg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8getSWmsg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8getSWmsg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8getSWmsg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8getSWmsg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8getSWmsg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();

    if((u8getSWmsg[0] == 0x10) && (zhenduanstep == 9))
    {
        ruanjianbanbenhaoin[0] = u8getSWmsg[7];

    }
    else if(u8getSWmsg[0] == 0x21)
    {
        ruanjianbanbenhaoin[1] = u8getSWmsg[1];
        ruanjianbanbenhaoin[2] = u8getSWmsg[2];
        ruanjianbanbenhaoin[3] = u8getSWmsg[3];
        ruanjianbanbenhaoin[4] = 0xFF;
        General_Number_Disp(ruanjianbanbenhaoin, 135, 75);  
        SWINtestresult = 0;
    }
}

void Get_HW_msg(void)
{
    u8get714msg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8get714msg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8get714msg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8get714msg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8get714msg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8get714msg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8get714msg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8get714msg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();
    if(u8get714msg[0] == 0x21)
    {
        memcpy(yingjianbanbenhao,&u8get714msg[1],7);
        yingjianbanbenhao[7] = 0xFF;
        HWtestresult = 0;
        General_Number_Disp(yingjianbanbenhao, 100, 100);  
    }
    
}
uint8_t PNresult = 0;
void Get_PN_msg(void)
{
    u8get714msg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8get714msg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8get714msg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8get714msg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8get714msg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8get714msg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8get714msg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8get714msg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();
    if(u8get714msg[0] == 0x10 && u8get714msg[4] == 0x8A && PNresult == 0)
    {
        memset(lingjianhao,0xFF,sizeof(lingjianhao));
        // memcpy(&lingjianhao[0],&u8get714msg[5],3);
        lingjianhao[0] = u8get714msg[5];
        lingjianhao[1] = u8get714msg[6];
        lingjianhao[2] = u8get714msg[7];
        PNresult = 1;
    }
    else if(u8get714msg[0] == 0x21 && PNresult == 1)
    {
    //    memcpy(&lingjianhao[3],&u8get714msg[1],7);
       lingjianhao[3] = u8get714msg[1];
       lingjianhao[4] = u8get714msg[2];
       lingjianhao[5] = u8get714msg[3];
       lingjianhao[6] = u8get714msg[4];
       lingjianhao[7] = u8get714msg[5];
       lingjianhao[8] = u8get714msg[6];
       lingjianhao[9] = u8get714msg[7];
       PNresult = 2;
    }
    else if(u8get714msg[0] == 0x22 && PNresult == 2)
    {
        // memcpy(&lingjianhao[10],&u8get714msg[1],7);
        lingjianhao[10] = u8get714msg[1];
        lingjianhao[11] = u8get714msg[2];
        lingjianhao[12] = u8get714msg[3];
        lingjianhao[13] = u8get714msg[4];
        lingjianhao[14] = u8get714msg[5];
        lingjianhao[15] = u8get714msg[6];
        lingjianhao[16] = u8get714msg[7];
        // lingjianhao[16] = u8get714msg[7];
        PNtestresult = 1;
    }
}
uint8_t canlost;
uint8_t resettime = 0;
void uidreset(void)
{
    if(resettime > 50)
    {
        UIDresult = 0;
        resettime = 0;
        Display_TFT_Clear_UID2();
        canlost = 1;
    }
}
uint8_t writebeing = 1;
uint8_t UIDresult = 0;
uint8_t UIDcode1last[33];
void Get_UID_msg(void)
{
    u8get714msg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8get714msg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8get714msg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8get714msg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8get714msg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8get714msg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8get714msg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8get714msg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();
    if((u8get714msg[0] == 0x10) && (u8get714msg[4] == 0x01) && (UIDresult == 0))
    {
        // memset(UIDcode1,0xFF,sizeof(UIDcode1));
        // memcpy(UIDcode1,&u8get714msg[1],32);
        UIDcode1[0] = u8get714msg[5];
        UIDcode1[1] = u8get714msg[6];
        UIDcode1[2] = u8get714msg[7];
        UIDresult = 1;
    }
    if((u8get714msg[0] == 0x21) && (UIDresult == 1))
    {
       UIDcode1[3] = u8get714msg[1];
       UIDcode1[4] = u8get714msg[2];
       UIDcode1[5] = u8get714msg[3];
       UIDcode1[6] = u8get714msg[4];
       UIDcode1[7] = u8get714msg[5];
       UIDcode1[8] = u8get714msg[6];
       UIDcode1[9] = u8get714msg[7];
       UIDresult = 2;
    }
    else if((u8get714msg[0] == 0x22) && (UIDresult == 2))
    {
        UIDcode1[10] = u8get714msg[1];
        UIDcode1[11] = u8get714msg[2];
        UIDcode1[12] = u8get714msg[3];
        UIDcode1[13] = u8get714msg[4];
        UIDcode1[14] = u8get714msg[5];
        UIDcode1[15] = u8get714msg[6];
        UIDcode1[16] = u8get714msg[7];
        UIDresult = 3;
    }
    else if((u8get714msg[0] == 0x23) && (UIDresult == 3))
    {
        UIDcode1[17] = u8get714msg[1];
        UIDcode1[18] = u8get714msg[2];
        UIDcode1[19] = u8get714msg[3];
        UIDcode1[20] = u8get714msg[4];
        UIDcode1[21] = u8get714msg[5];
        UIDcode1[22] = u8get714msg[6];
        UIDcode1[23] = u8get714msg[7];
        UIDresult = 4;
    }
    else if((u8get714msg[0] == 0x24) && (UIDresult == 4))
    {
        UIDcode1[24] = u8get714msg[1];
        UIDcode1[25] = u8get714msg[2];
        UIDcode1[26] = u8get714msg[3];
        UIDcode1[27] = u8get714msg[4];
        UIDcode1[28] = u8get714msg[5];
        UIDcode1[29] = u8get714msg[6];
        UIDcode1[30] = u8get714msg[7];
        UIDresult = 5;
    }
    else if((u8get714msg[0] == 0x25) && (UIDresult == 5))
    {
        UIDcode1[31] = u8get714msg[1];
        UIDcode1[32] = 0xFF;
        UIDresult = 0;
        resettime = 0;

        if(canlost == 0)
        {
            for(int i = 0;i<33;i++)
            {
                if(UIDcode1last[i] != UIDcode1[i])
                {
                    General_Number_Disp(UIDcode1, 95, 225);
                    shouuid();
                }
            }
        }
        else
        {
            General_Number_Disp(UIDcode1, 95, 225);
            shouuid();
            canlost = 0;
        }

        for(int i = 0;i<33;i++)
        {
           UIDcode1last[i] = UIDcode1[i];
        }
    }
}


uint32_t ValidSeedKey;
uint32_t GenerateKey(uint8_t *Seed)
{
    // const uint8_t Xor[4] = {0xAC, 0x89, 0x18, 0xF2};
    // uint8_t key_array[4], Cal[4];
    // uint32_t key_value;

    // for (size_t i = 0; i < 4; i++)
    // {
    //     Cal[i] = Seed[i] ^ Xor[i];
    // }

    // key_array[0] = ((Cal[2] & 0xF0) << 4) | (Cal[3] & 0xF0);
    // key_array[1] = ((Cal[3] & 0x2F) << 2) | (Cal[1] & 0x03);
    // key_array[2] = ((Cal[1] & 0xFC) >> 2) | (Cal[0] & 0xC0);
    // key_array[3] = ((Cal[0] & 0x0F) << 4) | (Cal[2] & 0x0F);

    // key_value = ((uint32_t)key_array[0] << 24U);
    // key_value = key_value | ((uint32_t)key_array[1] << 16U);
    // key_value = key_value | ((uint32_t)key_array[2] << 8U);
    // key_value = key_value | (uint32_t)key_array[3];

    // return (key_value);


    unsigned char i = 0u;
	unsigned char T1[4u] = { 0u };
	unsigned char T2[4u] = { 0u };
	unsigned char Xor[4u] = { 0u };
    unsigned char arr[4u] = { 0u };
	unsigned char KeyConst[4u] = { 0u };
	unsigned char KeyConst_L1[4u] = { 0xACu, 0x89u, 0x18u, 0xF2u };
    unsigned char iSeedArray[4u] = { 0u };
    for (i = 0u; i < 4u; i++)
	{
        iSeedArray[i] = Seed[i];
    }

	Xor[0u] = iSeedArray[2u];
	Xor[1u] = iSeedArray[3u];
	Xor[2u] = iSeedArray[0u];
	Xor[3u] = iSeedArray[1u];

	for (i = 0u; i < 4u; i++)
	{
		KeyConst[i] = KeyConst_L1[i];
	}

	for (i = 0u; i < 4u; i++)
	{
		T1[i] = iSeedArray[i] ^ KeyConst[i];
		T2[i] = Xor[i] ^ KeyConst[i];
		arr[i] = (T1[i] + T2[i]) & 0xFFu;
	}
    ValidSeedKey = ((uint32_t)arr[0u] <<24u) + ((uint32_t)arr[1u] << 16u) + ((uint32_t)arr[2u] << 8u) + ((uint32_t)arr[3u] );
    return ValidSeedKey;
}

// void CalculateKey(void)
// {
//     unsigned char i = 0u;
//     unsigned char T1[4u] = { 0u };
//     unsigned char T2[4u] = { 0u };
//     unsigned char Xor[4u] = { 0u };
//     unsigned char arr[4u] = { 0u };
//     unsigned char KeyConst[4u] = { 0u };
//     unsigned char KeyConst_L1[4u] = { 0xACu, 0x89u, 0x18u, 0xF2u };
//     unsigned char iSeedArray[4u] = { 0u };
//     for (i = 0u; i < 4u; i++)
//     {
//         iSeedArray[i] = Seed[i];
//     }

//     Xor[0u] = iSeedArray[2u];
//     Xor[1u] = iSeedArray[3u];
//     Xor[2u] = iSeedArray[0u];
//     Xor[3u] = iSeedArray[1u];

//     for (i = 0u; i < 4u; i++)
//     {
//         KeyConst[i] = KeyConst_L1[i];
//     }

//     for (i = 0u; i < 4u; i++)
//     {
//         T1[i] = iSeedArray[i] ^ KeyConst[i];
//         T2[i] = Xor[i] ^ KeyConst[i];
//         arr[i] = (T1[i] + T2[i]) & 0xFFu;
//     }
//     ValidSeedKey = ((uint32_t)arr[0u] <<24u) + ((uint32_t)arr[1u] << 16u) + ((uint32_t)arr[2u] << 8u) + ((uint32_t)arr[3u] );
//    
// }
uint8_t chaengUDSstep = 0;
uint8_t seednum[4] = {0};
uint32_t UDS_time = 0;
extern uint32_t fakedelay;
extern uint32_t fakedelay;
uint32_t resetpowtime = 0;
uint32_t FUresetpowtime = 0;
uint8_t fuelreset1 = 0;
uint8_t fuelreset2 = 0;
uint8_t fuelreset3 = 0;
uint8_t fuelreset4 = 0;
void resetpowerfuel(void)
{
    // if(FUresetpowtime < 100)
    // {
    //     FUresetpowtime++;
    //     POWER_CTRL_KL30   = 0u;  //B+
    //     POWER_CTRL_KL15   = 0u;  //KL15
    // }
    // else
    // {
    //     POWER_CTRL_KL30   = 1u;  //B+
    //     POWER_CTRL_KL15   = 1u;  //KL15
    //     FUresetpowtime = 0;
    //     if(fuelreset1 == 1)
    //     {
    //         fuelreset1 = 2;
    //     }
    //     else if(fuelreset2 == 1)
    //     {
    //         fuelreset2 = 2;
    //     }
    //     else if(fuelreset3 == 1)
    //     {
    //         fuelreset3 = 2;
    //     }
    //     else if(fuelreset4 == 1)
    //     {
    //         fuelreset4 = 2;
    //     }
    //     else
    //     {
    //         ;
    //     }

    // }
}
void resetpower(void)
{

    // if(resetpowtime < 100)
    // {
    //     resetpowtime++;
    //     POWER_CTRL_KL30   = 0u;  //B+
    //     POWER_CTRL_KL15   = 0u;  //KL15
    // }
    // else
    // {
    //     POWER_CTRL_KL30   = 1u;  //B+
    //     POWER_CTRL_KL15   = 1u;  //KL15
        
    //     chaengUDSstep = 0;
    //     resettime = 1;
    // }
    // resetflag = 1;
}
void resetchangeUDSfuc(void)
{
    // if((MENU_CHECK_STEP == 0 || MENU_CHECK_STEP == 10) && resettime == 0)
    // {
        
        
    //     fakedelay = 0;
    //     UDS_time = 0;
    //     getseedresult = 0;
    //     fakedelay = 0;
    //     if(MENU_CHECK_STEP == 10)
    //     {
    //         resetpower();
    //     }
    //     else
    //     {
    //         resettime = 1;
    //         chaengUDSstep = 0;
    //     }
        
    // }
    // if(MENU_CHECK_STEP != 0 && MENU_CHECK_STEP != 10)
    // {
    //     resettime = 0;
    // }
}
uint8_t vspeedpeizhi = 0;
uint8_t trackmode = 0;
void change_UDS_DID(void)
{
    // if(MENU_CHECK_STEP != 0)
    // {
    //     vspeedpeizhi = 0x4;
    //     trackmode = 1;
    // }
    // else
    // {
    //     vspeedpeizhi = 0x3;
    //     trackmode = 0;
    // }
    // CAN_Frame_st_t m_msg;
    // uint8_t data[8] = {0, 0, 0, 0, 0, 0, 0, 0};
    // switch (chaengUDSstep)
    // {
    //     case 0:
    //     resetflag = 1;
    //         data[0] = 0x02;
    //         data[1] = 0x10;
    //         data[2] = 0x03;
    //         data[3] = 0xAA;
    //         data[4] = 0xAA;
    //         data[5] = 0xAA;
    //         data[6] = 0xAA;
    //         data[7] = 0xAA;
    //         init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
    //         can_mid(m_msg);
    //         POWER_CTRL_KL30   = 1u;  //B+
    //         POWER_CTRL_KL15   = 1u;  //KL15
    //         chaengUDSstep++;
    //         break;
    //     case 1:
    //         data[0] = 0x02;
    //         data[1] = 0x27;
    //         data[2] = 0x01;
    //         data[3] = 0xAA;
    //         data[4] = 0xAA;
    //         data[5] = 0xAA;
    //         data[6] = 0xAA;
    //         data[7] = 0xAA;
    //         init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     case 2:
    //         get_seed_msg();
    //         if(getseedresult == 1)
    //         {
    //             chaengUDSstep++;
    //         }
            
    //         break;
    //     case 3:
    //         data[0] = 0x06;
    //         data[1] = 0x27;
    //         data[2] = 0x02;
    //         data[3] = seedresult[0];
    //         data[4] = seedresult[1];
    //         data[5] = seedresult[2];
    //         data[6] = seedresult[3];
    //         data[7] = 0xAA;
    //         init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     case 4:
    //         data[0] = 0x10;
    //         data[1] = 0x13;
    //         data[2] = 0x2E;
    //         data[3] = 0xF0;
    //         data[4] = 0x10;
    //         data[5] = 0x03;
    //         data[6] = 0xBF;
    //         data[7] = 0xFD;
    //         init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     case 5:
    //         data[0] = 0x21;
    //         data[1] = 0xE7;
    //         data[2] = vspeedpeizhi;//车速配置四:0x03 车速配置五：0x04
    //         data[3] = 0x03;
    //         data[4] = 0x98;
    //         data[5] = 0x20;
    //         data[6] = 0x00;
    //         data[7] = 0x00;
    //         init_CAN_Frame(&m_msg, 0x7A9, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     case 6:
    //         data[0] = 0x22;
    //         data[1] = 0x00;
    //         data[2] = 0x00;
    //         data[3] = 0x00;
    //         data[4] = 0x00;
    //         data[5] = 0x00;
    //         data[6] = 0x00;
    //         data[7] = 0xAA;
    //         init_CAN_Frame(&m_msg, 0x7A9, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     case 7:
    //     {//履带模式开关
    //         data[0] = 0x04;
    //         data[1] = 0x2E;
    //         data[2] = 0x03;
    //         data[3] = 0x0A;
    //         data[4] = trackmode;//1:开 0：关
    //         data[5] = 0xAA;
    //         data[6] = 0xAA;
    //         data[7] = 0xAA;
    //         init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
    //         can_mid(m_msg);
    //         chaengUDSstep++;
    //         break;
    //     }   

    //     case 8:
    //             // POWER_CTRL_KL30   = 0u;  //B+
    //             // POWER_CTRL_KL15   = 0u;  //KL15
    //             if(UDS_time < 100)
    //             {
    //                 UDS_time++;
    //             }
    //             else
    //             {
    //                 chaengUDSstep++;
    //             }
    //             break;
    //     case 9:
    //             POWER_CTRL_KL30   = 1u;  //B+
    //             POWER_CTRL_KL15   = 1u;  //KL15
    //             if(UDS_time < 50)
    //             {
    //                 UDS_time++;
    //             }
    //             else
    //             {
    //                 chaengUDSstep++;
    //             }
    //             break;
    //     default:
    //     cycleflag = 1;
    //     resetflag = 0;
    //     break;
    // }
}
uint32_t testseed;
void get_seed_msg(void)
{
    if(getseedresult == 1)
    {
        return ;
    }
    u8get714msg[0] = Get_CAN_CH0_ID_7A9_byte0_Sig();
    u8get714msg[1] = Get_CAN_CH0_ID_7A9_byte1_Sig();
    u8get714msg[2] = Get_CAN_CH0_ID_7A9_byte2_Sig();
    u8get714msg[3] = Get_CAN_CH0_ID_7A9_byte3_Sig();
    u8get714msg[4] = Get_CAN_CH0_ID_7A9_byte4_Sig();
    u8get714msg[5] = Get_CAN_CH0_ID_7A9_byte5_Sig();
    u8get714msg[6] = Get_CAN_CH0_ID_7A9_byte6_Sig();
    u8get714msg[7] = Get_CAN_CH0_ID_7A9_byte7_Sig();
    if(u8get714msg[1] == 0x67 && u8get714msg[2] == 0x01)
    {
        memcpy(seednum,&u8get714msg[3],4);
        testseed = GenerateKey(seednum);
        seedresult[0] = (uint8_t)(testseed >> 24);
        seedresult[1] = (uint8_t)(testseed >> 16);
        seedresult[2] = (uint8_t)(testseed >> 8);
        seedresult[3] = (uint8_t)testseed ;
        getseedresult = 1;
        
    }
    // getseedresult = 1;
}
uint8_t opentrackstep = 0;
void Opentracksta(void)
{
    CAN_Frame_st_t m_msg;
    uint8_t data[8] = {0, 0, 0, 0, 0, 0, 0, 0};
    switch (opentrackstep)
    {
        case 0:
            data[0] = 0x02;
            data[1] = 0x10;
            data[2] = 0x03;
            data[3] = 0xAA;
            data[4] = 0xAA;
            data[5] = 0xAA;
            data[6] = 0xAA;
            data[7] = 0xAA;
            init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
            can_mid(m_msg);
            chaengUDSstep++;
            break;
        case 1:
            data[0] = 0x02;
            data[1] = 0x27;
            data[2] = 0x01;
            data[3] = 0xAA;
            data[4] = 0xAA;
            data[5] = 0xAA;
            data[6] = 0xAA;
            data[7] = 0xAA;
            init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
            can_mid(m_msg);
            chaengUDSstep++;
            break;
        case 2:
            get_seed_msg();
            if(getseedresult == 1)
            {
                chaengUDSstep++;
            }
            
            break;
        case 3:
            data[0] = 0x06;
            data[1] = 0x27;
            data[2] = 0x02;
            data[3] = seedresult[0];
            data[4] = seedresult[1];
            data[5] = seedresult[2];
            data[6] = seedresult[3];
            data[7] = 0xAA;
            init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
            can_mid(m_msg);
            chaengUDSstep++;
            break;
        case 4:
        {
            data[0] = 0x04;
            data[1] = 0x2E;
            data[2] = 0x03;
            data[3] = 0x0A;
            data[4] = 0x01;
            data[5] = 0xAA;
            data[6] = 0xAA;
            data[7] = 0xAA;
            init_CAN_Frame(&m_msg, 0x7A1, 8, 1, data); 
            can_mid(m_msg);
            chaengUDSstep++;
            break;
        }   

        default:
        break;
    }
}