Skip to content

J
jiancetai
Commit 7d6bd508 authored by huangguoqing's avatar huangguoqing
Browse files
Options

✨ feat:增加自走模式，打点模式，控制15电，NFCkaguanji v100banben

parent d08ff987
Hide whitespace changes
Inline Side-by-side
Showing with 174 additions and 153 deletions
YueJin_test_bench/source/Appliciation/Barcode_Scanner.c
View file @ 7d6bd508
......@@ -64,17 +64,17 @@ void datacheck(void)
{
uint8_t dataopenBuff [ 11 ] ={0x07,0x36,0xAD,0x0F,0x0F,0x11,0x01,0x02,0x03,0x04,0xE6};
uint8_t datacloseBuff [ 11 ] ={0x07,0x36,0x33,0x0F,0x0F,0x11,0x01,0x02,0x03,0x04,0x6C};
// if(memcmp(BarCode,dataopenBuff,11) == 0)
// {
// POWER_CTRL_KL15 = 1;
// }
// else
// {
// if(memcmp(BarCode,datacloseBuff,11) == 0)
// {
// POWER_CTRL_KL15 = 0;
// }
// }
if(memcmp(BarCode,dataopenBuff,11) == 0)
{
POWER_CTRL_KL15 = 1;
}
else
{
if(memcmp(BarCode,datacloseBuff,11) == 0)
{
POWER_CTRL_KL15 = 0;
}
}
memset(BarCode, 0, sizeof(BarCode));
......
YueJin_test_bench/source/Appliciation/CAN_APP.c
View file @ 7d6bd508
......@@ -36,12 +36,10 @@ uint8_t CrcCheckSum(uint8_t *data, uint8_t len)
void CAN_MSG_COUNTER_PLUS(void)
{
}
uint8_t VSpeed = 0;
void Can_Set_Buff_200(uint8_t CopyData [])
{
uint8_t i = 0u;
uint32_t wtemp = 0u;
VSpeed = 0;
CANMsg220Union *pCANMsg;
pCANMsg = (CANMsg220Union *)CopyData;
......@@ -53,46 +51,8 @@ void Can_Set_Buff_200(uint8_t CopyData [])
pCANMsg->Msg [ i ] = 0u;
}
}
switch(Check_Steps)
{
case 0:
VSpeed = 0;
break;
case 1:
VSpeed = 10;
break;
case 2:
VSpeed = 19;
break;
case 3:
VSpeed = 29;
break;
case 4:
VSpeed = 38;
break;
case 5:
VSpeed = 47;
break;
case 6:
VSpeed = 57;
break;
case 7:
VSpeed = 75;
break;
case 8:
VSpeed = 88;
break;
case 9:
VSpeed = 88;
break;
case 10:
VSpeed = 88;
break;
case 11:
VSpeed = 88;
break;
}
pCANMsg->Sig.Vspeeed = VSpeed;
pCANMsg->Sig.Vspeeed = Vspeed;
}
void Can_Set_Buff_481(uint8_t CopyData [])
......@@ -134,60 +94,10 @@ void Can_Set_Buff_020(uint8_t CopyData [])
pCANMsg->Msg [ i ] = 0u;
}
}
switch(Check_Steps)
{
case 0:
pCANMsg->Sig.Eletricity_H = 0;
pCANMsg->Sig.Eletricity_L = 0;
break;
case 1:
pCANMsg->Sig.Eletricity_H = 0;
pCANMsg->Sig.Eletricity_L = 0;
break;
case 2:
pCANMsg->Sig.Eletricity_H = 0;
pCANMsg->Sig.Eletricity_L = 0x96;
break;
case 3:
pCANMsg->Sig.Eletricity_H = 0x01;
pCANMsg->Sig.Eletricity_L = 0x5E;
break;
case 4:
pCANMsg->Sig.Eletricity_H = 0x02;
pCANMsg->Sig.Eletricity_L = 0x26;
break;
case 5:
pCANMsg->Sig.Eletricity_H = 0x02;
pCANMsg->Sig.Eletricity_L = 0xEE;
break;
case 6:
pCANMsg->Sig.Eletricity_H = 0x03;
pCANMsg->Sig.Eletricity_L = 0xE8;
break;
case 7:
pCANMsg->Sig.Eletricity_H = 0x02;
pCANMsg->Sig.Eletricity_L = 0xEE;
break;
case 8:
pCANMsg->Sig.Eletricity_H = 0x02;
pCANMsg->Sig.Eletricity_L = 0x26;
break;
case 9:
pCANMsg->Sig.Eletricity_H = 0x01;
pCANMsg->Sig.Eletricity_L = 0x5E;
break;
case 10:
pCANMsg->Sig.Eletricity_H = 0;
pCANMsg->Sig.Eletricity_L = 0x96;
break;
case 11:
pCANMsg->Sig.Eletricity_H = 0x03;
pCANMsg->Sig.Eletricity_L = 0xE8;
break;
}
pCANMsg->Sig.Eletricity_H = Eletricity >> 8;
pCANMsg->Sig.Eletricity_L = Eletricity & 0xff;
}
void Can_Set_Buff_042(uint8_t CopyData [])
......
YueJin_test_bench/source/Appliciation/Display_Info.c
View file @ 7d6bd508
......@@ -2915,10 +2915,21 @@ uint32_t Get_Display_Type(void)
uint8_t Check_StepsAxis[2] ={250,240};;
uint8_t Check_VspeeedAxis[2] = {165,155};
uint16_t Clear_TFT_Time = 0;
uint16_t Version = 100;
void Display_PageNum(void)
{
Display_Num(200,20,Check_Steps,100);//步骤
Display_Num(200,20,Check_Steps,100);//步骤
Clear_TFT_Time+=100;
if(Clear_TFT_Time >= 1000)
{
Clear_TFT_Time = 0;
Display_TFT_Clear( );
Display_Num(200,20,Check_Steps,100);//步骤
Display_Num(20,280,Version,100);//步骤
}
}
uint16_t Display_Time = 0;
void Display_Num(uint16_t StartX, uint16_t StartY,uint16_t m_NUM,uint8_t CbkCycle)
......@@ -2931,7 +2942,7 @@ void Display_Num(uint16_t StartX, uint16_t StartY,uint16_t m_NUM,uint8_t CbkCycl
Num = m_NUM;
TempX = StartX;
Display_Time += CbkCycle;
Display_Time = 1000;
if(Display_Time >= 1000)
{
Display_Time = 0;
......@@ -2941,16 +2952,18 @@ void Display_Num(uint16_t StartX, uint16_t StartY,uint16_t m_NUM,uint8_t CbkCycl
}
//千位
Num = (uint16_t)((m_NUM / 1000u) % 10u);
TempX = StartX;
if((TempCount == 4)&&(Num > 0))
{
TempX = TempX-10;
TempX = TempX-30;
TFT_LCD_Draw_Bmp(TempX, StartY, ( uint8_t * )FONT_TABLE_15 [ Num ]);
}
//百位
Num = (uint16_t)((m_NUM / 100u) % 10u);
TempX = StartX;
if(TempCount == 4)
{
TempX = TempX-10;
TempX = TempX-20;
TFT_LCD_Draw_Bmp(TempX, StartY, ( uint8_t * )FONT_TABLE_15 [ Num ]);
}
......@@ -2958,12 +2971,13 @@ void Display_Num(uint16_t StartX, uint16_t StartY,uint16_t m_NUM,uint8_t CbkCycl
{
if((TempCount == 3)&&(Num>0))
{
TempX = TempX-10;
TempX = TempX-20;
TFT_LCD_Draw_Bmp(TempX, StartY, ( uint8_t * )FONT_TABLE_15 [ Num ]);
}
}
//十位
Num = (uint16_t)((m_NUM / 10u) % 10u);
TempX = StartX;
if(TempCount > 2)
{
TempX = TempX-10;
......
YueJin_test_bench/source/Appliciation/Key.h
View file @ 7d6bd508
......@@ -3,7 +3,7 @@
#include "TYW_stdint.h"
#define Check_KeepTime 1000 //每个步骤保持时间
#define Check_KeepTime 3000 //每个步骤保持时间
#define Check_Couont 11 //多少个步骤
......@@ -87,7 +87,7 @@ extern Key_Set_en_t Key_Parameter_Set_Long_Press_Time(uint16_t u16Time);
extern Key_Set_en_t Key_Parameter_Set_Super_Long_Press_Time(uint32_t u32Time);
extern uint8_t Check_Steps;
extern void User_CheckMode_Service(uint8_t CbkCycle);
extern void User_CanSend(uint8_t steps);
extern uint8_t Vspeed;
extern uint8_t Signal_4G;
......
YueJin_test_bench/source/Appliciation/Key_user.c
View file @ 7d6bd508
......@@ -8,12 +8,34 @@
uint8_t Check_Steps = 0;
uint8_t Check_Control_Mode = 2;// 1 自走模式 2 打点模式 0 默认都发0
uint8_t Check_Control_Time = 0;
uint16_t Check_Control_Time = 0;
uint8_t Vspeed = 0;
uint8_t Signal_4G = 0;
uint8_t Signal_GPS = 0;
uint16_t Eletricity = 0;
uint8_t Hour = 0;
uint8_t Tcs = 0;
uint8_t Energy_recovery = 0;
uint8_t Gear = 0;
uint8_t Ready = 0;
uint8_t Cruiste = 0;
uint8_t Fault = 0;
uint8_t Motor_hert = 0;
uint8_t Battery_temp = 0;
void Key_Operation_SW1(Key_Event_en_t enKeyEvent)
{
/*清零ODO*/
if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
{
if(POWER_CTRL_KL15 == 1)
{
POWER_CTRL_KL15 = 0;
}
else
{
POWER_CTRL_KL15 = 1;
}
}
else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
{
......@@ -309,7 +331,7 @@ Key_Real_Status_en_t Key_Real_sw10(void)
void User_CheckMode_Service(uint8_t CbkCycle)
{
if(Check_Control_Mode == 2)
if(Check_Control_Mode == 1)
{
Check_Control_Time += CbkCycle;
......@@ -323,23 +345,8 @@ void User_CheckMode_Service(uint8_t CbkCycle)
Check_Steps = 0;
}
}
}
uint8_t Vspeed = 0;
uint8_t Signal_4G = 0;
uint8_t Signal_GPS = 0;
uint16_t Eletricity = 0;
uint8_t Hour = 0;
uint8_t Tcs = 0;
uint8_t Energy_recovery = 0;
uint8_t Gear = 0;
uint8_t Ready = 0;
uint8_t Cruiste = 0;
uint8_t Fault = 0;
uint8_t Motor_hert = 0;
uint8_t Battery_temp = 0;
void User_CanSend(void)
{
switch(Check_Steps)
{
......@@ -357,7 +364,11 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 1:
Vspeed = 10;
Signal_4G = 0;
......@@ -372,12 +383,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 1;
Right_Led = 1;
Headlights_Led = 0;
break;
case 2:
Vspeed = 19;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 15;
Eletricity = 150;
Hour = 4;
Tcs = 0;
Energy_recovery = 0;
......@@ -387,12 +401,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 1;
break;
case 3:
Vspeed = 29;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 35;
Eletricity = 350;
Hour = 6;
Tcs = 0;
Energy_recovery = 0;
......@@ -402,12 +419,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 1;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 4:
Vspeed = 38;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 55;
Eletricity = 550;
Hour = 8;
Tcs = 0;
Energy_recovery = 0;
......@@ -417,12 +437,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 5:
Vspeed = 47;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 75;
Eletricity = 750;
Hour = 10;
Tcs = 0;
Energy_recovery = 2;
......@@ -432,12 +455,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 6:
Vspeed = 57;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 100;
Eletricity = 1000;
Hour = 12;
Tcs = 2;
Energy_recovery = 1;
......@@ -447,12 +473,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 7:
Vspeed = 75;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 75;
Eletricity = 750;
Hour = 14;
Tcs = 0;
Energy_recovery = 3;
......@@ -462,12 +491,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 8:
Vspeed = 88;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 55;
Eletricity = 550;
Hour = 16;
Tcs = 0;
Energy_recovery = 0;
......@@ -477,12 +509,15 @@ void User_CanSend(void)
Fault = 1;
Motor_hert = 1;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 9:
Vspeed = 88;
Signal_4G = 0;
Signal_GPS = 65;
Eletricity = 35;
Eletricity = 350;
Hour = 18;
Tcs = 0;
Energy_recovery = 0;
......@@ -492,12 +527,15 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 10:
Vspeed = 88;
Signal_4G = 65;
Signal_GPS = 0;
Eletricity = 15;
Eletricity = 150;
Hour = 20;
Tcs = 0;
Energy_recovery = 0;
......@@ -507,25 +545,36 @@ void User_CanSend(void)
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Left_Led = 0;
Right_Led = 0;
Headlights_Led = 0;
break;
case 11:
Vspeed = 88;
Signal_4G = 0;
Signal_GPS = 0;
Eletricity = 100;
Hour = 0;
Signal_4G = 65;
Signal_GPS = 65;
Eletricity = 1000;
Hour = 1;
Tcs = 1;
Energy_recovery = 0;
Gear = 0;
Ready = 0;
Cruiste = 0;
Fault = 0;
Motor_hert = 0;
Battery_temp = 0;
Energy_recovery = 1;
Gear = 1;
Ready = 3;
Cruiste = 1;
Fault = 1;
Motor_hert = 1;
Battery_temp = 1;
Left_Led = 1;
Right_Led = 1;
Headlights_Led = 1;
break;
}
}
void User_CanSend(uint8_t steps)
{
}
/*---------------------------------------------------------------------------------------*/
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.c
View file @ 7d6bd508
......@@ -156,6 +156,28 @@ void RTE_GPIO_Init(void)
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_AP0;//左转
gpio_temp.enGPIOPIN = GPIO_PIN_15;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_10;//右转
gpio_temp.enGPIOPIN = GPIO_PIN_14;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
gpio_temp.enGPIOPort = GPIO_PORT_GROUP_10;//远光灯
gpio_temp.enGPIOPIN = GPIO_PIN_13;
gpio_temp.enGPIOMode = GPIO_MODE_PORT;
gpio_temp.enGPIODir = GPIO_DIR_OUT;
gpio_temp.enGPIOAltFun = GPIO_ALTER_FUN_1;
GPIO_Config(&gpio_temp);
//GPIO_OUT_PORT10_PIN13 = 1;
queren = 0;
LINE_OUT_POS_06 = 0;
......
YueJin_test_bench/source/Appliciation/RTE_GPIO.h
View file @ 7d6bd508
......@@ -46,10 +46,13 @@
#define LINE_OUT_EPS GPIO_OUT_PORT10_PIN06
#define Light_Out GPIO_IN_PORT10_PIN09
#define Left_Led GPIO_OUT_APORT00_PIN15//左
#define Right_Led GPIO_OUT_PORT10_PIN14//右
#define Headlights_Led GPIO_OUT_PORT10_PIN13 //远光
#define POWER_CTRL_KL30 GPIO_OUT_PORT09_PIN05
#define POWER_CTRL_KL30_B GPIO_OUT_PORT09_PIN04
#define POWER_CTRL_KL30_B GPIO_OUT_PORT09_PIN04
#define POWER_CTRL_KL15 GPIO_OUT_PORT09_PIN06
......
YueJin_test_bench/source/Appliciation/Task.c
View file @ 7d6bd508
......@@ -117,14 +117,37 @@ uint8_t showtime = 0;
uint8_t bleuarttime = 0;
uint16_t time5s = 0;
uint16_t IGFLAG = 0;
uint16_t testtime = 0;
void Sys_Run_Mode_100ms_Tasks_Group(void)
{
Display_PageNum();
Display_Send_Vspead();
User_CheckMode_Service(100u);
//TFT_LCD_Draw_Bmp(3, 40, ( uint8_t * )gImage_Dsy_words_1X6_Y16);
POWER_CTRL_KL30 = 1;
POWER_CTRL_KL30_B = 1;
POWER_CTRL_KL15 = 1;
testtime++;
// if((testtime > 0)&&(testtime < 20))
// {
// Left_Led = 1;
// Right_Led = 1;
// Headlights_Led = 1;
// }
// else
// {
// Left_Led = 0;
// Right_Led = 0;
// Headlights_Led = 0;
// }
// if(testtime > 40)
// {
// testtime = 0;
// }
}
/*=================================================================*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment