Skip to content

J
jiancetai
Commit 03d50672 authored by 王佳伟's avatar 王佳伟
Browse files
Options

✨ feat:测试

parent 1c9382a7
Show whitespace changes
Inline Side-by-side
Showing with 133 additions and 351 deletions
YueJin_test_bench/source/Appliciation/Barcode_Scanner.c
View file @ 03d50672
...@@ -61,278 +61,12 @@ void get_key(void) ...@@ -61,278 +61,12 @@ void get_key(void)
key_value = key_value | ((uint32_t)key_array[2] << 8U); key_value = key_value | ((uint32_t)key_array[2] << 8U);
key_value = key_value | (uint32_t)key_array[3]; key_value = key_value | (uint32_t)key_array[3];
} }
uint8_t recvflag111 = 0;
void datacheck(void) void datacheck(void)
{ {
uint8_t dataopenBuff [ 11 ] ={0x07,0x36,0xAD,0x0F,0x0F,0x11,0x01,0x02,0x03,0x04,0xE6};
uint8_t datacloseBuff [ 11 ] ={0x07,0x36,0x33,0x0F,0x0F,0x11,0x01,0x02,0x03,0x04,0x6C};
RS485_send_time = 0;
RS485_TX_finish = 0;
uint16_t checksum = 0;
uint8_t arraynum = 0;
if(zhenduanflag == 0)
{
if(BarCode[0] == 0x59 && BarCode[1] == 0x44)
{
for(int i = 0;i<255;i++)
{
if(BarCode[i] == 0x4A && BarCode[i - 1] == 0x4B)
{
arraynum = i;
}
}
if(((BarCode[arraynum]) == 0x4A) && ((BarCode[arraynum-1]) == 0x4B))
{
for(int i = 0;i < 64;i++)
{
RS485_data[i] = BarCode[4+i];
}
switch (BarCode[2])
{
case 0x48:
memcpy(R485_ID48h.Msg,RS485_data,64);
checksum = Yadi_CAL_Data_Sum(&BarCode[2], 64 + 2);
if(checksum != BarCode[68])
{
checknumwrong = 1;
}
break;
case 0x49:
memcpy(R485_ID49h.Msg,RS485_data,64);
checksum = Yadi_CAL_Data_Sum(&BarCode[2], 64 + 2);
if(checksum != BarCode[68])
{
checknumwrong = 1;
}
break;
case 0x4A:
if(connectbleFlag == 1)
{
memcpy(R485_ID4Ah.Msg,RS485_data,64);
}
memcpy(R485_ID4Ah.Msg,RS485_data,64);
checksum = Yadi_CAL_Data_Sum(&BarCode[2], 64 + 2);
if(checksum != BarCode[68])
{
checknumwrong = 1;
}
break;
case 0x4D:
memcpy(R485_ID4Dh.Msg,RS485_data,64);
break;
case 0x81:
{
blename[0] = RS485_data[6];
blename[1] = RS485_data[7];
blename[2] = RS485_data[8];
blename[3] = RS485_data[9];
blename[4] = 0xff;
lightnumber = (RS485_data[11]<<8)+RS485_data[10];
recvflag111 = 1;
RS485_TX_finish = 0;
// General_Number_Disp(blename, 3, 165);
}
break;
case 0x4F:
{
switch (BarCode[6])
{
case 0:
LineGetSta.power1 = (BarCode[7]<<8 |BarCode[8]);
if(LineGetSta.power1 < 24)
{
powerstdio = 1;
}
break;
case 1:
LineGetSta.ble1 = BarCode[7];
if(LineGetSta.ble1 == 1)
{
line_stdio = 1;
}
break;
case 2:
LineGetSta.turnleft1 = BarCode[7];
if(LineGetSta.turnleft1 == 1)
{
line_stdio = 1;
}
break;
case 3:
LineGetSta.turnright1 = BarCode[7];
if(LineGetSta.turnright1 == 1)
{
line_stdio = 1;
}
break;
case 4:
LineGetSta.ABSlight1 = BarCode[7];
if(LineGetSta.ABSlight1 == 1)
{
line_stdio = 1;
}
break;
case 5:
LineGetSta.lowlight1 = BarCode[7];
if(LineGetSta.lowlight1 == 1)
{
line_stdio = 1;
}
break;
case 6:
LineGetSta.highlight1 = BarCode[7];
if(LineGetSta.highlight1 == 1)
{
line_stdio = 1;
}
break;
case 7:
LineGetSta.weizhilight1 = BarCode[7];
if(LineGetSta.weizhilight1 == 1)
{
line_stdio = 1;
}
break;
default:
break;
}
}
default:
break;
}
memset(RS485_data,0,64);
RS485_TX_finish = 0;
}
else
{
// RS485_send_num--;
RS485_TX_finish = 0;
}
}
else
{
RS485_TX_finish = 0;
}
}
else if(zhenduanflag == 1)
{
if(BarCode[0] == 0x59 && BarCode[1] == 0x44)
{
for(int i = 0;i<255;i++)
{
if(BarCode[i] == 0x4A && BarCode[i - 1] == 0x4B)
{
arraynum = i;
}
}
// g_Stage = 1;
if(((BarCode[arraynum]) == 0x4A) && ((BarCode[arraynum-1]) == 0x4B))
{
switch (zhenduansendStep)
{
case 0:
if(BarCode[2] == 0x4F)
{
if(BarCode[4] == 0x50 && BarCode[5] == 0x3)
{
zhenduansendStep++;
RS485_TX_finish = 0;
}
}
break;
case 1:
if(BarCode[2] == 0x4F)
{
if(BarCode[4] == 0x67 && BarCode[5] == 0x1)
{
seed_value[0] = BarCode[6];
seed_value[1] = BarCode[7];
seed_value[2] = BarCode[8];
seed_value[3] = BarCode[9];
get_key();
zhenduansendStep++;
RS485_TX_finish = 0;
}
}
break;
case 2:
if(BarCode[2] == 0x4F)
{
if(BarCode[4] == 0x67 && BarCode[5] == 0x2)
{
zhenduansendStep++;
RS485_TX_finish = 0;
}
else if(BarCode[4] != 0x67)
{
zhenduansendStep = 0;
RS485_TX_finish = 0;
}
else
{
;
}
}
break;
case 3:
if(BarCode[2] == 0x4F)
{
if((BarCode[4] == 0x6E) && (BarCode[5] == 0x50) && (BarCode[6] == 0))
{
zhenduansendStep++;
RS485_TX_finish = 0;
}
if(BarCode[4] == 0x7F && BarCode[5] == 0x2E && BarCode[6] == 0x78 )
{
RS485_TX_finish = 1;
// zhenduansendStep = 0;
// ;
}
if(BarCode[4] == 0x7F && BarCode[5] == 0x2E && BarCode[6] == 0x31 )
{
RS485_TX_finish = 0;
}
}
else
{
// RS485_TX_finish = 0;
}
break;
default:
break;
}
memset(RS485_data,0,64);
}
else
{
// RS485_TX_finish = 0x0;
}
}
}
else if(zhenduanflag == 2)
{
if(BarCode[0] == 0x59 && BarCode[1] == 0x44)
{
for(int i = 0;i<255;i++)
{
if(BarCode[i] == 0x4A && BarCode[i - 1] == 0x4B)
{
arraynum = i;
}
}
if(((BarCode[arraynum]) == 0x4A) && ((BarCode[arraynum-1]) == 0x4B))
{
if(BarCode[4] == 0x62 && BarCode[5] == 0x50 && BarCode[6] == 0)
{
memcpy(get_num_buf,BarCode+7,34 );
comparestart = 1;
zhenduanflag = 3;
}
}
}
}
} }
uint8_t cmpresult = 3; uint8_t cmpresult = 3;
void BarCodeDataGet(void) void BarCodeDataGet(void)
...@@ -459,7 +193,7 @@ void Recv_Byte(void) ...@@ -459,7 +193,7 @@ void Recv_Byte(void)
{ {
if(i > 5) if(i > 5)
{ {
if((mDataBufPtr[i] == 0x4A ) && (mDataBufPtr[i - 1] == 0x4B)) if((mDataBufPtr[i] == 0x4A ) && (mDataBufPtr[i + 1] == 0x4B))
{ {
if( i < 1) if( i < 1)
{ {
...@@ -477,16 +211,10 @@ void Recv_Byte(void) ...@@ -477,16 +211,10 @@ void Recv_Byte(void)
} }
// 解析协议 // 解析协议
len = i; len = i + 1;
if ( (len > 0) && (len < mDataBufLen) ) if ( (len > 0) && (len < mDataBufLen) )
{ {
// 将未解析的数据移到头部 memcpy(mDataBufPtr, mDataBufPtr + len, mDataBufLen - len);
// Move unparsed data to the head
memcpy(mDataBufLen, mDataBufLen + len, mDataBufLen - len);
// memcpy(nowdata,mDataBufPtr + len,len);
// datacheck();
} }
mDataBufLen -= len; mDataBufLen -= len;
datacheck(); datacheck();
......
YueJin_test_bench/source/Appliciation/Check_Ctrl.c
View file @ 03d50672
...@@ -279,7 +279,7 @@ uint8_t yibiaoshuju[34]; ...@@ -279,7 +279,7 @@ uint8_t yibiaoshuju[34];
{ {
MENU_CHECK_STEP = 0; MENU_CHECK_STEP = 0;
} }
Function_Check_Ctrl(1); //Excel表格发报文。硬线信号 //Function_Check_Ctrl(1); //Excel表格发报文。硬线信号
Diag_Info_Init( ); Diag_Info_Init( );
Display_Init( ); Display_Init( );
// Send_Init(); // Send_Init();
......
YueJin_test_bench/source/Appliciation/Key_user.c
View file @ 03d50672
...@@ -140,10 +140,10 @@ void Key_Operation_SW8(Key_Event_en_t enKeyEvent) ...@@ -140,10 +140,10 @@ void Key_Operation_SW8(Key_Event_en_t enKeyEvent)
else else
{ {
zhenduanflag = 0; zhenduanflag = 0;
LINE_OUT_NEG_01 = 1; // LINE_OUT_NEG_01 = 1;
LINE_OUT_NEG_02 = 1; // LINE_OUT_NEG_02 = 1;
LINE_OUT_NEG_03 = 1; // LINE_OUT_NEG_03 = 1;
LINE_OUT_NEG_04 = 1; // LINE_OUT_NEG_04 = 1;
zhenduansendStep = 0; zhenduansendStep = 0;
// memset(barcode_Msg,0,sizeof(barcode_Msg)); // memset(barcode_Msg,0,sizeof(barcode_Msg));
......
YueJin_test_bench/source/Appliciation/R485_Communication_Matrix.c
View file @ 03d50672
...@@ -849,10 +849,10 @@ uint32_t R485_Send_0x47(void) ...@@ -849,10 +849,10 @@ uint32_t R485_Send_0x47(void)
memcpy(R485_zhenduan_Msg+3,barcode_Msg,34); memcpy(R485_zhenduan_Msg+3,barcode_Msg,34);
break; break;
case 4: case 4:
LINE_OUT_NEG_01 = 0; // LINE_OUT_NEG_01 = 0;
LINE_OUT_NEG_02 = 0; // LINE_OUT_NEG_02 = 0;
LINE_OUT_NEG_03 = 0; // LINE_OUT_NEG_03 = 0;
LINE_OUT_NEG_04 = 0; // LINE_OUT_NEG_04 = 0;
break; break;
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.c
View file @ 03d50672
...@@ -119,15 +119,45 @@ void RTE_GPIO_Init(void) ...@@ -119,15 +119,45 @@ void RTE_GPIO_Init(void)
gpio_temp.enGPIODir = GPIO_DIR_OUT; gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1; gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp); GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_9;
gpio_temp.enGPIOPIN = GPIO_PIN_4;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_9;
gpio_temp.enGPIOPIN = GPIO_PIN_5;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_9;
gpio_temp.enGPIOPIN = GPIO_PIN_6;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_0;
gpio_temp.enGPIOPIN = GPIO_PIN_8;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_IN;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_0;
gpio_temp.enGPIOPIN = GPIO_PIN_7;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_IN;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
queren = 0; queren = 0;
LINE_OUT_POS_06 = 0; LINE_OUT_POS_06 = 0;
LINE_OUT_POS_07 = 0; LINE_OUT_POS_07 = 0;
LINE_OUT_NEG_01 = 1; // LINE_OUT_NEG_01 = 1;
LINE_OUT_NEG_02 = 1; // LINE_OUT_NEG_02 = 1;
LINE_OUT_NEG_03 = 1; // LINE_OUT_NEG_03 = 1;
LINE_OUT_NEG_04 = 1; // LINE_OUT_NEG_04 = 1;
#if(0) #if(0)
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_0; gpio_temp.enGPIOPort = GPIO_PORT_GROUP_0;
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.h
View file @ 03d50672
...@@ -45,8 +45,12 @@ ...@@ -45,8 +45,12 @@
#define LINE_OUT_PARK GPIO_OUT_PORT10_PIN06 #define LINE_OUT_PARK GPIO_OUT_PORT10_PIN06
#define LINE_OUT_EPS GPIO_OUT_PORT10_PIN06 #define LINE_OUT_EPS GPIO_OUT_PORT10_PIN06
#define Light_Out GPIO_IN_PORT10_PIN09 #define Light_Out GPIO_IN_PORT10_PIN09
#define POWER_CTRL_KL30 GPIO_OUT_PORT10_PIN13
#define POWER_CTRL_KL15 GPIO_OUT_PORT10_PIN12
#define POWER_CTRL_KL30 GPIO_OUT_PORT09_PIN05
#define POWER_CTRL_KL30_B GPIO_OUT_PORT09_PIN04
#define POWER_CTRL_KL15 GPIO_OUT_PORT09_PIN06
#define LINE_OUT_FANGDAO GPIO_OUT_PORT10_PIN06 #define LINE_OUT_FANGDAO GPIO_OUT_PORT10_PIN06
......
YueJin_test_bench/source/Appliciation/Task.c
View file @ 03d50672
...@@ -87,6 +87,7 @@ void Sys_Run_Mode_10ms_Tasks_Group(void) ...@@ -87,6 +87,7 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
{ {
// BusOff_Service( ); // BusOff_Service( );
Key_Service( ); Key_Service( );
Recv_Byte();
if(devicename<0xFFFF) if(devicename<0xFFFF)
{ {
devicename++; devicename++;
...@@ -158,10 +159,10 @@ void Sys_Run_Mode_10ms_Tasks_Group(void) ...@@ -158,10 +159,10 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
else else
{ {
// bleOFFtoONtime = 0; // bleOFFtoONtime = 0;
LINE_OUT_NEG_01 = 0; // LINE_OUT_NEG_01 = 0;
LINE_OUT_NEG_02 = 0; // LINE_OUT_NEG_02 = 0;
LINE_OUT_NEG_03 = 0; // LINE_OUT_NEG_03 = 0;
LINE_OUT_NEG_04 = 0; // LINE_OUT_NEG_04 = 0;
startONfalg = 1; startONfalg = 1;
Display_TFT_Clear(); Display_TFT_Clear();
} }
...@@ -170,10 +171,10 @@ void Sys_Run_Mode_10ms_Tasks_Group(void) ...@@ -170,10 +171,10 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
{ {
if(startIGONtime >= 50) if(startIGONtime >= 50)
{ {
LINE_OUT_NEG_01 = 1; // LINE_OUT_NEG_01 = 1;
LINE_OUT_NEG_02 = 1; // LINE_OUT_NEG_02 = 1;
LINE_OUT_NEG_03 = 1; // LINE_OUT_NEG_03 = 1;
LINE_OUT_NEG_04 = 1; // LINE_OUT_NEG_04 = 1;
if(startIGONtime >= 100) if(startIGONtime >= 100)
{ {
Openble[0] = 0x59; Openble[0] = 0x59;
...@@ -235,14 +236,11 @@ void Sys_Run_Mode_10ms_Tasks_Group(void) ...@@ -235,14 +236,11 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
else else
{ {
// backsend(); // backsend();
LINE_OUT_NEG_09 = 0; // LINE_OUT_NEG_09 = 0;
if(LINE_OUT_NEG_09 == 0) // if(LINE_OUT_NEG_09 == 0)
{ // {
Recv_Byte();
}
// }
} }
} }
...@@ -362,6 +360,8 @@ uint8_t compareresult; ...@@ -362,6 +360,8 @@ uint8_t compareresult;
uint8_t flashtime = 0; uint8_t flashtime = 0;
uint8_t showtime = 0; uint8_t showtime = 0;
uint8_t bleuarttime = 0; uint8_t bleuarttime = 0;
uint16_t time5s = 0;
uint16_t IGFLAG = 0;
void Sys_Run_Mode_100ms_Tasks_Group(void) void Sys_Run_Mode_100ms_Tasks_Group(void)
{ {
static uint32_t loc_timer = 0; static uint32_t loc_timer = 0;
...@@ -373,6 +373,33 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -373,6 +373,33 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
Recv_Byte1(); Recv_Byte1();
} }
Display_PageNum(); Display_PageNum();
//POWER_CTRL_KL30 = 1;
time5s+=100;
if(time5s > 10000)
{
time5s = 0;
if(IGFLAG == 1)
{
IGFLAG = 0;
}
else
{
IGFLAG = 1;
}
}
POWER_CTRL_KL30 = 1;
POWER_CTRL_KL30_B = 1;
if(IGFLAG == 1)
{
POWER_CTRL_KL15 = 1;
}
else
{
POWER_CTRL_KL15 = 0;
}
...@@ -417,18 +444,18 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -417,18 +444,18 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
else else
{ {
if(LINE_OUT_NEG_01 == 1) // if(LINE_OUT_NEG_01 == 1)
{ // {
LINE_OUT_NEG_01 = 0; // LINE_OUT_NEG_01 = 0;
LINE_OUT_NEG_04 = 0; // LINE_OUT_NEG_04 = 0;
ONOFFtime = 0; // ONOFFtime = 0;
} // }
else // else
{ // {
LINE_OUT_NEG_01 = 1; // LINE_OUT_NEG_01 = 1;
LINE_OUT_NEG_04 = 1; // LINE_OUT_NEG_04 = 1;
ONOFFtime = 0; // ONOFFtime = 0;
} // }
} }
} }
if(flashtime < 3) if(flashtime < 3)
...@@ -456,7 +483,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -456,7 +483,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
} }
else if(comparestart == 0) else if(comparestart == 0)
{ {
Total_Check( ); //Total_Check( );
if(zhenduanflag == 3) if(zhenduanflag == 3)
{ {
if(compareresult == 1) if(compareresult == 1)
...@@ -476,7 +503,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -476,7 +503,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
} }
else else
{ {
Total_Check(); //Total_Check();
} }
flashtime = 0; flashtime = 0;
} }
...@@ -492,7 +519,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -492,7 +519,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
if(firstpowerflag == 1) if(firstpowerflag == 1)
{ {
zhenduanflag = 2; zhenduanflag = 2;
Total_Check(); //Total_Check();
firstpowerflag = 2; firstpowerflag = 2;
Display_TFT_Clear(); Display_TFT_Clear();
if(compareresult == 1 && comparestart == 0) if(compareresult == 1 && comparestart == 0)
...@@ -509,7 +536,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -509,7 +536,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
TFT_LCD_Draw_Bmp(200, 90+40, ( uint8_t * )gImage_dui1 ); TFT_LCD_Draw_Bmp(200, 90+40, ( uint8_t * )gImage_dui1 );
// comparestart = 2; // comparestart = 2;
} }
Total_Check(); //Total_Check();
firstpowerflag = 3; firstpowerflag = 3;
// zhendlag = 5; // zhendlag = 5;
} }
...@@ -519,7 +546,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void) ...@@ -519,7 +546,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
{ {
if(compareresult == 1) if(compareresult == 1)
{ {
Total_Check(); //Total_Check();
firstpowerflag = 3; firstpowerflag = 3;
zhenduanflag = 2; zhenduanflag = 2;
if(compareresult == 1) if(compareresult == 1)
......
YueJin_test_bench/source/System/init.c
View file @ 03d50672
...@@ -64,7 +64,6 @@ void Sys_Startup_Pre_Init(void) ...@@ -64,7 +64,6 @@ void Sys_Startup_Pre_Init(void)
* \attention * \attention
* \retval None * \retval None
******************************************************************************/ ******************************************************************************/
uint8_t firstIGON = 0xFF;
void Sys_Startup_Init(void) void Sys_Startup_Init(void)
{ {
RTC_Pre_Init( ); //首次上电 RTC_Pre_Init( ); //首次上电
...@@ -86,37 +85,32 @@ void Sys_Startup_Init(void) ...@@ -86,37 +85,32 @@ void Sys_Startup_Init(void)
Fre_In_KL30_Wakeup_Init(); Fre_In_KL30_Wakeup_Init();
UART_Channel_Config_st_t loc_config; UART_Channel_Config_st_t loc_config;
loc_config.enUARTLINMode = MODE_UART; loc_config.enUARTLINMode = MODE_UART;
loc_config.u32UARTbps = 115200; loc_config.u32UARTbps = 9600;
loc_config.enUARTOrder = UART_LSB; loc_config.enUARTOrder = UART_LSB;
loc_config.en2UARTParity = UART_PARITY_DISABLE; loc_config.en2UARTParity = UART_PARITY_DISABLE;
loc_config.en2UARTPolarity = UART_POLARITY_NORMAL; loc_config.en2UARTPolarity = UART_POLARITY_NORMAL;
loc_config.pfnUARTConfirmCallBack = 0; loc_config.pfnUARTConfirmCallBack = 0;
loc_config.pfnUARTErrHandleCallBack = 0; loc_config.pfnUARTErrHandleCallBack = 0;
loc_config.pfnUARTReadMsgCallBack = UART_Put; loc_config.pfnUARTReadMsgCallBack = UART_Put;
firstIGON = 1;
UART_Init(UART_RLIN30, &loc_config); UART_Init(UART_RLIN30, &loc_config);
loc_config.enUARTLINMode = MODE_UART; // loc_config.enUARTLINMode = MODE_UART;
loc_config.u32UARTbps = 9600; // loc_config.u32UARTbps = 9600;
loc_config.enUARTOrder = UART_LSB; // loc_config.enUARTOrder = UART_LSB;
loc_config.en2UARTParity = UART_PARITY_DISABLE; // loc_config.en2UARTParity = UART_PARITY_DISABLE;
loc_config.en2UARTPolarity = UART_POLARITY_NORMAL; // loc_config.en2UARTPolarity = UART_POLARITY_NORMAL;
loc_config.pfnUARTConfirmCallBack = 0; // loc_config.pfnUARTConfirmCallBack = 0;
loc_config.pfnUARTErrHandleCallBack = 0; // loc_config.pfnUARTErrHandleCallBack = 0;
loc_config.pfnUARTReadMsgCallBack = UART_Put1; // loc_config.pfnUARTReadMsgCallBack = UART_Put1;
UART_Init(UART_RLIN31, &loc_config); // UART_Init(UART_RLIN31, &loc_config);
loc_config.enUARTLINMode = MODE_UART; // loc_config.enUARTLINMode = MODE_UART;
loc_config.u32UARTbps = 115200; // loc_config.u32UARTbps = 115200;
loc_config.enUARTOrder = UART_LSB; // loc_config.enUARTOrder = UART_LSB;
loc_config.en2UARTParity = UART_PARITY_DISABLE; // loc_config.en2UARTParity = UART_PARITY_DISABLE;
loc_config.en2UARTPolarity = UART_POLARITY_NORMAL; // loc_config.en2UARTPolarity = UART_POLARITY_NORMAL;
loc_config.pfnUARTConfirmCallBack = 0; // loc_config.pfnUARTConfirmCallBack = 0;
loc_config.pfnUARTErrHandleCallBack = 0; // loc_config.pfnUARTErrHandleCallBack = 0;
loc_config.pfnUARTReadMsgCallBack = UART_Put2; // loc_config.pfnUARTReadMsgCallBack = UART_Put2;
UART_Init(UART_RLIN32, &loc_config); // UART_Init(UART_RLIN32, &loc_config);
LINE_OUT_NEG_01 = 1;
LINE_OUT_NEG_02 = 1;
LINE_OUT_NEG_03 = 1;
LINE_OUT_NEG_04 = 1;
Display_TFT_Clear(); Display_TFT_Clear();
GUI_Display_Version_Code_Service(25, 20, "Please Scan The Code ", Letter_Num_11, PCodeText_Space_size); GUI_Display_Version_Code_Service(25, 20, "Please Scan The Code ", Letter_Num_11, PCodeText_Space_size);
......
YueJin_test_bench/source/System/main.c
View file @ 03d50672
...@@ -17,7 +17,6 @@ int main(void) ...@@ -17,7 +17,6 @@ int main(void)
{ {
Sys_Scheduling_Service(); Sys_Scheduling_Service();
WDT_Clear(); WDT_Clear();
} }
} }
static void Sys_Task_Init(void) static void Sys_Task_Init(void)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment