✨ feat(12):

知豆检测台/.gitignore

+/Test_Bench/bin
+/Test_Bench/General_HY64_Data

知豆检测台/.vscode/settings.json

+{
+    "files.encoding": "gbk",
+    "files.associations": {
+        "includes.h": "c",
+        "globals_var.h": "c"
+    }
+}
\ No newline at end of file

知豆检测台/README.md

+# CS08___test_bench
+
+小康CS08检测台
\ No newline at end of file

知豆检测台/Test_Bench/.vscode/settings.json

+{
+    "files.associations": {
+        "includes.h": "c",
+        "var_type.h": "c"
+    },
+    "files.encoding": "gbk"
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_ATD.c

+#define  GLOBALS_API_ATD
+#include "../App_Headers/includes.h"
+
+
+/*-------------------------------------------------------------------------
+* Function Name  : ATD_INIT
+* Description    : AD转化初始化
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void API_ATD_init(void)
+{
+    ///*
+    ATDCTL0 = null;
+    ATDCTL1_ETRIGSEL = Disable;
+    ATDCTL1_SRES     = True;     //10位精度
+    ATDCTL1_SMP_DIS  = Disable;  //
+    ATDCTL1_ETRIGCH  = 0;        //转化通道初始化
+                                
+    ATDCTL2_AFFC     = Disable;  //分别清除每一个 CCFX标志位用写1的方式
+    ATDCTL2_ICLKSTP  = Enable;   //使能停止模式
+    ATDCTL2_ETRIGE   = Disable;  //外部触发禁止
+    ATDCTL2_ASCIE    = Disable;  //禁止转化中断
+    ATDCTL2_ACMPIE   = Disable;  //禁止比较中断
+    
+    ATDCTL3_DJM      = Enable;   //右对齐
+    ATDCTL3_S1C      = 1;        //转化长度1
+    ATDCTL3_S2C      = 0;
+    ATDCTL3_S4C      = 0;
+    ATDCTL3_S8C      = 0;
+    ATDCTL3_FIFO     = Disable;  //不是FIFO模式 并且各自的结果放在各自的寄存器 ATDDRx
+    ATDCTL3_FRZ      = Disable;  //禁止冻结模式
+    
+    ATDCTL4_SMP      = SMP_TIME;  //采样时间 4 CYCLE
+    ATDCTL4_PRS      = SMP_PRE;   //
+    
+    ATDCTL5_SC       = Disable;
+    ATDCTL5_CA       = 0;
+    ATDCTL5_CB       = 0;
+    ATDCTL5_CC       = 0;
+    ATDCTL5_CD       = 0;
+    
+    ATDDIEN=0xfe;
+    ATDCTL5_SCAN     = Enable;   //连续转化
+    ATDCTL5_MULT     = 0;        //只有一个通道
+    //*/
+
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : API_GetSensorAD
+* Description    : 提取AD值
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void API_GetSensorAD(void)
+{
+    static INT16U  ad_data[10];
+    static INT8U   p = null;
+           INT8U   AD_STATUS;
+    AD_STATUS = ATDSTAT0;
+    if((AD_STATUS & 0x80) == 0x80)
+    {
+        ad_data[p] = ATDDR0;
+        p++;
+        if(p >2)
+        {
+           p = null;
+        }
+        APP_SortNByte(ad_data,3);
+        if(ad_data[1] > 200)  //2V = 7.7V
+        {
+            Curkeyinput = KeyON;
+        }
+        else
+        {
+            Curkeyinput = KeyOFF;
+            
+        }
+        ATDSTAT0_SCF = ClearFlag;
+    }    
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_CAN.c

+#define GLOBALS_API_CAN
+#include "../App_Headers/includes.h"
+
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_CAN_Init
+* Description    : CAN初始化
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void  Api_CAN_Init(void)
+{
+    INT16U b = null;
+    CANCTL0_INITRQ = Enable;                //准备初始化 
+    
+    while(!CANCTL1_INITAK);                 //等待进入初始化模式
+    
+    CANCTL1        = CANCTL1_CANE_MASK | CANCTL1_BORM_MASK;  
+    CANCTL1_WUPM   = Disable;               //所有显性唤醒
+    /*
+    SYNC_SEG + (PROP_SEG + PHASE_SEG1) + (PHASE_SEG2)
+    1 Tq         4--16  Tq                  2--8  Tq 
+    */ 
+  
+    CANBTR1_TSEG_10 = Seg1_5Tq;    //351page  75%  75<= sp<=83
+    CANBTR1_TSEG_20 = Seg2_2Tq;
+    CANBTR0_SJW     = SJW_1Tq;     //重新同步        
+    CANBTR1_SAMP    = SAMP_1;
+    CANBTR0_BRP     = 0x00;     //0 500K    1 250K
+    
+             
+    CANIDAC_IDAM   = IDAM_2_32Bit;
+    CANIDAC_IDHIT  = IDHIT0;                //滤波器 0 有效   
+         
+    CANIDAR0       = null;                  //
+    CANIDAR1       = null;
+    CANIDAR2       = null;
+    CANIDAR3       = null;
+    CANIDAR4       = null;
+    CANIDAR5       = null;
+    CANIDAR6       = null;
+    CANIDAR7       = null;   
+     
+    CANIDMR0       = 0xFF;
+    CANIDMR1       = 0xFF;
+    CANIDMR2       = 0xFF;
+    CANIDMR3       = 0xFF;
+    CANIDMR4       = 0xFF;
+    CANIDMR5       = 0xFF;
+    CANIDMR6       = 0xFF;
+    CANIDMR7       = 0xFF;
+    //
+    CANTIER = null;     
+    CANCTL0_INITRQ = Disable;               //完成初始化
+    while(CANCTL1_INITAK);                  //等待确认
+
+    CANRFLG_RXF = ClearFlag;     
+    CANRIER_RXFIE = Enable;                 //使能接收中断
+    CANTIER_TXEIE = Disable;                //禁止发送中断 
+    
+    CANCTL0_TIME   = Enable;                //使能时间戳  
+    CANCTL0_CSWAI  = WaitRun;               //等待模式下可以运行    
+    CANCTL0_WUPE = Enable; 
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : GET_STAND_ID
+* Description    : 提取标准ID
+* Input          : IDR0_Add          -> 对应的IDR0的地址
+* Output         : None
+* Return         : dwPGN
+* onther         : 
+--------------------------------------------------------------------------*/
+INT16U    Api_GET_STAND_ID(INT8U *IDR0_Add)
+{
+    INT16U    dwPGN;
+    INT8U     *bp;
+    
+    bp = (INT8U*)&dwPGN;
+    
+    *(bp    ) = *(IDR0_Add    ); 
+    *(bp + 1) = *(IDR0_Add + 1); 
+
+
+    dwPGN = dwPGN>>5;
+
+    return(dwPGN);                 
+}
+
+INT32U  bsp_GET_EXTEND_ID(INT8U *IDR0_Add)
+{
+	INT32U    dwPGN = 0;
+	INT8U     *bp;
+
+	bp = (INT8U*)&dwPGN;
+
+	*(bp    ) = *(IDR0_Add    ); 
+	*(bp + 1) = *(IDR0_Add + 1); 
+	*(bp + 2) = *(IDR0_Add + 2); 
+	*(bp + 3) = *(IDR0_Add + 3); 
+
+	dwPGN = ((dwPGN & 0x7FFFF) >> 1) | ((dwPGN & 0xFFE00000) >> 3);
+
+	return(dwPGN);                 
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_CANSendFrame
+* Description    : 
+* Input          : 
+* Output         : None
+* Return         : dwPGN
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U Api_CANSendFrame(CAN_message * CanMessage)
+{
+    INT8U txbuffer,index;
+    INT16U cn = null;
+    INT8U priority = 0;
+    INT8U length = CanMessage->Length;
+    INT32U  id = CanMessage->ID;
+
+    if (!CANTFLG) //Is Transmit Buffer full ? Full ( TXEx=0;)
+    {      
+        return   failt;
+    }
+    if(id == null)
+    {
+        return   failt;
+    }
+    
+    if(!CanMessage->ID_EN){
+        return   failt;
+    }
+      
+    
+    CANTBSEL = CANTFLG; /* Select lowest empty buffer */
+    txbuffer = CANTBSEL; // Backup selected buffer
+    /* Load Id to IDR Register */
+    //*((unsigned long *) ((unsigned long)(&CANTXIDR0))) = id; // I appreciate this , easy and good.
+    if (id < 0x00000800) 
+    {
+        CANTXIDR0 = (INT8U)(id>>3);
+        CANTXIDR1 = id<<5;
+        CANTXIDR2 = 0;
+        CANTXIDR3 = 0;
+    } 
+    else
+    {
+        CANTXIDR0 = (INT8U)((id & 0x1fe00000)>>21);
+        CANTXIDR1 = (INT8U)((id & 0x001c0000)>>13);
+        CANTXIDR1 |= (INT8U)((id & 0x00038000)>>15);
+        CANTXIDR1 |= 0x18;
+        CANTXIDR2 = (INT8U)((id & 0x00007f80)>>7);
+        CANTXIDR3 = (INT8U)((id & 0x0000007f)<<1);        
+    }
+
+    if(length>8)
+        length=8;
+    for ( index=0; index < length; index++) {
+        *(&CANTXDSR0 + index) = CanMessage->Msg[index]; //Load data to Tx buffer Data Segment Registers
+    }
+
+    CANTXDLR = length; /* Set Data Length Code */
+    CANTXTBPR = priority; /* Set Priority */
+    CANTFLG = txbuffer; /* Start transmission */
+    while ((CANTFLG & txbuffer) != txbuffer)
+    {
+          //; // Wait for Transmission   completion
+          cn++;
+          if(cn>WaitOverTime)
+              break;
+    }
+    return success;
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_CAN_Rev_isr
+* Description    : 提取标准ID
+* Input          : IDR0_Add          -> 对应的IDR0的地址
+* Output         : None
+* Return         : dwPGN
+* onther         : 
+--------------------------------------------------------------------------*/
+interrupt void Api_CAN_Rev_isr(void)
+{
+    INT32U    stand_id;
+    INT8U    m_dlc;
+    
+    stand_id = bsp_GET_EXTEND_ID((INT8U*)&CANRXIDR0);
+    m_dlc = CANRXDLR_DLC;
+    
+    switch(stand_id)
+    {
+        case 0x18DAF917: //车速
+            if(m_dlc == 8)
+            {         
+
+                UDS_Receive_Main(&CANRXDSR0);
+            }
+            break;
+        default:
+            ;
+        
+    }  
+             
+    CANRFLG_RXF = ClearFlag; 
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_DFlash.c

+#define  GLOBALS_API_DFLASH
+#include "../App_Headers/includes.h"
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Flash_Init
+* Description    : FLASH初始化
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_Flash_Init(void)
+{
+     FCNFG          = Disable;                   //禁止完成中断
+     FERCNFG        = Disable;                   //禁止错误中断
+     if(false != FERSTAT)
+     {
+          FERSTAT = 0x03;
+     }
+     if(false == FCLKDIV_FDIVLD)
+     {
+          if(True == FCLKDIV_FDIVLCK)
+          {
+               FCLKDIV_FDIVLCK = Disable;         //开启改写时钟Flash时钟分频
+          }
+          FCLKDIV_FDIV    = 32;                 //10
+          FCLKDIV_FDIVLCK = Enable;               //禁止改写时钟Flash时钟分频
+     }
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Flash_byte_read
+* Description    : 读取字节
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U Api_Flash_byte_read(INT16U _addr)
+{
+    return *(INT8U *)_addr;  
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_DFlashCommSequence
+* Description    : DFlash命令序列
+* Input          : bCommandCounter
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U  Api_DFlashCommSequence(INT8U bCommandCounter)
+{
+    INT8U     bCounter;
+    INT32U    dwDelay;
+    
+    if(MaxDFlashCommandCounter <= bCommandCounter)
+    {
+         return RunParameterErr;
+    }
+    //检测命令完成
+    dwDelay = null;
+    while(!FSTAT_CCIF)
+    {
+         dwDelay++;
+         if(dwDelay > MaxDelayTime)
+         {
+              bReturn = RunOverTimeErr;
+              break;
+         }
+    }
+    //命令正常完成
+    if(dwDelay < MaxDelayTime)
+    {
+         //清零ACCERR和FPVIOL标志
+         if((True == FSTAT_FPVIOL) ||
+            (True == FSTAT_ACCERR))
+         {
+              FSTAT = (FSTAT_FPVIOL_MASK | FSTAT_ACCERR_MASK);
+         }
+         //装载命令
+         for(bCounter = 0; bCounter <= bCommandCounter; bCounter++)
+         {
+              FCCOBIX = bCounter;
+              FCCOB   = FlashCommandArray[bCounter];
+         }
+         FSTAT_CCIF = True;                     //启动命令
+         //检测命令完成
+         dwDelay = 0;
+         while(!FSTAT_CCIF)
+         {
+              dwDelay++;
+              if(dwDelay > MaxDelayTime)
+              {
+                   bReturn = RunOverTimeErr;
+                   break;
+              }
+         }
+         if(dwDelay < MaxDelayTime)
+         {
+              if(false != FSTAT_ACCERR)
+              {
+                   bReturn = RunErrACCERR;
+              }
+              else
+              {
+                   if(false != FSTAT_FPVIOL) 
+                   {
+                        bReturn = RunErrFPVIOL;  
+                   }
+                   else
+                   {
+                        if(false != FSTAT_MGSTAT1)
+                        {
+                             bReturn = RunErrMGSTAT1;
+                        }
+                        else
+                        {
+                             if(false != FSTAT_MGSTAT0)
+                             {
+                                  bReturn = RunErrMGSTAT0;
+                             }
+                        }
+                   }
+              }
+         }
+    }
+    return(bReturn);
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_DFlashEraseSector
+* Description    : DFlash扇区擦除
+* Input          : wDestination
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U   Api_DFlashEraseSector(INT16U wDestination)
+{
+    INT16U    wCommand;
+    
+    if((wDestination & (INT16U)(DFLASH_SECTOR_SIZE -1)) != 0)
+    {
+         bReturn = RunParameterErr;
+    }
+    else
+    {
+    	   bReturn = RunComplete;
+         if((wDestination < DFLASH_BLOCK_START_ADDR) || \
+            (wDestination >= DFLASH_BLOCK_END_ADDR)  || \
+            ((wDestination + DFLASH_SECTOR_SIZE) > DFLASH_BLOCK_END_ADDR))
+         {
+              bReturn = RunParameterErr;
+         }
+         else
+         {    
+              wDestination = wDestination & (INT16U)~(DFLASH_SECTOR_SIZE -1); 
+              //命令准备
+              wCommand = ((INT16U)(DFLASH_ERASE_SECTOR) << 8);
+              FlashCommandArray[0] = (wCommand|GLOBAL_ADDRESS_DFLASH);
+              FlashCommandArray[1] = wDestination;
+              bReturn = Api_DFlashCommSequence(DFLASH_ERASE_COM_LENGTH);
+         }
+    }
+    return(bReturn);
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_DFlashEraseVerify
+* Description    : DFlash扇区擦除
+* Input          : wDestination
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U   Api_DFlashEraseVerify(INT16U wDestination, INT16U wSize)
+{
+    INT16U    wWordCounter;
+    INT16U    wCommand;
+    
+    bReturn = RunComplete;
+    if((0 != (wSize % WordSize)) ||
+       (wSize > DFLASH_SECTOR_SIZE))
+    {
+         bReturn = RunParameterErr;
+    }
+    else
+    {
+         if(0 != wSize)
+         {
+              wWordCounter             = (INT16U)(wSize / WordSize);
+              wCommand                 = (((INT16U)(DFLASH_ERASE_VERIFY)) << 8);
+              FlashCommandArray[0]    = (wCommand | GLOBAL_ADDRESS_DFLASH);
+              FlashCommandArray[1]    = wDestination;
+              FlashCommandArray[2]    = wWordCounter;
+              bReturn = Api_DFlashCommSequence(DFLASH_ERASE_VERIFY_COM_LENGTH);
+         }
+    }
+    return(bReturn);
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_DFlashEraseVerify
+* Description    : DFlash扇区擦除
+* Input          : wDestination
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U   Api_DFalshProgram(INT16U wDest,INT16U wByteNub,INT16U *wSource)
+{
+    INT8U     bLoopIndex;
+    INT8U     bCounter;
+    INT8U     bIndex;
+    INT16U    wEndAdd;
+    INT16U    wCommand;
+    
+
+    //else
+    {
+    	   bReturn = RunComplete;
+         wEndAdd = wDest + wByteNub;
+         //检测参数正确性
+         if((0 != (wByteNub % WordSize)) || 
+            (DFLASH_BLOCK_END_ADDR < wEndAdd))
+         {
+              bReturn = RunParameterErr;
+         }
+         else
+         {
+              wCommand = (((INT16U)(DFLASH_PROGRAM)) << 8);
+              while(wDest < wEndAdd)
+              {
+                   FlashCommandArray[0] = (wCommand | GLOBAL_ADDRESS_DFLASH);
+                   FlashCommandArray[1] = wDest;
+                   if(MaxProgramByteNumber < wByteNub) 
+                   {
+                        bLoopIndex = DFLASH_PROGRAM_COM_LENGTH;
+                   }
+                   else
+                   {
+                        bLoopIndex = (INT8U)(wByteNub / WordSize);
+                   }
+                   for(bCounter = 0;bCounter < bLoopIndex;bCounter++)
+                   {
+                        FlashCommandArray[bCounter + 2] = *wSource;
+                        wDest += WordSize;
+                        wSource++;
+                        wByteNub -= WordSize;   
+                   }
+                   bIndex = bLoopIndex + 1; 
+                   
+                   if(RunComplete != Api_DFlashCommSequence(bIndex))
+                   {
+                        break;
+                   }
+              }
+         }
+    }
+    return(bReturn);
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_Device_Init.c

+#define  GLOBALS_API_DEV
+#include "../App_Headers/includes.h"
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Sys_Init
+* Description    : 系统初始化
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_Sys_Init(void)
+{
+   DisableInterrupts;
+   Api_Clock_Init();     
+   Api_Flash_Init();   
+   Api_IO_init();
+   Api_CAN_Init();   
+   Api_Timer0_Init(TPM_DIV1);     
+   Api_SCI_Init();
+   Api_LCD_Init();
+   Api_Motor_Init();   
+   EnableInterrupts;
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Clock_Init
+* Description    : 系统时钟初始化
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_Clock_Init(void)
+{
+    INT32U    dwTime = null;
+    MODE      = NormalChip;
+    DIRECT    = InitDIRECT;           //初始化直接页寄存器
+    IVBR      = InitIVBR;             //初始化中断向量基地址
+    CPMUOSC_OSCE   = Enable;                //使能外部振荡器
+    while(!CPMUFLG_UPOSC)                   //等待振荡稳定
+    {
+        dwTime++;
+        if(dwTime > 10000)
+        {
+            dwTime = null;
+            break;
+        }
+    }
+    ECLKCTL_NECLK  = Enable;               //禁止ECLK输出
+    CPMUPROT       = InitCPMUPROT;         //禁止时钟保护   
+    CPMUREFDIV     = InitCPMUREFDIV;       //设置分频系数
+    CPMUSYNR       = InitCPMUSYNR;         //设置乘系数
+    CPMUPOSTDIV    = InitCPMUPOSTDIV;      //设置分频参数
+    CPMUPLL        = InitCPMUPLL;          //PLL频率调节
+    //CPMUCOP        = InitCPMUCOP;               //开启看门狗
+    CPMUCLKS       = InitCPMUCLKS;         //在停止模式下振荡运行 选择PLL时钟
+    CPMUCLKS_PLLSEL = Enable;
+                
+    CPMUOSC_OSCE   = Enable;               //使能外部振荡器
+    while(!CPMUFLG_UPOSC)                  //等待振荡稳定
+    { 
+       dwTime++;
+       _FEED_COP();
+       if(dwTime > 10000)
+       {
+           dwTime = null;
+           break;
+       }
+    }
+    CPMUCLKS_PSTP  = Enable;               //伪停止模式
+    CPMUCLKS_RTIOSCSEL = Enable;           //RTI STOP MODE 继续运行 
+    CPMUCLKS_PRE   = Enable;               
+    CPMUCLKS_COPOSCSEL = !Enable;           //COP STOP MODE 运行 
+    CPMUCLKS_PCE   = !Enable; 
+    
+    CPMUPROT       = Enable;               //使能时钟保护
+    CPMUHTCTL      = Disable;              //温度保护禁止
+    //中断
+    CPMUINT_OSCIE  = Disable;              //Osc
+    CPMUINT_LOCKIE = Disable;              //Lock
+    //RTI
+    CPMURTI_RTDEC  = True;                 //十进制
+    CPMURTI_RTR    = 0x03;                 //400*10^3
+    
+    CPMUINT_RTIE   = Enable;               //RTI  
+    CPMULVCTL_LVIE = Disable;              //LV
+    IRQCR          = Disable;              //IRQ  
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_IO_init
+* Description    : 
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_IO_init(void)
+{       
+    /*PUCR   = 0x40;  //上拉驱动使能 禁止下拉
+    
+    DDR1AD = 0x00;   
+    PER1AD = 0xD0;   
+        
+    DDRA   = 0xff;
+                        
+    DDRB   = 0xff;    
+             
+    DDRU   = 0xf0;    
+    PERU   = 0x0F;
+    PPSU   = 0x00;
+         
+    DDRR   = 0x70;        
+    PERR   = 0x00;  
+    PPSR   = 0x00;   
+      
+    DDRV   = 0xff;   
+    PERV   = 0x00;
+    PPSV   = 0x00;                   
+
+    DDRH   = 0xff;
+    PERH   = 0x00;
+    PPSH   = 0x00;
+    
+    DDRS   = 0x00;
+    PERS   = 0x00;
+    PPSS   = 0x00;  //选择上拉 还是下拉
+    RDRS   = 0x00;  //驱动能力选择          
+    PTSRR  = 0x10;  //控制IIC OR SPI  
+    
+    WOMS   = 0x00;
+    PIES   = 0x00;
+    PIFS   = 0x00;
+    SPICR1 = 0x00;
+    SPICR2 = 0x01;
+ 
+    PTPRR  = 0x06;
+    DDRP   = 0xf2; 
+    PERP   = 0x00;    
+    PPSP   = 0x00; 
+    
+    DDRT   = 0xff;    
+    PERT   = 0x00;
+    PPST   = 0x00; 
+         
+    PT1AD  = 0x00;
+    PORTA  = 0x00;
+    PORTB  = 0x00;
+    PTT    = 0x00;
+    PTH    = 0x00;
+    PTU    = 0x00;
+    PTP    = 0x00;
+    PTR    = 0x00;  
+    PTS    = 0x00; 
+    PTV    = 0x00;
+    ATDDIEN = 0xff;*/
+    
+     PUCR   = 0x40;  //上拉驱动使能 禁止下拉
+    
+    DDR1AD = 0x70;   
+    PER1AD = 0x0e;   
+        
+    DDRA   = 0xff;
+                        
+    DDRB   = 0xff;    
+             
+    DDRU   = 0xff;    
+    PERU   = 0x00;
+    PPSU   = 0x00;
+         
+    DDRR   = 0x70;        
+    PERR   = 0x00;  
+    PPSR   = 0x00;   
+      
+    DDRV   = 0xff;   
+    PERV   = 0x00;
+    PPSV   = 0x00;                   
+
+    DDRH   = 0xff;
+    PERH   = 0x00;
+    PPSH   = 0x00;
+    
+    DDRS   = 0x00;
+    PERS   = 0x00;
+    PPSS   = 0x00;  //选择上拉 还是下拉
+    RDRS   = 0x00;  //驱动能力选择          
+    PTSRR  = 0x10;  //控制IIC OR SPI  
+    
+    WOMS   = 0x00;
+    PIES   = 0x00;
+    PIFS   = 0x00;
+    SPICR1 = 0x00;
+    SPICR2 = 0x01;
+ 
+    PTPRR  = 0x06;
+    DDRP   = 0xf2; 
+    PERP   = 0x00;    
+    PPSP   = 0x00; 
+    
+    DDRT   = 0xff;    
+    PERT   = 0x00;
+    PPST   = 0x00; 
+         
+    PT1AD  = 0x00;
+    PORTA  = 0x00;
+    PORTB  = 0x00;
+    PTT    = 0x00;
+    PTH    = 0x00;
+    PTU    = 0x00;
+    PTP    = 0x00;
+    PTR    = 0x00;  
+    PTS    = 0x00; 
+    PTV    = 0x00;
+    ATDDIEN = 0xff;  
+}

知豆检测台/Test_Bench/Api_Sources/API_LCD.c

+#define GLOBALS_API_LCD
+#include "../App_Headers/includes.h"
+
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_LCD_Init
+* Description    : 
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void    Api_LCD_Init(void)
+{
+    INT8U     b;
+    INT8U     *bp;
+
+    LCDCR1_LCDSWAI = Disable;               //在停止模式下运行
+    LCDCR0_DUTY    = Duty4;                  // 1/4 Duty
+    LCDCR0_LCLK    = IRCCLK_1M;            // IRCCLK 1M
+    
+         
+    bp = &LCDRAM0;         
+    for(b = 0; b < 20;b++)
+    {
+         *bp = 0;                           //清零LCDRAM
+    }
+    
+    FPENR0 = 0xf0;                   //初始化各段
+    FPENR1 = 0xff;                   //初始化各段
+    FPENR2 = 0x7f;                   //初始化各段
+    FPENR3 = 0x00;                   //初始化各段
+    FPENR4 = 0x00;                   //初始化各段
+         
+    LCDCR0_LCDEN   = Enable;               //使能LCD
+    
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_LCD_Display
+* Description    : LCD显示
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_LCD_Display(void) 
+{    
+    LCDFP11BP = Matrix1[(Key.CAN_Step / 10) %10]>>4;
+    LCDFP12BP = Matrix1[(Key.CAN_Step / 10) %10];
+
+    LCDFP13BP = Matrix1[(Key.CAN_Step % 10)]>>4;
+    LCDFP14BP = Matrix1[(Key.CAN_Step % 10)];
+
+    
+    if(RunStep > 23)
+    {
+        LCDFP19BP = Matrix1[((Key.CAN_Step -24) / 10) %10]>>4;
+        LCDFP20BP = Matrix1[((Key.CAN_Step -24) / 10) %10];
+
+        LCDFP21BP = Matrix1[((Key.CAN_Step -24) % 10)]>>4;
+        LCDFP22BP = Matrix1[((Key.CAN_Step -24) % 10)];
+    }
+    else
+    {
+        LCDFP19BP = Matrix1[0]>>4;
+        LCDFP20BP = Matrix1[0];
+
+        LCDFP21BP = Matrix1[0]>>4;
+        LCDFP22BP = Matrix1[0]; 
+    }
+    //L
+    LCDFP18BP |= 0x08;
+    LCDFP20BP |= 0x08;
+    LCDFP22BP |= 0x08;
+    //E
+    LCDFP5BP |= 0x0f;
+    LCDFP6BP |= 0x01;
+    //D
+    LCDFP7BP |= 0x0d;
+    LCDFP8BP |= 0x07;
+    //-
+    LCDFP9BP |= 0x02;
+    //Z    
+    LCDFP15BP |= Matrix1[2]>>4;
+    LCDFP16BP |= Matrix1[2];
+    //H
+    LCDFP17BP |= 0x07;
+    LCDFP18BP |= 0x0e;
+                   
+    LCDRAM2_FP4BP = LCDFP4BP;
+    LCDRAM2_FP5BP = LCDFP5BP;
+    LCDRAM3_FP6BP = LCDFP6BP;
+    LCDRAM3_FP7BP = LCDFP7BP;
+    LCDRAM4_FP8BP = LCDFP8BP;   
+    LCDRAM4_FP9BP = LCDFP9BP;            
+    LCDRAM5_FP10BP = LCDFP10BP;
+    LCDRAM5_FP11BP = LCDFP11BP;
+    LCDRAM6_FP12BP = LCDFP12BP;
+    LCDRAM6_FP13BP = LCDFP13BP;
+    LCDRAM7_FP14BP = LCDFP14BP;
+    LCDRAM7_FP15BP = LCDFP15BP;
+    LCDRAM8_FP16BP = LCDFP16BP;
+    LCDRAM8_FP17BP = LCDFP17BP;
+    LCDRAM9_FP18BP = LCDFP18BP;
+    LCDRAM9_FP19BP = LCDFP19BP;
+    LCDRAM10_FP20BP = LCDFP20BP;
+    LCDRAM10_FP21BP = LCDFP21BP;
+    LCDRAM11_FP22BP = LCDFP22BP;
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_SCI.c

+#define  GLOBALS_API_SCI
+#include "../App_Headers/includes.h"
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_SCI_Init
+* Description    : SCI模块初始化
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_SCI_Init(void)
+{
+    SCICR1_LOOPS   = Disable;   //串口正常模式
+    SCICR1_SCISWAI = Enable;    //禁止等待模式
+    SCICR1_M       = Disable;   //8 byte 模式
+    SCICR1_WAKE    = Enable;    //Adrress Wake
+    SCICR1_PE      = Disable;   //禁止校验
+    SCISR1_RDRF    = Disable;
+
+    SCIACR1_RXEDGIE = Disable;  //
+    SCIACR1_BERRIE  = Disable;
+    SCIACR1_BKDIE   = Disable;
+    SCIACR2 = Disable;
+
+    SCIBDH_TNP     = div4;
+/*
+When IREN = 0 then,
+SCI baud rate = SCI bus clock / (16 x SBR[12:0])
+When IREN = 1 then,
+SCI baud rate = SCI bus clock / (32 x SBR[12:1])
+*/
+    SCIBDH_IREN    = Disable;   //禁止红外线
+    SCIBD_SBR      = 20;//baud_38400;
+
+    SCICR2_TIE  = Disable;
+    SCICR2_TCIE = Disable;
+    SCICR2_ILIE = Disable;
+    SCICR2_RE  = Enable;    //使能接收
+    SCICR2_TE  = Enable;    //使能发送
+    SCICR2_RWU = Disable;
+    SCICR2_SBK = Disable;   //使能发送
+  
+    SCICR2_RIE = Enable;    //使能接收中断
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_SCI_Trans_Bytes
+* Description    : 串口发送
+* Input          : INT8U *str,INT16U len
+* Output         : None
+* Return         : None
+* onther         : str:发送字符串   len:发送数据长度
+--------------------------------------------------------------------------*/
+void Api_SCI_Trans_Bytes(INT8U *str,INT8U len)
+{
+    INT8U i;    
+    for(i=0;i<len;i++)
+    {
+       Api_SCI_Trans_Byte((*str));
+       str++;
+    }
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_SCI_Trans_Byte
+* Description    : 串口发送
+* Input          : INT8U data
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void  Api_SCI_Trans_Byte(INT8U data)
+{
+    while(SCISR1_TDRE == null);
+    SCIDRL = data;
+    while(!SCISR1_TC);    
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_SCI_Rev_isr
+* Description    : 串口接收中断
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+interrupt void Api_SCI_Rev_isr(void)
+{    
+
+    if(SCISR1_RDRF == one)
+    {     
+        SCIRV[rvcnt] = SCIDRL;
+        rvcnt ++;    
+        if((SCIRV[0]==0xEB)&&(SCIRV[1]==0x90))
+        {                    
+            if(SCIRV[rvcnt-1]==0xAA)
+            {   
+                if((SCIRV[rvcnt-2]==0x55)&&(rvcnt >=126))
+                {
+                    rvcnt   = null;
+                    CarFlag.FlagBits.RS232RV_Full = Enable;
+                }
+            }       
+        }
+    }
+    if(SCIRV[0] !=0xEB)
+    {
+        rvcnt = null;
+    }
+    if(rvcnt >= SCI_LEN) 
+    {
+        rvcnt = null;
+    }
+    SCISR1_RDRF = ClearFlag;
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/API_TPM.c

+#define GLOBALS_API_TPM
+#include "../App_Headers/includes.h"
+
+
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Timer0_Init
+* Description    : 定时器0初始化
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_Timer0_Init(INT8U TPM_DIV)
+{
+    
+    TIM0_TSCR1_TSWAI = Enable;   //timer 0 在MCU等待模式下不能运行
+    TIM0_TSCR1_TSWAI = WaitRun;
+    TIM0_TSCR1_TSFRZ = Enable;   //timer 0 计数器在冻结模式下禁止运行
+    TIM0_TSCR1_TFFCA = Disable;  //正常清除标志位
+    TIM0_TSCR1_PRNT  = Disable;  // 
+    TIM0_TSCR2_PR    = TPM_DIV;  //Bus Clock / 4
+    TIM0_TSCR2_TCRE  = Disable;
+    TIM0_TTOV        = Disable;
+
+    TIM0_TCTL1 = Disable;        //禁止输出比较功能
+    TIM0_TCTL2 = Disable;
+    TIM0_TCTL3 = Disable;        //禁止输出比较功能
+    TIM0_TCTL4 = Disable; 
+        
+    TIM0_TFLG2_TOF   = Enable;
+    TIM0_TSCR1_TEN   = Enable;   //使能timer 0 正常功能
+    TIM0_TSCR2_TOI   = Enable;   //溢出中断使能
+    
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Timer1_Init
+* Description    : 定时器1初始化
+* Input          : 
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Api_Timer1_Init(INT8U TPM_DIV)
+{
+
+    TIM1_TSCR1_TSWAI = Enable;   //timer 0 在MCU等待模式下不能运行
+    TIM1_TSCR1_TSFRZ = Enable;   //timer 0 计数器在冻结模式下禁止运行
+    TIM1_TSCR1_TFFCA = Disable;  //正常清除标志位
+    TIM1_TSCR1_PRNT  = Disable;  // 
+    TIM1_TSCR2_PR    = TPM_DIV; //Bus Clock / 4
+    TIM1_TSCR2_TCRE  = Disable;
+    TIM1_TTOV        = Disable;
+
+    TIM1_TCTL1 = Disable;        //禁止输出比较功能
+    TIM1_TCTL2 = Disable;
+    TIM1_TCTL3 = Disable;        //禁止输出比较功能
+    TIM1_TCTL4 = Disable; 
+    
+    TIM1_TFLG2_TOF   = Enable;
+    TIM1_TSCR1_TEN   = Enable;   //使能timer 0 正常功能
+    TIM1_TSCR2_TOI   = Enable;   //溢出中断使能
+    
+
+}
+
+//-----------------------------------------------------------------------------
+// 函数名称   :    Api_Motor_Init
+// 函数功能   :    初始化电机驱动
+// 输入       :    
+//                 *Motor    ->   电机结构指针
+// 输出       :    无
+// 返回值     :    运行状态
+// 其他       :    无
+//-----------------------------------------------------------------------------
+void  Api_Motor_Init(void)
+{
+    INT16U         *w;
+    INT8U          Nub;
+
+    MCCTL0_MCPRE        = 0;            //时钟为总线的8分频
+    MCCTL0_MCSWAI       = Enable;          //停止模式停止工作 
+    MCCTL0_FAST         = Disable;         //11bit分辨率
+    MCCTL0_DITH         = Disable;         //PER-> P10-P0   0:包含P0
+    MCCTL0_MCTOIF       = ClearFlag;       //清零中断标志
+    MCCTL1_RECIRC       = True;            //低续流
+    MCCTL1_MCTOIE       = Enable;          //使能中断
+    MCPER               = 1454;       //PWM周期   中断频率 22000
+    //
+    MCCC0_MCOM          = clear;            //双全H桥模式
+    MCCC0_MCAM          = clear;         //左对齐
+    MCCC0_CD            = clear;         //禁止延时
+    MCCC1_MCOM          = clear;            //全H桥模式
+    MCCC1_MCAM          = clear;         //左对齐
+    MCCC1_CD            = clear;         //禁止延时
+    //
+    MCCC2_MCOM          = clear;            //双全H桥模式
+    MCCC2_MCAM          = clear;         //左对齐
+    MCCC2_CD            = clear;         //禁止延时
+    MCCC3_MCOM          = clear;            //全H桥模式
+    MCCC3_MCAM          = clear;         //左对齐
+    MCCC3_CD            = clear;         //禁止延时
+
+    
+    MCCC4_MCOM          = clear;         
+    MCCC4_MCAM          = clear;         
+    MCCC4_CD            = clear;         
+    MCCC5_MCOM          = clear;         
+    MCCC5_MCAM          = clear;       
+    MCCC5_CD            = clear;       
+    
+    
+    MCCC6_MCOM          = clear;            //双全H桥模式
+    MCCC6_MCAM          = clear;         //左对齐
+    MCCC6_CD            = clear;         //禁止延时
+    MCCC7_MCOM          = clear;            //全H桥模式
+    MCCC7_MCAM          = clear;         //左对齐
+    MCCC7_CD            = clear;         //禁止延时
+    
+    w = &MCDC0;                            //初始化MCOC 0-7
+         
+    for(Nub = 0;Nub < 8 ;Nub++)
+    {
+         *(w + Nub) = 0;         
+    }
+}
+//-----------------------------------------------------------------------------
+// 函数名称   :    Api_Motor_isr
+// 函数功能   :    PWM溢出中断
+// 输入       :    无
+// 输出       :    无
+// 返回值     :    无
+// 其他       :    无
+//-----------------------------------------------------------------------------
+interrupt void Api_Motor_isr(void)
+{
+
+
+    MCCTL0_MCTOIF       = ClearFlag;       //清零中断标志
+}
+/*-------------------------------------------------------------------------
+* Function Name  : Api_Timer0_isr
+* Description    : 定时器中断
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+interrupt void Api_Timer0_isr(void)
+{
+    if((CANRFLG_RSTAT == 0x03)||(CANRFLG_TSTAT == 0x03))
+    {
+        if(BusOffTime == null) 
+        {                       
+            BusOffTime = TT_200ms;
+            CANMISC_BOHOLD = ClearFlag;                                                 
+        }  
+        if(BusOffTime > null)
+        {
+             BusOffTime--;                 
+        }         
+    }    
+    TIM0_TFLG2_TOF = ClearFlag;  //清除中断标志位
+}
+/*-------------------------------------------------------------------------
+* Function Name  : API_Timer1_isr
+* Description    : 定时器中断
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+interrupt void API_Timer1_isr(void)
+{
+  
+    TIM1_TFLG2_TOF = ClearFlag;  //清除中断标志位
+}

知豆检测台/Test_Bench/Api_Sources/APP_CAN.c

+#define  GLOBALS_APP_CAN
+#include "../App_Headers/includes.h"
+#include "../Library/TimeCtrl.h"
+#include "../Library/FT_VehSpeedCalc.h"
+
+#define   LED_P_NUMBER       0     //正控灯数量
+#define   LED_N_NUMBER       0     //负控灯数量
+#define   CAN_MAGS_NUMBER    10    //can报文数量
+#define   OIL_MUMBER         0     //水油检测点数
+
+
+INT8U led_P = 0,
+      led_N = 0,
+      can_num = 0,
+      oil_num = 0;
+      
+
+
+
+
+void flash_1Hz_process(void)//500ms call         blink/flash
+{
+    Flash_1Hz = !(Flash_1Hz);
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : App_Msg_Copy
+* Description    : 
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void App_Msg_Copy(CAN_message * CanMessage,INT16U* data)
+{
+    CanMessage->Msg[0] = data[0];
+    CanMessage->Msg[0] = data[1];
+    CanMessage->Msg[0] = data[2];
+    CanMessage->Msg[0] = data[3];
+    CanMessage->Msg[0] = data[4];
+    CanMessage->Msg[0] = data[5];
+    CanMessage->Msg[0] = data[6];
+    CanMessage->Msg[0] = data[7];
+    //bReturn = Api_CANSendFrame(pMsg->id,0,pMsg->Len,pMsg->Data);
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : Write_CAN_Msg
+* Description    : 
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void Write_CAN_Msg(CAN_message * CanMessage,INT8U i,INT8U data)
+{ 
+    CanMessage->Msg[i] = data;  
+}
+
+void Clear_CAN_Msg(CAN_message * CanMessage)
+{ 
+    INT8U i = 0;
+    
+    for (i; i <= (CanMessage->Length - 1); i++) 
+    {
+      CanMessage->Msg[i]  = 0x00;
+    }
+    CanMessage->ID_EN = 1;
+}
+
+void Set_CAN_Msg(CAN_message * CanMessage)
+{ 
+    INT8U i = 0;
+    
+    for (i; i <= (CanMessage->Length - 1); i++) 
+    {
+      CanMessage->Msg[i]  = 0xFF;
+    }
+}
+
+void Set_CAN_CRC(CAN_message * CanMessage){
+    INT8U i;
+    for(i = 1; i < CanMessage->Length; i++){
+        CanMessage->Msg[0] ^= CanMessage->Msg[i];
+    }
+}
+
+/*zh:
+0CFF7902
+0CFF7C02
+18FFDC01
+18FEDCD5
+18FEDED5
+*/
+void Format_CAN_Msg() 
+{
+    CanMsg_330.ID = 0x330;
+    CanMsg_360.ID = 0x360;
+    CanMsg_385.ID = 0x385;
+
+    CanMsg_330.Length = 8;
+    CanMsg_360.Length = 8;
+    CanMsg_385.Length = 8;
+
+
+    CanMsg_330.ID_EN = 1;
+    CanMsg_360.ID_EN = 1;
+    CanMsg_385.ID_EN = 1;
+} 
+
+void Disable_CAN_Tx(void){
+    
+    CanMsg_330.ID_EN = 0;
+    CanMsg_360.ID_EN = 0;
+    CanMsg_385.ID_EN = 0;
+}
+
+void Set_Pin(INT16U pin)
+{
+
+}
+            
+
+/*-------------------------------------------------------------------------
+* Function Name  : App_Can_Proc
+* Description    : 
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+
+void App_Can_Proc(void)
+{
+    unsigned char i;
+    unsigned int gMsg;
+
+    for(i = 0; i < CAN_List_Num; i++){
+        Message_Value_Calculate(CAN_List[i]);
+    }
+
+    
+    if(GetCtrlTime(CANMsgSend_10ms) >= 10){
+        ClearCtrlTime(CANMsgSend_10ms);
+
+        
+        //bReturn = Api_CANSendFrame((CAN_message *)&CanMessageID18FEDCD5);
+        //bReturn = Api_CANSendFrame((CAN_message *)&CanMessageID18FEDED5);
+        
+        //Clear_CAN_Msg((CAN_message *)&CanMessageID18FEDCD5);
+        //Clear_CAN_Msg((CAN_message *)&CanMessageID18FEDED5);
+    }
+
+    if(GetCtrlTime(CANMsgSend_20ms) >= 20){
+        ClearCtrlTime(CANMsgSend_20ms);
+        
+        
+    }
+
+    if(GetCtrlTime(CANMsgSend_50ms) >= 50){
+        ClearCtrlTime(CANMsgSend_50ms);
+        
+        bReturn = Api_CANSendFrame((CAN_message *)&CanMsg_330);
+        Clear_CAN_Msg((CAN_message *)&CanMsg_330);
+        bReturn = Api_CANSendFrame((CAN_message *)&CanMsg_360);
+        Clear_CAN_Msg((CAN_message *)&CanMsg_360);
+        bReturn = Api_CANSendFrame((CAN_message *)&CanMsg_385);
+        Clear_CAN_Msg((CAN_message *)&CanMsg_385);
+
+        
+    }
+
+    if(GetCtrlTime(CANMsgSend_100ms) >= 100){
+
+        ClearCtrlTime(CANMsgSend_100ms);
+        
+    }
+
+    if(GetCtrlTime(CANMsgSend_200ms) >= 200){
+
+        ClearCtrlTime(CANMsgSend_200ms);
+
+    }
+
+    if(GetCtrlTime(CANMsgSend_500ms) >= 500){
+
+        flash_1Hz_process();
+
+        ClearCtrlTime(CANMsgSend_500ms);
+
+    }
+
+    if(GetCtrlTime(CANMsgSend_1s) >= 1000){
+
+        ClearCtrlTime(CANMsgSend_1s);
+
+    }
+    
+    if(GetCtrlTime(CANMsgSend_10s) >= 10000){
+
+        ClearCtrlTime(CANMsgSend_10s);
+       
+    }
+
+    //REV 0
+    /*CanMessageID0CF80AF0.Msg[0] = 0x98;
+    CanMessageID0CF80AF0.Msg[1] = 0x3A;
+    
+    CanMessageID18F816F3.Msg[3] |= 0x10; */
+
+    
+
+    CurValueStr[ENUM_VSpeed         ].val = 0;
+    CurValueStr[ENUM_Water          ].val = 0;
+
+    
+    
+    CurValueStr[ENUM_VSpeed         ].fval = Value_Plus;
+    CurValueStr[ENUM_Water          ].fval = Value_Plus;
+
+    
+    
+
+
+   // CurVehSpeed = 0;
+
+    //LDW Open
+    //CanMessageID18FE5BE8.Msg[0] |= 0x40;
+    //FCW Open
+  //  CanMessageID0CF02FA0.Msg[0] |= 0x03;
+    //AutoLwBm Open
+//    CanMessageID18FF0B21.Msg[5] |= 0x10;
+
+}
+

知豆检测台/Test_Bench/Api_Sources/APP_DFlash.c

+#define  GLOBALS_APP_DFLASH
+#include "../App_Headers/includes.h"
+
+
+//-----------------------------------------------------------------------------
+// 函数名称   :    App_CopyRam(INT8U *Dp,INT8U *Sp,INT8U Nub)
+// 函数功能   :    RAM 复制
+// 输入       :    *Dp       -> 目的地址
+//                 *Sp       -> 原地址
+//                 Nub       -> 复制字节数量
+// 输出       :    无
+// 返回值     :    无
+// 其他       :    无
+//-----------------------------------------------------------------------------
+void App_CopyRam(INT8U *Dp,INT8U *Sp,INT8U Nub)
+{
+    INT8U b;
+    
+    for(b = 0;b < Nub;b++)
+    {
+         *Dp++ = *Sp++;           
+    }
+}
+/*-------------------------------------------------------------------------
+* Function Name  : App_Read_EE_Memory
+* Description    : 读取EEPROM中数据
+* Input          : INT32U addr,INT8U *DestStr,INT16U len
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void App_Read_EE_Memory(INT16U ReadAddr,INT8U *DestStr,INT16U len)
+{
+    INT16U i;
+    for(i= 0;i<len;i++)
+    {
+        *(DestStr + i) = Api_Flash_byte_read(ReadAddr + i);
+    } 
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/APP_Data_Process.c

+/*
+ * APP_Data_Process.c
+ *
+ *  Created on: 2012-6-17
+ *      Author: qitiancun
+ */
+#define GLOBALS_APP_PROCESS
+#include "../App_Headers/includes.h"
+
+
+//CAN_message                 CanMsg_385;
+//CAN_message                 CanMsg_155;
+
+//CAN_message                 CanMsg_101;
+//CAN_message                 CanMsg_205;
+//CAN_message                 CanMsg_212;
+//CAN_message                 CanMsg_323;
+//CAN_message                 CanMsg_109;
+//CAN_message                 CanMsg_26D;
+
+
+
+
+/*-------------------------------------------------------------------------
+* Function Name  : App_State_Init
+* Description    : 加载数据
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void App_State_Init(void)
+{
+    
+}
+/*-------------------------------------------------------------------------
+* Function Name  : App_Load_Data
+* Description    : 加载数据
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void App_Load_Data(void)
+{
+    App_Read_EE_Memory(DFLASH_RADIO_ADDR- DFLASH_PROGRAM_OFFSET,(INT8U *)&Radio,8);
+    check = App_CreateCheckSun((INT8U*)&Radio.VehRadio,Radio.bFlag,6);
+    
+    if((Radio.bFlag != 0x55)||(check != Radio.bCheckSun))
+    { 
+        Radio.RevRadio = 40; 
+        Radio.VehRadio = 568;
+        Radio.VehNum = 4;
+    } 
+}
+
+/*-------------------------------------------------------------------------
+* Function Name  : App_SCI_Proc
+* Description    : 串口数据处理
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+INT8U App_CreateCheckSun(INT8U *pData,INT8U checkbyte,INT8U len)
+{
+  	INT8U Check=0,i;
+  	Check = 0xff ^ checkbyte;
+  	for(i=0;i<len;i++)
+  	{
+  		Check = Check ^ pData[i];
+  	}
+  	return Check;
+}
+
+void App_Uds_Calc_Key(INT32U seed)
+{
+	aaaa = 0xb5;//00000000 00000000 00000000 10110101
+	bbbb = 0xa3;//00000000 00000000 00000000 10100011   
+	cccc = 0xf1;//00000000 00000000 00000000 11110001		
+	dddd = 0x36;//00000000 00000000 00000000 00110110 
+
+	dwSeed4 = (INT8U)( seed & 0x000000ff);        //00000000 00000000 00000000 000000ff
+	dwSeed3 = (INT8U)((seed & 0x0000ff00) >> 8);  //00000000 00000000 0000ff00 00000000
+	dwSeed2 = (INT8U)((seed & 0x00ff0000) >> 16); //00000000 00ff0000 00000000 00000000
+	dwSeed1 = (INT8U)((seed & 0xff000000) >> 24); //ff000000 00000000 00000000 00000000		
+
+
+	dwKey1 = (INT8U)((aaaa * (dwSeed1 * dwSeed1)) + (bbbb * (dwSeed2 * dwSeed2)) + (cccc * (dwSeed1 * dwSeed2)));
+	dwKey2 = (INT8U)((aaaa *             dwSeed1) + (bbbb *             dwSeed2) + (dddd * (dwSeed1 * dwSeed2))); 
+	dwKey3 = (INT8U)((aaaa * (dwSeed3 * dwSeed4)) + (bbbb * (dwSeed4 * dwSeed4)) + (cccc * (dwSeed3 * dwSeed4))); 
+	dwKey4 = (INT8U)((aaaa * (dwSeed3 * dwSeed4)) + (bbbb *             dwSeed4) + (dddd * (dwSeed3 * dwSeed4))); 
+
+	CalcKey = (dwKey1 << 24UL) | (dwKey2 << 16UL) | (dwKey3 << 8UL) | dwKey4;
+}
+
+void UDS_Receive_Main(unsigned char *buf)
+{
+    switch(EOLStep)
+    {
+        case 0:
+        {
+            if((buf[1] == 0x62) && (buf[2] == 0x02) && (buf[3] == 0x1F) && (buf[4] != EOLMode))
+            {
+                EOLStep = 1;
+            }
+            else
+            {
+                EOLStep = 0;
+                EOLError = 0;
+            }
+        }
+        break;
+
+        case 1:
+        {
+            if((buf[1] == 0x50) && (buf[2] == 0x03))
+            {
+                EOLStep = 2;
+                EOLError = 0;
+            }
+            else
+            {
+                EOLError++;
+            }
+        }
+        break;
+
+        case 2:
+        {
+            if((buf[1] == 0x67) && (buf[2] == 0x01))
+            {
+                GetSeed = buf[3];
+                GetSeed = GetSeed << 8;
+                GetSeed |= buf[4];
+                GetSeed = GetSeed << 8;
+                GetSeed |= buf[5];
+                GetSeed = GetSeed << 8;
+                GetSeed |= buf[6];
+
+                EOLStep = 3;
+                EOLError = 0;
+            }
+            else
+            {
+                EOLError++;
+            }
+        }
+        break;
+
+        case 3:
+        {
+            if((buf[1] == 0x67) && (buf[2] == 0x02))
+            {
+                EOLStep = 4;
+                EOLError = 0;
+            }
+            else
+            {
+                EOLError++;
+            }
+        }
+        break;
+
+        case 4:
+        {
+            if((buf[1] == 0x6E) && (buf[2] == 0x02) && (buf[3] == 0x1F))
+            {
+                EOLStep = 5;
+                EOLError = 0;
+            }
+            else
+            {
+                EOLError++;
+            }
+        }
+        break;
+
+        case 5:
+        {
+            if((buf[1] == 0x51) && (buf[2] == 0x01))
+            {
+                EOLStep = 0;
+                EOLError = 0;
+            }
+            else
+            {
+                EOLError++;
+            }
+        }
+        break;
+
+        default:
+        {
+            EOLStep = 0;
+            EOLError = 0;
+        }
+    }
+
+    if(EOLError >= 5)
+    {
+        EOLStep = 0;
+        EOLError = 0;
+    }
+
+
+
+}
+
+
+void Service_10_03_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    CanMessageID18DA17F9.Msg[0] = 0x02;
+    CanMessageID18DA17F9.Msg[1] = 0x10;
+    CanMessageID18DA17F9.Msg[2] = 0x03;
+    */
+}
+
+void Service_11_01_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    CanMessageID18DA17F9.Msg[0] = 0x02;
+    CanMessageID18DA17F9.Msg[1] = 0x11;
+    CanMessageID18DA17F9.Msg[2] = 0x01;
+    */
+}
+
+void Service_22_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    CanMessageID18DA17F9.Msg[0] = 0x03;
+    CanMessageID18DA17F9.Msg[1] = 0x22;
+    CanMessageID18DA17F9.Msg[2] = 0x02;
+    CanMessageID18DA17F9.Msg[3] = 0x1F;
+    */
+}
+
+void Service_27_01_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    CanMessageID18DA17F9.Msg[0] = 0x02;
+    CanMessageID18DA17F9.Msg[1] = 0x27;
+    CanMessageID18DA17F9.Msg[2] = 0x01;
+    */
+}
+
+void Service_27_02_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    App_Uds_Calc_Key(GetSeed);
+
+    CanMessageID18DA17F9.Msg[0] = 0x06;
+    CanMessageID18DA17F9.Msg[1] = 0x27;
+    CanMessageID18DA17F9.Msg[2] = 0x02;
+    CanMessageID18DA17F9.Msg[3] = (unsigned char)(CalcKey >> 24);
+    CanMessageID18DA17F9.Msg[4] = (unsigned char)(CalcKey >> 16);
+    CanMessageID18DA17F9.Msg[5] = (unsigned char)(CalcKey >> 8);
+    CanMessageID18DA17F9.Msg[6] = (unsigned char)(CalcKey);
+    */
+}
+
+void Service_2E_Proc(void)
+{
+    /*
+    CanMessageID18DA17F9.ID = 0x18DA17F9;
+    CanMessageID18DA17F9.ID_EN = 1;
+    CanMessageID18DA17F9.Length = 8;
+
+    CanMessageID18DA17F9.Msg[0] = 0x04;
+    CanMessageID18DA17F9.Msg[1] = 0x2E;
+    CanMessageID18DA17F9.Msg[2] = 0x02;
+    CanMessageID18DA17F9.Msg[3] = 0x1F;
+    CanMessageID18DA17F9.Msg[4] = EOLMode;
+    */
+}
+
+void UDS_Service_Main(void)
+{
+    switch(EOLStep)
+    {
+        case 0:
+        {
+            Service_22_Proc();
+        }
+        break;
+
+        case 1:
+        {
+            Service_10_03_Proc();
+        }
+        break;
+
+        case 2:
+        {
+            Service_27_01_Proc();
+        }
+        break;
+
+        case 3:
+        {
+            Service_27_02_Proc();
+        }
+        break;
+
+        case 4:
+        {
+            Service_2E_Proc();
+        }   
+        break;
+
+        case 5:
+        {
+            Service_11_01_Proc();
+        }   
+        break;
+
+        default:
+        {
+            EOLStep = 0;
+            EOLError = 0;
+        }
+    }
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/APP_SCI.c

+#define GLOBALS_APP_SCI
+#include "../App_Headers/includes.h"
+
+/*-------------------------------------------------------------------------
+* Function Name  : App_SCI_Proc
+* Description    : 串口数据处理
+* Input          : None
+* Output         : None
+* Return         : None
+* onther         : 
+--------------------------------------------------------------------------*/
+void App_SCI_Proc(void)
+{
+    if(CarFlag.FlagBits.RS232RV_Full == Enable)
+    {
+        CarFlag.FlagBits.RS232RV_Full = Disable;
+        App_CopyRam((INT8U *)&SciFrame,(INT8U *)SCIRV,SCI_LEN);
+        if(SCIRV[2] == 1)   //车速
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x01;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+
+           
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        }
+        if(SCIRV[2] == 2)   //转速
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x02;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+
+           
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        } 
+        if(SCIRV[2] == 3)   //水温
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x03;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+
+           
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        }  
+        if(SCIRV[2] == 4)   //燃油
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x04;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+
+
+           
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        } 
+        if(SCIRV[2] == 11)   //速比
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x0b;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+
+            App_CopyRam((INT8U *)&SCIRV[7],(INT8U *)&Radio.VehRadio,6);
+           
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        } 
+        if(SCIRV[2] == 12)   //电压
+        {
+            SCIRV[0] = 0xeb;
+            SCIRV[1] = 0x90;
+            SCIRV[2] = 0x55;
+            SCIRV[3] = 0x0c;
+            SCIRV[4] = 0x02;//上传
+            SCIRV[5] = 0x00; 
+            SCIRV[6] = 0x21;
+            //Veh
+            SCIRV[7] = 0;//ADEveArry.TmpEven
+            SCIRV[8] = 0;
+            //Rev
+            SCIRV[9] = 0;
+            SCIRV[10] = 0;
+            //tmp
+            SCIRV[11] = 0;
+            SCIRV[12] = 0;
+            //fuel
+            SCIRV[13] = 0;
+            SCIRV[14] = 0;
+                                                            
+            SCIRV[40] = App_CreateCheckSun((INT8U*)&SCIRV[7],SCIRV[2],33);
+            SCIRV[41] = 0x55;
+            SCIRV[42] = 0xaa;
+            Api_SCI_Trans_Bytes((INT8U *)SCIRV,43);
+        }                    
+        if(SciFrame.Dir == DownLoad)
+        {
+
+            switch(SciFrame.Frame_Type)
+            {
+
+                    
+                case VehType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+                  	    SCIRV[0] = 0xeb;
+                  	    SCIRV[1] = 0x90;
+                  	    SCIRV[2] = 0x01;
+                  	    SCIRV[3] = 0x55;
+                  	    SCIRV[4] = 0xaa;
+                  	    Api_SCI_Trans_Bytes((INT8U *)SCIRV,5);
+                  	}                  	                    
+                    break; 
+                case RevType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+                  	    SCIRV[0] = 0xeb;
+                  	    SCIRV[1] = 0x90;
+                  	    SCIRV[2] = 0x02;
+                  	    SCIRV[3] = 0x55;
+                  	    SCIRV[4] = 0xaa;
+                  	    Api_SCI_Trans_Bytes((INT8U *)SCIRV,5);
+                  	}                  	                    
+                    break;  
+                case TmpType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+
+                  	    SCIRV[0] = 0xeb;
+                  	    SCIRV[1] = 0x90;
+                  	    SCIRV[2] = 0x03;
+                  	    SCIRV[3] = 0x55;
+                  	    SCIRV[4] = 0xaa;
+                  	    Api_SCI_Trans_Bytes((INT8U *)SCIRV,5);
+                  	}                  	                    
+                    break; 
+                case FueType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+
+                  	    SCIRV[0] = 0xeb;
+                  	    SCIRV[1] = 0x90;
+                  	    SCIRV[2] = 0x04;
+                  	    SCIRV[3] = 0x55;
+                  	    SCIRV[4] = 0xaa;
+                  	    Api_SCI_Trans_Bytes((INT8U *)SCIRV,5);
+                  	}                  	                    
+                    break;  
+                case RadioType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+                  	    Radio.bFlag = SciFrame.Frame_Check;
+                  	    App_CopyRam((INT8U *)&Radio.VehRadio,(INT8U *)&SciFrame.Frame_Data[0],2);
+                  	    App_CopyRam((INT8U *)&Radio.VehNum,(INT8U *)&SciFrame.Frame_Data[2],2);
+                  	    App_CopyRam((INT8U *)&Radio.RevRadio,(INT8U *)&SciFrame.Frame_Data[4],2);
+                  	    
+                  	    Radio.bCheckSun = App_CreateCheckSun((INT8U*)&Radio.VehRadio,Radio.bFlag,6);
+                  	    
+                  	    SCIRV[0] = 0xeb;
+                  	    SCIRV[1] = 0x90;
+                  	    SCIRV[2] = 0x0b;
+                  	    SCIRV[3] = 0x55;
+                  	    SCIRV[4] = 0xaa;
+                  	    Api_SCI_Trans_Bytes((INT8U *)SCIRV,5);
+                  	    _FEED_COP();
+
+                        bReturn = Api_DFlashEraseSector(DFLASH_RADIO_ADDR);   
+                        bReturn = Api_DFalshProgram(DFLASH_RADIO_ADDR,PAGE_LEN,(INT16U*)&Radio);
+                  	}                  	                    
+                    break; 
+                case AccType:                
+                  	check = App_CreateCheckSun((INT8U*)SciFrame.Frame_Data,SciFrame.Frame_Check,33);
+                  	if(check == SciFrame.Frame_CheckSun)
+                  	{
+                
+                  	}                  	                    
+                    break;                                                                                                                 
+                default:
+                    ;
+            }
+        }
+        SciFrame.Frame_Head[0] = null;
+        SciFrame.Frame_Data[0] = null;
+        SciFrame.Frame_Data[1] = null;
+        SciFrame.Frame_Type = null;
+        SciFrame.Dir = null;
+        SCIRV[4] = null;
+    }
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/APP_Test.c

+#define  GLOBALS_APP_TEST
+#include "../App_Headers/includes.h"
+#include "../Library/TimeCtrl.h"
+
+#define STEP_MAX        34//
+
+void All_Lamp_TurnOn(void);
+
+void APP_Test_Init(void){
+    Key.StepAuto = null;
+    Key.CAN_Step = null;
+    Key.CAN_Step = null;
+
+   // CurValueStr[ENUM_BatteryCurrent].val = 0;
+    //CurValueStr[CoolTemp].val = 0;
+    //CurValueStr[VehSpeed].val = 0;
+    //CurValueStr[AD_Blue].val = 0;
+
+   // CurValueStr[ENUM_BatteryCurrent].fval = Value_Plus;
+    //CurValueStr[CoolTemp].fval = Value_Plus;
+    //CurValueStr[VehSpeed].fval = Value_Plus;
+    //CurValueStr[AD_Blue].fval = Value_Plus;
+
+    //CanMessageID18F00029.Msg[1] = 0x7D;
+
+    //LDW Open
+    //CanMessageID18FE5BE8.Msg[0] |= 0x40;
+    //FCW Open
+   // CanMessageID0CF02FA0.Msg[0] |= 0x03;
+    //AutoLwBm Open
+  //  CanMessageID18FF0B21.Msg[5] |= 0x10;
+
+    EOLMode = 1;
+    EOLStep = 0;
+    EOLError = 0;
+}
+
+void APP_Button_Proc(void){
+    /*if(Key.PushTime_1 > T_3s){
+        Key.StepAuto = 1;
+    }
+    if(Key.PushTime_2 > T_3s){
+        Key.StepAuto = 2;
+    }*/      
+    
+    if((Key.PushTime_2 > T_2s) || (Key.PushTime_1 > T_2s)){
+        Key.StepAuto = 1;
+    }
+    
+    if(pSB1 == 1){
+        if((Key.PushTime_1 > T_50ms) && (!Key.StepAuto)){
+            Key.CAN_Step++;
+            if(Key.CAN_Step > STEP_MAX){
+                Key.CAN_Step = 0;
+            }
+        }
+        Key.PushTime_1 = null;
+    }
+    
+    if(pSB2 == 1){
+        if((Key.PushTime_2 > T_50ms) && (!Key.StepAuto)){
+            if(Key.CAN_Step > 0){
+                Key.CAN_Step--;
+            }else{
+                Key.CAN_Step = STEP_MAX;
+            }
+        }
+        Key.PushTime_2 = null;
+    }
+}
+
+
+
+
+#define  TirePressure(value)  CurValueStr[ENUM_TirePressure_LF].val = value; CurValueStr[ENUM_TirePressure_RF].val = value; CurValueStr[ENUM_TirePressure_LR].val = value; CurValueStr[ENUM_TirePressure_RR].val = value;  
+
+#define  TireTemp(value)      CurValueStr[ENUM_TireTemp_LF    ].val = value; CurValueStr[ENUM_TireTemp_RF    ].val = value; CurValueStr[ENUM_TireTemp_LR    ].val = value; CurValueStr[ENUM_TireTemp_RR    ].val = value;
+
+
+
+void APP_ICM_Proc(void)  /*zh321*/  /*FS04*/
+{
+    switch(Key.CAN_Step)
+    {
+        case 1:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 52;//
+            CurValueStr[ENUM_Water         ].val = 58;
+        }break;
+        case 2:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 108;//
+            CurValueStr[ENUM_Water         ].val = 68;
+        }break;
+        case 3:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 165;//
+            CurValueStr[ENUM_Water         ].val = 85;
+        }break;
+        case 4:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 222;//
+            CurValueStr[ENUM_Water         ].val = 102;
+        }break;
+        case 5:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 279;//
+            CurValueStr[ENUM_Water         ].val = 115;
+        }break;
+        case 6:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 335;//
+            CurValueStr[ENUM_Water         ].val = 120;
+        }break;
+        case 7:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 388;//
+            CurValueStr[ENUM_Water         ].val = 140;
+            Bits_Operation(&CanMsg_385, 0, 6, 2, 1);    //EDR
+        }break;
+        case 8:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 440;//
+            Bits_Operation(&CanMsg_360, 0, 4, 2, 1); //GPFƵ
+
+        }break;
+        case 9:
+        {   
+            CurValueStr[ENUM_VSpeed         ].val = 500;//
+            Bits_Operation(&CanMsg_360, 0, 4, 2, 2);//GPF
+
+        }break;
+
+        default:
+        Key.CAN_Step = null;
+        break;
+    }
+}
+
+
+void Message_ClearDatas(CAN_message *Message, unsigned char StartByte, unsigned char StartBit, unsigned char len, unsigned char Format){
+    unsigned char pBit, pByte, i;
+
+    pBit = StartBit;
+    pByte = StartByte;
+
+    switch(Format){
+        case Motorola:{
+            for(i = 0; i < len; i++){
+                __RESET_WATCHDOG();
+                Message->Msg[pByte] &= ~(1 << pBit);
+                pBit++;
+                if(pBit >= 8){
+                    pBit = 0;
+                    if(pByte > 0){
+                        pByte--;
+                    }else{
+                        break;
+                    }
+                }
+            }
+        }break;
+
+        case Intel:{
+            for(i = 0; i < len; i++){
+                __RESET_WATCHDOG();
+                Message->Msg[pByte] &= ~(1 << pBit);
+                pBit++;
+                if(pBit >= 8){
+                    pBit = 0;
+                    if(pByte < 7){
+                        pByte++;
+                    }else{
+                        break;
+                    }
+                }
+            }
+        }break;
+
+        default:{
+            ;
+        }
+    }
+}
+
+void Message_FillDatas(CAN_message *Message, unsigned char StartByte, unsigned char StartBit, unsigned char len, unsigned char Format, unsigned long MessageValue){
+    unsigned char pBit, pByte, i;
+
+    pBit = StartBit;
+    pByte = StartByte;
+    MessageValue = MessageValue << pBit;
+
+    switch(Format){
+        case Motorola:{
+            for(i = 0; i < len; i++){
+                __RESET_WATCHDOG();
+                Message->Msg[pByte] |= MessageValue & (1 << pBit);
+                pBit++;
+                if(pBit >= 8){
+                    pBit = 0;
+                    if(pByte > 0){
+                        pByte--;
+                        MessageValue = MessageValue >> 8;
+                    }else{
+                        break;
+                    }
+                }
+            }
+        }break;
+
+        case Intel:{
+            for(i = 0; i < len; i++){
+                __RESET_WATCHDOG();
+                Message->Msg[pByte] |= MessageValue & (1 << pBit);
+                pBit++;
+                if(pBit >= 8){
+                    pBit = 0;
+                    if(pByte < 7){
+                        pByte++;
+                        MessageValue = MessageValue >> 8;
+                    }else{
+                        break;
+                    }
+                }
+            }
+        }break;
+
+        default:{
+            ;
+        }
+    }
+}
+
+
+
+void Message_Value_Calculate(s_CAN_List list)
+{
+
+    CAN_message *CanMessage;
+    INT8U Start_Byte, Start_Bit, len, Offset_Flag, Format_Flag;
+    INT16U Offset, Factor_1, Factor_2, CurValue, Value_Flag;
+
+    INT32U temp;
+    INT32U Message_Clear;
+    INT8U  Byte_Count;
+    INT8U  i;
+
+    CanMessage = list.canMsg;
+    Start_Byte = list.StartByte;
+    Start_Bit = list.StartBit;
+    len = list.SignalLen;
+    Offset_Flag = list.fOffset;
+    Format_Flag = list.fFormat;
+    Offset = list.Offset;
+    Factor_1 = list.Factor_1;
+    Factor_2 = list.Factor_2;
+
+    CurValue = list.CurValue->val;
+    Value_Flag = list.CurValue->fval;
+
+
+
+    temp = CurValue;
+
+    //计算偏移??
+    if(Offset != 0){
+        if(Offset_Flag  == Offset_Minus){
+            if(Value_Flag == Value_Minus){
+                if(temp > Offset){
+                    temp = 0;               //错误，所要实现的值小于物理最小�?
+                }else{
+                    temp = Offset - temp;
+                }
+            }else if(Value_Flag == Value_Plus){
+                temp += Offset;
+            }else{;}
+        }else if(Offset_Flag  == Offset_Plus){
+            if(temp < Offset){
+                temp = 0;               //错误，所要实现的值小于物理最小�?
+            }else{
+                temp -= Offset;
+            }
+        }
+        
+    }
+
+    temp = temp * Factor_1 / Factor_2;
+    //temp = temp << Start_Bit;
+
+    Byte_Count = len / 8;
+    if((len % 8) != 0){
+        Byte_Count += 1;
+    }
+
+    //清脏数据
+    Message_ClearDatas(CanMessage, Start_Byte, Start_Bit, len, Format_Flag);
+    Message_FillDatas(CanMessage, Start_Byte, Start_Bit, len, Format_Flag, temp);
+    
+}
+
+
+
+
+void FT_VehSpeedCalc(unsigned char spd){
+    unsigned long wTemp;
+
+    wTemp = spd;
+
+    
+}
+
+
+/*zh:*/
+/*------------------------------------------------------------------------------------------------
+ * function name : Bits_Operation
+ * parameter value range : StartByte(0~7)     StartBit(0~7)     Length(1~8)     Value(0~255)
+ * notice : Do not span bytes.
+ * author : zhouhang
+ * date :2022.01.18
+--------------------------------------------------------------------------------------------------*/        
+void Bits_Operation(CAN_message *Message, unsigned char StartByte, unsigned char StartBit, unsigned char Length, unsigned char Value)  /*Do not span bytes*/
+{
+    unsigned char i;
+    
+    for (i = 0; i < Length; i++)
+    {
+        Message->Msg[StartByte] &= (~(1 << (i + StartBit)));
+    }
+
+    Message->Msg[StartByte] |= (Value << StartBit);
+}
+
+/*:zh*/
+
+
+void All_Lamp_TurnOn(void)
+{
+    ;
+}
\ No newline at end of file

知豆检测台/Test_Bench/Api_Sources/GUI_Display.c

+#define  GLOBALS_GUI_DISP
+#include "../App_Headers/includes.h"
+
+
+
+
+

知豆检测台/Test_Bench/Api_Sources/vecter.c

+#include "../App_Headers/includes.h"
+
+extern void _Startup(void);       //ں                                                                            
+     
+#ifndef  VECTF                                                                      
+    #define VECTF   ( void ( *const near )( ) )    
+#endif
+     
+static interrupt void DummyISR(void)                          
+{                                               
+    for(;;);                                       
+}                                                                                            
+       
+#ifndef  VECTF                                                                      
+    #define VECTF   ( void ( *const near )( ) )    
+#endif
+    
+   
+//INTERRUPT VECTORS TABLE
+#pragma CONST_SEG VECTORS_DATA
+
+void near ( * const near _vectab[] )( ) =   
+{
+    VECTF     DummyISR,      //Spurious interrupt
+    VECTF     DummyISR,      //Reserved 
+    VECTF     DummyISR,      //ATD Compare Interrupt
+    VECTF     DummyISR,      //High Temperature Interrupt
+    VECTF     DummyISR,      //Autonomous periodical interrupt (API)
+    VECTF     DummyISR,      //Low-voltage interrupt (LVI) 
+    VECTF     DummyISR,      //PWM emergency shutdown 
+    VECTF     DummyISR,      //Port T 
+    VECTF     DummyISR,      //Reserved 
+    VECTF     DummyISR,      //Reserved 
+    VECTF     DummyISR,      //Reserved 
+    VECTF     Api_Motor_isr,    //Motor Control Timer Overflow                             
+    VECTF     DummyISR,      //Reserved
+    VECTF     DummyISR,      //TIM1 Pulse accumulator input edge
+    VECTF     DummyISR,      //TIM1 Pulse accumulator A overflow
+    VECTF     DummyISR,    //TIM1 timer overflow
+    VECTF     DummyISR,    //TIM1 timer channel 7 
+    VECTF     DummyISR,      //TIM1 timer channel 6 
+    VECTF     DummyISR,      //TIM1 timer channel 5 
+    VECTF     DummyISR,      //TIM1 timer channel 4 
+    VECTF     DummyISR,      //TIM1 timer channel 3 
+    VECTF     DummyISR,      //TIM1 timer channel 2 
+    VECTF     DummyISR,      //TIM1 timer channel 1 
+    VECTF     DummyISR,      //TIM1 timer channel 0
+    VECTF     DummyISR,      //CAN transmit
+    VECTF     Api_CAN_Rev_isr,    //CAN receive
+    VECTF     DummyISR,      //CAN errors 
+    VECTF     DummyISR,      //CAN wake-up 
+    VECTF     DummyISR,      //FLASH
+    VECTF     DummyISR,      //FLASH Fault Detect
+    VECTF     DummyISR,      //Reserved
+    VECTF     DummyISR,      //Reserved
+    VECTF     DummyISR,      //IIC bus
+    VECTF     DummyISR,      //Reserved 
+    VECTF     DummyISR,      //Reserved
+    VECTF     DummyISR,      //CPMU PLL lock 
+    VECTF     DummyISR,      //CPMU Oscillator Noise
+    VECTF     DummyISR,      //Port S 
+    VECTF     DummyISR,      //Port R
+    VECTF     DummyISR,      //Port AD
+    VECTF     DummyISR,      //Reserved
+    VECTF     DummyISR,      //ATD  
+    VECTF     DummyISR,      //Reserved
+    VECTF     Api_SCI_Rev_isr,//SCI 
+    VECTF     DummyISR,      //SPI
+    VECTF     DummyISR,      //TIM0 Pulse accumulator input edge 
+    VECTF     DummyISR,      //TIM0 Pulse accumulator A overflow
+    VECTF     Api_Timer0_isr,    //TIM0 timer overflow    Api_Timer0_isr
+    VECTF     DummyISR,    //TIM0 timer channel 7
+    VECTF     DummyISR,      //TIM0 timer channel 6            
+    VECTF     DummyISR,      //TIM0 timer channel 5 
+    VECTF     DummyISR,      //TIM0 timer channel 4             
+    VECTF     DummyISR,      //TIM0 timer channel 3 
+    VECTF     DummyISR,      //TIM0 timer channel 2             
+    VECTF     DummyISR,      //TIM0 timer channel 1 
+    VECTF     DummyISR,      //TIM0 timer channel 0 
+    VECTF     Api_RTC_isr,      //Real time interrupt 
+    VECTF     DummyISR,      //IRQ
+    VECTF     DummyISR,      //XIRQ
+    VECTF     DummyISR,      //SWI 
+    VECTF     DummyISR,      //Unimplemented instruction trap
+    VECTF     DummyISR,      //COP watchdog reset
+    VECTF     DummyISR,      //Clock monitor reset
+    VECTF     _Startup,      // 0xFFFE:  Reset      
+};
+
+#pragma CONST_SEG DEFAULT

知豆检测台/Test_Bench/App_Headers/API_ATD.h

+
+#ifdef        GLOBALS_API_ATD
+    #define   EXTERN_API_ATD
+   
+#else
+    #define   EXTERN_API_ATD     extern
+#endif
+
+#ifndef API_ATD_H_
+#define API_ATD_H_
+    #define             CHNAL1          1
+    #define             CHNAL2          2
+	  #define             CHNAL3          3
+	  
+    #define             SMP_TIME        0
+    #define             SMP_PRE         16
+    
+  	EXTERN_API_ATD      INT8U           ADCH_SEL;
+  	EXTERN_API_ATD      INT16U          ATD_Time;
+    EXTERN_API_ATD      INT16U          ATD_T3s;
+    	
+    EXTERN_API_ATD      void            API_ATD_init(void);
+  	EXTERN_API_ATD      void            API_GetSensorAD(void);
+#endif /* API_ATD_H_ */

知豆检测台/Test_Bench/App_Headers/API_CAN.h

+
+
+#ifdef        GLOBALS_API_CAN
+    #define   EXTERN_API_CAN
+    
+#else
+    #define   EXTERN_API_CAN     extern
+#endif
+
+#ifndef API_CAN_H_
+#define API_CAN_H_
+    #define     SJW_1Tq                  0
+    #define     SJW_2Tq                  1
+    #define     SJW_3Tq                  2
+    #define     SAMP_1                   0
+    #define     Seg1_11Tq                10
+    #define     Seg1_12Tq                11
+    #define     Seg1_8Tq                 7
+    #define     Seg2_7Tq                 6
+    #define     Seg2_8Tq                 7
+    #define     Seg1_4Tq                 3
+    #define     Seg1_5Tq                 4
+    #define     Seg1_6Tq                 5
+    #define     Seg2_1Tq                 0
+    #define     Seg2_2Tq                 1
+    #define     Seg2_3Tq                 2
+    #define     Seg2_4Tq                 3
+    #define     IDAM_2_32Bit             0
+    #define     IDAM_4_16Bit             1
+    #define     IDHIT0                   0
+    #define     empoty                   0
+    #define     msg_full                 1
+    #define     bit0_mask                1
+    #define     bit1_mask                2
+    #define     bit2_mask                4
+    #define     bit3_mask                8
+    #define     bit4_mask                16
+    #define     bit5_mask                32
+    #define     bit6_mask                64
+    #define     bit7_mask                128
+    //ºê¶¨Òå
+    #define     GET_EXTPGN(id)         (((((((INT32U)id&0xFF0000)>>16) >= 0xF0)?((INT32U)id & 0x00FF00):0)|((INT32U)id & 0x2FF0000)) >> 8)
+    
+    #define     ID138        0x138
+
+    #define     success      1
+    #define     failt        0
+      
+    
+    EXTERN_API_CAN               void    Api_CAN_Init(void);    
+    EXTERN_API_CAN               INT16U  Api_GET_STAND_ID(INT8U *IDR0_Add);
+    EXTERN_API_CAN     interrupt void    Api_CAN_Rev_isr(void); 
+    EXTERN_API_CAN               INT8U   Api_CANSendFrame(CAN_message * CanMessage);
+#endif /* API_CAN_H_ */

知豆检测台/Test_Bench/App_Headers/API_DFlash.h

+
+
+#ifdef        GLOBALS_API_DFLASH
+    #define   EXTERN_API_DFLASH
+    
+#else
+    #define   EXTERN_API_DFLASH     extern
+#endif
+
+#ifndef API_DFLASH_H_
+#define API_DFLASH_H_
+
+    #define   MaxDFlashCommandCounter           0x06
+    #define   MaxDelayTime                      BusClock 
+    #define   RunComplete                       0
+    #define   RunErr                            1
+    #define   RunParameterErr                   2
+    #define   RunOverTimeErr                    3
+    #define   RunErrACCERR                      4
+    #define   RunErrFPVIOL                      5
+    #define   RunErrMGSTAT1                     6
+    #define   RunErrMGSTAT0                     7
+    #define   RunErr                            1
+    #define   WordSize                          0x02
+                                                 //字大小
+    #define   GLOBAL_ADDRESS_DFLASH             0x0000
+                                                 //D Flash全局地址[17:16]
+    #define   DFLASH_BLOCK_START_ADDR           0x004400
+                                                 // D Flash 起始地址
+                                                 
+    #define   DFLASH_VEH_ADDR                   DFLASH_BLOCK_START_ADDR                                                
+    #define   DFLASH_REV_ADDR                   DFLASH_VEH_ADDR + 256                                                
+    #define   DFLASH_TMP_ADDR                   DFLASH_REV_ADDR + 256                                                
+    #define   DFLASH_FUEL_ADDR                  DFLASH_TMP_ADDR + 256
+    #define   DFLASH_RADIO_ADDR                 DFLASH_FUEL_ADDR + 256
+    #define   DFLASH_SERKM_ADDR                 DFLASH_RADIO_ADDR + 256
+    #define   DFLASH_POWER_ADDR                 DFLASH_SERKM_ADDR + 256
+                                                                                                                                                                                                                                                                                                                                                                                                      
+    #define   DFLASH_BLOCK_END_ADDR             0x0053FF
+                                                 // D Flash 结束地址
+    #define   DFLASH_SECTOR_SIZE                0x0100  
+                                                 // 256 字节数
+    #define   DFLASH_ACC_START_ADD              0x004C00
+                                                 //D-Falsh里程累计起始地址
+    #define   DFLASH_ACC_END_ADD                0x004FFF
+                                                 //D-Flash里程累计结束地址
+    #define   DFLASH_MAXIMUM_SIZE               0x00001000  
+                                                 //D Flash 最大尺寸 4 KB
+    #define   DFLASH_ERASE_VERIFY               0x10 
+                                                 //D Flash 擦除验证命令
+    #define   DFLASH_PROGRAM                    0x11  
+                                                 //D Falsh 编程命令
+    #define   DFLASH_ERASE_SECTOR               0x12  
+                                                 //D Flash 擦除命令
+    #define   DFLASH_ERASE_COM_LENGTH           0x01
+                                                 //D Flash 擦除命令长度
+    #define   DFLASH_ERASE_VERIFY_COM_LENGTH    0x02
+                                                 //D Flash 擦除检验命令长度 
+    #define   DFLASH_PROGRAM_COM_LENGTH         0x04
+                                                 //D Flash 最大编程字节长度  
+    #define   MaxProgramByteNumber              0x08
+                                                 //最大编程字节数 
+    #define   DFlashAccSectorEndAdd             0x004F00 
+    #define   DflashAccSectorStartAdd           0x004C00 
+    #define   DFLASH_PROGRAM_OFFSET             0x4000 
+    
+    #define   DFlashAccReadStartAdd             (DFLASH_ACC_START_ADD - DFLASH_PROGRAM_OFFSET)
+    #define   DFlashAccReadEndAdd               (DFLASH_ACC_END_ADD - DFLASH_PROGRAM_OFFSET)
+    #define   DFlashAccBlockNumber              ((DFLASH_ACC_END_ADD - DFLASH_ACC_START_ADD + 1) / DFlashAccBlockLength)
+                                               
+                                              
+    EXTERN_API_DFLASH     void    Api_Flash_Init(void);
+    EXTERN_API_DFLASH     INT8U   Api_Flash_byte_read(INT16U _addr);                                                                                                                                      
+    EXTERN_API_DFLASH     INT8U   Api_DFlashCommSequence(INT8U bCommandCounter);
+    EXTERN_API_DFLASH     INT8U   Api_DFlashEraseSector(INT16U wDestination);
+    EXTERN_API_DFLASH     INT8U   Api_DFalshProgram(INT16U wDest,INT16U wByteNub,INT16U *wSource);
+    EXTERN_API_DFLASH     INT8U   Api_DFlashEraseVerify(INT16U wDestination, INT16U wSize);  
+
+
+
+                             
+#endif /* API_DFLASH_H_ */

知豆检测台/Test_Bench/App_Headers/API_Device_Init.h

+/*
+ * API_Device_Init.h
+ *
+ *  Created on: 2012-3-27
+ *      Author: arno.qi
+ */
+
+#ifdef        GLOBALS_API_DEV
+    #define   EXTERN_API_DEV
+    
+#else
+    #define   EXTERN_API_DEV     extern
+#endif
+
+#ifndef API_DEVICE_INIT_H_
+#define API_DEVICE_INIT_H_
+
+    #define     NormalChip               0x80
+    #define     SpecialChip              0x00
+    #define     InitDIRECT               0          
+    #define     InitIVBR                 0xFF
+    #define     InitCPMUPROT             0x26
+    #define     InitCPMUCLKS             0x87
+    #define     InitCPMUREFDIV           0x40
+    #define     InitCPMUSYNR             0x47 //0X47 4M;  8M 0X43
+    #define     InitCPMUPOSTDIV          0x00
+    #define     InitCPMUPLL              0
+    #define     InitPUCR                 0x40
+    #define     InitCPMUCOP              0x07 
+    #define     Enable                   1
+    #define     Disable                  0
+    #define     WaitRun                  0
+    #define     null                     0
+    #define     one                      1
+    #define     ClearFlag                1
+    #define     clear                    0
+    #define     True                     1
+    #define     false                    0
+    #define     PushDown                 0
+    #define     UpSpring                 1
+    #define     BusClock                 32000000 //16777216
+    #define     SafetyVeh                10 *64
+    #define     Prio1                    1 
+    #define     Prio2                    2  
+    #define     Prio3                    3  
+    #define     Prio4                    4  
+    #define     Prio5                    5   
+    #define     Prio6                    6 
+    #define     Prio7                    7          
+    
+    #define     PushDown                 0
+    #define     UpSpring                 1 
+    
+    #define     Auto                     1 
+     
+    #define     pSTB                     PTP_PTP1 
+   
+    /*#define     pSBRInput                PT1AD_PT1AD2  //Êó±ê-    
+    #define     pSBLInput                PT1AD_PT1AD1  //Êó±ê+
+    
+    
+    #define     P22_V7_BY1               PTV_PTV7
+    #define     P21_V6_BY2               PTV_PTV6
+    #define     P20_V5_OMID              PTV_PTV5
+    #define     P19_V4_OFUll             PTV_PTV4
+    #define     P16_V3_OPOW              PTV_PTV3
+    #define     P15_V2_OP1               PTV_PTV2
+    #define     P14_V1_OP2               PTV_PTV1
+    #define     P13_V0_OP3               PTV_PTV0
+    
+    #define     P12_U7_OP4               PTU_PTU7
+    #define     P11_U6_OP5               PTU_PTU6
+    #define     P10_U5_OP6               PTU_PTU5
+    #define     P9_U4_ON1                PTU_PTU4
+    #define     P6_U3_ON2                PTU_PTU3
+    #define     P5_U2_ON3                PTU_PTU2
+    
+    #define     P99_AD6_ON4              PT1AD_PT1AD6
+    #define     P98_AD5_ON5              PT1AD_PT1AD5
+    #define     P97_AD4_ON6              PT1AD_PT1AD4
+
+    #define     P96_AD3_IPOW             PT1AD_PT1AD3*/
+    
+    /*******************************************************
+    * INPUT
+    *******************************************************/
+    #define     pSB1                     PT1AD_PT1AD1
+    #define     pSB2                     PT1AD_PT1AD2
+    
+
+    #define     LED_P1                   1
+    #define     LED_P2                   2
+    #define     LED_P3                   3
+    #define     LED_P4                   4
+    #define     LED_P5                   5
+    #define     LED_P6                   6
+    #define     Full                     7
+    #define     Mid                      8
+    
+    #define     LED_N1                   11
+    #define     LED_N2                   12
+    #define     LED_N3                   13
+    #define     LED_N4                   14
+    #define     LED_N5                   15
+    #define     LED_N6                   16
+    
+    #define     LED_all                  20
+    
+    
+    
+    
+    
+
+                     
+    EXTERN_API_DEV     void    Api_Sys_Init(void);
+    EXTERN_API_DEV     void    Api_Clock_Init(void);
+    EXTERN_API_DEV     void    Api_IO_init(void);
+    
+#endif /* API_DEVICE_INIT_H_ */

知豆检测台/Test_Bench/App_Headers/API_LCD.h

+
+#ifdef        GLOBALS_API_LCD
+    #define   EXTERN_API_LCD
+    
+   const       INT8U    Matrix1[]=
+   { 
+      //0     1    2    3    4    5    6    7    8    9  
+       0xd7,0x06,0xe3,0xa7,0x36,0xb5,0xf5,0x07,0xf7,0xb7
+   }; 
+   
+   const       INT8U    Matrix2[]=
+   { 
+      //0     1    2    3    4    5    6    7    8    9  
+       0xeb,0x0a,0xc7,0x8f,0x2e,0xad,0xed,0x0b,0xef,0xaf
+   };
+   
+   const       INT8U    Matrix3[]=
+   { 
+      //0     1    2    3    4    5    6    7    8    9  
+       0x5f,0x06,0x6b,0x2f,0x36,0x3d,0x7d,0x07,0x7f,0x3f
+   };
+           
+#else
+    #define   EXTERN_API_LCD     extern
+#endif
+#ifndef API_LCD_H_
+#define API_LCD_H_
+
+     #define   Duty4                   0                   // 1/2 Duty
+     #define   IRCCLK_1M               1                   // IRCCLK 1M
+    
+       
+     EXTERN_API_LCD       void         Api_LCD_Init(void);
+     EXTERN_API_LCD       void         Api_LCD_Display(void);
+
+
+#endif /* API_LCD_H_ */

知豆检测台/Test_Bench/App_Headers/API_RTC.h

+
+#ifdef        GLOBALS_API_RTC
+    #define   EXTERN_API_RTC
+
+
+#else
+    #define   EXTERN_API_RTC     extern
+#endif
+#ifndef API_RTC_H_
+#define API_RTC_H_
+
+        #define           T_1ms                 1
+        #define           T_10ms                10*T_1ms
+        #define           T_20ms                20*T_1ms
+        #define           T_25ms                25*T_1ms
+        #define           T_50ms                50 
+        #define           T_100ms               100           
+        #define           T_1s                  10*T_100ms  
+        #define           T_200ms               2*T_100ms
+        #define           T_300ms               3*T_100ms
+        #define           T_400ms               4*T_100ms
+        #define           T_500ms               5*T_100ms
+        #define           T_600ms               6*T_100ms
+        #define           T_700ms               7*T_100ms
+        #define           T_800ms               8*T_100ms
+        #define           T_2s                  2*T_1s
+        #define           T_3s                  3*T_1s
+        #define           T_3_5s                3*T_1s
+        #define           T_4s                  4*T_1s
+        #define           T_5s                  5*T_1s
+        #define           T_6s                  6*T_1s
+        #define           T_2_5s                2*T_1s
+        #define           T_8s                  8*T_1s
+        #define           T_9s                  9*T_1s
+        #define           T_10s                 10*T_1s
+   
+        
+        EXTERN_API_RTC    interrupt   void      Api_RTC_isr(void);
+        EXTERN_API_RTC              void        Api_SetTimer7(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver7(ClockType *T);         
+        EXTERN_API_RTC              void        Api_SetTimer6(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver6(ClockType *T);  
+        EXTERN_API_RTC              void        Api_SetTimer5(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver5(ClockType *T); 
+        EXTERN_API_RTC              void        Api_SetTimer4(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver4(ClockType *T);  
+        EXTERN_API_RTC              void        Api_SetTimer3(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver3(ClockType *T);  
+        EXTERN_API_RTC              void        Api_SetTimer2(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver2(ClockType *T);
+        EXTERN_API_RTC              void        Api_SetTimer1(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver1(ClockType *T);
+        EXTERN_API_RTC              void        Api_SetTimer0(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_TimerOver0(ClockType *T);
+        EXTERN_API_RTC              void        Api_SetAutoTimer(INT16U Second,ClockType *T);
+        EXTERN_API_RTC              INT8U       Api_AutoTimerOver(ClockType *T);
+
+#endif /* API_RTC_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/API_SCI.h

+
+#ifdef        GLOBALS_API_SCI
+    #define   EXTERN_API_SCI
+   
+#else
+    #define   EXTERN_API_SCI     extern
+#endif
+
+#ifndef API_SCI_H_
+#define API_SCI_H_
+	#define             CH1          1
+	#define             CH2          2
+	#define             baud_9600    208
+	#define             baud_19200   104
+	#define             baud_38400   52	
+	#define             baud_115200  17
+	
+	#define             div4       3
+	EXTERN_API_SCI     void            Api_SCI_Init(void);
+	EXTERN_API_SCI     void            Api_SCI_Trans_Byte(INT8U data);
+	EXTERN_API_SCI     void            Api_SCI_Trans_Bytes(INT8U *pStr, INT8U length);
+	EXTERN_API_SCI     interrupt void  Api_SCI_Rev_isr(void);
+	
+#endif /* API_SCI_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/API_TPM.h

+
+#ifdef        GLOBALS_API_TPM
+    #define   EXTERN_API_TPM
+   
+#else
+    #define   EXTERN_API_TPM     extern
+#endif
+
+#ifndef API_TPM_H_
+#define API_TPM_H_
+  
+        #define           TPM_DIV4              2
+        #define           TPM_DIV2              1
+        #define           TPM_DIV1              0
+        #define           TPM_DIV128            7
+
+  
+        #define           TT_10ms                 5
+        #define           TT_15ms                 7
+        #define           TT_30ms                 TT_15ms *2
+        #define           TT_100ms                49
+        #define           TT_200ms                96 
+        #define           TT_120ms                58 
+        #define           TT_180ms                87 
+        #define           TT_240ms                117 
+        #define           TT_250ms                122 
+        #define           TT_340ms                165
+        #define           TT_500ms                TT_100ms *5
+        #define           TT_750ms                367
+        #define           TT_1s                   490
+        #define           TT_1_5s                 735
+        #define           TT_2s                   980
+        #define           TT_2_5s                 1225
+        #define           TT_3s                   1465
+        #define           TT_6s                   2930
+        #define           TT_8s                   3186
+  
+        EXTERN_API_TPM              void        Api_Timer0_Init(INT8U TPM_DIV);
+        EXTERN_API_TPM              void        Api_Timer1_Init(INT8U TPM_DIV);
+        EXTERN_API_TPM              void        Api_Motor_Init(void);
+        EXTERN_API_TPM    interrupt void        Api_Timer0_isr(void);
+        EXTERN_API_TPM    interrupt void        API_Timer1_isr(void);
+        EXTERN_API_TPM    interrupt void        Api_Motor_isr(void);
+
+  
+#endif /* API_TPM_H_ */

知豆检测台/Test_Bench/App_Headers/APP_CAN.h

+#ifdef        GLOBALS_APP_CAN
+    #define   EXTERN_APP_CAN
+   
+   
+   
+   
+              
+#else
+    #define   EXTERN_APP_CAN     extern
+
+#endif
+
+#ifndef APP_CAN_H_
+#define APP_CAN_H_
+
+       
+       EXTERN_APP_CAN  void Format_CAN_Msg();
+       EXTERN_APP_CAN  void App_Msg_Copy(CAN_message * CanMessage,INT16U* data);   
+       EXTERN_APP_CAN  void App_Can_Proc(void);
+       EXTERN_APP_CAN  void Set_CAN_CRC(CAN_message * CanMessage);
+       EXTERN_APP_CAN  void Disable_CAN_Tx(void);
+
+
+#endif /* APP_CAN_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/APP_DFlash.h

+#ifdef        GLOBALS_APP_DFLASH
+    #define   EXTERN_APP_DFLASH
+   
+#else
+    #define   EXTERN_APP_DFLASH     extern
+#endif
+
+#ifndef APP_DFLASH_H_
+#define APP_DFLASH_H_
+
+      #define   AccDataFlag                     0x55
+      
+      #define   PAGE_LEN                        256 
+
+
+      #define   WaitOverTime                   50000
+
+      EXTERN_APP_DFLASH        void App_CopyRam(INT8U *Dp,INT8U *Sp,INT8U Nub);
+      EXTERN_APP_DFLASH        void App_Read_EE_Memory(INT16U ReadAddr,INT8U *DestStr,INT16U len);
+ 
+      
+#endif /* APP_DFLASH_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/APP_Data_Process.h

+/*
+ * APP_Data_Process.h
+ *
+ *  Created on: 2012-3-27
+ *      Author: qitiancun
+ */
+ 
+
+    
+#ifdef        GLOBALS_APP_PROCESS
+    #define   EXTERN_APP_PROCESS
+   
+#else
+    #define   EXTERN_APP_PROCESS     extern
+#endif
+
+#ifndef APP_DATA_PROCESS_H_
+#define APP_DATA_PROCESS_H_
+
+    
+               
+
+   
+    #define                  CheckFlag            0x55
+    
+
+    EXTERN_APP_PROCESS        void      App_Load_Data(void);
+    EXTERN_APP_PROCESS        void      App_State_Init(void);
+    EXTERN_APP_PROCESS        INT8U     App_CreateCheckSun(INT8U *pData,INT8U checkbyte,INT8U len);
+
+    EXTERN_APP_PROCESS void UDS_Receive_Main(unsigned char *buf);
+    EXTERN_APP_PROCESS void UDS_Service_Main(void);
+#endif /* APP_DATA_PROCESS_H_ */

知豆检测台/Test_Bench/App_Headers/APP_SCI.h

+
+#ifdef        GLOBALS_APP_SCI
+    #define   EXTERN_APP_SCI
+   
+#else
+    #define   EXTERN_APP_SCI     extern
+#endif
+
+#ifndef APP_SCI_H_
+#define APP_SCI_H_
+
+
+     
+     
+    #define     VehType                  1
+    #define     RevType                  2  	
+    #define     TmpType                  3
+    #define     FueType                  4
+    #define     VehStepType              5
+    #define     RevStepType              6
+    #define     TmpStepType              7
+    #define     FuelStepType             8
+    #define     RadioType                11
+    #define     AccType                  13
+    #define     PowerType                14
+    #define     SerType                  15    
+    #define     DownLoad                 1
+    #define     UpLoad                   2
+    #define     SCI_LEN                  43 
+         
+     EXTERN_APP_SCI     void        App_SCI_Proc(void);
+          
+     
+
+
+#endif /* APP_SCI_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/APP_Test.h

+
+
+#ifdef        GLOBALS_APP_TEST
+    #define   EXTERN_APP_TEST
+    
+#else
+    #define   EXTERN_APP_TEST     extern
+#endif
+
+#ifndef APP_TEDT_H_
+#define APP_TEDT_H_
+
+#define Motorola                0
+#define Intel                   1
+
+#define Offset_Minus            0
+#define Offset_Plus             1
+
+#define Value_Minus             0
+#define Value_Plus              1
+
+typedef struct{
+    unsigned int val;
+    unsigned char fval;
+}s_CurValue;
+
+typedef struct{
+    CAN_message *canMsg;
+    unsigned char StartByte;
+    unsigned char StartBit;
+    unsigned char SignalLen;
+    unsigned int  Offset;
+    unsigned char fOffset;
+    unsigned int Factor_1;/*Denominator of Resolution*/  /*精度的分母*/
+    unsigned int Factor_2;/*Numerator of Resolution*/    /*精度的分子*/
+    s_CurValue *CurValue; 
+    unsigned char fFormat;
+}s_CAN_List;
+
+enum
+{
+    ENUM_VSpeed          = 0,//车速
+    ENUM_Water          ,
+    CAN_List_Num        ,
+};
+                                                                                    
+EXTERN_APP_TEST volatile s_CurValue CurValueStr[CAN_List_Num];
+
+static const s_CAN_List CAN_List[] = 
+{
+   {&CanMsg_330, 1, 0, 13,     0,  Offset_Plus ,  100000,    5625, &CurValueStr[ENUM_VSpeed         ], Motorola},
+   {&CanMsg_360, 1, 0, 8,     48,  Offset_Minus,  100,    75, &CurValueStr[ENUM_Water         ], Motorola},
+
+};
+
+
+
+
+
+EXTERN_APP_TEST             void                APP_Button_Proc(void);
+EXTERN_APP_TEST             void                Message_Value_Calculate(s_CAN_List list);
+
+void Bits_Operation(CAN_message *Message, unsigned char StartByte, unsigned char StartBit, unsigned char Length, unsigned char Value);  /*Do not span bytes*/
+
+
+
+#endif /* API_CAN_H_ */

知豆检测台/Test_Bench/App_Headers/GUI_Display.h

+/*
+ * GUI_Display.h
+ *
+ *  Created on: 2012-3-27
+ *      Author: arno.qi
+ */
+#ifdef        GLOBALS_GUI_DISP
+    #define   EXTERN_GUI_DISP
+
+
+#else
+    #define   EXTERN_GUI_DISP     extern
+#endif
+#ifndef GUI_DISP_H_
+#define GUI_DISP_H_
+
+     
+
+#endif /* GUI_DISP_H_ */
\ No newline at end of file

知豆检测台/Test_Bench/App_Headers/Globals_Var.h

+#ifdef        GLOBALS_VARIABLE
+    #define   EXTERN_VAR
+    
+#else
+    #define   EXTERN_VAR     extern
+    
+#endif
+
+#ifndef GLOBALS_VAR_H_
+#define GLOBALS_VAR_H_ 
+
+
+
+    
+
+    EXTERN_VAR  INT8U  Flash_1Hz;
+
+
+
+
+    EXTERN_VAR     volatile  INT8U               SCIRV[43];
+    EXTERN_VAR     volatile  INT8U               bReturn;         
+    EXTERN_VAR     volatile  INT16U              FlashCommandArray[MaxDFlashCommandCounter];       
+    EXTERN_VAR     volatile  ClockType           Clock;
+    EXTERN_VAR     volatile  INT8U               rvcnt;     
+    EXTERN_VAR     volatile  CarFlagType         CarFlag;
+    EXTERN_VAR     volatile  INT16U              BusOffTime; 
+    /*EXTERN_VAR     volatile  CanMsg              Msg;
+    EXTERN_VAR     volatile  CanMsg              Msg1;
+    EXTERN_VAR     volatile  CanMsg              Msg2;*/
+    EXTERN_VAR     volatile  TwoINT8U            TwoByte;
+
+    EXTERN_VAR     volatile  EcuType             Ecu;
+    EXTERN_VAR     volatile  SciFrameType        SciFrame;
+    EXTERN_VAR     volatile  RadioMeter          Radio;
+    EXTERN_VAR     volatile  INT32U              wTemp;
+    EXTERN_VAR     volatile  INT8U               check;
+    EXTERN_VAR     volatile  INT16U              VehFre;
+    EXTERN_VAR     volatile  INT8U               RunStep;
+    EXTERN_VAR     volatile  KeyType             Key;
+    
+    EXTERN_VAR     volatile  INT8U               step_cycle;
+    
+    EXTERN_VAR     volatile  INT8U               LCDFP4BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP5BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP6BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP7BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP8BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP9BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP10BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP11BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP12BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP13BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP14BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP15BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP16BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP17BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP18BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP19BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP20BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP21BP;
+    EXTERN_VAR     volatile  INT8U               LCDFP22BP;    
+    
+    EXTERN_VAR     volatile  INT32U              TEST;
+    
+    /*EXTERN_VAR     CAN_message                  CanMessageID092;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID0A0;            //50
+    EXTERN_VAR     CAN_message                  CanMessageID0A1;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID0A4;            //20
+    EXTERN_VAR     CAN_message                  CanMessageID100;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID102;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID104;            //25
+    EXTERN_VAR     CAN_message                  CanMessageID108;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID10A;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID112;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID116;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID139;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID141;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID144;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID2F1;            //50
+    EXTERN_VAR     CAN_message                  CanMessageID150;            //event
+    EXTERN_VAR     CAN_message                  CanMessageID200;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID290;            //60
+    EXTERN_VAR     CAN_message                  CanMessageID294;            //event
+    EXTERN_VAR     CAN_message                  CanMessageID2F0;            //1000
+    EXTERN_VAR     CAN_message                  CanMessageID316;            //50
+    EXTERN_VAR     CAN_message                  CanMessageID3EF;            //1000
+    EXTERN_VAR     CAN_message                  CanMessageID0B2;            //10
+    EXTERN_VAR     CAN_message                  CanMessageID10E;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID071;            //event
+    EXTERN_VAR     CAN_message                  CanMessageID220;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID20A;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID387;            //100
+    EXTERN_VAR     CAN_message                  CanMessageID206;            //100*/
+    
+    /*EXTERN_VAR     CAN_message                  CanMessageID0CF80AF0;
+    EXTERN_VAR     CAN_message                  CanMessageID0CF80BF0;
+    EXTERN_VAR     CAN_message                  CanMessageID0CF814F3;
+    EXTERN_VAR     CAN_message                  CanMessageID18F815F3;
+    EXTERN_VAR     CAN_message                  CanMessageID18F816F3;
+    EXTERN_VAR     CAN_message                  CanMessageID0CF81EA7;
+    EXTERN_VAR     CAN_message                  CanMessageID0CF81FA7;
+    EXTERN_VAR     CAN_message                  CanMessageID18F820A7;
+    EXTERN_VAR     CAN_message                  CanMessageID18F8058F;
+    EXTERN_VAR     CAN_message                  CanMessageID18F8068F;*/
+    
+    
+    
+    /*zh:*/
+    /*CS08 test*/
+    EXTERN_VAR      CAN_message                 CanMessageID0CFF7F03;
+    EXTERN_VAR      CAN_message                 CanMsg_330;
+    EXTERN_VAR      CAN_message                 CanMsg_360;
+    EXTERN_VAR      CAN_message                 CanMsg_385;
+
+
+    extern      CAN_message                 CanMsg_330;
+    extern      CAN_message                 CanMsg_360;
+    extern      CAN_message                 CanMsg_385;
+
+    
+    
+    /**/
+    /*:zh*/
+
+
+
+    
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    
+
+
+
+    
+    EXTERN_VAR     Max_Page                     MaxPage;
+    EXTERN_VAR     INT8U                        Auto_First;
+    
+    EXTERN_VAR      INT8U                       RT_10ms_En;
+    EXTERN_VAR      INT8U                       RT_20ms_En;
+    EXTERN_VAR      INT8U                       RT_25ms_En;
+    EXTERN_VAR      INT8U                       RT_50ms_En;
+    EXTERN_VAR      INT8U                       RT_60ms_En;
+    EXTERN_VAR      INT8U                       RT_100ms_En;
+    EXTERN_VAR      INT8U                       RT_200ms_En;
+    EXTERN_VAR      INT8U                       RT_500ms_En;
+    EXTERN_VAR      INT8U                       RT_1s_En;
+
+    EXTERN_VAR      INT8U                       CurVehSpeed;
+
+    EXTERN_VAR volatile INT32U seed1;
+    EXTERN_VAR volatile INT32U seed2;
+    EXTERN_VAR volatile INT32U seed3;
+    EXTERN_VAR volatile INT32U seed4;
+    EXTERN_VAR volatile INT32U dwSeed1;
+    EXTERN_VAR volatile INT32U dwSeed2;
+    EXTERN_VAR volatile INT32U dwSeed3;
+    EXTERN_VAR volatile INT32U dwSeed4;
+    EXTERN_VAR volatile INT32U dwKey1;
+    EXTERN_VAR volatile INT32U dwKey2;
+    EXTERN_VAR volatile INT32U dwKey3;
+    EXTERN_VAR volatile INT32U dwKey4;
+    EXTERN_VAR volatile INT32U aaaa;
+    EXTERN_VAR volatile INT32U bbbb;
+    EXTERN_VAR volatile INT32U cccc;
+    EXTERN_VAR volatile INT32U dddd;
+    EXTERN_VAR volatile INT32U CalcKey;
+    EXTERN_VAR volatile INT32U GetSeed;
+
+    EXTERN_VAR volatile INT8U EOLMode;
+    EXTERN_VAR volatile INT8U EOLStep;
+    EXTERN_VAR volatile INT8U EOLError;
+
+#endif /* GLOBALS_VAR_H_ */

知豆检测台/Test_Bench/App_Headers/Var_Type.h

+/*
+ * Var_Type.h
+ *
+ *  Created on: 2012-3-23
+ *      Author: qitiancun
+ */
+
+#ifndef VAR_TYPE_H_
+#define VAR_TYPE_H_
+
+    #define             ADEveLen        10
+    typedef             unsigned char   INT8U;
+    typedef   volatile  unsigned char   VINT8U;
+    typedef             unsigned int    INT16U;
+    typedef   volatile  unsigned int    VINT16U;
+    typedef             unsigned long   INT32U;
+    
+    typedef struct
+    {
+        INT8U ProceF;  //处理标志位
+        INT32U id;
+        INT8U Len;
+        INT8U Data[8];
+    }CanMsg;
+
+    
+    
+    typedef union 
+    {
+         struct
+         {
+              //1 word
+              INT32U     EngRunAtv :1;
+              INT32U     EngSpdStat:2;
+              INT32U     EngCltTmpV:1;
+              INT32U     EngCltTmp :1;
+              INT32U     FlLvlPctV :1;              
+              INT32U     VehSpdAvgDrvnV :1;              
+              INT32U     ABSAtv         :1;
+              INT32U     ABSMlfIO       :1;
+              INT32U     EBDMlfIO       :1;
+              INT32U     IgnKyInstAtv   :1;              
+              INT32U     IgnKyPstn      :2;
+              INT32U     HhBmIO         :1;
+              INT32U     LwBmIO         :1;
+              INT32U     FtFgLtIO       :1;
+              //2 word
+              INT32U     PnLgtAtv       :1;
+              INT32U     RrFgLtIO       :1;
+              INT32U     RtTrnLmpAtv    :1;
+              INT32U     LftTrnLmpAtv   :1;              
+              INT32U     TDLckSwAtv     :1;
+              INT32U     RSDOpnSwAtv    :1;
+              INT32U     PDOpnSwAtv     :1;
+              INT32U     DDOpnSwAtv     :1;              
+              INT32U     EPSIO          :1;
+              INT32U     NetCtlKeep     :1;
+              INT32U     NetDataKeep    :1;
+              INT32U     CanDataSend:1;
+              INT32U     Reserved2:1;
+              INT32U     Reserved3:1;
+              INT32U     Reserved4:1;
+              INT32U     Reserved5:1;
+              
+              //3 word
+              INT32U     MotorReset:1;
+              INT32U     MotorInit:1;
+              INT32U     Safety:1;  
+              INT32U     RunStar  :1;
+              INT32U     TmpFlash:1;
+              INT32U     CanState:1;
+              INT32U     Led:1;
+              INT32U     DoorOpen:1;
+              INT32U     KeyEn:1;
+              INT32U     LampEn:1;
+              INT32U     AccKmValid:1;
+              INT32U     Perilous:1;   //危险信号
+              INT32U     RS232RV_Full:1;
+              INT32U     ClearAcc:1;
+              INT32U     Reserved20:1;
+              INT32U     Reserved21:1;
+              //4 word
+              INT32U     Reserved22:1;
+              INT32U     Reserved23:1;
+              INT32U     Reserved24:1;
+              INT32U     Reserved25:1;
+              INT32U     Reserved26:1;
+              INT32U     Reserved27:1;
+              INT32U     Reserved28:1;
+              INT32U     Reserved29:1;
+              INT32U     Reserved30:1;
+              INT32U     Reserved31:1;
+              INT32U     Reserved32:1;
+              INT32U     Reserved33:1;
+              INT32U     Reserved34:1;
+              INT32U     Reserved35:1;
+              INT32U     Reserved36:1;
+              INT32U     Reserved37:1;
+         }FlagBits;
+         INT32U FlagArry[3];
+    }CarFlagType;
+        
+    typedef union
+    {
+         struct
+         {
+              INT8U     bit0:1;
+              INT8U     bit1:1;
+              INT8U     bit2:1;
+              INT8U     bit3:1;
+              INT8U     bit4:1;
+              INT8U     bit5:1;
+              INT8U     bit6:1;
+              INT8U     bit7:1;
+              INT8U     bit8:1;
+              INT8U     bit9:1;
+              INT8U     bit10:1;
+              INT8U     bit11:1;
+              INT8U     bit12:1;
+              INT8U     bit13:1;
+              INT8U     bit14:1;
+              INT8U     bit15:1;
+         }bits;
+         INT16U w;
+    }WordBit;
+
+ 
+    
+    typedef union 
+    {
+        struct
+        {
+            INT16U d16H;
+            INT16U d16L; 
+        }dw;
+        INT32U dw32;
+    }ULONG;
+
+    typedef union 
+    {
+        struct
+        {
+            INT8U d8H;
+            INT8U d8L; 
+        }bytes;
+        INT16U int16u;
+    }TwoINT8U;
+    
+    typedef struct
+    {
+         INT8U     bDat[256];
+         INT16U    wSectorStartAdd;
+         INT16U    wBlockAdd;
+    }tDFlashBuff;
+    
+    typedef struct
+    {
+         INT8U    Col;
+         INT16U   isFlash;  //是否闪烁
+         INT8U    FlashEn;  //闪烁使能
+         INT8U    TEnable7;
+         INT16U   OverTime7;    //定时极限
+         INT16U   Time7;          
+         INT8U    TEnable6;
+         INT16U   OverTime6;    //定时极限
+         INT16U   Time6;         
+         INT8U    TEnable5;
+         INT16U   OverTime5;    //定时极限
+         INT16U   Time5;
+         INT8U    TEnable4;
+         INT16U   OverTime4;    //定时极限
+         INT16U   Time4;         
+         INT8U    TEnable3;
+         INT16U   OverTime3;    //定时极限
+         INT16U   Time3;
+         INT8U    TEnable2;
+         INT16U   OverTime2;    //定时极限
+         INT16U   Time2;
+         INT8U    TEnable1;
+         INT16U   OverTime1;    //定时极限
+         INT16U   Time1;  
+         INT8U    TEnable0;
+         INT16U   OverTime0;    //定时极限
+         INT16U   Time0;  
+         
+         INT8U    AutoEnable;
+         INT16U   OverAutoTime;    //定时极限
+         INT16U   AutoTime;
+              
+         INT8U    HalfSeconds; //1/10秒             
+         INT8U    Seconds;
+         INT8U    Minutes;
+         INT8U    Hours;
+    }ClockType;
+
+    typedef union 
+    {
+        INT16U duty;
+        INT16U cycle;
+        INT16U time;
+    }EcuType; 
+     
+   	typedef struct
+  	{
+  		INT8U  Frame_Head[2];      //数据帧头
+  		INT8U  Frame_Check;     //校验字
+  		INT8U  Frame_Type;      //数据帧类型
+  		INT8U  Dir;
+  		INT8U  Bak2;
+  		INT8U  Frame_Len;
+  		INT8U  Frame_Data[33];
+  		INT8U  Frame_CheckSun;
+  		INT8U  Frame_END[2];
+  	}SciFrameType;
+    typedef struct  //                          
+    {
+        INT8U       bFlag;
+        INT16U      VehRadio;    //
+        INT16U      VehNum;    //
+        INT16U      RevRadio;    //
+        INT8U       bCheckSun;      
+    }RadioMeter;
+      
+    typedef struct                             
+    {
+		    INT16U         PushTime_1;
+		    INT16U         PushTime_2;
+		    INT8U          CAN_Step;
+		    INT8U          StepAuto;
+		    INT8U          CheckDispOk;
+    }KeyType; 
+    
+    
+    typedef struct 
+    {
+        INT32U  ID;
+        INT8U   Length;
+        INT8U   ID_EN;
+        INT8U   Msg[8];       
+    }CAN_message; 
+    
+    typedef struct{
+        INT8U   Led;
+        INT8U   Trip;
+        INT8U   WF;
+        INT8U   Radar;
+    }Max_Page;
+          	           
+#endif /* VAR_TYPE_H_ */

知豆检测台/Test_Bench/App_Headers/includes.h

+/*
+ * includes.h
+ *
+ *  Created on: 2012-3-21
+ *      Author: qitiancun
+ */
+
+#ifndef _INCLUDES_H_
+#define _INCLUDES_H_
+    #include "hidef.h"      /* common defines and macros */
+    #include "derivative.h"      /* derivative-specific definitions */
+    #include "mc9s12hy64.h"
+    
+    #include "../App_Headers/Var_Type.h" 
+    //
+    #include "../App_Headers/API_Device_Init.h"  
+    #include "../App_Headers/API_DFlash.h"
+    #include "../App_Headers/API_CAN.h" 
+    #include "../App_Headers/API_TPM.h"
+    #include "../App_Headers/API_SCI.h" 
+
+    #include "../App_Headers/API_RTC.h"
+    #include "../App_Headers/API_LCD.h"  
+
+    //Ӧò
+    #include "../App_Headers/Globals_Var.h"
+    #include "../App_Headers/APP_CAN.h"
+    #include "../App_Headers/APP_DFlash.h"
+    #include "../App_Headers/APP_Data_Process.h"
+    #include "../App_Headers/APP_SCI.h" 
+    #include "../App_Headers/APP_Test.h"
+
+    //GUI   
+    #include "../App_Headers/GUI_Display.h"        
+#endif /* _INCLUDES_H_ */

知豆检测台/Test_Bench/C_Layout.hwl

+OPEN source 0 0 60 39
+Source < attributes TOOLTIP on,TOOLTIP_FORMAT signed,TOOLTIP_MODE details,FREEZE off,MARKS off
+OPEN assembly 60 0 40 31
+Assembly < attributes ADR on,CODE off,ABSADR on,SYMB off,FORMAT Auto,FREEZE off,TOPPC 0xC054
+OPEN procedure 0 39 60 17
+Procedure < attributes VALUES on,TYPES off
+OPEN register 60 31 40 25
+Register < attributes FORMAT AUTO,COMPLEMENT None
+OPEN memory 60 56 40 22
+Memory < attributes FORMAT hex,COMPLEMENT None,WORD 1,ASC on,ADR on,MODE automatic,UPDATERATE 10,ADDRESS 0x80
+OPEN data 0 56 60 22
+Data:1 < attributes SCOPE global,COMPLEMENT None,FORMAT Symb,MODE automatic,SORT NotSort,UPDATERATE 10,NAMEWIDTH 16
+OPEN data 0 32 60 68
+Data:2 < attributes SCOPE local,COMPLEMENT None,FORMAT Symb,MODE periodical,SORT NotSort,UPDATERATE 1,NAMEWIDTH 16
+OPEN command 60 78 40 22
+Command < attributes CACHESIZE 1000
+bckcolor 50331647
+font 'Courier New' 9 BLACK
+AUTOSIZE on
+ACTIVATE "Command" "Procedure" "Data:1" "Register" "Assembly" "Memory" "Data:2" "Source"

知豆检测台/Test_Bench/CyclonePro_USB.ini

+[STARTUP]
+CPUTARGETTYPE=0
+USE_CYCLONEPRO_RELAYS=1
+CyclonePro_poweroffonexit=0
+CyclonePro_currentvoltage=255
+CyclonePro_PowerDownDelay=250
+CyclonePro_PowerUpDelay=250
+RESET_DELAY=0
+PORT=101
+interface_selection=4
+SHOWDIALOG=0
+IO_DELAY_SET=0
+frequency_has_changed_old_io_delay_cnt=0
+IO_DELAY_CNT=0
+PCI_DELAY=0
+
+
+
+
+
+[Environment Variables]
+GENPATH={Project}Sources;{Compiler}lib\hc12c\src;{Compiler}lib\hc12c\include;{Compiler}lib\hc12c\lib;{Compiler}lib\xgatec\src;{Compiler}lib\xgatec\include;{Compiler}lib\xgatec\lib
+LIBPATH={Compiler}lib\hc12c\include;{Compiler}lib\xgatec\include
+OBJPATH={Project}bin
+TEXTPATH={Project}bin
+ABSPATH={Project}bin
+
+[HI-WAVE]
+Target=icd12
+Layout=C_layout.hwl
+LoadDialogOptions=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+CPU=HC12
+MainFrame=0,1,-1,-1,-1,-1,25,25,1050,551
+TOOLBAR=57600 57601 32795 0 57635 57634 57637 0 57671 57669 0 32777 32776 32782 32780 32781 32778 0 32806
+
+
+
+[HC12MultilinkCyclonePro_GDI_SETTINGS]
+CMDFILE0=CMDFILE STARTUP ON ".\cmd\CyclonePro_USB_startup.cmd"
+CMDFILE1=CMDFILE RESET ON ".\cmd\CyclonePro_USB_reset.cmd"
+CMDFILE2=CMDFILE PRELOAD ON ".\cmd\CyclonePro_USB_preload.cmd"
+CMDFILE3=CMDFILE POSTLOAD ON ".\cmd\CyclonePro_USB_postload.cmd"
+CMDFILE4=CMDFILE VPPON ON ".\cmd\CyclonePro_USB_vppon.cmd"
+CMDFILE5=CMDFILE VPPOFF ON ".\cmd\CyclonePro_USB_vppoff.cmd"
+CMDFILE6=CMDFILE UNSECURE ON ".\cmd\CyclonePro_USB_erase_unsecure_hcs12p.cmd"
+MCUID=0x02F2
+NV_PARAMETER_FILE=
+NV_SAVE_WSP=0
+NV_AUTO_ID=1
+
+
+
+
+[ICD12]
+COMSETTINGS=SETCOMM DRIVER NOPROTOCOL NOPERIODICAL
+SETCLKSW=0
+HOTPLUGGING=0
+DETECTRUNNING=0
+RESYNCONCOPRESET=0
+BDMAutoSpeed=1
+BDMClockSpeed=0
+HIGHIODELAYCONSTFORPLL=40
+
+[PORT]
+IP=

知豆检测台/Test_Bench/FC-2-检验.txt

+CAN_FILE	[文件标识不可改动]				
+TBEGAIN		[开始标识不可改动]
+
+
+
+
+
+T=1000ms	[组标识]
+150  068  00 00 00 00 00 00 00 00       
+150  268  00 00 00 00 00 00 00 00
+
+
+T=1000ms	[组标识]
+20  288  81  00  00  00         [水温60]		
+     	
+T=1000ms	[组标识]
+20  288  A1  00  00  00         [水温84]		
+
+T=1000ms	[组标识]
+20  288  CA  00  00  00         [水温115]		
+
+T=1000ms	[组标识]
+20  288  D1  00  00  00         [水温120]		
+
+
+T=1000ms	[组标识]		
+20  094  00  00  07  D0      	       [转速500]
+20  088  14  00  00  00    	       [车速20]
+
+T=1000ms	[组标识]		
+20  094  00  00  0F  A0      	       [转速1000]
+20  088  28  00  00  00      	       [车速40]      
+
+T=1000ms	[组标识]		
+20  094  00  00  1F  40      	       [转速2000]
+20  088  3C  00  00  00    	       [车速60]
+
+T=1000ms	[组标识]		
+20  094  00  00  2E  E0     	       [转速3000]
+20  088  50  00  00  00    	       [车速80]
+
+T=1000ms	[组标识]		
+20  094  00  00  3E  80      	       [转速4000]
+20  088  64  00  00  00    	       [车速100]
+
+T=1000ms	[组标识]		
+20  094  00  00  4E  20    	       [转速5000]
+20  088  78  00  00  00    	       [车速120]
+
+T=1000ms	[组标识]		
+20  094  00  00  5D  C0     	       [转速6000]
+20  088  8C  00  00  00    	       [车速140]
+
+T=1000ms	[组标识]		
+20  094  00  00  6D  60     	       [转速7000]
+20  088  A0  00  00  00    	       [车速160]
+
+T=1000ms	[组标识]		
+20  094  00  00  7D  00     	       [转速8000]
+20  088  B4  00  00  00    	       [车速180]
+
+
+T=1000ms	[组标识]		
+20  094  00  00  7D  00     	       [转速8000]
+20  088  C8  00  00  00    	       [车速200]
+
+T=1000ms	[组标识]		
+20  094  00  00  7D  00     	       [转速8000]
+20  088  DC  00  00  00    	       [车速220]
+
+T=1000ms	[组标识]		
+20  094  00  00  7D  00     	       [转速8000]
+20  088  F0  00  00  00    	       [车速240]
+
+
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  118  00 00 00 00 00 00 00 00       [P档]  
+150  116  00 80 00 00 00 00 00 00       [P档]  
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  118  00 00 00 00 00 00 00 00       [R档] 
+150  116  00 70 00 00 00 00 00 00       [R档] 
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  118  00 00 00 00 00 00 00 00       [N档] 
+150  116  00 60 00 00 00 00 00 00       [N档] 
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  118  00 00 00 00 00 00 00 00       [D档] 
+150  116  00 50 00 00 00 00 00 00       [D档] 
+
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 06 00 00 00 00 00       [6档] 
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 05 00 00 00 00 00       [5档] 
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00      
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 04 00 00 00 00 00       [4档] 
+
+
+T=1000ms	[组标识]
+150  068  08 00 00 00 00 00 00 00       [ABS]     
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 03 00 00 00 00 00       [3档] 
+
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00       [空 机油压力]
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 02 00 00 00 00 00       [2档] 
+
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00       [空 车门]
+150  268  00 00 00 00 00 00 00 00
+150  118  00 02 01 00 00 00 00 00       [1档] 
+
+T=1000ms	[组标识]
+150  288  00 04 00 00 00 00 00 00       [发动故障]
+150  068  00 00 00 00 00 00 00 00       
+150  268  00 00 00 00 00 00 00 00
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00       [空 充电灯]
+150  268  00 00 00 00 00 00 00 00
+150  288  00 00 00 00 00 00 00 00
+
+T=1000ms	[组标识]
+150  268  20 00 00 00 00 00 00 00       [安全气囊]
+150  068  00 00 00 00 00 00 00 00       
+150  288  00 00 00 00 00 00 00 00
+
+T=1000ms	[组标识]       
+150  068  00 00 00 00 00 00 00 00       [空 制动器]
+150  268  00 00 00 00 00 00 00 00
+
+
+T=1000ms	[组标识]
+100  082  00 00 00 00 00 00 00 80       [CRUISE]     
+150  068  00 00 00 00 00 00 00 00
+150  268  00 00 00 00 00 00 00 00
+
+
+T=1000ms	[组标识]
+150  288  00 02 00 00 00 00 00 00       [SVS]
+150  068  00 00 00 00 00 00 00 00       
+100  082  00 00 00 00 00 00 00 00    
+150  268  00 00 00 00 00 00 00 00
+
+
+T=1000ms	[组标识]
+150  068  04 00 00 00 00 00 00 00       [EBD]     
+150  268  00 00 00 00 00 00 00 00
+150  288  00 00 00 00 00 00 00 00
+
+
+
+T=1000ms	[组标识]		
+20  268  00 00 00 00 00
+20  094  00  00  7D  00     	       [转速8000]
+20  088  F0  00  00  00    	       [车速240]
+
+
+
+TEND		[结束标识不可改动]
\ No newline at end of file

知豆检测台/Test_Bench/Library/FT_VehSpeedCalc.c

+#include "FT_VehSpeedCalc.h"
+
+typedef struct{
+    unsigned int N;
+    unsigned int VehSpd;
+}s_VehSpeedInfo_Buffer;
+
+s_VehSpeedInfo_Buffer MsgToSpd;
+s_VehSpeedInfo_Buffer SpdToMsg;
+
+unsigned int FT_WheelRadius = 309;
+unsigned int FT_WheelTeeth = 68;
+unsigned int FT_WheelRatio = 5135;
+
+void SetWheelInfo(unsigned int Radius, unsigned int Teeth){
+    unsigned long wTemp;
+
+    wTemp = Radius;
+    wTemp = 2 * 314 * wTemp / Teeth;
+    wTemp = wTemp * 36 * 50;
+    wTemp = wTemp / 1000;
+
+    FT_WheelRatio = wTemp;
+}
+unsigned int TestMsg;
+void FT_VehSpeedCalc_Main(unsigned int Data, unsigned int *DestData, unsigned char Dir){
+    unsigned long wTemp;
+
+    switch(Dir){
+        case CANMESSAGE_TO_SPEED:{
+            
+        }break;
+
+        case SPEED_TO_CANMESSAGE:{
+            SpdToMsg.VehSpd = Data;
+            wTemp = SpdToMsg.VehSpd;
+            wTemp =  wTemp * 1000 * 2;
+            wTemp = wTemp / FT_WheelRatio;
+            TestMsg = wTemp;
+            SpdToMsg.N += wTemp;
+            if(SpdToMsg.N > 64255){
+                SpdToMsg.N -= 64255;
+            }
+            *DestData = SpdToMsg.N;
+        }break;
+
+        default:
+            ;
+    }
+}
+
+void FT_Fill_VehSpeedCANMessage(unsigned int val, unsigned char *Data){
+    Data[0] = val;
+    Data[1] = val >> 8;
+    Data[2] = val;
+    Data[3] = val >> 8;
+    Data[4] = val;
+    Data[5] = val >> 8;
+    Data[6] = val;
+    Data[7] = val >> 8;
+}
\ No newline at end of file

知豆检测台/Test_Bench/Library/FT_VehSpeedCalc.h

+#ifndef __FT_VEHSPEEDCALC_H_
+#define __FT_VEHSPEEDCALC_H_
+
+#define SPEED_TO_CANMESSAGE         1
+#define CANMESSAGE_TO_SPEED         0
+
+void SetWheelInfo(unsigned int Radius, unsigned int Teeth);
+void FT_VehSpeedCalc_Main(unsigned int Data, unsigned int *DestData, unsigned char Dir);
+void FT_Fill_VehSpeedCANMessage(unsigned int val, unsigned char *Data);
+
+
+
+#endif
\ No newline at end of file

知豆检测台/Test_Bench/Library/TimeCtrl.c

+#include "TimeCtrl.h"
+
+typedef struct{
+    unsigned int Time;
+    unsigned char En;
+}s_TimeCtrl;
+s_TimeCtrl TimeCtrl[TimeSNMax];
+
+typedef struct{
+    unsigned int Timer_2ms;
+    unsigned int Timer_10ms;
+}s_BaseTimer;
+s_BaseTimer BaseTimer;
+
+
+/*************************************************************************
+ * Timer Control
+*************************************************************************/
+void InitTimeCtrl(void){
+    unsigned char i;
+
+    for(i = 0; i < TimeSNMax; i++){
+        TimeCtrl[i].Time = 0;
+        TimeCtrl[i].En = 0;
+    }
+
+    BaseTimer.Timer_2ms = 0;
+    BaseTimer.Timer_10ms = 0;
+}
+
+void TimerCtrlms(unsigned int time){
+    unsigned char i;
+
+    for(i = 0; i < TimeSNMax; i++){
+        if(TimeCtrl[i].En){
+            if(TimeCtrl[i].Time < MAX_CTRL_TIME){
+                TimeCtrl[i].Time += time;
+            }
+        }else{
+            TimeCtrl[i].Time = 0;
+        }
+    }
+}
+
+void EnableTimeCtrl(e_TimeSN sn){
+    if(!TimeCtrl[sn].En){
+        TimeCtrl[sn].En = 1;
+        TimeCtrl[sn].Time = 0;
+    }
+}
+
+void DisableTimeCtrl(e_TimeSN sn){
+    if(TimeCtrl[sn].En){
+        TimeCtrl[sn].En = 0;
+        TimeCtrl[sn].Time = 0;
+    }
+}
+
+void ClearCtrlTime(e_TimeSN sn){
+    TimeCtrl[sn].Time = 0;
+}
+
+unsigned int GetCtrlTime(e_TimeSN sn){
+    return TimeCtrl[sn].Time;
+}
+
+/*************************************************************************
+ * Timer Task
+ * 2ms / 10ms
+*************************************************************************/
+void Timer_1ms_Base(void){
+    if(BaseTimer.Timer_10ms <= 5000){
+        BaseTimer.Timer_10ms += 1;
+    }
+    if(BaseTimer.Timer_2ms <= 5000){
+        BaseTimer.Timer_2ms += 1;
+    }
+}
+
+void Timer_2ms_Task(void){
+    unsigned int n;
+    unsigned char i;
+    if(BaseTimer.Timer_2ms >= 2){
+        n = BaseTimer.Timer_2ms / 2;
+        BaseTimer.Timer_2ms = BaseTimer.Timer_2ms - (n * 2);
+
+        TimerCtrlms(2 * n);
+    }
+}
+void Timer_10ms_Task(void){
+    unsigned int n;
+    unsigned char i;
+    if(BaseTimer.Timer_10ms >= 10){
+        n = BaseTimer.Timer_10ms / 10;
+        BaseTimer.Timer_10ms = BaseTimer.Timer_10ms - (n * 10);
+
+        
+    }
+}
\ No newline at end of file

知豆检测台/Test_Bench/Library/TimeCtrl.h

+#ifndef __TIMECTRL_H_
+#define __TIMECTRL_H_
+
+#define MAX_CTRL_TIME               15000           //ms
+
+typedef enum{
+    CANMsgSend_10ms = 0,
+    CANMsgSend_20ms,
+    CANMsgSend_50ms,
+    CANMsgSend_100ms,
+    CANMsgSend_200ms,
+    CANMsgSend_500ms,
+    CANMsgSend_1s,
+    CANMsgSend_10s,
+
+    TwoLamp_Ctrl,
+
+    TimeSNMax,
+}e_TimeSN;
+
+
+void InitTimeCtrl(void);
+void TimerCtrlms(unsigned int time);
+void EnableTimeCtrl(e_TimeSN sn);
+void DisableTimeCtrl(e_TimeSN sn);
+void ClearCtrlTime(e_TimeSN sn);
+unsigned int GetCtrlTime(e_TimeSN sn);
+
+void Timer_1ms_Base(void);
+void Timer_2ms_Task(void);
+void Timer_10ms_Task(void);
+
+
+
+
+
+#endif
\ No newline at end of file

知豆检测台/Test_Bench/P&E_Multilink_USB.ini

+[STARTUP]
+CPUTARGETTYPE=0
+USE_CYCLONEPRO_RELAYS=0
+PORT=1
+interface_selection=0
+SHOWDIALOG=0
+IO_DELAY_SET=1
+frequency_has_changed_old_io_delay_cnt=14
+CyclonePro_poweroffonexit=0
+CyclonePro_currentvoltage=255
+CyclonePro_PowerDownDelay=250
+CyclonePro_PowerUpDelay=250
+IO_DELAY_CNT=14
+PCI_DELAY=0
+RESET_DELAY=0
+
+
+
+
+
+
+
+
+
+
+[Environment Variables]
+GENPATH={Project}Sources;{Compiler}lib\hc12c\src;{Compiler}lib\hc12c\include;{Compiler}lib\hc12c\lib;{Compiler}lib\xgatec\src;{Compiler}lib\xgatec\include;{Compiler}lib\xgatec\lib
+LIBPATH={Compiler}lib\hc12c\include;{Compiler}lib\xgatec\include
+OBJPATH={Project}bin
+TEXTPATH={Project}bin
+ABSPATH={Project}bin
+
+[HI-WAVE]
+Target=TBDML
+Layout=C_layout.hwl
+LoadDialogOptions=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+CPU=HC12
+AEFWarningDialog=FALSE
+MainFrame=2,3,-32000,-32000,-1,-1,108,-2,1133,531
+TOOLBAR=57600 57601 32795 0 57635 57634 57637 0 57671 57669 0 32777 32776 32782 32780 32781 32778 0 32806
+Configuration=P&E_Multilink_USB.hwc
+Statusbar=1
+ShowToolbar=1
+Smallborder=0
+Hideheadline=0
+Hidetitle=0
+
+
+
+
+
+
+
+
+
+
+[HC12MultilinkCyclonePro_GDI_SETTINGS]
+CMDFILE0=CMDFILE STARTUP ON ".\cmd\P&E_Multilink_USB_startup.cmd"
+CMDFILE1=CMDFILE RESET ON ".\cmd\P&E_Multilink_USB_reset.cmd"
+CMDFILE2=CMDFILE PRELOAD ON ".\cmd\P&E_Multilink_USB_preload.cmd"
+CMDFILE3=CMDFILE POSTLOAD ON ".\cmd\P&E_Multilink_USB_postload.cmd"
+CMDFILE4=CMDFILE VPPON ON ".\cmd\P&E_Multilink_USB_vppon.cmd"
+CMDFILE5=CMDFILE VPPOFF ON ".\cmd\P&E_Multilink_USB_vppoff.cmd"
+CMDFILE6=CMDFILE UNSECURE ON ".\cmd\P&E_Multilink_USB_erase_unsecure_hcs12p.cmd"
+MCUId=0x2F2
+CHIPSECURE=CHIPSECURE SETUP 0xFF0F 0x3 0x2
+DBG0=DBG GENERAL DISARM_ON PROTECT_OFF ANALYZE_ON STEPATRUN_ON
+DBG1=DBG PREDEFINED SELECT 0
+DBG2=DBG PREDEFINED DBGENGINE TRACE ENABLE RECORDAFTER PUREPC
+NV_PARAMETER_FILE=
+NV_SAVE_WSP=0
+NV_AUTO_ID=1
+
+
+
+
+
+
+
+
+[ICD12]
+COMSETTINGS=SETCOMM DRIVER NOPROTOCOL NOPERIODICAL
+SETCLKSW=0
+HOTPLUGGING=0
+DETECTRUNNING=0
+RESYNCONCOPRESET=0
+BDMAutoSpeed=0
+BDMClockSpeed=14
+HIGHIODELAYCONSTFORPLL=40
+
+[PORT]
+IP=
+
+
+[Recent Applications File List]
+File0=D:\李亭龙工作\天有为工作\我的程序\Freescale\CAN检测软件\CAN FC-3跑表架\bin\Project.abs
+File1=D:\李亭龙工作\天有为工作\我的程序\Freescale\CAN检测软件\CAN NL-1跑表架\bin\Project.abs
+File2=D:\李亭龙工作\天有为工作\我的程序\Freescale\CAN检测软件\CAN 扩展帧\bin\Project.abs
+File3=F:\21--505CAN检测程序\CAN检测软件\bin\Project.abs
+LoadFlags0=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags1=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags2=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags3=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+
+
+[Recent Layout File List]
+File0=C_layout.hwl
+File1=
+File2=
+File3=
+
+[TBDML]
+COMSETTINGS=SETCOMM DRIVER NOPROTOCOL NOPERIODICAL
+
+[TBDML HCS12_GDI_SETTINGS]
+CMDFILE0=CMDFILE STARTUP ON "startup.cmd"
+CMDFILE1=CMDFILE RESET ON "reset.cmd"
+CMDFILE2=CMDFILE PRELOAD ON "preload.cmd"
+CMDFILE3=CMDFILE POSTLOAD ON "postload.cmd"
+MCUId=0x2F2
+CMDFILE4=CMDFILE VPPON ON "vppon.cmd"
+CMDFILE5=CMDFILE VPPOFF ON "vppoff.cmd"
+CMDFILE6=CMDFILE UNSECURE ON "unsecure.cmd"
+CHIPSECURE=CHIPSECURE SETUP 0xFF0F 0x3 0x2
+DBG0=DBG GENERAL DISARM_ON PROTECT_OFF ANALYZE_ON STEPATRUN_ON
+DBG1=DBG PREDEFINED SELECT 0
+DBG2=DBG PREDEFINED DBGENGINE TRACE ENABLE RECORDAFTER PUREPC
+NV_PARAMETER_FILE=C:\Program Files (x86)\Freescale\CWS12v5.1\prog\FPP\mcu02F2.fpp
+NV_SAVE_WSP=0
+NV_AUTO_ID=1

知豆检测台/Test_Bench/Sources/derivative.h

+/*
+ * Note: This file is recreated by the project wizard whenever the MCU is
+ *       changed and should not be edited by hand
+ */
+
+/* Include the derivative-specific header file */
+#include <mc9s12hy64.h>
+
+#pragma LINK_INFO DERIVATIVE "mc9s12hy64"
+

知豆检测台/Test_Bench/Sources/main.c

+#define GLOBALS_VARIABLE
+#include "../App_Headers/includes.h"  
+#include "../Library/TimeCtrl.h"
+#include "../Library/FT_VehSpeedCalc.h"
+
+
+void main(void) {
+  unsigned char i;
+
+  step_cycle = 0;
+
+  Api_Sys_Init();
+  App_State_Init();
+  App_Load_Data();
+  Format_CAN_Msg();
+  APP_Test_Init();
+  InitTimeCtrl();
+  //SetWheelInfo(309,68);
+  //CurVehSpeed = 0;
+
+  for(i = 0; i < TimeSNMax; i++){
+      EnableTimeCtrl(i);
+  }
+
+  //Api_SetTimer0(100,(ClockType *)&Clock);
+  for(;;) {
+      pSTB = 0;
+            
+      __RESET_WATCHDOG();
+
+      Timer_2ms_Task();
+      
+      APP_Button_Proc();
+      APP_ICM_Proc();  
+      
+      App_Can_Proc();
+      Api_LCD_Display();
+  } 
+}

知豆检测台/Test_Bench/TBDML.ini

+[Environment Variables]
+GENPATH={Project}Sources;{Compiler}lib\hc12c\src;{Compiler}lib\hc12c\include;{Compiler}lib\hc12c\lib;{Compiler}lib\xgatec\src;{Compiler}lib\xgatec\include;{Compiler}lib\xgatec\lib
+LIBPATH={Compiler}lib\hc12c\include;{Compiler}lib\xgatec\include
+OBJPATH={Project}bin
+TEXTPATH={Project}bin
+ABSPATH={Project}bin
+
+[HI-WAVE]
+Target=TBDML
+Layout=C_layout.hwl
+LoadDialogOptions=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+CPU=HC12
+MainFrame=2,3,-1,-1,-1,-1,437,191,1367,927
+TOOLBAR=57600 57601 32795 0 57635 57634 57637 0 57671 57669 0 32777 32776 32782 32780 32781 32778 0 32806
+AEFWarningDialog=FALSE
+Configuration=TBDML.hwc
+Statusbar=1
+ShowToolbar=1
+Smallborder=0
+Hideheadline=0
+Hidetitle=0
+
+
+
+
+
+
+
+
+
+
+[TBDML HCS12_GDI_SETTINGS]
+CMDFILE0=CMDFILE STARTUP ON ".\cmd\TBDML_startup.cmd"
+CMDFILE1=CMDFILE RESET ON ".\cmd\TBDML_reset.cmd"
+CMDFILE2=CMDFILE PRELOAD ON ".\cmd\TBDML_preload.cmd"
+CMDFILE3=CMDFILE POSTLOAD ON ".\cmd\TBDML_postload.cmd"
+CMDFILE4=CMDFILE VPPON ON ".\cmd\TBDML_vppon.cmd"
+CMDFILE5=CMDFILE VPPOFF ON ".\cmd\TBDML_vppoff.cmd"
+CMDFILE6=CMDFILE UNSECURE ON ".\cmd\TBDML_erase_unsecure_hcs12p.cmd"
+MCUID=0x02F2
+CHIPSECURE=CHIPSECURE SETUP 0xFF0F 0x3 0x2
+DBG0=DBG GENERAL DISARM_ON PROTECT_OFF ANALYZE_ON STEPATRUN_ON
+DBG1=DBG PREDEFINED SELECT 0
+DBG2=DBG PREDEFINED DBGENGINE TRACE ENABLE RECORDAFTER PUREPC
+NV_PARAMETER_FILE=D:\New Folder\prog\FPP\mcu02F2.fpp
+NV_SAVE_WSP=0
+NV_AUTO_ID=1
+COMDEVICE=SETCOMM COMPORT LPT "TBDML #1"
+ISRDISABLEDSTEP=0
+
+
+
+
+
+
+
+
+
+
+[TBDML]
+COMSETTINGS=SETCOMM DRIVER NOPROTOCOL NOPERIODICAL
+NV_PARAMETER_FILE=
+NV_SAVE_WSP=0
+NV_AUTO_ID=1
+
+
+[Recent Applications File List]
+File0=D:\TYW1\̨֪\Test_Bench\bin\Project.abs
+File1=C:\Users\ǿ\Desktop\TYW\̨֪\Test_Bench\bin\Project.abs
+File2=C:\Users\ǿ\Desktop\fs04___test_bench___little_can\Test_Bench\bin\Project.abs
+File3=D:\LD01_02-ƿ3ϵ\̨\20210705\bin\Project.abs
+LoadFlags0=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags1=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags2=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+LoadFlags3=AUTOERASEANDFLASH RUNANDSTOPAFTERLOAD="main"
+
+
+[Recent Layout File List]
+File0=C_layout.hwl
+File1=
+File2=
+File3=
+
+[Recent HI-WAVE FindProcedure Search]
+Search0=main
+Search1=App_Can_Proc
+Search2=APP_ICM_Proc

知豆检测台/Test_Bench/UDS/UDS_Service.h

+#ifndef __UDS_SERVICE_H_
+#define __UDS_SERVICE_H_
+/*
+#define ServiceID_DiagnosticSessionControl 0x10
+#define ServiceID_ECUReset 0x11
+#define ServiceID_SecurityAccess 0x27
+#define ServiceID_ReadDataByIdentifier 0x22
+#define ServiceID_WriteDataByIdentifier 0x2E
+#define ServiceID_TesterPresent 0x3E
+
+typedef enum
+{
+    TransferEnd = 0,
+    TransferStart,
+} e_TransferStatus;
+
+typedef enum
+{
+    Tx_NoAct = 0,
+    Tx_SF,
+    Tx_FF,
+    Tx_CF,
+    Tx_End,
+} e_TxType;
+
+typedef struct
+{
+    unsigned char ServiceID;
+    e_TransferStatus TransferStatus;
+    unsigned int DataLen;
+    unsigned char Data[64];
+} s_UDS_ServiceBuffer;
+
+void SetRxTransferStatus(e_TransferStatus sts, unsigned int UDS_Len);
+unsigned char GetRxTransferDataNumber(void);
+void TransferServiceRxInfo(unsigned char *Data, unsigned char len);
+
+void UDS_ServiceMain(void);
+
+void SetServiceProc(unsigned char ServiceID, unsigned int ServiceDID);
+
+e_TxType TransferServiceTxInfo(s_UDS_Msg_Buffer *buffer);
+*/
+#endif

知豆检测台/Test_Bench/UDS/UDS_TP.h

+#ifndef __UDS_TP_H_
+#define __UDS_TP_H_
+/*
+#define N_PCITYPE_SF 0
+#define N_PCITYPE_FF 1
+#define N_PCITYPE_CF 2
+#define N_PCITYPE_FC 3
+
+typedef enum
+{
+    COMM_Free = 0,
+    COMM_Send_FC,
+    COMM_Wait_FC,
+    COMM_Wait_CF,
+    COMM_Send_Frame,
+    COMM_WaitServiceHandle,
+} e_CommunicateStatus;
+
+typedef union
+{
+    struct
+    {
+        unsigned char SF_DL : 4;
+        unsigned char N_PCItype : 4;
+
+        unsigned char Data1 : 8;
+        unsigned char Data2 : 8;
+        unsigned char Data3 : 8;
+        unsigned char Data4 : 8;
+        unsigned char Data5 : 8;
+        unsigned char Data6 : 8;
+        unsigned char Data7 : 8;
+    } SF_Format;
+
+    struct
+    {
+        unsigned char FF_DL_H : 4;
+        unsigned char N_PCItype : 4;
+
+        unsigned char FF_DL_L : 8;
+
+        unsigned char Data2 : 8;
+        unsigned char Data3 : 8;
+        unsigned char Data4 : 8;
+        unsigned char Data5 : 8;
+        unsigned char Data6 : 8;
+        unsigned char Data7 : 8;
+    } FF_Format;
+
+    struct
+    {
+        unsigned char SN : 4;
+        unsigned char N_PCItype : 4;
+
+        unsigned char Data1 : 8;
+        unsigned char Data2 : 8;
+        unsigned char Data3 : 8;
+        unsigned char Data4 : 8;
+        unsigned char Data5 : 8;
+        unsigned char Data6 : 8;
+        unsigned char Data7 : 8;
+    } CF_Format;
+
+    struct
+    {
+        unsigned char FS : 4;
+        unsigned char N_PCItype : 4;
+
+        unsigned char BS : 8;
+        unsigned char STmin : 8;
+        unsigned char Data3 : 8;
+        unsigned char Data4 : 8;
+        unsigned char Data5 : 8;
+        unsigned char Data6 : 8;
+        unsigned char Data7 : 8;
+    } FC_Format;
+
+    unsigned char Data[8];
+} u_UDS_Message_Format;
+
+typedef struct
+{
+    u_UDS_Message_Format DataMsg;
+    unsigned char AnalysisStatus;
+} s_UDS_Msg_Buffer;
+
+extern s_UDS_Msg_Buffer UDS_Tx_Buffer;
+
+extern e_CommunicateStatus CommunicateStatus;
+
+void GetUDSMessage(unsigned char *CAN_BufAddr, unsigned char len);
+unsigned char FillTxBuffer(unsigned char *Data, unsigned char len);
+void ClearUDS_Msg_Buffer(s_UDS_Msg_Buffer *buffer);
+void AnalysisUDSMessage(void);
+void TP_SendFC(void);
+void EnableUDSSend(void);
+void TP_SendServiceMsg(void);
+*/
+#endif
\ No newline at end of file