根据邮件车厂邮件要求，调整第四组报警功能

source/Application/Alarm/Popups.c

@@ -259,8 +259,6 @@ void Popups_Polling(void)
 
             /*----第四组---------------------------------------------------------------------*/
             if (E_Speed < 350u)
-            {
-                if (K_Line_Set.K_Line_LID2B == 0x00u)
             {
                 /*11.--1--充电异常（系统检测）*/
                 variable_1 = Line_In_Get_Status(LINE_IN_CHARGE);
@@ -289,17 +287,11 @@ void Popups_Polling(void)
                 {
                     Popup_Delete(POPUP4_OIL_PRESSURE);
                 }
-                }
-                else
-                {
-                    Popup_Clear(POPUT4_ABNORMAL_CHARGE);
-                    Popup_Clear(POPUP4_OIL_PRESSURE);
-                }
 
                 /*13.--3--AMT初始化异常           DM1 SPN4220 Key On時*/
                 variable_4 = Get_ID_18FECA03_Sig_SPN();
 
-                if ((variable_4 == 4220u) && (K_Line_Set.K_Line_LID41 == 0x13u))
+                if ((variable_4 == 4220u) && (E_Speed > 350u) && (K_Line_Set.K_Line_LID41 == 0x13u))
                 {
                     Popup_Request(POPUP4_AMT_INIT_EXCE);
                 }
@@ -341,7 +333,7 @@ void Popups_Polling(void)
                 /*17.--7--AMT初始化结束               DM1 SPN4021  Key On時*/
                 variable_4 = Get_ID_18FECA03_Sig_SPN();
 
-                if ((variable_4 == 4021u) && (K_Line_Set.K_Line_LID41 == 0x13u))
+                if ((variable_4 == 4021u) && (E_Speed > 350u) && (K_Line_Set.K_Line_LID41 == 0x13u))
                 {
                     Popup_Request(POPUP4_START_ENG);
                 }

source/Application/K_BUS/kwp2000_service.c

@@ -119,6 +119,7 @@ unsigned char kwp_EcuReset(unsigned char *TxData, unsigned char *RequestData)
 unsigned char kwp_TesterPresent(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     (*TxData) = KWP2000_TESTERPRESENT_REQUEST + KWP2000_POSITIVE_RESPONSE_OFFSET;
     Tx_Len = 1;
     return Tx_Len;
@@ -135,6 +136,7 @@ unsigned char kwp_TesterPresent(unsigned char *TxData, unsigned char *RequestDat
 unsigned char kwp_StartCommunication(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     K_LINE_SIGNAL_FLAG.RecvStart = 1;
 
     (*TxData++) = KWP2000_STARTCOMMUNICATION_REQUEST + KWP2000_POSITIVE_RESPONSE_OFFSET;
@@ -156,6 +158,7 @@ unsigned char kwp_StartCommunication(unsigned char *TxData, unsigned char *Reque
 unsigned char kwp_StopCommunication(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     if (K_LINE_SIGNAL_FLAG.RecvStart == 1)
     {
         K_LINE_SIGNAL_FLAG.RecvStart = 0;            /*EOL诊断结束标识*/
@@ -182,6 +185,7 @@ unsigned char kwp_StopCommunication(unsigned char *TxData, unsigned char *Reques
 unsigned char kwp_readEcuIdentification(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     switch (RequestData[0]) /* subFunction */
     {
     case 0x81: /* ECUIdentificationScalingTable */
@@ -195,7 +199,7 @@ unsigned char kwp_readEcuIdentification(unsigned char *TxData, unsigned char *Re
         break;
     case 0x91: /* vehicleManufacturerECUHardwareNumber */
         (*TxData++) = KWP2000_READECUIDENTIFICATION_REQUEST + KWP2000_POSITIVE_RESPONSE_OFFSET;
-        (*TxData++) = RequestData[0]; // ISUZU Parts No. 8979683010
+        (*TxData++) = RequestData[0]; /* ISUZU Parts No. 8979683010 */
         (*TxData++) = K_Line_Set.No_Digit1;
         (*TxData++) = K_Line_Set.No_Digit2;
         (*TxData++) = K_Line_Set.No_Digit3;
@@ -227,6 +231,7 @@ unsigned char kwp_writeDataByLocalIdentifier(unsigned char *TxData, unsigned cha
 {
     unsigned char Tx_Len = 0;
     unsigned char CupFlag = 0;
+
     if ((K_Line_Set.KLINE == 0) || ((K_Line_Set.KLINE == 1) && (K_LINE_SIGNAL_FLAG.SendSeedEQUSRecvSeed == 1)))
     {
         switch (RequestData[0]) /* */
@@ -679,6 +684,7 @@ unsigned char kwp_readDataByLocalIdentifier(unsigned char *TxData, unsigned char
 {
     unsigned char Tx_Len = 0;
     unsigned int ECUStatusCup = 0;
+
     switch (RequestData[0]) /* subFunction */
     {
     case 0x20: /* 应对ECE R13 */
@@ -1099,6 +1105,7 @@ unsigned char kwp_readDataByLocalIdentifier(unsigned char *TxData, unsigned char
 unsigned char kwp_readDataByCommonIdentifier(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     return Tx_Len;
 }
 /*-------------------------------------------------------------------------
@@ -1194,6 +1201,7 @@ unsigned char kwp_readDataAccessMode(unsigned char *TxData, unsigned char *Reque
 unsigned char kwp_StartroutInebykocalIdentifier(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     switch (RequestData[0]) /*  */
     {
     case 0x08: /*  */
@@ -1222,6 +1230,7 @@ unsigned char kwp_StartroutInebykocalIdentifier(unsigned char *TxData, unsigned
 unsigned char kwp_readDataStatusofDTC(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     switch (RequestData[0]) /* subFunction */
     {
     case 0x00: /*  */
@@ -1319,6 +1328,7 @@ unsigned char kwp_readDataStatusofDTC(unsigned char *TxData, unsigned char *Requ
 unsigned char kwp_ClearDiagnosticInformation(unsigned char *TxData, unsigned char *RequestData)
 {
     unsigned char Tx_Len = 0;
+
     switch (RequestData[0]) /* subFunction */
     {
     case 0xFF: /*  */
@@ -1432,6 +1442,14 @@ void Common_Set_DTCstatusCHGFFK_Flag(unsigned char Val)
     DTCstatusCHGFFK_Line = Val;
 }
 
+/*-------------------------------------------------------------------------
+* Function Name  : K_LINE_EOL_InitVal
+* Description    : k-line数据初始化
+* Input          :
+* Output         : None
+* Return         : None
+* onther         :
+--------------------------------------------------------------------------*/
 void K_LINE_EOL_InitVal(void)
 {
     K_Line_Set.Flag = 0x7AA7A55Au;
@@ -1488,26 +1506,27 @@ void K_LINE_EOL_InitVal(void)
     K_Line_Set.K_Line_LID51 = 0x01u; /* 01 工作模式 */
     K_Line_Set.K_Line_LID52 = 0x00u; /* 00 电子部件设定 */
 
-    K_Line_Set.No_Digit1    = 0x38u; //01
-    K_Line_Set.No_Digit2    = 0x39u; //02
-    K_Line_Set.No_Digit3    = 0x37u; //03
-    K_Line_Set.No_Digit4    = 0x39u; //04
-    K_Line_Set.No_Digit5    = 0x36u; //05
-    K_Line_Set.No_Digit6    = 0x38u; //06
-    K_Line_Set.No_Digit7    = 0x33u; //07
-    K_Line_Set.No_Digit8    = 0x30u; //08
-    K_Line_Set.No_Digit9    = 0x31u; //09
-    K_Line_Set.No_Digit10   = 0x30u; //10
-    K_Line_Set.ECUStatus1   = 0x00u; //11
-    K_Line_Set.ECUStatus2   = 0x00u; //12
-    K_Line_Set.ECUStatus3   = 0x00u; //13
-    K_Line_Set.ECUStatus4   = 0x00u; //14
-    K_Line_Set.ECUStatus5   = 0x00u; //15
-    K_Line_Set.METERCOUNT   = 0x00u; //16
-    K_Line_Set.NoOfDTCFF00  = 0x00u; //17
-    K_Line_Set.NoOfDTC8000  = 0x00u; //18
-    K_Line_Set.TesterECU    = 0x00u; //19
-    K_Line_Set.TesterECUCAN = 0x00u; //20
-    K_Line_Set.User_Light1  = 10u;
-    K_Line_Set.User_Light2  = 10u;
+    K_Line_Set.KLINE        = 0x00u;
+    K_Line_Set.No_Digit1    = 0x38u; /* 01 */
+    K_Line_Set.No_Digit2    = 0x39u; /* 02 */
+    K_Line_Set.No_Digit3    = 0x37u; /* 03 */
+    K_Line_Set.No_Digit4    = 0x39u; /* 04 */
+    K_Line_Set.No_Digit5    = 0x36u; /* 05 */
+    K_Line_Set.No_Digit6    = 0x38u; /* 06 */
+    K_Line_Set.No_Digit7    = 0x33u; /* 07 */
+    K_Line_Set.No_Digit8    = 0x30u; /* 08 */
+    K_Line_Set.No_Digit9    = 0x31u; /* 09 */
+    K_Line_Set.No_Digit10   = 0x30u; /* 10 */
+    K_Line_Set.ECUStatus1   = 0x00u; /* 11 */
+    K_Line_Set.ECUStatus2   = 0x00u; /* 12 */
+    K_Line_Set.ECUStatus3   = 0x00u; /* 13 */
+    K_Line_Set.ECUStatus4   = 0x00u; /* 14 */
+    K_Line_Set.ECUStatus5   = 0x00u; /* 15 */
+    K_Line_Set.METERCOUNT   = 0x00u; /* 16 */
+    K_Line_Set.NoOfDTCFF00  = 0x00u; /* 17 */
+    K_Line_Set.NoOfDTC8000  = 0x00u; /* 18 */
+    K_Line_Set.TesterECU    = 0x00u; /* 19 */
+    K_Line_Set.TesterECUCAN = 0x00u; /* 20 */
+    K_Line_Set.User_Light1  = 10u;   /*背光亮度等级*/
+    K_Line_Set.User_Light2  = 10u;   /*背光亮度等级*/
 }
\ No newline at end of file

source/Driver/Buzzer/Buzzer.c

@@ -136,7 +136,9 @@ void Buzzer_Play_ISR(void)
     if (BuzzerPlayCtrl.Mode)
     {
         if (BuzzerPlayCtrl.Timer)
+        {
             BuzzerPlayCtrl.Timer--;
+        }
 
         if (BuzzerPlayCtrl.Timer == 0)
         {
@@ -151,7 +153,9 @@ void Buzzer_Play_ISR(void)
                     TimerB_PWM_Channel_Start(BUZZER_PWM_CHANNEL);
                 }
                 else
+                {
                     TimerB_PWM_Channel_Stop(BUZZER_PWM_CHANNEL);
+                }
 
                 BuzzerPlayCtrl.Timer = SndTracks[BuzzerPlayCtrl.Track].Note[BuzzerPlayCtrl.Note].Interval * 20;
                 BuzzerPlayCtrl.Fade = SndTracks[BuzzerPlayCtrl.Track].Note[BuzzerPlayCtrl.Note].Fade * 20;
@@ -160,7 +164,9 @@ void Buzzer_Play_ISR(void)
             else
             {
                 if (BuzzerPlayCtrl.Mode == BUZZER_MODE_LOOP)
+                {
                     BuzzerPlayCtrl.Note = 0;
+                }
                 else
                 {
                     BUZZER_CTRL = 0;