Skip to content

J
jiancetai
Commit 1b967fbf authored by 李梓源's avatar 李梓源
Browse files
Options

✨ feat:新板子变更引脚

parent 574989e7
Show whitespace changes
Inline Side-by-side
Showing with 33 additions and 26 deletions
YueJin_test_bench/source/Appliciation/Check_Ctrl.c
View file @ 1b967fbf
......@@ -326,7 +326,7 @@ uint8_t yibiaoshuju[34];
default:
POWER_CTRL_KL30 = 0u;
// POWER_CTRL_KL30 = 0u;
POWER_CTRL_KL15 = 0u;
CAN_Msg_Tx_Enable = 1u;
Display_Menu_Type = 0;
......@@ -613,7 +613,7 @@ void Function_Check_Ctrl(uint32_t cmd)
{
}
// ONE_START = 1;
break;
}
......@@ -645,26 +645,26 @@ void Function_Check_Ctrl(uint32_t cmd)
if(ONE_KEY_ONOFF <= 20)
{
RELAY_KEY_MCU = 1;
ONE_START = 0;
ONE_START = 1;
}
else if(ONE_KEY_ONOFF <= 40)
{
RELAY_KEY_MCU = 0;
ONE_START = 1;
ONE_START = 0;
}
else if(ONE_KEY_ONOFF <= 60)
{
RELAY_KEY_MCU = 0;
ONE_START = 0;
ONE_START = 1;
}
else if(ONE_KEY_ONOFF <=70)
{
RELAY_KEY_MCU = 0;
ONE_START = 1;
ONE_START = 0;
}
else if(ONE_KEY_ONOFF>110 && ONE_KEY_ONOFF <=120)
{
ONE_START = 0;
ONE_START = 1;
ABC_OUT = 1;
}
else
......@@ -678,7 +678,7 @@ void Function_Check_Ctrl(uint32_t cmd)
RELAY_VBAT_MCU = 1;
RELAY_DC12V_MCU = 1;
RELAY_KEY_MCU = 1;
ONE_START = 0;
ONE_START = 1;
FULL_BEAM = 0;
break;
}
......@@ -735,23 +735,23 @@ void Function_Check_Ctrl(uint32_t cmd)
RELAY_LIGHTCONTROL_MCU = 0;
if(ACCONOFF_delay_3s <= 5)
{
ONE_START = 0;
ONE_START = 1;
}
else if(ACCONOFF_delay_3s > 5 && ACCONOFF_delay_3s <= 8)
{
ONE_START = 1;
ONE_START = 0;
}
else if(ACCONOFF_delay_3s > 10 && ACCONOFF_delay_3s <= 13)
{
ONE_START = 0;
ONE_START = 1;
}
else if(ACCONOFF_delay_3s > 13 && ACCONOFF_delay_3s <= 17)
{
ONE_START = 1;
ONE_START = 0;
}
else
{
ONE_START = 0;
ONE_START = 1;
}
if(ACCONOFF_delay_3s > 17 && CHECK_Value == 0)
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.c
View file @ 1b967fbf
......@@ -173,6 +173,12 @@ void RTE_GPIO_Init(void)
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_0;
gpio_temp.enGPIOPIN = GPIO_PIN_4;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
// queren = 0;
// LINE_OUT_NEG_01 = 1;
// LINE_OUT_NEG_02 = 1;
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.h
View file @ 1b967fbf
......@@ -7,8 +7,8 @@
#define LINE_OUT_NEG_09 GPIO_OUT_PORT10_PIN04 //485_RE
#define ONE_START GPIO_OUT_PORT10_PIN14 //一键启动
#define ABC_OUT GPIO_OUT_PORT10_PIN13 //ABC轮动报警输出
#define ONE_START GPIO_OUT_PORT10_PIN13 //一键启动
#define ABC_OUT GPIO_OUT_PORT00_PIN04 //ABC轮动报警输出
#define RELAY_VBAT_MCU GPIO_OUT_PORT10_PIN10
#define RELAY_DC12V_MCU GPIO_OUT_PORT10_PIN09
......@@ -45,7 +45,7 @@
/* ---------------------旧的-------------------------- */
#define POWER_CTRL_KL30 GPIO_OUT_PORT10_PIN13
// #define POWER_CTRL_KL30 GPIO_OUT_PORT10_PIN13
#define POWER_CTRL_KL15 GPIO_OUT_PORT10_PIN12
#define SW10 GPIO_IN_PORT10_PIN02
#define LINE_OUT_NEG_01 GPIO_OUT_PORT09_PIN06 //12V
......
YueJin_test_bench/source/Appliciation/app_lsdn.c
View file @ 1b967fbf
......@@ -14,7 +14,7 @@ void set_pin_high(uint8_t mode)
}
else
{
ONE_START = 0;
ONE_START = 1;
}
}
void set_pin_low(uint8_t mode)
......@@ -28,7 +28,7 @@ void set_pin_low(uint8_t mode)
}
else
{
ONE_START = 1;
ONE_START = 0;
}
}
void lsdn_delay_us(uint32_t us)
......
YueJin_test_bench/source/System/init.c
View file @ 1b967fbf
......@@ -77,7 +77,8 @@ void Sys_Startup_Init(void)
// GPIO_DIR_PORT00_PIN08 = 1;
// TX_OUT = 0;
ONE_START = 0;
ONE_START = 1;
ABC_OUT = 0;
GPIO_SET_KEPP( );
RTE_ADC_Init( );
......@@ -110,7 +111,7 @@ void Sys_Startup_Init(void)
loc_config.pfnUARTConfirmCallBack = 0;
loc_config.pfnUARTErrHandleCallBack = 0;
loc_config.pfnUARTReadMsgCallBack = UART_Put1;
UART_Init(UART_RLIN31, &loc_config);
// UART_Init(UART_RLIN31, &loc_config);
// Auto_ONOFF = 1;
// AutoFlag = 1;
}
......
YueJin_test_bench/utility/GPIO/GPIO.c
View file @ 1b967fbf
......@@ -48,7 +48,7 @@ const uint16_t g_u16GPIOConfigArray[56U][2U] =
{0x0000u, 0x0000u},
{0x0630u, 0x0600u},
{0x0220u, 0x2207u},
{0x79CFu, 0x79FFu},
{0x79DFu, 0x79FFu},
{0x0000u, 0x0000u},
{0x0000u, 0x0000u},
{0x0000u, 0x0000u},
......
YueJin_test_bench/utility/诊断工具1.10.11 x64/Option/GPIO_RH850_F1KM_CFG.json
View file @ 1b967fbf
......@@ -198,7 +198,7 @@
"pinName": "Pin_P0_04",
"pinAddress": "11",
"wakeupPin": {
"PinModeName": "CAN2TX",
"PinModeName": "GPIO_OUT",
"PUn": false,
"PDn": false,
"PISn": false,
......@@ -207,9 +207,9 @@
"PFCAEn": false,
"PIPCn": false,
"Pn": false,
"PMCn": true,
"PMCn": false,
"PMn": false,
"PIBCn": false
"PIBCn": true
},
"sleepPin": {
"PinModeName": "GPIO_OUT",
......
YueJin_test_bench/utility/诊断工具1.10.11 x64/Option/Option.properties
View file @ 1b967fbf
#new Option
#Wed Feb 19 15:12:14 CST 2025
#Fri Mar 21 11:10:29 CST 2025
IsSort=true
MergeFlashIsCompression=false
ChangeAppFilePath=
......@@ -10,7 +10,7 @@ MergeCrcTtpe=1
MergeBootFilePath=
IsMergeChangeAddress=false
MergeFlashOutPutFilePath=D\:\\Code\\\u7231\u739B\u68C0\u6D4B\u53F0\\\u56FE\u7247
GPIOOutPutPath=
GPIOOutPutPath=C\:\\Users\\Lenovo\\Desktop
MergeCanDBCPath=
IsFilling=true
RxID=729
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment