✨ feat:完成UUID上电读取

YueJin_test_bench/source/Appliciation/Barcode_Scanner.c

@@ -35,7 +35,7 @@ uint8_t timenum = 0;
 uint8_t firstflag = 0;
 uint8_t RS485_data[64];
 uint8_t checknumwrong = 3;
-uint8_t zhenduanflag = 0;
+uint8_t zhenduanflag = 1;
 uint8_t clearOdoFlag = 0;
 uint8_t connectbleFlag = 0;
 uint8_t Auto_ONOFF = 0;

YueJin_test_bench/source/Appliciation/Check_Ctrl.c

@@ -185,6 +185,18 @@ void CHECK_IPK_COUNT(void)
 // 0x11223344 不在线
 // 0x55667788 在线
 
+uint8_t Datajudgment(void)
+{
+    for(int i = 0; i<34; i++)
+    {
+        if(erweima[i] != uidread[i])
+        {
+            return 0;
+        }
+    }
+    return 1;
+}
+
 uint32_t Get_IPK_Status(void)
 {
     return NO_IPK_EXIST_Status;
@@ -211,6 +223,9 @@ extern uint8_t BCM_FLAG_2014 = 0;
 
     uint32_t loc_Type = 0;
     uint8_t erweima[64] ;
+    uint8_t UUIDbegin;
+    uint8_t uuidlock = 1;
+    uint16_t UUIDAccumulate;
 void Total_Check(void)
 {
 uint8_t cmperweima[34];
@@ -252,7 +267,34 @@ uint8_t yibiaoshuju[34];
                 TFT_LCD_Draw_Bmp(200,   90+40,  ( uint8_t * )gImage_cuo12 );
             }
 
+            if(uuidlock == 1)
+            {
+                for(int i = 0; i < 32; i++)
+                {
+                    UUIDAccumulate += uidread[i];
+                }
+                if(UUIDAccumulate != 0)
+                {
+                    UUIDbegin = 1;
+                }
+            }
+            else
+            {
+                uidread[32] = 0xFF;
+                General_Number_Disp(uidread, 3, 180);
+            }
+            
+            if(UUIDbegin == 1)
+            {
+                if(Datajudgment())
+                {
+                    UUIDbegin = 0;
+                    uuidlock = 0;
+                    zhenduanflag = 0;
+                }
+                uidread[32] = 0xFF;
                 General_Number_Disp(uidread, 3, 180);
+            }  
             break;
 
         case 1: 

YueJin_test_bench/source/Appliciation/Check_Ctrl.h

@@ -45,6 +45,7 @@ extern unsigned char KEYBUFFER [ 4 ];
 extern unsigned int  CAN_Msg_Tx_Enable;
 extern uint8_t       loc_Type_back;
 extern uint8_t       LED_Waring ;
+extern uint8_t uuidlock;
 extern uint8_t erweima[64];
 void         SET_IPK_NONE(void);
 void         Clear_IPK_NONE(void);

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -17,7 +17,7 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
     {
         if(uuidmodel == 0)
         {
-            if(firstpowerflag == 2)
+            if((firstpowerflag == 2) && (uuidlock == 0))
             {
                 MENU_CHECK_STEP_ADD( );   
             }
@@ -178,10 +178,12 @@ void Key_Operation_SW8(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
-        if(firstpowerflag == 2)
+        if((firstpowerflag == 2) && (uuidlock == 0))
         {
              if(zhenduanflag  != 1)
             {
+                memset(erweima, 0x00, 32);
+                memset(barcode_Msg, 0x00, 32);
                 zhenduanflag = 1;
             }
             else
@@ -291,7 +293,7 @@ void Key_Operation_SW1(Key_Event_en_t enKeyEvent)
         /*清零ODO*/
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
-        if(uuidmodel == 1)
+        if((uuidmodel == 1) && (uuidlock == 0))
         {
             Display_TFT_Clear_UID4();
             UUID_Write();

YueJin_test_bench/source/Appliciation/Task.c

@@ -124,8 +124,11 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
                             if(writeflag == 1 || writeflag ==3)
                             {
                                 // R485_Send_0x47();
+                                if(uuidlock == 0)
+                                {
                                     UUID_Write();
                                 }
+                            }
                             else
                             {
                                 ;

YueJin_test_bench/source/System/init.c

@@ -118,11 +118,11 @@ void Sys_Startup_Init(void)
     LINE_OUT_NEG_03 = 1;
     LINE_OUT_NEG_04 = 1; 
 
-    // Display_TFT_Clear();
-    // GUI_Display_Version_Code_Service(25, 20, "Please   Scan   The   Code ", Letter_Num_11, PCodeText_Space_size);
-
-    /*上电扫码校验功能如果需要扫码校验注释掉firstpowerflag = 2，打开上面两行的注释即可*/
     firstpowerflag = 2;
+
+    /*上电扫码校验功能屏蔽下面此条*/
+    uuidlock = 0;
+    zhenduanflag = 0;
 }
 
 /***********************************************************************