✨ feat:增加静态电流

YueJin_test_bench/source/Appliciation/Check_Ctrl.c

@@ -883,28 +883,8 @@ void Function_Check_Ctrl(uint32_t cmd)
             }
             case 10:
             {
-                // LINE_OUT_NEG_01 = 0;
-                // LINE_OUT_NEG_02 = 0;
-                // LINE_OUT_NEG_03 = 0;
-                // LINE_OUT_NEG_04 = 0;
-
-
-                // LINE_OUT_NEG_05 = 0;
-                // LINE_OUT_NEG_06 = 0;
-                // LINE_OUT_NEG_07 = 0;
-                // LINE_OUT_NEG_08 = 0;
-                // LINE_OUT_NEG_09 = 0;   
-                // LINE_OUT_NEG_10 = 0;
-                /*正控*/
-                // LINE_OUT_POS_01 = 1;
-                // LINE_OUT_POS_02 = 1;
-                // LINE_OUT_POS_04 = 1; 
-                // LINE_OUT_NEG_01 = 1;
-                // /*燃油*/
-                // FUEL_RES_1 = 1;     //1格
-                // FUEL_RES_2 = 0;
-                // FUEL_RES_3 = 0;
-                // FUEL_RES_4 = 0;
+                POWER_CTRL_KL30   = 0u;  //B+
+                POWER_CTRL_KL15   = 0u;  //KL15
                 break;
             }
         } 

YueJin_test_bench/source/Appliciation/Display_Info.c

@@ -2745,7 +2745,19 @@ const unsigned char gImage_Number_09_white_pointX0_Y0[]={/*Byte Size14*/
 
 
 
-
+//静态电流
+const unsigned char gImage_pic_06X0_Y0mA[]={/*Byte Size150*/
+74U,16U,
+0X00U,0X00U,0X44U,0X54U,0X54U,0X7fU,0X54U,0X44U,0X30U,0X28U,0X26U,0Xe4U,0X3cU,0X24U,0Xe0U,0X00U,
+0X00U,0X00U,0X08U,0X08U,0X08U,0X88U,0X88U,0X68U,0X9cU,0X0aU,0X38U,0X48U,0X88U,0X08U,0X08U,0X08U,
+0X08U,0X00U,0X00U,0XfcU,0X44U,0X44U,0X44U,0X44U,0XffU,0X44U,0X44U,0X44U,0X44U,0X44U,0XfcU,0X00U,
+0X00U,0X20U,0X42U,0X44U,0X88U,0X00U,0X48U,0X48U,0Xa8U,0X98U,0X4eU,0X48U,0X48U,0X68U,0Xc8U,0X08U,
+0X00U,0X00U,0X00U,0X00U,0X00U,0X00U,0X00U,0X30U,0X20U,0X00U,0X00U,0X00U,0X00U,0XffU,0X15U,0X15U,
+0X95U,0X7fU,0X01U,0X89U,0X89U,0X7fU,0X09U,0X09U,0X1fU,0X01U,0X00U,0X02U,0X31U,0X0dU,0X01U,0X3cU,
+0X40U,0X40U,0X44U,0X45U,0X49U,0X40U,0X40U,0X31U,0X05U,0X39U,0X02U,0X00U,0X00U,0X0fU,0X04U,0X04U,
+0X04U,0X04U,0X3fU,0X44U,0X44U,0X44U,0X44U,0X44U,0X47U,0X30U,0X00U,0X00U,0X60U,0X18U,0X04U,0X42U,
+0X30U,0X0eU,0X00U,0X00U,0X3eU,0X00U,0X00U,0X3eU,0X40U,0X30U,0X00U,0X00U,0X00U,0X00U,0X00U,0X00U,
+0X00U,0X30U,0X20U,0X00U,};
 const unsigned char gImage_Number_10_white3_0X0_Y0[]={/*Byte Size20*/
 9U,16U,
 0X00U,0Xe0U,0X18U,0X04U,0X04U,0X04U,0X18U,0Xe0U,0X00U,0X00U,0X07U,0X18U,0X20U,0X20U,0X20U,0X18U,
@@ -4794,12 +4806,14 @@ void HW_Static_Current_Check(uint32_t cmd)
 }
 uint8_t CurrentWrong = 0;
 uint16_t CurrentWrongfks = 0;
+uint8_t loc_ret1_display[3];
+uint8_t loc_ret1_display1[3];
 void Get_static_Current(void)
 {
     static uint32_t loc_Timer     = 0;
     static uint32_t loc_ret       = 0; 
     CurrentWrongfks = ADC_Read_Signal(ADC_CH_KL30_VOLTAGE);
-    if(MENU_CHECK_STEP == 14)
+    if(MENU_CHECK_STEP == 10)
     {
         loc_Current_0 = ADC_Read_Signal(ADC_CH_KL15_VOLTAGE);
         loc_ret += loc_Current_0;
@@ -4812,13 +4826,28 @@ void Get_static_Current(void)
 
             // loc_ret *= 1000;//单位0.001毫伏
             // loc_ret /= 100;//转化为电流，单位0.001毫安
-            loc_ret /= 10;//单位0.1毫安
+            // loc_ret /= 10;//单位为毫安
             loc_ret1 = loc_ret;
         }
         if(loc_ret1 != 0)
         {
-            TFT_LCD_Draw_Bmp(190, 60, ( uint8_t * )gImage_Number_15_white_PiontX0_Y0);
-            GUI_General_Digit_Display(loc_ret1, Num_15, 3, 0, CurrentDigitNum09PosX, 60);
+            TFT_LCD_Draw_Bmp(3, 60, ( uint8_t * )gImage_pic_06X0_Y0mA);
+            // GUI_General_Digit_Display(loc_ret1, Num_15, 3, 0, CurrentDigitNum09PosX, 60);
+            loc_ret1_display[0] = loc_ret1 / 1000;
+
+            // loc_ret1 = loc_ret1 / 100;
+            // loc_ret1 = loc_ret1 % 10;
+            loc_ret1_display[1] = loc_ret1 / 100 % 10;
+            loc_ret1_display[2] = 0XFF;
+
+            loc_ret1_display1[0] = loc_ret1 / 10 % 10;
+            loc_ret1_display1[1] = loc_ret1 % 10;
+            loc_ret1_display1[2] = 0xff;
+
+            General_Number_Disp_No_Conver(loc_ret1_display, 100, 60);
+            General_Number_Disp_No_Conver(loc_ret1_display1, 130, 60);
+            TFT_LCD_Draw_Bmp(120, 52, ( uint8_t * )FONT_TABLE [ 37 ]);
+
             // if(loc_ret1 > 10)
             // {
             //     MENU_CHECK_STEP = 14;
@@ -4832,7 +4861,7 @@ void Get_static_Current(void)
         }
         else
         {
-            MENU_CHECK_STEP = 14;
+            MENU_CHECK_STEP = 10;
             // CurrentWrong = 1;
         }
     }