Skip to content

V
VC66_7C
Commit 31cbd497 authored by hu's avatar hu
Browse files
Options

调整AD 调整按键采集范围，调整电池显示，调整WET显示功能

parent 8e698101
Hide whitespace changes
Inline Side-by-side
Showing with 22355 additions and 22309 deletions
ghs/project
View file @ 31cbd497
No preview for this file type
ghs/project.hex
View file @ 31cbd497
This source diff could not be displayed because it is too large. You can view the blob instead.
ghs/project.siz
View file @ 31cbd497
project .intvect 1536
project .text 317660
project .rodata 411071
project .text 317676
project .rodata 411103
project .secinfo 120
project .syscall 6
project .romdata 9029
project .romdata 9021
project .ROM.ramfunc 208
project .ramfunc 208
source/Application/APP/Data_AirPressure/Data_AirPressure.c
View file @ 31cbd497
......@@ -272,11 +272,11 @@ void Data_WET_Processing_Service(void)
if ((K_Line_Set.K_Line_LID42 == 0x00) || (K_Line_Set.K_Line_LID42 == 0x02))
{
Gas_Value = 0u;
Gas_Value = RTE_Read_WET_AIR_Voltage();
}
else if ((K_Line_Set.K_Line_LID42 == 0x01) || (K_Line_Set.K_Line_LID42 == 0x03))
{
Gas_Value = 0u;
Gas_Value = RTE_Read_WET_AIR_Voltage();
}
if ((Common_Get_IG_Sts_Valid() == 1u) && (Common_Get_IG_Sts() == COMMON_POWER_ON))
......
source/Application/APP/Data_Voltmeter/Data_Voltmeter.c
View file @ 31cbd497
......@@ -137,7 +137,6 @@ static void Data_Voltmeter_2_Gui(void)
if (VoltmeterVariable.Valid)
{
VoltmeterVariable.AvrVoltage /= 10u;
SetGaugesPara(VoltGauges, VoltmeterVariable.AvrVoltage);
u8GuiMode = GetGaugesCurrentPos(VoltGauges);
}
......
source/Application/APP/GaugesMode/Gauges.c
View file @ 31cbd497
......@@ -435,7 +435,14 @@ void GaugeMoveing(uint8_t GaugesNum)
}
}
MoveTypePara = 10u;
if (GaugesNum == VoltGauges)
{
MoveTypePara = 100u;
}
else
{
MoveTypePara = 10u;
}
}
else
{
......
source/Application/APP/GaugesMode/GaugesInterface.c
View file @ 31cbd497
......@@ -41,9 +41,9 @@ static const uint16_t GaugesDataInInit[GaugesTotal][3][25] =
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0, 0}
},
/*电池电压*/
{ {0, 1700, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 1850, 1950, 2050, 2150, 2250, 2350, 2450, 2550, 2650, 2750, 2850, 2950, 3050, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
{ {0, 17000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 18500, 19500, 20500, 21500, 22500, 23500, 24500, 25500, 26500, 27500, 28500, 29500, 30500, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
},
};
......
source/Application/APP/Key/Key_user.c
View file @ 31cbd497
......@@ -638,7 +638,7 @@ Key_Real_Status_en_t Key_Real_Status_Read_Up(void)
}
else
{
if ((Key_R >= (1200 - 300)) && (Key_R <= (1200 + 300)))
if ((Key_R >= (1200 - 400)) && (Key_R <= (1200 + 400)))
{
enKeyRealStatus = KEY_LINE_PRESS;
}
......@@ -665,7 +665,7 @@ Key_Real_Status_en_t Key_Real_Status_Read_Down(void)
}
else
{
if ((Key_R >= (2900 - 300)) && (Key_R <= (2900 + 300)))
if ((Key_R >= (2700 - 400)) && (Key_R <= (2700 + 400)))
{
enKeyRealStatus = KEY_LINE_PRESS;
}
......@@ -692,7 +692,7 @@ Key_Real_Status_en_t Key_Real_Status_Read_Enter(void)
}
else
{
if ((Key_R >= (5300 - 300)) && (Key_R <= (5300 + 300)))
if ((Key_R >= (4700 - 400)) && (Key_R <= (4700 + 400)))
{
enKeyRealStatus = KEY_LINE_PRESS;
}
......@@ -718,7 +718,7 @@ Key_Real_Status_en_t Key_Real_Status_Read_Return(void)
}
else
{
if ((Key_R >= (9150 - 300)) && (Key_R <= (9150 + 300)))
if ((Key_R >= (8000 - 400)) && (Key_R <= (8000 + 400)))
{
enKeyRealStatus = KEY_LINE_PRESS;
}
......
source/Application/Graphic/GUI/GUI.c
View file @ 31cbd497
......@@ -25,6 +25,7 @@
#include "CAN_FUNC.h"
#include "key.h"
#include "Data_Voltmeter.h"
#include "Data_AirPressure.h"
#define TRAPA 0u
#define TRAPB 1u
......@@ -602,7 +603,8 @@ void GUI_WetGas_Dispaly(uint8_t Mode)
if (Mode == GUI_DISP_MODE_NORMAL)
{
current_value = HYQ_TEST;
current_value = GetGaugesCurrentPos(WETGasGauges);
//Common_Get_WET_Valid(); /*有效性判断用*/
if (current_value <= 17u)
{
......
source/Application/RTE/RTE_ADC.c
View file @ 31cbd497
......@@ -92,6 +92,20 @@ uint32_t RTE_Read_SECONDARY_AIR_Voltage(void)
Result = ADC_Read_Signal(ADC_CH_SECONDARY_AIR_VOLTAGE);
return Result;
}
/*-------------------------------------------------------------------------
* Function Name : RTE_Read_WET_AIR_Voltage
* Description : 读WET
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
uint32_t RTE_Read_WET_AIR_Voltage(void)
{
uint32_t Result = 0x00ul;
Result = ADC_Read_Signal(ADC_CH_WETAIR_VOLTAGE);
return Result;
}
/*-------------------------------------------------------------------------
* Function Name : RTE_Read_FUEL_REF_Voltage
* Description : 读燃油基准电压
......@@ -186,7 +200,7 @@ uint8_t RTE_Read_KL30_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_PRIMARY_AIR_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_PRIMARY_AIR_VOLTAGE);
return Result;
}
......@@ -200,7 +214,7 @@ uint8_t RTE_Read_PRIMARY_AIR_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_SECONDARY_AIR_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_SECONDARY_AIR_VOLTAGE);
return Result;
}
......@@ -214,7 +228,7 @@ uint8_t RTE_Read_SECONDARY_AIR_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_FUEL_REF_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_FUEL_REF_VOLTAGE);
return Result;
}
......@@ -228,7 +242,7 @@ uint8_t RTE_Read_FUEL_REF_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_FUEL_R_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_FUEL_R);
return Result;
}
......@@ -242,7 +256,7 @@ uint8_t RTE_Read_FUEL_R_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_KEY_R_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_KEY);
return Result;
}
......@@ -256,7 +270,22 @@ uint8_t RTE_Read_KEY_R_Valid(void)
--------------------------------------------------------------------------*/
uint8_t RTE_Read_NTC_R_Valid(void)
{
uint8_t Result = 0x00u;
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_NTC_R);
return Result;
}
/*-------------------------------------------------------------------------
* Function Name : RTE_Read_WET_AIR_Value
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
uint8_t RTE_Read_WET_AIR_Value(void)
{
uint8_t Result = 0x00u;
Result = ADC_Read_Signal_Valid(ADC_CH_WETAIR_VOLTAGE);
return Result;
}
source/Application/RTE/RTE_ADC.h
View file @ 31cbd497
......@@ -12,6 +12,7 @@ uint32_t RTE_Read_KL15_Voltage(void);
uint32_t RTE_Read_KL30_Voltage(void);
uint32_t RTE_Read_PRIMARY_AIR_Voltage(void);
uint32_t RTE_Read_SECONDARY_AIR_Voltage(void);
uint32_t RTE_Read_WET_AIR_Voltage(void);
uint32_t RTE_Read_FUEL_REF_Voltage(void) ;
uint32_t RTE_Read_FUEL_R(void) ;
uint32_t RTE_Read_KEY_R(void) ;
......@@ -27,6 +28,7 @@ uint8_t RTE_Read_FUEL_REF_Valid(void) ;
uint8_t RTE_Read_FUEL_R_Valid(void) ;
uint8_t RTE_Read_KEY_R_Valid(void) ;
uint8_t RTE_Read_NTC_R_Valid(void) ;
uint8_t RTE_Read_WET_AIR_Value(void);
......
source/Driver/Analog_Signals/Analog_Signals.c
View file @ 31cbd497
......@@ -4,9 +4,9 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2021/9/2 9:47:55
* Date : 2021/11/25 15:48:30
* Cfg Tool Ver : 1.1.0
* Engineer : wangboyu
* Engineer :
* (c) Heilongjiang TYW electronics co., LTD
*
******************************************************************************/
......@@ -74,7 +74,7 @@ ADC_Data_st_t stADCData[ADC_SIGNAL_CH_NUMBER];
const uint8_t u8ADCChList[ADC_CONV_CH_NUMBER] =
{
0U, 10U, 9U, 7U, 8U, 11U, 2U,
0U, 10U, 9U, 7U, 8U, 5U, 11U, 2U,
};
const ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
......@@ -84,8 +84,9 @@ const ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
{ 2U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 3U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit102,},
{ 4U, 2U, 0U, 3U, 0U, 1U, ADC_Res_Calc_Circuit103,},
{ 5U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit101,},
{ 6U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
{ 5U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 6U, 1U, 0U, 0U, 0U, 10U, ADC_Res_Calc_Circuit101,},
{ 7U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
};
const ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
......@@ -95,7 +96,8 @@ const ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
{ 0U, 2000000U, 0U, 0U,},
{ 330000U, 100000U, 0U, 0U,},
{ 270000U, 180000U, 1000U, 0U,},
{ 0U, 180000U, 47000U, 0U,},
{ 0U, 2000000U, 0U, 0U,},
{ 0U, 0U, 47000U, 0U,},
{ 0U, 100000U, 100000U, 0U,},
};
......
source/Driver/Analog_Signals/Analog_Signals.h
View file @ 31cbd497
......@@ -4,9 +4,9 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2021/9/2 9:47:55
* Date : 2021/11/25 15:48:30
* Cfg Tool Ver : 1.1.0
* Engineer : wangboyu
* Engineer :
* (c) Heilongjiang TYW electronics co., LTD
*
******************************************************************************/
......@@ -32,13 +32,14 @@ enum ADCChName
ADC_CH_SECONDARY_AIR_VOLTAGE,
ADC_CH_FUEL_REF_VOLTAGE,
ADC_CH_FUEL_R,
ADC_CH_WETAIR_VOLTAGE,
ADC_CH_KEY,
ADC_CH_NTC_R,
};
/* Exported macro ------------------------------------------------------------*/
#define ADC_TOTAL_CH_NUMBER (7U)
#define ADC_SIGNAL_CH_NUMBER (7U)
#define ADC_TOTAL_CH_NUMBER (8U)
#define ADC_SIGNAL_CH_NUMBER (8U)
#define ADC_REF_VOLTAGE u16ADCRefVoltage
/* Exported variables --------------------------------------------------------*/
......
utility/AD/inc/Analog_Signals.h
View file @ 31cbd497
......@@ -4,9 +4,9 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2021/11/23 11:42:23
* Date : 2021/11/25 15:48:30
* Cfg Tool Ver : 1.1.0
* Engineer : wangboyu
* Engineer :
* (c) Heilongjiang TYW electronics co., LTD
*
******************************************************************************/
......@@ -32,13 +32,14 @@ enum ADCChName
ADC_CH_SECONDARY_AIR_VOLTAGE,
ADC_CH_FUEL_REF_VOLTAGE,
ADC_CH_FUEL_R,
ADC_CH_WETAIR_VOLTAGE,
ADC_CH_KEY,
ADC_CH_NTC_R,
};
/* Exported macro ------------------------------------------------------------*/
#define ADC_TOTAL_CH_NUMBER (7U)
#define ADC_SIGNAL_CH_NUMBER (7U)
#define ADC_TOTAL_CH_NUMBER (8U)
#define ADC_SIGNAL_CH_NUMBER (8U)
#define ADC_REF_VOLTAGE u16ADCRefVoltage
/* Exported variables --------------------------------------------------------*/
......
utility/AD/src/Analog_Signals.c
View file @ 31cbd497
......@@ -4,9 +4,9 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2021/11/23 11:42:23
* Date : 2021/11/25 15:48:30
* Cfg Tool Ver : 1.1.0
* Engineer : wangboyu
* Engineer :
* (c) Heilongjiang TYW electronics co., LTD
*
******************************************************************************/
......@@ -74,7 +74,7 @@ ADC_Data_st_t stADCData[ADC_SIGNAL_CH_NUMBER];
const uint8_t u8ADCChList[ADC_CONV_CH_NUMBER] =
{
0U, 10U, 9U, 7U, 8U, 11U, 2U,
0U, 10U, 9U, 7U, 8U, 5U, 11U, 2U,
};
const ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
......@@ -84,8 +84,9 @@ const ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
{ 2U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 3U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit102,},
{ 4U, 2U, 0U, 3U, 0U, 1U, ADC_Res_Calc_Circuit103,},
{ 5U, 1U, 0U, 0U, 0U, 10U, ADC_Res_Calc_Circuit101,},
{ 6U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
{ 5U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 6U, 1U, 0U, 0U, 0U, 10U, ADC_Res_Calc_Circuit101,},
{ 7U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
};
const ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
......@@ -95,6 +96,7 @@ const ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
{ 0U, 2000000U, 0U, 0U,},
{ 330000U, 100000U, 0U, 0U,},
{ 270000U, 180000U, 1000U, 0U,},
{ 0U, 2000000U, 0U, 0U,},
{ 0U, 0U, 47000U, 0U,},
{ 0U, 100000U, 100000U, 0U,},
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment