✨ feat:老化架程序

YueJin_test_bench/source/Appliciation/Check_Ctrl.c

@@ -73,17 +73,13 @@ void MENU_CHECK_STEP_ADD(void)
 {
     MENU_CHECK_STEP++;
 
-    if(MENU_CHECK_STEP > 14)
+    if(MENU_CHECK_STEP > 9)
     {
         MENU_CHECK_STEP = 0;
     }
-    // if((guangganflag == 2 || guangganflag == 1 ) && guangganflag != 3)
-    // {
-    //     MENU_CHECK_STEP = 3;
-    // }
-    if(CurrentWrong == 1)
+    if(MENU_CHECK_STEP == 1)
     {
-        MENU_CHECK_STEP = 1;
+        MENU_CHECK_STEP = 2;
     }
 }
 void MENU_CHECK_STEP_SUB(void)

YueJin_test_bench/source/Appliciation/Display_Info.c

@@ -4584,48 +4584,48 @@ void HW_Static_Current_Check(uint32_t cmd)
         // }
     }
 }
-uint8_t CurrentWrong = 1;
+uint8_t CurrentWrong = 0;
 void Get_static_Current(void)
 {
-    static uint32_t loc_Timer     = 0;
-    static uint32_t loc_ret       = 0; 
-    if(MENU_CHECK_STEP == 1)
-    {
-        loc_Current_0 = ADC_Read_Signal(ADC_CH_KL15_VOLTAGE);
-        loc_ret += loc_Current_0;
-        loc_Timer++;
+    // static uint32_t loc_Timer     = 0;
+    // static uint32_t loc_ret       = 0; 
+    // if(MENU_CHECK_STEP == 1)
+    // {
+    //     loc_Current_0 = ADC_Read_Signal(ADC_CH_KL15_VOLTAGE);
+    //     loc_ret += loc_Current_0;
+    //     loc_Timer++;
         
-        if ( loc_Timer >= Sampling_NUM )
-        {
-            loc_Timer = 0;
-            loc_ret /= Sampling_NUM;
-
-            // loc_ret *= 1000;//单位0.001毫伏
-            // loc_ret /= 100;//转化为电流，单位0.001毫安
-            loc_ret /= 10;//单位0.1毫安
-            loc_ret1 = loc_ret;
-        }
-        if(loc_ret1 != 0)
-        {
-            TFT_LCD_Draw_Bmp(190, 60, ( uint8_t * )gImage_Number_15_white_PiontX0_Y0);
-            GUI_General_Digit_Display(loc_ret1, Num_15, 3, 0, CurrentDigitNum09PosX, 60);
-            if(loc_ret1 >= 10)
-            {
-                MENU_CHECK_STEP = 1;
-                CurrentWrong = 1;
-            }
-            else
-            {
-                CurrentWrong = 0;
-            }
-            loc_ret1 = 0;
-        }
-        else
-        {
-            // MENU_CHECK_STEP = 1;
-            // CurrentWrong = 1;
-        }
-    }
+    //     if ( loc_Timer >= Sampling_NUM )
+    //     {
+    //         loc_Timer = 0;
+    //         loc_ret /= Sampling_NUM;
+
+    //         // loc_ret *= 1000;//单位0.001毫伏
+    //         // loc_ret /= 100;//转化为电流，单位0.001毫安
+    //         loc_ret /= 10;//单位0.1毫安
+    //         loc_ret1 = loc_ret;
+    //     }
+    //     if(loc_ret1 != 0)
+    //     {
+    //         TFT_LCD_Draw_Bmp(190, 60, ( uint8_t * )gImage_Number_15_white_PiontX0_Y0);
+    //         GUI_General_Digit_Display(loc_ret1, Num_15, 3, 0, CurrentDigitNum09PosX, 60);
+    //         if(loc_ret1 >= 10)
+    //         {
+    //             MENU_CHECK_STEP = 1;
+    //             CurrentWrong = 1;
+    //         }
+    //         else
+    //         {
+    //             CurrentWrong = 0;
+    //         }
+    //         loc_ret1 = 0;
+    //     }
+    //     else
+    //     {
+    //         // MENU_CHECK_STEP = 1;
+    //         // CurrentWrong = 1;
+    //     }
+    // }
 
 }
 const uint16_t  testNum[] = {200,190,180};
@@ -4902,7 +4902,7 @@ void Display_Version_Info(uint32_t ON_OFF)
         // TFT_LCD_Draw_Bmp(3,   160,  ( uint8_t * )gImage_Alarm_12_WordX6_Y165);  //24脚输出占空比
         // TFT_LCD_Draw_Bmp(210,   160,  ( uint8_t * )gImage_Alarm_13_ImageX222_Y166);  //%
         TFT_LCD_Draw_Bmp(3,   290,  ( uint8_t * )gImage_gImage_checkVX6_Y165 );      //检测台版本号
-        uint8_t mbuff [7] = {2,5,1,1,2,5,0xff};
+        uint8_t mbuff [7] = {2,5,1,1,2,7,0xff};
         General_Number_Disp(mbuff, 160, 290);  
 
     } 

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -19,10 +19,6 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)       //下一步
                 zhenduanflag = Data_Mode_Dot;
                 memset(erweima, 0, 64);
                 memset(barcode_Msg, 0, 64);
-                saomafinish = 4;
-            }
-            else if(saomafinish == 4)
-            {
                 MENU_CHECK_STEP_ADD( ); 
             }
         }

YueJin_test_bench/source/Appliciation/Task.c

@@ -105,6 +105,15 @@ void Sys_Run_Mode_50ms_Tasks_Group(void)
 /*==============================================================================
 100ms����ִ������ ��0��
 ------------------------------------------------------------------------------*/
+uint8_t MENU_CHECK_STEPLAST;
+void BluetoothAutoDisConnect(void)
+{
+    if((MENU_CHECK_STEPLAST == 8) && ((MENU_CHECK_STEP == 7) || (MENU_CHECK_STEP == 9)))
+    {
+        BlueTooth = 0;
+    }
+    MENU_CHECK_STEPLAST = MENU_CHECK_STEP;
+}
 uint16_t u16LJSText;
 uint32_t AutoTime = 160;
 uint32_t ONOFFtime = 450;
@@ -116,10 +125,11 @@ uint8_t querendelay = 0;
 void Sys_Run_Mode_100ms_Tasks_Group(void)
 {
     ProcessBluetoothDeviceNameWithLock();
-    AutoClearCounterAfterAllLit();
+    // AutoClearCounterAfterAllLit();
     TimeDelay_3s();
     PasswordUnlock();
     BTEnableDelayPowerReset();
+    BluetoothAutoDisConnect();
 
     static uint32_t loc_timer = 0;
     loc_timer++;

YueJin_test_bench/source/System/init.c

@@ -126,12 +126,12 @@ void Sys_Startup_Init(void)
 
     EN_5V_CUT_ENABLE = 1;
     
-    Display_TFT_Clear();
-    GUI_Display_Version_Code_Service(25, 20, "Please   Scan   The   Code ", Letter_Num_11, PCodeText_Space_size);
+    // Display_TFT_Clear();
+    // GUI_Display_Version_Code_Service(25, 20, "Please   Scan   The   Code ", Letter_Num_11, PCodeText_Space_size);
 
     /*上电扫码校验功能如果需要扫码校验注释掉firstpowerflag = 2，saomafinish = 3;打开上面两行的注释即可*/
-    // firstpowerflag = 2;
-    // saomafinish = 3;
+    firstpowerflag = 2;
+    saomafinish = 3;
 }
 
 /***********************************************************************