✨ feat:老化板同时连多块表只发不收

YueJin_test_bench/source/Appliciation/Display_Info.c

@@ -4902,7 +4902,7 @@ void Display_Version_Info(uint32_t ON_OFF)
         // TFT_LCD_Draw_Bmp(3,   160,  ( uint8_t * )gImage_Alarm_12_WordX6_Y165);  //24脚输出占空比
         // TFT_LCD_Draw_Bmp(210,   160,  ( uint8_t * )gImage_Alarm_13_ImageX222_Y166);  //%
         TFT_LCD_Draw_Bmp(3,   290,  ( uint8_t * )gImage_gImage_checkVX6_Y165 );      //检测台版本号
-        uint8_t mbuff [7] = {2,5,1,1,2,7,0xff};
+        uint8_t mbuff [7] = {2,5,1,1,2,8,0xff};
         General_Number_Disp(mbuff, 160, 290);  
 
     } 
@@ -5632,7 +5632,7 @@ void Display_Send_Vspead(uint8_t menu)
         case 9:
         // GUI_Display_Version_Code_Service(25, 20, "Please    enter    password ", Letter_Num_11, PCodeText_Space_size);
             Battery_evel = 0;
-            VSpeed_val = 99;
+            VSpeed_val = 0;
             GUI_Display_Version_Code_Service(3, 40+25+25+25+25+25+25+25, "ALL", Letter_Num_11, PCodeText_Space_size);
             break;
         // case 14:

YueJin_test_bench/source/Appliciation/Task.c

@@ -39,14 +39,14 @@ void Sys_Run_Mode_Pseudo_Real_Time_Tasks(void)
     Fre_In_Service(FRE_VEHICLE);
 
 
-    if(UART_Ch0_Get_TX_Busy_Flag())
-    {
+    // if(UART_Ch0_Get_TX_Busy_Flag())
+    // {
         LINE_OUT_NEG_09 = 1;        //发送
-    }
-    else
-    {
-        LINE_OUT_NEG_09 = 0;        //接收
-    }
+    // }
+    // else
+    // {
+    //     LINE_OUT_NEG_09 = 0;        //接收
+    // }
 
 
 }
@@ -140,10 +140,6 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
     }
     Display_PageNum();
 
-    if(RS485_send_time<0xFFFFFFFF)
-    {
-        RS485_send_time++;
-    }
     if(firstpowerflag == 2)
     {
         if(AutoFlag == 1)
@@ -155,19 +151,7 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
             else
             {
                 MENU_CHECK_STEP_ADD( );   
-                if(MENU_CHECK_STEP == 0)
-                {
-                    MENU_CHECK_STEP = 0;
-                }
-                if(MENU_CHECK_STEP == 13)
-                {
-                    AutoTime = 0;
-                }
-                else
-                {
-                    AutoTime = 160;
-                }
-                
+                AutoTime = 160;
             }
             
         }

YueJin_test_bench/source/Appliciation/api_RS485.c

@@ -25,6 +25,7 @@ static uint8_t u8RS485RecVldID[RS485_Rx_ID_Idx_Max];
 uint32_t RS485_send_time = 0;
 // uint32_t RS485_send_num = 0;
 uint8_t RS485_TX_finish = 0;
+uint8_t RS485_TX_finish_laohua = 0;
 // static RS485_Tx_Data_Ctrl_st_t stRS485TxData[RS485_Tx_ID_Idx_Max];
 
 #define HEAD_LEN 2
@@ -35,7 +36,7 @@ uint8_t RS485_TX_finish = 0;
 #define DATA_FRAME_TX_PERIOD_COUNT  10
 
 #define UDS485SendTime 10
-#define Dot485SendTime 1
+#define Dot485SendTime 10
 _ID0X40h_Data R485_ID40h;
 _ID0X48h_Data R485_ID48h;
 _ID0X41h_Data R485_ID41h;
@@ -638,18 +639,17 @@ uint8_t RS485_User_Tx_Data(void)
 uint8_t SendTime = 0;
 void backsend(void)
 {
-    if(zhenduanflag == Data_Mode_Write)
-    {
-        SendTime = UDS485SendTime;
-    }
-    else
+    SendTime = Dot485SendTime;
+
+    if(RS485_send_time<0xFFFFFFFF)
     {
-        SendTime = Dot485SendTime;
+        RS485_send_time++;
     }
+
     if(RS485_send_time >= SendTime)
     {
         RS485_send_time = 0;
-        RS485_TX_finish = 0;
+        RS485_TX_finish_laohua = 0;
     }
 }
 void TX_RX_485_service(void)
@@ -657,23 +657,24 @@ void TX_RX_485_service(void)
     uint32_t sendfinishflag;
     // if(clearOdoFlag == 0)
     // {
-        if(RS485_TX_finish == 0)
+        if(RS485_TX_finish_laohua == 0)
         {
             LINE_OUT_NEG_09 = 1;
             if(zhenduanflag == Data_Mode_Dot)
             {
                 RS485_User_Tx_Data();
             }
-            else if((zhenduanflag == Data_Mode_Write) || (zhenduanflag == Data_Mode_Read))
-            {
-                R485_Send_0x04();
-                R485_Send_0x80();
-            }
-        }
-        else
-        {
-            Recv_Byte();
+            RS485_TX_finish_laohua = 1;
+            // else if((zhenduanflag == Data_Mode_Write) || (zhenduanflag == Data_Mode_Read))
+            // {
+            //     R485_Send_0x04();
+            //     R485_Send_0x80();
+            // }
         }
+        // else
+        // {
+        //     Recv_Byte();
+        // }
     // }
     // else
     // {