✨ feat:修改打点模式指示灯

YueJin_test_bench/source/Appliciation/CAN_APP.c

@@ -739,6 +739,31 @@ void  Can_Set_Buff_207(uint8_t CopyData [])
     }
 }
 
+void  Can_Set_Buff_206(uint8_t CopyData [])
+{
+    uint8_t i = 0u;
+    uint32_t wtemp = 0u;
+    CANMsg206Union *pCANMsg;
+
+    pCANMsg = (CANMsg206Union *)CopyData;
+    
+    if ( pCANMsg != ( void * )0 )
+    {
+        for ( i = 0u; i < 8u; i++ )
+        {
+            pCANMsg->Msg [ i ] = 0u;
+        }
+    }
+    if(Fault == 1)
+    {
+        pCANMsg->Sig.worryz = 1;
+    }
+    else
+    {
+        pCANMsg->Sig.worryz = 0;
+    }
+}
+
 void CAN_Msg_Steps_100ms()
 {
     if(Student_Card_can_command==1)

YueJin_test_bench/source/Appliciation/CAN_APP.h

@@ -261,6 +261,25 @@ typedef union
 
     } Sig;
 } CANMsg207Union;
+
+typedef union
+{
+    uint8_t Msg [ 8 ];
+    struct
+    {
+        uint64_t                :8;
+        uint64_t                :8;
+        uint64_t                :5;
+        uint64_t                worryz:3;
+        uint64_t                :8;
+
+        uint64_t                :8;
+        uint64_t                :8;
+        uint64_t                :8;
+        uint64_t                :8;
+
+    } Sig;
+} CANMsg206Union;
 extern uint8_t UIDNumber[15];
 void CAN_MSG_COUNTER_PLUS(void);
 
@@ -279,7 +298,7 @@ void  Can_Set_Buff_021(uint8_t CopyData []);
 void  Can_Set_Buff_284(uint8_t CopyData []);
 void  Can_Set_Buff_786(uint8_t CopyData []);
 void  Can_Set_Buff_207(uint8_t CopyData []);
-
+void  Can_Set_Buff_206(uint8_t CopyData []);
 void CAN_Msg_Steps_100ms();
 extern void UID_ADD(void);
 extern uint8_t uidWrite;

YueJin_test_bench/source/Appliciation/CAN_Communication_Matrix.c

@@ -23,6 +23,7 @@ const st_CAN_SendAttribute    CAN_CH4_CANSendAttr[CAN_CH4_ID_SEND_TOTAL] =
     {0x284, 100ul*1000ul, 50ul, 0u, MSG_STD, RSCAN_CHANNEL_BUF_13, 8u, CAN_MSG_TX_CYCLE, Can_Set_Buff_284, (void *)0},//NFC
     {0x786, 100ul*1000ul, 55ul, 0u, MSG_STD, RSCAN_CHANNEL_BUF_14, 8u, CAN_MSG_TX_CYCLE, Can_Set_Buff_786, (void *)0},//诊断硬件软件版本号
     {0x207, 100ul*1000ul, 60ul, 0u, MSG_STD, RSCAN_CHANNEL_BUF_15, 8u, CAN_MSG_TX_CYCLE, Can_Set_Buff_207, (void *)0},//诊断
+    {0x206, 100ul*1000ul, 65ul, 0u, MSG_STD, RSCAN_CHANNEL_BUF_16, 8u, CAN_MSG_TX_CYCLE, Can_Set_Buff_206, (void *)0},//故障码
 };
 
 const st_CANMsgAttribute CAN_CH4_CAN_MSG_CONST_ARRAY[CAN_CH4_ID_TOTAL_MAX] =

YueJin_test_bench/source/Appliciation/CAN_Communication_Matrix.h

@@ -32,6 +32,7 @@ typedef enum
     CAN_CH4_ID_284,
     CAN_CH4_ID_786,
     CAN_CH4_ID_207,
+    CAN_CH4_ID_206,
     CAN_CH4_ID_SEND_TOTAL,
 } CAN_CH4_CAN_MSG_SEND_ID_t;
 

YueJin_test_bench/source/Appliciation/Display_Info.c

@@ -4773,6 +4773,8 @@ void Display_flag(uint8_t Check_Steps)
             TFT_LCD_Draw_Box(0, 0, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);//清除全亮
             TFT_LCD_Draw_Bmp(20, 50,  ( uint8_t * )gImage_jct_nenglianghuishouX0_Y0_);
             //TFT_LCD_Draw_Bmp(80, 40,  ( uint8_t * )gImage_gImage_BianchengX6_Y165);/*定速巡航*/ 
+            // uint8_t dingsuxunhang[14] = {100,105,110,103,115,117,120,117,110,104,97,110,103,0xff};
+            // General_Number_Disp(dingsuxunhang, 3, 100); //
             break;
         case 7://能源回收（琥珀） READY亮
             TFT_LCD_Draw_Box(0, 0, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);//清除全亮
@@ -4782,17 +4784,17 @@ void Display_flag(uint8_t Check_Steps)
         case 8://故障提示  电机过热 READY闪烁 
             TFT_LCD_Draw_Box(0, 0, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);//清除全亮        
             TFT_LCD_Draw_Bmp(20, 60,  ( uint8_t * )gImage_gImage_zcguzhang1X6_Y16);
-            TFT_LCD_Draw_Bmp(80, 50,  ( uint8_t * )gImage_dianchiguoreX0_Y0_);
+            TFT_LCD_Draw_Bmp(80, 50,  ( uint8_t * )gImage_jct_Motor_overheatingX0_Y0);
             TFT_LCD_Draw_Bmp(160, 65,  ( uint8_t * )gImage_gImage_READY1X6_Y16);
             break;
         case 9://蓝牙 GPS信号格数
             TFT_LCD_Draw_Box(0, 0, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);//清除全亮
-            TFT_LCD_Draw_Bmp(20, 50,  ( uint8_t * )gImage_gImage_bluetoothX6_Y165);
+            // TFT_LCD_Draw_Bmp(20, 50,  ( uint8_t * )gImage_gImage_bluetoothX6_Y165);
             TFT_LCD_Draw_Bmp(90, 50,  ( uint8_t * )gImage_jct_GPSX0_Y0_);
             break;
         case 10://蓝牙电话 4G网络格数
             TFT_LCD_Draw_Box(0, 0, 239, 319, TFT_LCD_FILL_FULL, TFT_LCD_TYPE_CLR);//清除全亮
-            TFT_LCD_Draw_Bmp(20, 50,  ( uint8_t * )gImage_phoneX0_Y0_);
+            // TFT_LCD_Draw_Bmp(20, 50,  ( uint8_t * )gImage_phoneX0_Y0_);
             TFT_LCD_Draw_Bmp(80, 50,  ( uint8_t * )gImage_4GX0_Y0_);
             break;  
         case 11://全亮
@@ -4806,7 +4808,7 @@ void Display_flag(uint8_t Check_Steps)
             TFT_LCD_Draw_Bmp(80, 80,  ( uint8_t * )gImage_icon_14X0_Y0);
             TFT_LCD_Draw_Bmp(140,80,  ( uint8_t * )gImage_jct_TCS_closeX0_Y0_);
 
-            TFT_LCD_Draw_Bmp(20, 120,  ( uint8_t * )gImage_dianchiguoreX0_Y0_);
+            TFT_LCD_Draw_Bmp(20, 120,  ( uint8_t * )gImage_jct_Motor_overheatingX0_Y0);
             TFT_LCD_Draw_Bmp(80, 120,  ( uint8_t * )gImage_gImage_ABSX6_Y165);
             TFT_LCD_Draw_Bmp(140,120,  ( uint8_t * )gImage_CHONGDIAN_X0_Y0_);
 
@@ -4816,10 +4818,10 @@ void Display_flag(uint8_t Check_Steps)
 
             TFT_LCD_Draw_Bmp(20, 210,  ( uint8_t * )gImage_gImage_zcguzhang1X6_Y16);
             TFT_LCD_Draw_Bmp(80,200,  ( uint8_t * )gImage_dianchiguoreX0_Y0_);
-            TFT_LCD_Draw_Bmp(140, 200,  ( uint8_t * )gImage_gImage_bluetoothX6_Y165);
+            // TFT_LCD_Draw_Bmp(140, 200,  ( uint8_t * )gImage_gImage_bluetoothX6_Y165);
 
             TFT_LCD_Draw_Bmp(20,240,  ( uint8_t * )gImage_jct_GPSX0_Y0_);
-            TFT_LCD_Draw_Bmp(80, 240,  ( uint8_t * )gImage_phoneX0_Y0_);
+            // TFT_LCD_Draw_Bmp(80, 240,  ( uint8_t * )gImage_phoneX0_Y0_);
             TFT_LCD_Draw_Bmp(140, 240,  ( uint8_t * )gImage_4GX0_Y0_);
         break;
         default:

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -506,7 +506,7 @@ void User_CheckMode_Service(uint8_t CbkCycle)
         LINE_OUT_NEG_05 = 1;
         NFC_C_card = 0;
         Side_bracket = 0;
-        
+        Charging_connection_led=0;
         break;
 
         case 1:
@@ -750,6 +750,7 @@ void User_CheckMode_Service(uint8_t CbkCycle)
         Side_bracket = 1;
         Hill_Descent_control = 1;
         bluetooth_phone = 0 ;
+        Charging_connection_led=1;
         break;
     }
 }