调整上电时序

source/Application/APP/PowerManagement/PowerManagement_user.c

@@ -66,6 +66,7 @@
 
 static uint8_t PowerGetNMStatus(void);
 extern void SEG_LCD_Window_Switch(uint8_t Sw);
+extern void DelayUs(uint32_t time);
 
 Power_Status_t Power_KL30_Init ( void )
 {
@@ -121,6 +122,7 @@ Power_Status_t Power_KL30_Init ( void )
 
 void Power_Sleep_Init(void)
 {
+    uint16_t i = 0;
     /*数据*/
     Speed_Sleep_Init();
     Tacho_Sleep_Init();
@@ -169,18 +171,25 @@ void Power_Sleep_Init(void)
     RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_11);
     RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_12);
     RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_13);
-
     RSCAN0_Sleep_Init();
 
     VCC12V0_OUT_EN = 0u;        /*12V 电源使能*/
     VCC05V0_OUT_EN = 0u;        /*外设5V 电源使能*/
-    D1530_EN_MCU_OUT = 0u;      /*1530 使能*/
     //BL_ACC_EN = 1U;             /*8867 使能*/
     Fuel_VCC05V_OUT_EN = 0u ;   /*燃油电源 使能*/
     AIR_5V_OUT_EN = 0u;         /*气压 5V*/
     ACC5V_LED_PWM_MCU = 0u;
     BUZZER_ACC_OUT_EN = 0u;
 
+    MCU_STBYB_LCD_OUT = 0;
+    for (i = 0; i <= 55; i++)
+    {
+        DelayUs(10000);
+    }
+    //MCU_RSTB_LCD_OUT = 0;
+    //MCU_DCLK_OUT = 0;
+    //D1530_EN_MCU_OUT = 0u;      /*1530 使能*/
+
     GPIO_Init(GPIO_SLEEP_MODE );
 }
 

source/Driver/Graphic/Graphic.c

@@ -40,7 +40,7 @@
 #define   GFX_REG_OLDI0CHCR                 (0xF2002010UL)
 #define   GFX_REG_OLDI0SKEWCTR              (0xF2002070UL)
 
-
+extern void DelayUs(uint32_t time);
 
 
 
@@ -452,8 +452,10 @@ void Gfx_Sys_Start(void)
 
     R_WM_DevInit(GFX_WM_UNIT, g_stGfxWMMsgQueue, GFX_WM_MSG_QUEUE_LEN, 0, &g_stGfxIRAMheap, &g_stGfxSDRAMheap);
 
-    MCU_STBYB_LCD_OUT = 1U ;
     MCU_RSTB_LCD_OUT = 1U ;
+    MCU_DCLK_OUT     = 1u;
+    DelayUs(20000);
+    MCU_STBYB_LCD_OUT = 1U ;
 
     R_WM_ScreenTimingSetByName(GFX_WM_UNIT, (const int8_t*)GFX_DISPLAY_NAME);
     R_WM_ScreenColorFormatSet(GFX_WM_UNIT, (R_WM_OUTCOLORFMT_RGB888 | R_WM_OUTCOLORFMT_FLAG_SWAP_BR | R_WM_OUTCOLORFMT_FLAG_ENDIAN));

source/Driver/Timer/TimerB.c

@@ -506,7 +506,7 @@ static void TimerB_BackLight_Demo_Init(void)
 
     //8867_BL_PWM TFT背光
     TimerB_PWM_Channel_Init(TIMERB_2_CH1 , TIMERB_CLOCK_0 , TIMERB_HIGH );
-    TimerB_PWM_Channel_Fre_Set(TIMERB_2_CH1 , 3000U , 0u);
+    TimerB_PWM_Channel_Fre_Set(TIMERB_2_CH1 , 20000U , 0u);
     TimerB_PWM_Channel_Start(TIMERB_2_CH1 );
 
     //水温白灯

source/Graphic/macro/vo/ddb/src/r_ddb_timing.c

@@ -95,7 +95,7 @@ static const r_ddb_Timing_t loc_DisplayMode[] = {
 	 //(uint32_t)R_DDB_DISP_FLAG_VSYNC_ACTHI |
 	 (uint32_t)R_DDB_DISP_FLAG_NEGCLK
 	 ),
-     20000000u},
+     30000000u},
 
     {"AUO_C103VAN01_1_1280x480",
       1280, 480u,

source/System/init.c

@@ -140,7 +140,6 @@ void Sys_Startup_Init(void)
     IGH_5VLED = 1;               /* 42-7*/
     DelayUs(50000);
     VCC12V0_OUT_EN = 1u;        /*12V 电源使能 3-3*/
-    D1530_EN_MCU_OUT = 1u;      /*1530 使能  42-14*/
     Fuel_VCC05V_OUT_EN = 1u ;   /*燃油电源 使能 3-5*/
     AIR_5V_OUT_EN = 1u;         /*气压 5V       3-4*/
     ACC5V_LED_PWM_MCU = 1u;       /*42-6*/
@@ -203,7 +202,10 @@ void Sys_Startup_Init(void)
 
     /*外发要用到EEP数据，位置移动*/
     COM_CAN_Init();
-    Gfx_Sys_Start();
+    Gfx_Sys_Start(); /*TFT_INIT*/
+
+    DelayUs(20000);
+    D1530_EN_MCU_OUT = 1u;      /*1530 使能  42-14*/
 }
 
 /**************************************************************************//**