✨ feat:C928_720P0.6版本，完善版本号读取，帧率修改为70FPS

ghs/output/project.dep

@@ -20,8 +20,8 @@ output\project.out: ..\source\System\dr7f701684.ld \
  C:\ghs\comp_rh850\lib\rh850\libstartup.a \
  C:\ghs\comp_rh850\lib\rh850\libsys.a C:\ghs\comp_rh850\lib\rh850\libarch.a
 
-:cmdList=gmemfile output/project.out -o output/FX12_TFT_test.mem ; gsrec -e 0 -hex386 output/project.out -o output/FX12_TFT_test.hex ; gsrec -e 0 -noS5 output/project.out -o output/FX12_TFT_test.rec ; ccv850 $(FILETYPEOPTIONS) $(OBJECTS) -MD -I..\source\Driver\Clock -I..\source\Driver\RH850F1KM_S1 -I..\source\Driver\Timer -I..\source\Driver\TimerB -I..\source\Driver\Analog_Signals -I..\source\Driver\CAN -I..\source\Driver\GPIO -I..\source\System -I..\source\Appliciation -I..\source\FCL -I..\source\EEL -I..\source\eel_user -I..\source\fdl_user -I..\source\FDL -I..\source\EEL\lib -I..\source\FDL\lib -object_dir=.\obj -map -gsize -e _RESET -Mx -bsp generic -callgraph -dwarf2 -D__GHS__ -cpu=rh850g3kh -fhard -DPlatform_RH850 -DPlatform_32Bit -nothreshold -g --diag_suppress 1 --diag_suppress 9 --diag_suppress 177 --diag_suppress 550 --diag_suppress 188 -registermode=32 -data_bus_width=32 -Onone -japanese_automotive_c -top_project Z:\D\test\c928_test\ghs\c928_test.gpj -o output\project.out ; 
-:cmdHash=0x0c3d3c89
+:cmdList=gmemfile output/project.out -o output/FX12_TFT_test.mem ; gsrec -e 0 -hex386 output/project.out -o output/FX12_TFT_test.hex ; gsrec -e 0 -noS5 output/project.out -o output/FX12_TFT_test.rec ; ccv850 $(FILETYPEOPTIONS) $(OBJECTS) -MD -I..\source\Driver\Clock -I..\source\Driver\RH850F1KM_S1 -I..\source\Driver\Timer -I..\source\Driver\TimerB -I..\source\Driver\Analog_Signals -I..\source\Driver\CAN -I..\source\Driver\GPIO -I..\source\System -I..\source\Appliciation -I..\source\FCL -I..\source\EEL -I..\source\eel_user -I..\source\fdl_user -I..\source\FDL -I..\source\EEL\lib -I..\source\FDL\lib -object_dir=.\obj -map -gsize -e _RESET -Mx -bsp generic -callgraph -dwarf2 -D__GHS__ -cpu=rh850g3kh -fhard -DPlatform_RH850 -DPlatform_32Bit -nothreshold -g --diag_suppress 1 --diag_suppress 9 --diag_suppress 177 --diag_suppress 550 --diag_suppress 188 -registermode=32 -data_bus_width=32 -Onone -japanese_automotive_c -top_project Z:\D\װ\c928&G393\c928\ghs\c928_test.gpj -o output\project.out ; 
+:cmdHash=0xc11d1af5
 
 :objList=obj\RTE_PWM.o obj\RTE_WDT.o obj\Internal_EEPROM.o obj\RTE_Memory.o obj\Internal_FCL.o obj\Clock.o obj\WDT.o obj\rh850_macros.o obj\Sys_Tick.o obj\ADC.o obj\Analog_Circuits.o obj\Analog_Signals.o obj\TimerB.o obj\RSCAN_Table.o obj\RSCAN.o obj\GPIO.o obj\UART.o obj\RIIC.o obj\Simulated_8080.o obj\TFT_LCD.o obj\TM035HFZGZx.o obj\r_clkc.o obj\fcl_ctrl.o ..\source\System\dr7f701684.ld obj\init.o obj\interrupts.o obj\main.o obj\dr7f701684_startup.o obj\r_fcl_hw_access_asm.o obj\r_fcl_hw_access.o obj\r_fcl_user_if.o obj\fcl_descriptor.o obj\fcl_user.o obj\fdl_descriptor.o obj\fdl_user.o obj\r_fdl_hw_access.o obj\r_fdl_user_if.o obj\r_fdl_user_if_init.o obj\eel_descriptor.o obj\eelapp_control.o obj\r_eel_basic_fct.o obj\r_eel_user_if.o obj\BSP.o obj\TimeStamp.o obj\RH850_OTA.o obj\fx12_test.o obj\Display_Info.o ; 
 :objHash=0x839e93ac

ghs/output/project.siz

 output\project.out  .intvect                    1944
-output\project.out  .rodata                    18445
-output\project.out  .text                      78814
+output\project.out  .rodata                    19925
+output\project.out  .text                      80654
 output\project.out  .R_FCL_CODE_ROM              894
 output\project.out  .R_FCL_CONST                  19
 output\project.out  .R_FCL_CODE_USR              246
@@ -13,4 +13,4 @@ output\project.out  .R_EEL_Text                18394
 output\project.out  .R_EEL_Const                  43
 output\project.out  .secinfo                     120
 output\project.out  .syscall                       6
-output\project.out  .romdata                     385
+output\project.out  .romdata                     469

source/Driver/RIIC/RIIC.c

 #include "RIIC.h"
 #include "dr7f701684.dvf.h"
 #include "rh850_macros.h"
-#define RIIC_WAIT_MAX 0XFFFFF0UL
+#define RIIC_WAIT_MAX 0X0FFFFUL
 #define RIIC_GPIO_PROTECTED_WRITE(preg, pstatus, reg, value) \
 	do                                                       \
 	{                                                        \

source/touch_screen/BSP/BSP.c

@@ -308,6 +308,26 @@ void Clear_TOUCH_IRQHandler_flag(void)
 {
     TOUCH_IRQHandler_flag = 0;
 }
+void AIM951_i2c_send_check(uint8_t addr, uint8_t data)
+{
+    uint8_t write_count = 0;
+    uint8_t receive_data = 0;
+    while(write_count < 3)
+    {
+        write_count ++;
+        AIM951_i2c_send(addr,data);
+        AIM951_i2c_sendreceive(addr,&receive_data);
+        if(receive_data == data)
+        {
+            write_count = 0;
+            break;
+        }
+    }
+    if(write_count == 3)
+    {
+        software_reset();
+    }
+}
 
 void AIM951_i2c_send(uint8_t addr, uint8_t data)
 {
@@ -332,96 +352,97 @@ void switch_951_init(uint8_t work_mode)
 {
     if (work_mode == 0)
     {
-        AIM951_i2c_send(0xFF, 0x00);
-        AIM951_i2c_send(0x08, 0xAC);
-        AIM951_i2c_send(0x68, 0x02);
-        AIM951_i2c_send(0x04, 0x70);
-        AIM951_i2c_send(0xFF, 0x05);
-        AIM951_i2c_send(0x1B, 0x00);
-        AIM951_i2c_send(0x1F, 0x08);
-        AIM951_i2c_send(0xFF, 0x08);
-        AIM951_i2c_send(0x88, 0x1F);
-        AIM951_i2c_send(0xFF, 0x04);
-        AIM951_i2c_send(0x03, 0x50);
-        AIM951_i2c_send(0xFF, 0x03);
-        AIM951_i2c_send(0x03, 0x50);
+        //AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF,0x00);
+        AIM951_i2c_send_check(0x08, 0xAC);
+        AIM951_i2c_send_check(0x68, 0x02);
+        AIM951_i2c_send_check(0x04, 0x70);
+        AIM951_i2c_send_check(0xFF, 0x05);
+        AIM951_i2c_send_check(0x1B, 0x00);
+        AIM951_i2c_send_check(0x1F, 0x08);
+        AIM951_i2c_send_check(0xFF, 0x08);
+        AIM951_i2c_send_check(0x88, 0x1F);
+        AIM951_i2c_send_check(0xFF, 0x04);
+        AIM951_i2c_send_check(0x03, 0x50);
+        AIM951_i2c_send_check(0xFF, 0x03);
+        AIM951_i2c_send_check(0x03, 0x50);
         // 1112
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x44, 0x0A);
+        AIM951_i2c_send_check(0x44, 0x0A);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x50, 0xC0);
+        AIM951_i2c_send_check(0x50, 0xC0);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x51, 0x30);
+        AIM951_i2c_send_check(0x51, 0x30);
         BSP_Delay_ms(10); 
-        AIM951_i2c_send(0x3B, 0x4C);
+        AIM951_i2c_send_check(0x3B, 0x4C);
         BSP_Delay_ms(10);
 
         // 951 iic mapping
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0E, 0x34);
+        AIM951_i2c_send_check(0x0E, 0x34);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x16, 0x34);
+        AIM951_i2c_send_check(0x16, 0x34);
         BSP_Delay_ms(10);
 
         // INTB init
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x93, 0x10);
+        AIM951_i2c_send_check(0x93, 0x10);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x5C, 0x21);
+        AIM951_i2c_send_check(0x5C, 0x21);
         BSP_Delay_ms(10);
         // 951 init end
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x04, 0x50);
+        AIM951_i2c_send_check(0x04, 0x50);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x3B, 0xCC);
+        AIM951_i2c_send_check(0x3B, 0xCC);
 
         BSP_Delay_ms(10);
         // 951 patternGen 1920*720P60 1222 mode
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x5F, 0x60);
+        AIM951_i2c_send_check(0x5F, 0x60);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x84, 0x14);
+        AIM951_i2c_send_check(0x84, 0x11);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x8C, 0x01);
+        AIM951_i2c_send_check(0x8C, 0x01);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x47, 0x4F);
+        AIM951_i2c_send_check(0x47, 0x4F);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0xFF, 0x01);
+        AIM951_i2c_send_check(0xFF, 0x01);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x07, 0x10);
+        AIM951_i2c_send_check(0x07, 0x10);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x08, 0xF8);
+        AIM951_i2c_send_check(0x08, 0xF8);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x09, 0x82);
+        AIM951_i2c_send_check(0x09, 0x82);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0A, 0x80);
+        AIM951_i2c_send_check(0x0A, 0x80);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0B, 0xD0);
+        AIM951_i2c_send_check(0x0B, 0xD0);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0C, 0x72);
+        AIM951_i2c_send_check(0x0C, 0x72);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0D, 0x28);
+        AIM951_i2c_send_check(0x0D, 0x24);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0E, 0x0A);
+        AIM951_i2c_send_check(0x0E, 0x18);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x0F, 0x28);
+        AIM951_i2c_send_check(0x0F, 0x36);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x10, 0x0A);
+        AIM951_i2c_send_check(0x10, 0x08);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x11, 0x03);
+        AIM951_i2c_send_check(0x11, 0x03);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x02, 0x44);
+        AIM951_i2c_send_check(0x02, 0x44);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x00, 0x05);
+        AIM951_i2c_send_check(0x00, 0x05);
 
-        AIM951_i2c_send(0xFF, 0x00);
+        AIM951_i2c_send_check(0xFF, 0x00);
         BSP_Delay_ms(10);
-        AIM951_i2c_send(0x31, 0x33);
+        AIM951_i2c_send_check(0x31, 0x33);
         BSP_Delay_ms(10);
 
         GPIO_OUT_PORT08_PIN12 = 1U;

source/touch_screen/BSP/BSP.h

@@ -104,6 +104,7 @@ void init_951(void);
 void switch_951_init(uint8_t work_mode);
 void switch_951_Color(uint8_t in);
 void AIM951_i2c_send(uint8_t addr, uint8_t data);
+void AIM951_i2c_send_check(uint8_t addr, uint8_t data);
 void AIM951_i2c_sendreceive(uint8_t sendreceive_addr,uint8_t *receive_data);
 void touch_IRQ_Enable(void);
 #endif  //  __BSP_H__

source/touch_screen/Display_Info/Display_Info.h

@@ -3,7 +3,7 @@
 
 extern const unsigned char gImage_BG_test[];//背景
 extern const unsigned char gImage_BG_test_A[];//背景
-extern const unsigned char *D[];               //D 指大号数字和A-F
+extern const unsigned char *D[];               //D 指大号数字和A-Z
 extern const unsigned char gImage_D_GX9_Y9[];//版本号的点
 extern const unsigned char *gImage_point_up[];//界面选择
 extern const unsigned char *gImage_point_right[];//仪表选择