✨ feat:春风检测台首版无贴图

YueJin_test_bench/source/Appliciation/CAN_APP.h

@@ -45,5 +45,11 @@ void Can_Set_Buff_75F(uint8_t CopyData []);
 
 void    Can_BusOffRecover(void);
 uint8_t CrcCheckSum(uint8_t *data, uint8_t len);
-
+void can_submit(void);
+void Get_ID_0x794_Msg(void);
+void send_0x714_fuc(void);
+extern uint8_t ruanjianbanbenhao[8];
+void Get_PN_msg(void);
+void change_UDS_DID(void);
+void resetchangeUDSfuc(void);
 #endif

YueJin_test_bench/source/Appliciation/CAN_Communication_Matrix.c

@@ -79,7 +79,16 @@ const st_CANMsgAttribute CAN_MSG_CONST_ARRAY [ CAN_CH0_ID_TOTAL_MAX ] =
         (( void * )0),
         (( void * )0),
     },
-
+    {
+        {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
+        {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
+        {0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u, 0x00u},
+        5000ul,
+        0x794ul,
+        (( void * )0),
+        (( void * )0),
+        (( void * )0),
+    },
 };
 
 
@@ -206,7 +215,39 @@ uint8_t  Get_CAN_CH0_ID_18FEFC17_Sig_Fuel_level(void)
 {
     return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_Send18FEFC17_Msg_Count, 1u) >> 0u) & 0xFFu));
 }
+uint8_t Get_CAN_CH0_ID_794_byte0_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 0u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte1_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 1u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte2_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 2u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte3_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 3u) >> 0u) & 0xFFu));
+}
 
+uint8_t Get_CAN_CH0_ID_794_byte4_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 4u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte5_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 5u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte6_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 6u) >> 0u) & 0xFFu));
+}
+uint8_t Get_CAN_CH0_ID_794_byte7_Sig(void)
+{
+    return (((uint8_t)((uint8_t)CAN_MSG_Read(CAN_CH0_ID_0x794_Msg_Count, 7u) >> 0u) & 0xFFu));
+}
 
 
 
@@ -241,6 +282,9 @@ uint8_t Co_Can_ConvertSubID(uint32_t MsgID)
     case CAN_CH0_ID_Send18FEFC17_Msg:
         u8Result = CAN_CH0_ID_Send18FEFC17_Msg_Count;
         break;
+    case CAN_CH0_ID_Send0x794_Msg:
+        u8Result = CAN_CH0_ID_0x794_Msg_Count;
+        break;
     default :
         u8Result = CAN_CH0_ID_TOTAL_MAX;
         break;

YueJin_test_bench/source/Appliciation/CAN_Communication_Matrix.h

@@ -12,7 +12,7 @@ typedef enum
     CAN_CH0_ID_Send18FEC1EE_Msg_Count,
     CAN_CH0_ID_Send0CFE6CEE_Msg_Count,
     CAN_CH0_ID_Send18FEFC17_Msg_Count,
-
+    CAN_CH0_ID_0x794_Msg_Count,
     CAN_CH0_ID_TOTAL_MAX,
 } CAN_MSG_ID_t;
 
@@ -33,7 +33,7 @@ extern const st_CAN_SendAttribute    st_CANSendAttr[ID_SEND_TOTAL] ;
 #define  CAN_CH0_ID_Send18FEC1EE_Msg    0x18FEC1EEul
 #define  CAN_CH0_ID_Send0CFE6CEE_Msg    0x0CFE6CEEul
 #define  CAN_CH0_ID_Send18FEFC17_Msg    0x18FEFC17ul
-
+#define  CAN_CH0_ID_Send0x794_Msg       0x794ul
  
 extern uint32_t Get_ID_ODO(void);
 extern uint32_t Get_ID_FUEL(void);
@@ -58,6 +58,14 @@ extern uint8_t  Get_CAN_CH0_ID_10FF1017_Sig_RHParkTailLightSts(void);
 extern uint32_t Get_CAN_CH0_ID_18FEC1EE_Sig_Total_Vehicle_Distance(void);
 extern uint16_t Get_CAN_CH0_ID_0CFE6CEE_Sig_Tachograph_vehicle_speed(void);
 extern uint8_t  Get_CAN_CH0_ID_18FEFC17_Sig_Fuel_level(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte0_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte1_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte2_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte3_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte4_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte5_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte6_Sig(void);
+extern uint8_t Get_CAN_CH0_ID_794_byte7_Sig(void);
 
 
 

YueJin_test_bench/source/Appliciation/CAN_Signal_Rx.c

@@ -121,7 +121,7 @@ void CanMSg_XMS_Analysis(canlib_uint16_t CbkCycle)
         }
     }
 }
-
+canlib_uint8_t test111 = 0;
 void Co_Can_Buff_Set(canlib_uint16_t MsgID, canlib_uint8_t m_DLC, canlib_uint8_t Msg [])
 {
     canlib_uint8_t  i;
@@ -134,6 +134,7 @@ void Co_Can_Buff_Set(canlib_uint16_t MsgID, canlib_uint8_t m_DLC, canlib_uint8_t
             for ( i = 0u; i < 8u; i++ )
             {
                 CanRXMsgOp.CAN_MSG_Analysis [ u16ConverIdx ].ReceiveBuf [ i ] = Msg [ i ];
+                test111 = CanRXMsgOp.CAN_MSG_Analysis [ u16ConverIdx ].ReceiveBuf [ i ];
             }
             CanRXMsgOp.CAN_MSG_Analysis [ u16ConverIdx ].CAN_Received = 1u;
             if ( CanRXMsgOp.pAttrubute [ u16ConverIdx ].Msg_ReceiveCBK != (( void * )0) )
@@ -143,15 +144,20 @@ void Co_Can_Buff_Set(canlib_uint16_t MsgID, canlib_uint8_t m_DLC, canlib_uint8_t
         }
     }
 }
-
+canlib_uint8_t testmsg = 0;
 canlib_uint8_t CAN_MSG_Read(canlib_uint16_t MsgIdx, canlib_uint8_t BuffIdx)
 {
     canlib_uint8_t ret = 0u;
+    if(MsgIdx == 6)
+    {
+        testmsg = 0;
+    }
     if ( MsgIdx < CanRXMsgOp.Total_Msg )
     {
         if ( BuffIdx < 8u )
         {
-            ret = CanRXMsgOp.CAN_MSG_Analysis [ MsgIdx ].AnalyzeMsg [ BuffIdx ];
+            testmsg = CanRXMsgOp.CAN_MSG_Analysis [ MsgIdx ].AnalyzeMsg [ BuffIdx ];
+            ret = CanRXMsgOp.CAN_MSG_Analysis [ MsgIdx ].ReceiveBuf [ BuffIdx ];
         }
         else
         {

YueJin_test_bench/source/Appliciation/COM_CAN.c

@@ -55,17 +55,17 @@ void  COM_CAN_Init(void)
     memset(Load_AttrBuff, 0, sizeof(Load_AttrBuff));
     memset(Load_Attr, 0, sizeof(Load_Attr));
     g_Verify_Result = 0;
-    Msg_Load_Init( );
+    // Msg_Load_Init( );
     Can_RX_BuffInit(( uint8_t * )pRXBuff, CAN_MSG_CONST_ARRAY, CAN_CH0_ID_TOTAL_MAX);
     if ( g_Verify_Result == 1U )
     {
-        Can_TX_BuffInit(( uint8_t * )pTXBuff, Load_Attr, PreLoad_Info->total_msg.word, Can_Write_FIFO);
+        // Can_TX_BuffInit(( uint8_t * )pTXBuff, Load_Attr, PreLoad_Info->total_msg.word, Can_Write_FIFO);
     }
-    CAN_RX_SetEnable(0x00);
+    CAN_RX_SetEnable(0x55);
     if ( g_Verify_Result == 1U )
     {
-        CAN_TX_SetEnable(0x55);
-        Execute_Specify_Step(0);
+        // CAN_TX_SetEnable(0x55);
+        // Execute_Specify_Step(0);
     }
 }
 

YueJin_test_bench/source/Appliciation/Diag_ID_Def.h

@@ -8,8 +8,8 @@
 #ifndef _DIAG_ID_DEF_H_
 #define _DIAG_ID_DEF_H_
 
-#define DIAG_ID_Tx                0x18DA17FAu            /*����ID*/
-#define DIAG_ID_Rx_PHY            0x18DAFA17u            /*����ID,����Ѱַ*/
-#define DIAG_ID_Rx_FUN            0x18DAFA17u            /*����ID,����Ѱַ*/
+#define DIAG_ID_Tx                0x714u            /*����ID*/
+#define DIAG_ID_Rx_PHY            0x794u            /*����ID,����Ѱַ*/
+#define DIAG_ID_Rx_FUN            0x794u            /*����ID,����Ѱַ*/
 
 #endif

YueJin_test_bench/source/Appliciation/Display_Info.h

@@ -75,7 +75,7 @@ void Buzzer_Start(void);
 void Buzzer_Stop(void);
 extern void Buzzer_Init(void);
 extern void Buzzer_Warning(void);
-
+void Display_Send_Vspead(uint8_t menu);
 
 
 void GUI_General_Digit_Display(uint32_t Digit, const uint8_t *Font[], uint8_t Len, uint8_t Blank, const uint16_t *px, uint16_t y);

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -2,22 +2,13 @@
 #include "Key.h"
 #include "Display_Info.h"
 #include "Check_Ctrl.h"
-
+extern uint8_t resetflag;
 void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
-        if ( (LED_Waring == 1) || (UDS_Warning_Voltage ==1))
-        {
-            ;
-        }
-        else
-        {
-            Display_Add( );
-            Display_TFT_Clear( );  
-        }  
-              
-               
+        // Display_Add( );
+        // Display_TFT_Clear( );           
         
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
@@ -31,8 +22,8 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
         }
         else
         {
-            Display_Add( );
-            Display_TFT_Clear( );  
+            // Display_Add( );
+            // Display_TFT_Clear( );  
         }  
              
         
@@ -51,8 +42,8 @@ void Key_Operation_SW4(Key_Event_en_t enKeyEvent)
         }
         else
         {
-            Display_Sub( );
-            Display_TFT_Clear( );  
+            // Display_Sub( );
+            // Display_TFT_Clear( );  
         }  
              
     }
@@ -67,8 +58,8 @@ void Key_Operation_SW4(Key_Event_en_t enKeyEvent)
         }
         else
         {
-            Display_Sub( );
-            Display_TFT_Clear( );  
+            // Display_Sub( );
+            // Display_TFT_Clear( );  
         }  
              
         
@@ -120,7 +111,7 @@ void Key_Operation_SW2(Key_Event_en_t enKeyEvent)
         }
         else
         {
-            MENU_CHECK_STEP_SUB( );
+            // MENU_CHECK_STEP_SUB( );
         }        
         
     }
@@ -135,7 +126,7 @@ void Key_Operation_SW2(Key_Event_en_t enKeyEvent)
         }
         else
         {
-            MENU_CHECK_STEP_SUB( );
+            // MENU_CHECK_STEP_SUB( );
         }  
     }
     else
@@ -147,15 +138,13 @@ void Key_Operation_SW1(Key_Event_en_t enKeyEvent)
         /*清零ODO*/
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
-        if ( LED_Waring == 1 || (UDS_Warning_Voltage ==1))
-        {
-            ;
-        }
-        else
+        if(resetflag == 0)
         {
             MENU_CHECK_STEP_ADD( );
         }
             
+        
+        
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {

YueJin_test_bench/source/Appliciation/RTE_CAN.c

@@ -32,14 +32,14 @@ void Can_Init(void)
     CAN_Frame_st_t     stCANFrame;
     RSCAN0_Config_st_t loc_can                      = {0};
     loc_can.stRSCANCh2.u32RSCANChEn                 = 0U;
-    loc_can.stRSCANCh2.enRSCANChBps                 = RSCAN_Baud_Rate_250K;
+    loc_can.stRSCANCh2.enRSCANChBps                 = RSCAN_Baud_Rate_500K;
     loc_can.stRSCANCh2.u32RSCANChRuleSize           = CANFD0_CH2_RX_RULE_SIZE;
     loc_can.stRSCANCh2.pfnRSCANConfirmCallBack      = Can_Confirm;
     loc_can.stRSCANCh2.pfnRSCANReadMsgCallBack      = Can_Read_Msg;
     loc_can.stRSCANCh2.pfnRSCANAbortConfirmCallBack = 0;
 
     loc_can.stRSCANCh4.u32RSCANChEn                 = 1U;
-    loc_can.stRSCANCh4.enRSCANChBps                 = RSCAN_Baud_Rate_250K;
+    loc_can.stRSCANCh4.enRSCANChBps                 = RSCAN_Baud_Rate_500K;
     loc_can.stRSCANCh4.u32RSCANChRuleSize           = CANFD0_CH4_RX_RULE_SIZE;
     loc_can.stRSCANCh4.pfnRSCANConfirmCallBack      = Can_Confirm;
     loc_can.stRSCANCh4.pfnRSCANReadMsgCallBack      = Can_Read_Msg;
@@ -152,8 +152,14 @@ void Can_Abort_All(void)
 }
 
 /*****Lower*******/
+uint8_t testewewe = 0;
 void Can_Read_Msg(uint32_t m_id, uint8_t m_dlc, uint8_t m_Msg [])
 {
+    if(m_id == 0x794)
+    {
+            testewewe = Co_Can_ConvertSubID(m_id);
+    }
+
     Co_Can_Buff_Set(Co_Can_ConvertSubID(m_id), m_dlc, m_Msg);
     if ( (m_id == DIAG_ID_Rx_FUN) || (m_id == DIAG_ID_Rx_PHY) )
     {
@@ -190,7 +196,7 @@ void Can_Confirm(uint32_t Identifier, uint8_t TransferStatus)
             MSG_ID = 0x69bul;
             break;
         case RSCAN_CHANNEL_BUF_8:
-            MSG_ID = 0x28Aul;
+            MSG_ID = 0x794ul;
             break;
         case RSCAN_CHANNEL_BUF_1:
             MSG_ID = DIAG_ID_Tx;

YueJin_test_bench/source/Appliciation/RTE_CAN.h

@@ -2,7 +2,7 @@
 #define _RTE_CAN_H_
 
 #include "TYW_stdint.h"
-
+#include "string.h"
 typedef struct
 {
     uint8_t Status;    //当前所处Bus Off 状态

YueJin_test_bench/source/Appliciation/RTE_GPIO.h

@@ -5,22 +5,22 @@
 #include "TYW_stdint.h"
 #include "GPIO.h"
 
-#define LINE_IN_CHARGE         GPIO_IN_PORT11_PIN00
-#define LINE_IN_BRAKE_LEVELn   GPIO_IN_PORT08_PIN08
-#define LINE_IN_OIL_PRESSUREn  GPIO_IN_PORT08_PIN09
-#define LINE_IN_WASHING_LEVELn GPIO_IN_PORT09_PIN01
-#define LINE_IN_PARKn          GPIO_IN_PORT09_PIN00
-
-#define LED1 GPIO_OUT_APORT00_PIN07
-#define LED2 GPIO_OUT_APORT00_PIN08
-#define LED3 GPIO_OUT_APORT00_PIN10
-#define LED4 GPIO_OUT_APORT00_PIN11
-#define LED5 GPIO_OUT_APORT00_PIN12
-#define LED6 GPIO_OUT_PORT10_PIN06
-#define LED7 GPIO_OUT_PORT10_PIN06
-
-#define LCDAL GPIO_IN_APORT00_PIN13
-#define LCDAR GPIO_IN_APORT00_PIN14
+// #define LINE_IN_CHARGE         GPIO_IN_PORT11_PIN00
+// #define LINE_IN_BRAKE_LEVELn   GPIO_IN_PORT08_PIN08
+// #define LINE_IN_OIL_PRESSUREn  GPIO_IN_PORT08_PIN09
+// #define LINE_IN_WASHING_LEVELn GPIO_IN_PORT09_PIN01
+// #define LINE_IN_PARKn          GPIO_IN_PORT09_PIN00
+
+// #define LED1 GPIO_OUT_APORT00_PIN07
+// #define LED2 GPIO_OUT_APORT00_PIN08
+// #define LED3 GPIO_OUT_APORT00_PIN10
+// #define LED4 GPIO_OUT_APORT00_PIN11
+// #define LED5 GPIO_OUT_APORT00_PIN12
+// #define LED6 GPIO_OUT_PORT10_PIN06
+// #define LED7 GPIO_OUT_PORT10_PIN06
+
+// #define LCDAL GPIO_IN_APORT00_PIN13
+// #define LCDAR GPIO_IN_APORT00_PIN14
 
 #define SW1  GPIO_IN_APORT00_PIN00   
 #define SW2  GPIO_IN_PORT10_PIN05 
@@ -39,18 +39,18 @@
 #define FUEL_RES_3 GPIO_OUT_PORT08_PIN10
 #define FUEL_RES_4 GPIO_OUT_PORT08_PIN11
 
-#define LINE_OUT_CHARGER     GPIO_OUT_PORT10_PIN06//
-#define LINE_OUT_OIL         GPIO_OUT_PORT10_PIN06
-#define LINE_OUT_BREAK_LEVEL GPIO_OUT_PORT10_PIN06
-#define LINE_OUT_WARSH_LEVEL GPIO_OUT_PORT10_PIN06
-#define LINE_OUT_PARK        GPIO_OUT_PORT10_PIN06
-#define LINE_OUT_EPS         GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_CHARGER     GPIO_OUT_PORT10_PIN06//
+// #define LINE_OUT_OIL         GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_BREAK_LEVEL GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_WARSH_LEVEL GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_PARK        GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_EPS         GPIO_OUT_PORT10_PIN06 //远光
 
 #define POWER_CTRL_KL30         GPIO_OUT_PORT10_PIN13
 #define POWER_CTRL_KL15         GPIO_OUT_PORT10_PIN12
 #define POWER_CTRL_KL30_Current GPIO_OUT_PORT10_PIN14
 
-#define LINE_OUT_FANGDAO GPIO_OUT_PORT10_PIN06
+// #define LINE_OUT_FANGDAO GPIO_OUT_PORT10_PIN06
 
 #define SD_FMQ  GPIO_OUT_PORT10_PIN02
 #define PWM_FMQ GPIO_OUT_PORT10_PIN11
@@ -68,21 +68,25 @@
 #define  NEG_10_Ctrl  GPIO_OUT_PORT00_PIN08
 
 
-#define  LINE_SafeBelt_1  NEG_1_Ctrl
-#define  LINE_SafeBelt_2  NEG_2_Ctrl
-#define  LINE_SafeBelt_3  NEG_3_Ctrl
-#define  LINE_SafeBelt_4  NEG_4_Ctrl
-#define  LINE_SafeBelt_5  NEG_5_Ctrl
+// #define  LINE_SafeBelt_1  NEG_1_Ctrl
+// #define  LINE_SafeBelt_2  NEG_2_Ctrl
+// #define  LINE_SafeBelt_3  NEG_3_Ctrl
+// #define  LINE_SafeBelt_4  NEG_4_Ctrl
+// #define  LINE_SafeBelt_5  NEG_5_Ctrl
 
-#define  LINE_SafeBelt_2_press  NEG_6_Ctrl
-#define  LINE_SafeBelt_3_press  NEG_7_Ctrl
-#define  LINE_SafeBelt_4_press  NEG_8_Ctrl
-#define  LINE_SafeBelt_5_press  NEG_9_Ctrl
+// #define  LINE_SafeBelt_2_press  NEG_6_Ctrl
+// #define  LINE_SafeBelt_3_press  NEG_7_Ctrl
+// #define  LINE_SafeBelt_4_press  NEG_8_Ctrl
+// #define  LINE_SafeBelt_5_press  NEG_9_Ctrl
 
-//ljs
+
+//左转
 #define LINE_OUT_POS_01 GPIO_OUT_PORT10_PIN06
+//右转
 #define LINE_OUT_POS_02 GPIO_OUT_PORT09_PIN00
+//远光
 #define LINE_OUT_POS_03 GPIO_OUT_APORT00_PIN04
+//位置灯
 #define LINE_OUT_POS_04 GPIO_OUT_APORT00_PIN05
 #define LINE_OUT_POS_05 GPIO_OUT_APORT00_PIN06
 #define LINE_OUT_POS_06 GPIO_OUT_APORT00_PIN13
@@ -91,15 +95,25 @@
 #define LINE_OUT_POS_09 GPIO_OUT_PORT08_PIN08
 #define LINE_OUT_POS_10 GPIO_OUT_PORT00_PIN07
 
+//安全带//R挡
 #define LINE_OUT_NEG_01 GPIO_OUT_PORT09_PIN06
+//机油压力//L挡
 #define LINE_OUT_NEG_02 GPIO_OUT_PORT09_PIN05
+//H挡//发动机故障
 #define LINE_OUT_NEG_03 GPIO_OUT_PORT09_PIN04
+//P挡//驻车指示灯
 #define LINE_OUT_NEG_04 GPIO_OUT_PORT09_PIN03
+//开关后桥状态//制动失效
 #define LINE_OUT_NEG_05 GPIO_OUT_PORT09_PIN02
+//马达2驱信号
 #define LINE_OUT_NEG_06 GPIO_OUT_PORT09_PIN01
+//马达4驱信号//空挡
 #define LINE_OUT_NEG_07 GPIO_OUT_PORT10_PIN07
+//马达4驱锁死信号
 #define LINE_OUT_NEG_08 GPIO_OUT_PORT10_PIN03
+//开关2驱信号
 #define LINE_OUT_NEG_09 GPIO_OUT_PORT10_PIN04
+//B-5开关4驱信号
 #define LINE_OUT_NEG_10 GPIO_OUT_PORT00_PIN08
 
 #define LINE_FUEL_RES01 GPIO_OUT_PORT00_PIN13

YueJin_test_bench/source/Appliciation/Task.c

@@ -15,6 +15,7 @@
 #include "Display_Info.h"
 #include "Key.h"
 #include "Check_Ctrl.h"
+#include "CAN_APP.h"
 /*******************************************************************************
  *                                                                              *
  *   ϵͳ��������ģʽ(SYS_MODE_OFF / SYS_MODE_ON / SYS_MODE_STANDBY )�����б�   *
@@ -27,9 +28,10 @@
 void Sys_Run_Mode_Pseudo_Real_Time_Tasks(void)
 {    
     SD_FMQ = 1;
-    DoCAN_Communication_Service( );
-    UDS_Server_Application_Service( );
+    // DoCAN_Communication_Service( );
+    // UDS_Server_Application_Service( );
     TFT_LCD_Display_Update_Service( );
+    Get_PN_msg();
 }
 /*============================================================================*/
 
@@ -53,12 +55,77 @@ void Sys_Run_Mode_5ms_Tasks_Group(void)
 /*==============================================================================
 10ms����ִ������ ��0��
 ------------------------------------------------------------------------------*/
-
+uint32_t fakedelay = 0;
+uint32_t send0x714time = 0;
+uint8_t cycleflag = 0;
+uint8_t getmsgfinish = 0;
+extern uint8_t SWtestresult;
+extern uint8_t HWtestresult;
+extern uint8_t PNtestresult;
+extern uint8_t resetflag;
 void Sys_Run_Mode_10ms_Tasks_Group(void)
 {
     BusOff_Service( );
     Key_Service( );
 
+    resetchangeUDSfuc();
+    if(fakedelay < 100)
+    {
+        fakedelay++;
+    }
+    else
+    {
+        change_UDS_DID();
+        // cycleflag = 1;
+    }
+    if(resetflag == 0)
+    {
+        if(cycleflag == 1)
+        {
+            if(MENU_CHECK_STEP == 0)
+            {
+                if(send0x714time < 4)
+                {
+                    send0x714time++;
+                }
+                else
+                {
+                    send_0x714_fuc();
+                    send0x714time = 0;
+                }
+                
+            }
+            else
+            {
+                send0x714time = 0;
+            }
+        }
+
+
+        if(MENU_CHECK_STEP != 0)
+        {
+            can_submit();
+        }
+    }
+
+    // if(getmsgfinish == 0)
+    // {
+    //     if(cycleflag == 0)
+    //     {
+
+
+    //     }
+    //     else
+    //     {
+
+    //         send_0x714_fuc();
+            
+    //         // cycleflag = 0;
+    //     }
+    // }
+
+
+
 
     //刷数字、刷英文拼写。
     //GUI_General_Digit_Display(123456789, Num_09, 10, 0, BackLightDigitNum09PosX, 79);
@@ -79,6 +146,7 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
 void Sys_Run_Mode_20ms_Tasks_Group0(void)
 {
     //Total_Check( );
+
 }
 
 /*==============================================================================
@@ -90,10 +158,10 @@ void Sys_Run_Mode_50ms_Tasks_Group(void)
 
     timer_100ms++;
     
-    
+    // Buzzer_Init();
     if ( timer_100ms == 1 )
     {
-        Read_IPK_Session_Type( );//请求仪表发送 软硬件版本号 等数据。  
+        // Read_IPK_Session_Type( );//请求仪表发送 软硬件版本号 等数据。  
             
     }
     else if ( timer_100ms == 2 )
@@ -106,6 +174,7 @@ void Sys_Run_Mode_50ms_Tasks_Group(void)
 100ms����ִ������ ��0��
 ------------------------------------------------------------------------------*/
 uint16_t u16LJSText;
+uint8_t time300ms;
 void Sys_Run_Mode_100ms_Tasks_Group(void)
 {
     static uint32_t loc_timer = 0;
@@ -113,11 +182,24 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
     if ( loc_timer >= 15 )
     {
         loc_timer = 0;
-        HW_CHECK_IPK_EXIST( );
+        // HW_CHECK_IPK_EXIST( );
     }
+    // if(time300ms < 20)
+    // {
+    //     time300ms++;
+    // }
+    // else
+    // {
+        
+    //     time300ms = 0;
+    // }
+    
+    // Get_ID_0x794_Msg();
+    // Display_PageNum();
 
-    Display_PageNum();
 
+    //硬线车速输出懒得改名了
+    Buzzer_Start();
     Total_Check( );
     //u16LJSText = TFT_LCD_REQ_FIFO_MAX_DEPTH;
 }

YueJin_test_bench/source/Driver/GPIO/GPIO.c

@@ -42,23 +42,23 @@ const uint16_t g_u16GPIOConfigArray[56U][2U] =
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x0020u, 0x0000u},
-    {0x0620u, 0x0600u},
+    {0x5020u, 0x5020u},
+    {0x0620u, 0x0620u},
+    {0x0000u, 0x0000u},
+    {0x0000u, 0x0000u},
+    {0x5630u, 0x5630u},
+    {0x0A6Fu, 0x0A6Fu},
+    {0x29CFu, 0x29CFu},
+    {0x0000u, 0x0000u},
+    {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x0630u, 0x0600u},
-    {0x4220u, 0x2207u},
-    {0x79CFu, 0x79FFu},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x0000u, 0x0008u},
     {0x0000u, 0x0000u},
-    {0x0000u, 0x0003u},
-    {0x0000u, 0x0008u},
-    {0x0000u, 0x0008u},
-    {0x1FFFu, 0x1FF7u},
+    {0x1FFFu, 0x1FFFu},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
@@ -72,27 +72,27 @@ const uint16_t g_u16GPIOConfigArray[56U][2U] =
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x8800u, 0x0000u},
-    {0x8800u, 0x0000u},
+    {0x8000u, 0x8000u},
+    {0x8000u, 0x8000u},
+    {0x0000u, 0x0000u},
+    {0x0000u, 0x0000u},
+    {0x0000u, 0x0000u},
+    {0x8000u, 0x8000u},
+    {0x0020u, 0x0000u},
+    {0x7FFFu, 0x7FFFu},
+    {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x0004u, 0x0200u},
-    {0x8800u, 0x0000u},
-    {0x8020u, 0x0000u},
-    {0x77FFu, 0xFFFFu},
+    {0x0001u, 0x0001u},
+    {0x0001u, 0x0001u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
     {0x0000u, 0x0000u},
-    {0x0005u, 0x0000u},
-    {0x0005u, 0x0000u},
+    {0x0001u, 0x0001u},
     {0x0000u, 0x0000u},
+    {0x00FEu, 0x00FEu},
     {0x0000u, 0x0000u},
-    {0x0000u, 0x0080u},
-    {0x0005u, 0x0000u},
-    {0x0001u, 0x0005u},
-    {0x00FAu, 0x00FFu},
-    {0x8080u, 0x1000u},
-    {0x000Fu, 0x673Fu},
+    {0x000Fu, 0x0200u},
     {0xFFFFu, 0xFFFFu},
 };
 static void GPIO_PIN_Init(GPIO_Config_Mode_en_t enGPIOConfigMode)

YueJin_test_bench/source/Driver/TimerB/TimerB.c

@@ -12,10 +12,10 @@
 #define TIMERB_TIMEROUT_MAX 50U
 
 /*----target clock----------*/
-#define TIMERB_0_CK0 5000000UL
-#define TIMERB_0_CK1 5000000UL
-#define TIMERB_0_CK2 5000000UL
-#define TIMERB_0_CK3 5000000UL
+#define TIMERB_0_CK0 1250000UL
+#define TIMERB_0_CK1 1250000UL
+#define TIMERB_0_CK2 1250000UL
+#define TIMERB_0_CK3 1250000UL
 
 /*-----default clock---------*/
 #define TIMERB_PPLLCLK2 40000000UL

YueJin_test_bench/source/System/init.c

@@ -81,6 +81,8 @@ void Sys_Startup_Init(void)
     Display_Title_Info( );
     Key_Init( );
     Buzzer_Init();
+    POWER_CTRL_KL30   = 1u;  //B+
+    POWER_CTRL_KL15   = 1u;  //KL15
 }
 
 /***********************************************************************