✨ feat:优化切换下一步的条件限制

YueJin_test_bench/source/Appliciation/Check_Ctrl.c

@@ -591,11 +591,28 @@ void Function_Check_Ctrl(uint32_t cmd)
         switch (MENU_CHECK_STEP)
         {
             case 0:       
+            {
+                if(CHECK_Ctrl_delay <= 10)
+                {
+                    RELAY_VBAT_MCU = 0;
+                    RELAY_DC12V_MCU = 0;
+                    RELAY_KEY_MCU = 0;
+                }
+                else if ( CHECK_Ctrl_delay > 10 && CHECK_Ctrl_delay <= 60)
                 {
                     RELAY_VBAT_MCU = 1;
                     RELAY_DC12V_MCU = 1;
                     RELAY_KEY_MCU = 1;
+                   
+                }
+                else if(CHECK_Ctrl_delay > 60 && CHECK_Ctrl_delay <= 65)
+                {
                     Aima_SLF(1u, 0x03, 0x1, 1u);
+                }
+                else
+                {
+
+                }
 
                 
                 break;

YueJin_test_bench/source/Appliciation/Display_Info.c

@@ -4409,7 +4409,7 @@ void Display_Send_ODO(uint8_t fuel)
 
 
 }
-uint8_t CHECK_Value = 1;
+uint8_t CHECK_Value = 0;
 uint8_t DIS_VALUE = 0;
 const uint16_t Volatile[] = {90,80};
 void Display_Send_Vspead(uint8_t menu)
@@ -4433,8 +4433,11 @@ void Display_Send_Vspead(uint8_t menu)
         switch (menu)
         {
             case 0:
+            {
+                if(CHECK_Ctrl_delay >= 75)
                 {
                     CHECK_Value = 1;
+                }
                 break;
             }
             case 1:
@@ -4448,8 +4451,16 @@ void Display_Send_Vspead(uint8_t menu)
             {
                 if(DIS_VALUE == 1)
                 {
-                    CHECK_Value = 1;
+                    
+                    if(DIS_AD == 1)
+                    {
                         DIS_VALUE = 0;
+                        CHECK_Value = 1; 
+                    }
+                    else
+                    {
+                        CHECK_Value = 0; 
+                    }
                 }
                 // TFT_LCD_Draw_Box(0, 261, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);
             }
@@ -4473,27 +4484,42 @@ void Display_Send_Vspead(uint8_t menu)
            {
                if(DIS_VALUE == 1)
                { 
-                   CHECK_Value = 1;
+                   if(DIS_AD == 1)
+                   {
                     DIS_VALUE = 0;  
+                    CHECK_Value = 1;   
+                   }
+                   else
+                   {
+                       CHECK_Value = 0; 
+                   }   
                }
                // TFT_LCD_Draw_Box(0, 261, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);
            }
             break;
         case 3:
-        if(LOGOTY_AD == 1)
+        if(CHECK_Ctrl_delay >= 30)
         {
             CHECK_Value = 1;
+        }
+
+        if(LOGOTY_AD == 1)
+        {
+            // CHECK_Value = 1;
             TFT_LCD_Draw_Bmp(51,261,( uint8_t * )gImage_Alarm_13_Word0X51_Y261);
         }
         else
         {
-            CHECK_Value = 1;
+            // CHECK_Value = 1;
             TFT_LCD_Draw_Box(0, 261, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);
         }  
            
             break;
         case 4:  
+        if(CHECK_Ctrl_delay >= 30)
+        {
             CHECK_Value = 1;
+        }
             break;
         case 5:
         ZXSW_Voltage = ADC_Read_Signal(ADC_CH_ZXSW_VOLTAGE);

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -20,8 +20,13 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
 void Key_Operation_SW4(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
+    {
+        if ( MENU_CHECK_STEP != 0 )
         {
         MENU_CHECK_STEP_SUB();
+        CHECK_Ctrl_delay = 0;
+        CHECK_Value = 0;
+        }
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {

YueJin_test_bench/source/Appliciation/Task.c

@@ -324,7 +324,7 @@ uint8_t flashtime = 0;
 uint8_t showtime = 0;
 uint8_t ACCONOFF_delay_3s;
 uint16_t ONE_KEY_ONOFF;
-uint16_t CHECK_Ctrl_delay = 200;
+uint16_t CHECK_Ctrl_delay = 0;
 void Sys_Run_Mode_100ms_Tasks_Group(void)
 {
     // static uint32_t loc_timer = 0;