Skip to content

V
VC66_7C
Commit 4788817e authored by hu's avatar hu
Browse files
Options

调整车速显示

parent 490dac50
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 22181 additions and 22208 deletions
ghs/project
View file @ 4788817e
No preview for this file type
ghs/project.hex
View file @ 4788817e
This diff is collapsed.
ghs/project.siz
View file @ 4788817e
project .intvect 1536
project .text 299324
project .rodata 412383
project .text 299212
project .rodata 412367
project .secinfo 120
project .syscall 6
project .romdata 7853
......
source/Application/APP/Data_CoolantTemperature/Data_CoolantTemperature.c
View file @ 4788817e
......@@ -7,7 +7,7 @@
//-------------------------------------------
//断码显示
//-------------------------------------------
//344 - 3.1.1. 水温计显示
//344 - 3.1.1. 水温计显示
//-------------------------------------------
static struct
{
......@@ -84,16 +84,10 @@ void Coolant_Processing_Service(void)
{
Msg_CoolTemp = Get_ID_18FEEE00_Sig_Engine_Coolant_Temperature();
if (Msg_CoolTemp > 0xFA)
if (Msg_CoolTemp > 0xFAu)
{
//if(Timer2s < 100)
//{
// Timer2s ++ ;
//}
//else
{
CoolantVariable.Valid = 0 ;
}
CoolantVariable.Valid = 0u ;
TargetSeg = 0u;
}
else
{
......
source/Application/APP/Data_VehicleSpeed/Data_VehicleSpeed.c
View file @ 4788817e
......@@ -11,8 +11,8 @@ static struct
uint16_t Data[VEH_FILTER_LEN];
} VehcleFilter;
static uint32_t SPEED_PPK = 15925ul;
static uint32_t SPEED_RADIO = 637;
static uint32_t SPEED_PPK = 15925u;
static uint32_t SPEED_RADIO = 637u;
uint16_t Vehicle_ACT_Speed;
uint16_t Vehicle_DISP_Speed;
......@@ -92,6 +92,7 @@ void Speed_Sleep_Init(void)
void Speed_Processing_Service(void)
{
uint32_t VehValTmp = 0u;
uint32_t VehValDisp = 0u;
uint32_t PPK = 0u;
PPK = Get_Speed_PPK();
......@@ -102,22 +103,35 @@ void Speed_Processing_Service(void)
if (VehValTmp > 2250)
{
VehValTmp = 0;
VehicleSpeedValid = 0;
Vehicle_ACT_Speed = 0;
}
else
{
VehicleSpeedValid = 1;
if (VehValTmp >= 1400u)
{
Vehicle_ACT_Speed = 1400u;
}
else if (VehValTmp <= 40u)
{
Vehicle_ACT_Speed = 0u;
}
else
{
Vehicle_ACT_Speed = VehValTmp;
}
}
Vehicle_ACT_Speed = VehValTmp;
//传入表头
VehValTmp = VehSpeedAmplification((uint16_t)VehValTmp);
SetGaugesPara(VehGauges, (uint16_t)VehValTmp);
//传入表头 计算放大系数
VehValDisp = VehSpeedAmplification((uint16_t)Vehicle_ACT_Speed);
SetGaugesPara(VehGauges, (uint16_t)VehValDisp);
//获得显示格和显示车速
Vehicle_CurSeg = GetGaugesCurrentPos(VehGauges);
Vehicle_DISP_Speed = GetVehDisVal(Vehicle_CurSeg, &GaugesInfo_Init_Table[VehGauges]);
Vehicle_DISP_Speed = VehValDisp;//GetVehDisVal(Vehicle_CurSeg, &GaugesInfo_Init_Table[VehGauges]);
}
static uint16_t Cal_VehSpeed(uint16_t Fre, uint8_t Len)
......
source/Application/APP/GaugesMode/GaugesDataAnalysis.c
View file @ 4788817e
......@@ -18,7 +18,7 @@
//#include "CAN_Signal_Tx.h"
#define VEH_SPEED_CURVE_NUM 12u
#define VEH_SPEED_CURVE_NUM 8u
uint16_t RevDispSpeed = 0u;
uint16_t RevTargetSpeed = 0u;
uint16_t RevCurrentSpeed = 0u;
......@@ -47,9 +47,6 @@ typedef struct
volatile Frequency_t VehFre;
uint32_t VehFreLimit;
uint16_t PPK;
/*
......@@ -60,18 +57,13 @@ uint16_t PPK;
const VehSpeedCurve_t VehSpeedCurve[ VEH_SPEED_CURVE_NUM ] =
{
{0u , 0u},
{200u , 210u},
{400u , 420u},
{600u , 620u},
{800u , 830u},
{1000u, 1030u},
{1200u, 1250u},
{1400u, 1450u},
{1600u, 1650u},
{1800u, 1850u},
{2000u, 2050u},
{2250u, 2250u},
{200u , 200u},
{400u , 400u},
{600u , 600u},
{800u , 800u},
{1000u, 1000u},
{1200u, 1200u},
{1400u, 1400u},
};
/*--------------------------------------------------------------------------
* Function Name : VehSpeedFindSector
......@@ -334,8 +326,7 @@ void Veh_Fre_Init(uint32_t PPK)
VehFre.Cycle = 0u;
VehFre.Frequency = 0u;
VehFre.PulseCnt = 0u;
VehFreLimit = (3600000000u / (220u * PPK)) / 4u / 50u;
//VehFreLimit = (3600000000u / (250u * PPK)) / 4u / 50u;
VehFreLimit = (3600000000u / (225u * PPK)) / 4u / 50u;
}
/*-------------------------------------------------------------------------
......@@ -477,7 +468,12 @@ uint16_t Cal_Veh_Frequency(void)
//uint16_t Cal_Veh_Val(void)
//{
// uint32_t VehValTmp;
//
// VehValTmp = Cal_Veh_Frequency();
// VehValTmp = (VehValTmp * 36000u) / PPK;
//
// return (uint16_t)VehValTmp;
//}
uint8_t FuelDropTimes = 0;
......@@ -498,57 +494,4 @@ void Data_ESpeed_LED_Processing_Service(void)
}
/***************************************
数据处理服务函数
***************************************/
void Data_Group_Processing_Service(void)
{
}
void Data_VehicleSpeed_Fre_CaptureSimulata(void)
{
}
void TRIP_FuelConsump(void)
{
uint32_t trip = 0u;
trip = Data_Read_Trip(EM_TRIP_A);
if (trip > 99999u)
{
Data_Clear_Trip(EM_TRIP_A);
}
else
{
;
}
trip = Data_Read_Trip(EM_TRIP_B);
if (trip > 99999u)
{
Rest_FuelCounsumpTrip_Data();
}
else
{
;
}
trip = Data_Read_Trip(EM_TRIP_C);
if (trip > 99999u)
{
Rest_FuelCounsumpThisTime_Data();
}
else
{
;
}
}
uint8_t Common_Get_TempHigh_Type(void)
{
return LED_TEMP_HIGH_FLAG ;
}
uint8_t Common_Get_FuelLow_Type(void)
{
return LED_FUEL_LOW_FLAG ;
}
***************************************/
\ No newline at end of file
source/Application/APP/SEG_LCD/SEG_DISPLAY.c
View file @ 4788817e
......@@ -15,6 +15,8 @@
#define TACHO_SEG_NUM_MAX 27U
#define VEH_SEG_NUM_MAX 30U
static uint8_t GaugesTimer;
static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank, uint8_t *DigitBuf, uint8_t *Reg);
static void Seg_Digit_1_Disp(uint8_t Digit);
static void Seg_Digit_2_Disp(uint8_t Digit);
......@@ -563,6 +565,7 @@ static void SEG_PRI_Display(uint8_t Value, uint8_t Valid, uint8_t seg_status)
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_115, seg_status); // A83
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_116, seg_status); // A84
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_117, seg_status); // A85
if (Valid == GUI_DISP_MODE_BLANK)
{
for (i = 0; i < PRI_SEG_NUM_MAX; i++)
......@@ -577,6 +580,7 @@ static void SEG_PRI_Display(uint8_t Value, uint8_t Valid, uint8_t seg_status)
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_115, 0); // A83
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_116, 0); // A84
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_117, 0); // A85
for (i = 0; i < PRI_SEG_NUM_MAX; i++)
{
mSEG[i] = 0;
......@@ -1015,14 +1019,19 @@ static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank
static uint8_t wbyTestSeg = 0;
static uint16_t wbyTestNum;
static uint8_t WBY_SET = 0;
/******************************************************************************
Seg_Display_Service 在 20MS任务中
信号接口：
信号定义：
输出信号：
******************************************************************************/
void Seg_Display_Service(void)
{
uint32_t Ign_Time;
Ign_Time = Common_GetIgnOnTime();
if (Common_Get_IG_Sts() == COMMON_POWER_ON)
{
if (WBY_SET == 1)
if (WBY_SET == 1)/*测试用点亮全部断码*/
{
Seg_Display_ON();
}
......@@ -1030,6 +1039,7 @@ void Seg_Display_Service(void)
{
SEG_A25_Disp(7u); //左侧弧线
SEG_C25_Disp(7u); //右侧弧线
if (Ign_Time < 3100)
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
......@@ -1038,53 +1048,65 @@ void Seg_Display_Service(void)
SEG_Fuel_Display(GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); //燃油格
SEG_Tacho_Display(GetGaugesCurrentPos(RevGauges), GUI_DISP_MODE_NORMAL, 7u); //转速格
SEG_VehicleSpeed_Display(GetGaugesCurrentPos(VehGauges), GUI_DISP_MODE_NORMAL, 7u); //车速格
/*车速数字 暂时没有变化，只是全部点亮*/
Seg_Digit_1_Disp(12);
Seg_Digit_2_Disp(12);
Seg_Digit_3_Disp(12);
return;
}
if (AirPressure_Get_Valid(0))
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
GaugesTimer = 15u;
}
else
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_INVALID, 7u); // PRI气压格
}
if (AirPressure_Get_Valid(1))
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
}
else
else if (GaugesTimer == 0u)
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_INVALID, 7u); // SEC气压格
}
GaugesTimer = 15u;
if (Coolant_Get_Valid())
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //水温格
if (AirPressure_Get_Valid(0))
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
}
else
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_INVALID, 7u); // PRI气压格
}
if (AirPressure_Get_Valid(1))
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
}
else
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_INVALID, 7u); // SEC气压格
}
if (Coolant_Get_Valid())
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //水温格
}
else
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_INVALID, 7u); //水温格
}
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //车速格
wbyTestNum = Common_Get_Disp_V_Speed();
// Speed_Get_Display_Value()
SEG_VehicleSpeed_Num(wbyTestNum, GUI_DISP_MODE_NORMAL); //车速值
// SEG_PRI_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//PRI气压格
// SEG_SEC_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//SEC气压格
// SEG_Coolant_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//水温格
// SEG_Fuel_Display(wbyTestSeg, GUI_DISP_MODE_NORMAL,7u);//燃油格
// SEG_Tacho_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//转速格
// SEG_VehicleSpeed_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//车速格
// SEG_VehicleSpeed_Num(wbyTestNum,GUI_DISP_MODE_NORMAL);//车速值
}
else
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_INVALID, 7u); //水温格
GaugesTimer--;
}
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //车速格
wbyTestNum = Common_Get_Disp_V_Speed();
// Speed_Get_Display_Value()
SEG_VehicleSpeed_Num(wbyTestNum, GUI_DISP_MODE_NORMAL); //车速值
// SEG_PRI_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//PRI气压格
// SEG_SEC_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//SEC气压格
// SEG_Coolant_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//水温格
// SEG_Fuel_Display(wbyTestSeg, GUI_DISP_MODE_NORMAL,7u);//燃油格
// SEG_Tacho_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//转速格
// SEG_VehicleSpeed_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//车速格
// SEG_VehicleSpeed_Num(wbyTestNum,GUI_DISP_MODE_NORMAL);//车速值
}
}
else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment