✨ feat:上电扫码，如果不需要扫码初始化将firstpowerflag = 2

YueJin_test_bench/source/Appliciation/Barcode_Scanner.c

@@ -47,6 +47,7 @@ uint8_t powerstdio = 0;
 uint8_t get_num_buf[34];
 uint8_t comparestart;
 uint8_t blename[5];
+uint8_t firstpowerflag = 0;
 void get_key(void)
 {
     key_array[0] = seed_value[0] | seed_value[3];
@@ -410,6 +411,10 @@ void UART_Put1(uint32_t Value)
     // RS485_TX_finish = 0;
     // LINE_OUT_NEG_09 = 1;
     // RS485_TX_finish = 0;
+    if(firstpowerflag != 2)
+    {
+        firstpowerflag = 1;
+    }
     return;
 }
 void Recv_Byte(void)

YueJin_test_bench/source/Appliciation/Barcode_Scanner.h

@@ -33,4 +33,5 @@ extern uint8_t connectbleFlag;
 extern uint8_t get_num_buf[34];
 extern uint8_t blename[5];
 extern uint8_t recvflag111;
+extern uint8_t firstpowerflag;
 #endif
\ No newline at end of file

YueJin_test_bench/source/Appliciation/Key_user.c

@@ -9,22 +9,28 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
-        if ( (LED_Waring == 1) || (UDS_Warning_Voltage ==1))
-        {
-            ;
-        }
-        else
+        // if ( (LED_Waring == 1) || (UDS_Warning_Voltage ==1))
+        // {
+        //     ;
+        // }
+        // else
+        // {
+        //     Display_Add( );
+        //     Display_TFT_Clear( );  
+        // }  
+        if(firstpowerflag == 2)
         {
-            Display_Add( );
-            Display_TFT_Clear( );  
+            MENU_CHECK_STEP_ADD( );   
         }
               
-        MENU_CHECK_STEP_ADD( );     
+          
         
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
         
+        if(firstpowerflag == 2)
+        {
             if(AutoFlag == 1)
             {
                 AutoFlag = 0;
@@ -34,6 +40,7 @@ void Key_Operation_SW5(Key_Event_en_t enKeyEvent)
                 AutoFlag = 1;
             }
         }
+    }
     // else if ( enKeyEvent == KEY_EVENT_SUPER_LONG_PRESS )
     // {
     //     if ( (LED_Waring == 1) || (UDS_Warning_Voltage ==1))
@@ -65,8 +72,11 @@ void Key_Operation_SW4(Key_Event_en_t enKeyEvent)
         //     Display_Sub( );
         //     Display_TFT_Clear( );  
         // }  
+        if(firstpowerflag == 2)
+        {
             MENU_CHECK_STEP_SUB();
         }
+    }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
         
@@ -94,6 +104,8 @@ void Key_Operation_SW7(Key_Event_en_t enKeyEvent)
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
        
+        if(firstpowerflag == 2)
+        {    
             if(zhenduanflag != 2 && zhenduanflag != 3)
             {
                     zhenduanflag = 2;
@@ -103,6 +115,8 @@ void Key_Operation_SW7(Key_Event_en_t enKeyEvent)
                     zhenduanflag = 0;
             }
         }
+       
+    }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
     }
@@ -116,6 +130,8 @@ void Key_Operation_SW7(Key_Event_en_t enKeyEvent)
 void Key_Operation_SW8(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
+    {
+        if(firstpowerflag == 2)
         {
              if(zhenduanflag  != 1)
             {
@@ -133,6 +149,7 @@ void Key_Operation_SW8(Key_Event_en_t enKeyEvent)
 
             }
             RS485_TX_finish = 0;
+        }
         
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
@@ -148,6 +165,9 @@ void Key_Operation_SW8(Key_Event_en_t enKeyEvent)
 void Key_Operation_SW2(Key_Event_en_t enKeyEvent)
 {
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
+    {
+
+        if(firstpowerflag == 2)
         {
             if(LINE_OUT_NEG_01 == 1U)
             {
@@ -159,7 +179,7 @@ void Key_Operation_SW2(Key_Event_en_t enKeyEvent)
                 LINE_OUT_NEG_01 = 1U;
                 Auto_ONOFF == 0;
             }
-        
+        }
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
@@ -179,6 +199,8 @@ void Key_Operation_SW3(Key_Event_en_t enKeyEvent)
         // {
         //     MENU_CHECK_STEP_SUB( ); 
         // }
+        if(firstpowerflag == 2)
+        {
             if(clearOdoFlag == 0)
             {
                 clearOdoFlag = 1;
@@ -188,6 +210,7 @@ void Key_Operation_SW3(Key_Event_en_t enKeyEvent)
                 clearOdoFlag = 0;
             }
         }
+    }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
     }
@@ -206,6 +229,8 @@ void Key_Operation_SW1(Key_Event_en_t enKeyEvent)
 {
         /*清零ODO*/
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
+    {
+        if(firstpowerflag == 2)
         {
             if(Auto_ONOFF != 0)
             {
@@ -215,6 +240,7 @@ void Key_Operation_SW1(Key_Event_en_t enKeyEvent)
             {
                 Auto_ONOFF = 1;
             }
+        }
         
     }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
@@ -337,6 +363,9 @@ void Key_Operation_SW10(Key_Event_en_t enKeyEvent)
     if ( enKeyEvent == KEY_EVENT_SHORT_PRESS )
     {
         
+        if(firstpowerflag == 2)
+        {
+            Display_TFT_Clear();
             if(connectbleFlag == 0)
             {
                 connectbleFlag = 1;
@@ -345,7 +374,6 @@ void Key_Operation_SW10(Key_Event_en_t enKeyEvent)
             }
             else
             {
-            Display_TFT_Clear();
                 name1= (devicename) & 0xFF;
                 name2 = (devicename >> 8) & 0xFF;
                 startONfalg = 0;
@@ -355,6 +383,7 @@ void Key_Operation_SW10(Key_Event_en_t enKeyEvent)
                 startIGONtime = 0;
             }
         }
+    }
     else if ( enKeyEvent == KEY_EVENT_LONG_PRESS )
     {
     }

YueJin_test_bench/source/Appliciation/Task.c

@@ -36,6 +36,7 @@ uint32_t send0x42time = 0;
 uint32_t bleOFFtoONtime = 0;
 uint8_t startONfalg = 0;
 uint32_t startIGONtime = 0;
+uint8_t compareresult;
 const unsigned char gImage_cuo1[] = {24, 24,0X00,0X00,0X00,0X00,0X30,0X70,0XE0,0XC0,0X80,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X80,0XC0,0X70,0X30,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,0X83,0XC7,0X66,0X38,0X38,0X7C,0XE6,0XC3,0X81,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X0C,0X0C,0X06,0X03,0X01,0X00,0X00,0X00,0X00,0X00,0X00,0X01,0X03,0X07,0X0E,0X0C,0X00,0X00,0X00,0X00,};
 const unsigned char gImage_dui1[] = {24, 24,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X80,0XC0,0XE0,0X40,0X00,0X00,0X00,0X00,0X08,0X18,0X30,0X70,0XC0,0X80,0X00,0X00,0X80,0XC0,0XE0,0X70,0X38,0X1C,0X0E,0X07,0X03,0X01,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X01,0X03,0X07,0X03,0X01,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,};
 void Sys_Run_Mode_Pseudo_Real_Time_Tasks(void)
@@ -106,7 +107,8 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
     // UART_Ch0_Send_Multiple_Byte(testdata,3);
     
     // RS485_User_Tx_Data();
-    
+    if(firstpowerflag == 2)
+    {
         if(clearOdoFlag == 0)
         {
          backsend();
@@ -222,6 +224,8 @@ void Sys_Run_Mode_10ms_Tasks_Group(void)
                 queren = 1;
             }
         }
+    }
+   
 
 }
 
@@ -341,6 +345,8 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
     {
         RS485_send_time++;
     }
+    if(firstpowerflag == 2)
+    {
         if(AutoFlag == 1)
         {
             if(AutoTime <= 200)
@@ -443,7 +449,56 @@ void Sys_Run_Mode_100ms_Tasks_Group(void)
             recvflag111 = 0;
             
         }
+    }
+
+         if(firstpowerflag == 1)
+    {
+        zhenduanflag = 2;
+        Total_Check();
+        firstpowerflag = 2;
+        Display_TFT_Clear();
+        if(compareresult == 1 && comparestart == 0)
+        {
+        //     Total_Check();
             
+            if(compareresult == 1)
+            {
+                TFT_LCD_Draw_Bmp(200,   90+40,  ( uint8_t * )gImage_cuo1 );
+                // comparestart = 2;
+            }
+            else
+            {
+                TFT_LCD_Draw_Bmp(200,   90+40,  ( uint8_t * )gImage_dui1 );  
+                // comparestart = 2;
+            }
+            Total_Check();
+            firstpowerflag = 3;
+            // zhendlag = 5;
+        }
+         
+    }
+    else
+    {
+        if(compareresult == 1)
+        {
+            Total_Check();
+            firstpowerflag = 3;
+             zhenduanflag = 2;
+            if(compareresult == 1)
+            {
+                TFT_LCD_Draw_Bmp(200,   90+40,  ( uint8_t * )gImage_cuo1 );
+                // comparestart = 2;
+            }
+            else
+            {
+                TFT_LCD_Draw_Bmp(200,   90+40,  ( uint8_t * )gImage_dui1 );  
+                // comparestart = 2;
+            }
+            // Total_Check();
+            // zhenduanflag = 5;
+        }
+        // zhenduanflag = 2;
+    }   
     //u16LJSText = TFT_LCD_REQ_FIFO_MAX_DEPTH;
 }
 /*=================================================================*/

YueJin_test_bench/source/System/init.c

@@ -104,6 +104,12 @@ void Sys_Startup_Init(void)
     loc_config.pfnUARTErrHandleCallBack = 0;
     loc_config.pfnUARTReadMsgCallBack = UART_Put1;
     UART_Init(UART_RLIN31, &loc_config);
+    LINE_OUT_NEG_01 = 1;
+    LINE_OUT_NEG_02 = 1;
+    LINE_OUT_NEG_03 = 1;
+    LINE_OUT_NEG_04 = 1; 
+    Display_TFT_Clear();
+    GUI_Display_Version_Code_Service(25, 20, "Please   Scan   The   Code ", Letter_Num_11, PCodeText_Space_size);
 }
 
 /***********************************************************************