Skip to content

V
VC66_7C
Commit 61479894 authored by hu's avatar hu
Browse files
Options

增加界面

parent f30f67ff
Hide whitespace changes
Inline Side-by-side
Showing with 24119 additions and 23817 deletions
ghs/project
View file @ 61479894
No preview for this file type
ghs/project.hex
View file @ 61479894
This source diff could not be displayed because it is too large. You can view the blob instead.
ghs/project.siz
View file @ 61479894
project .intvect 1536
project .text 303532
project .rodata 410071
project .text 304844
project .rodata 410871
project .secinfo 120
project .syscall 6
project .romdata 9045
......
source/Application/APP/Telltales/Telltales_user.c
View file @ 61479894
......@@ -71,24 +71,9 @@ void Telltales_Left_Right_KL30_Init(void)
TelltaleLRCtrl.LastLeft = 0u;
TelltaleLRCtrl.Delay = 0u;
}
/*
uint8_t LED_LEFT_F = 0x00u;
uint8_t LED_RIGHT_F = 0x00u;
uint8_t LED_HI_BEAM_F = 0x00u;
uint8_t LED_PowerLimit_F = 0x00u;
uint8_t LED_MotorInvertorOverTempFault_F = 0x00u;
uint8_t LED_BrakeLightFault_F = 0x00u;
uint8_t LED_BATTERY_CHARGE_F = 0x00u;
uint8_t LED_RearFogLight_F = 0x00u;
uint8_t LED_BattMAINTENANCE_F = 0x00u;
uint8_t LED_AUTOHOLD_F = 0x00u;
uint8_t LED_HDC_F = 0x00u;
uint8_t LED_HAC_F = 0x00u;
uint8_t LED_MAINTENANCE_F = 0x00u;
uint8_t LED_SEATBELT_F = 0x00u;
*/
/******************************************************************************
T3 L1 L2 L3 R1 R2 R3 U1 U4 U5无灯 左右转向单独 气压1 气压2 指示灯是背光
T3 L16 U1 U4 U5无灯 左右转向单独 气压1 气压2 指示灯是背光
******************************************************************************/
/******************************************************************************
......@@ -264,7 +249,7 @@ void LED_INTER_DIFF_LOCK_T_Execution(uint8_t led_status)
}
/******************************************************************************
T2 指示灯不受控
T2
信号接口：
信号定义：
输出信号：
......@@ -727,7 +712,7 @@ void LED_AUTO_LEVELING_T_Execution(uint8_t led_status)
}
/******************************************************************************
L4 ROWS
L1 ROWS
信号接口：
信号定义：
输出信号：
......@@ -771,7 +756,7 @@ void LED_ROWS_L_Execution(uint8_t led_status)
}
/******************************************************************************
L5 BSM OFF
L2 BSM OFF
信号接口：
信号定义：
输出信号：
......@@ -815,7 +800,7 @@ void LED_BSM_OFF_L_Execution(uint8_t led_status)
}
/******************************************************************************
L6 AEBS OFF
L3 AEBS OFF
信号接口：
信号定义：
输出信号：
......@@ -871,7 +856,7 @@ void LED_AEBS_OFF_L_Execution(uint8_t led_status)
}
/******************************************************************************
L7 LDWS
L4 LDWS
信号接口：
信号定义：
输出信号：
......@@ -935,7 +920,7 @@ void LED_LDWS_L_Execution(uint8_t led_status)
}
/******************************************************************************
L8 SRS
L5 SRS
信号接口：
信号定义：
输出信号：
......@@ -979,7 +964,7 @@ void LED_SRS_L_Execution(uint8_t led_status)
}
/******************************************************************************
L9 ENG OIL
L6 ENG OIL
信号接口：
信号定义：
输出信号：
......@@ -1022,7 +1007,7 @@ void LED_ENG_OIL_L_Execution(uint8_t led_status)
}
}
/******************************************************************************
L10 CHARG
L7 CHARG
信号接口：
信号定义：
输出信号：
......@@ -1066,7 +1051,7 @@ void LED_CHARG_L_Execution(uint8_t led_status)
}
/******************************************************************************
L11 SEAT BELT
L8 SEAT BELT
信号接口：
信号定义：
输出信号：
......@@ -1109,7 +1094,7 @@ void LED_SEAT_BELT_L_Execution(uint8_t led_status)
}
}
/******************************************************************************
L12 RR DIFF LOCK
L9 RR DIFF LOCK
信号接口：
信号定义：
输出信号：
......@@ -1153,7 +1138,7 @@ void LED_RR_DIFF_LOCK_L_Execution(uint8_t led_status)
}
/******************************************************************************
L13 TPMS
L10 TPMS
信号接口：
信号定义：
输出信号：
......@@ -1209,7 +1194,7 @@ void LED_TPMS_L_Execution(uint8_t led_status)
}
}
/******************************************************************************
L14 ASR/EVSC OFF
L11 ASR/EVSC OFF
信号接口：
信号定义：
输出信号：
......@@ -1253,7 +1238,7 @@ void LED_ASR_or_EVSC_OFF_L_Execution(uint8_t led_status)
}
/******************************************************************************
L15 EVSC
L12 EVSC
信号接口：
信号定义：
输出信号：
......@@ -1322,7 +1307,7 @@ void LED_EVSC_L_Execution(uint8_t led_status)
}
/******************************************************************************
L16 ECO STOP OFF
L13 ECO STOP OFF
信号接口：
信号定义：
输出信号：
......@@ -1374,7 +1359,7 @@ void LED_eco_stop_OFF_L_Execution(uint8_t led_status)
}
/******************************************************************************
L17 AMT
L14 AMT
信号接口：
信号定义：
输出信号：
......@@ -1430,7 +1415,7 @@ void LED_AMT_L_Execution(uint8_t led_status)
}
/******************************************************************************
L18 WEAR IND
L15 WEAR IND
信号接口：
信号定义：
输出信号：
......@@ -1474,16 +1459,16 @@ void LED_WEAR_IND_L_Execution(uint8_t led_status)
}
/******************************************************************************
R4 TRAILER BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_TRAILER_BRAKE_R_Judgement(void)
R1 PARK BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_PARK_BRAKE_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_TRAILER_BRAKE);
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_PARK_BRAKE);
if (m_Condition1 == 1u)
{
......@@ -1496,42 +1481,47 @@ uint8_t LED_TRAILER_BRAKE_R_Judgement(void)
return u8Result;
}
void LED_TRAILER_BRAKE_R_Execution(uint8_t led_status)
void LED_PARK_BRAKE_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL10 = LED_BRIGHTNESS;
IS31_CHIP0_CHANNEL08 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL10 = 0x00;
IS31_CHIP0_CHANNEL08 = 0x00;
}
if (led_status == 1)
{
SEG_LED_TRAILER_BRAKE_R(7);
SEG_LED_PARK_BRAKE_R(7);
}
else
{
SEG_LED_TRAILER_BRAKE_R(0);
SEG_LED_PARK_BRAKE_R(0);
}
}
/******************************************************************************
R5 BRAKE AIR/EBS
R2 BRAKE AIR/EBS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BRAKE_AIR_or_EBS_YELLOW_R_Judgement(void)
uint8_t LED_BRAKE_AIR_or_EBS_RED_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18F0010B_Sig_ABSorEBS_AmberWarnSt_power_veh();
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
if (m_Condition1 == 1u)
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_BRAKE_AIR_EBS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_ABS_Fully_Operational();
m_Condition3 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Red_Warning_Lamp_State();
if ((m_Condition1 == 1u) || (m_Condition2 == 0u) || (m_Condition3 == 1u))
{
u8Result = 0u;
u8Result = 1u;
}
else
{
......@@ -1540,38 +1530,31 @@ uint8_t LED_BRAKE_AIR_or_EBS_YELLOW_R_Judgement(void)
return u8Result;
}
void LED_BRAKE_AIR_or_EBS_YELLOW_R_Execution(uint8_t led_status)
void LED_BRAKE_AIR_or_EBS_RED_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL09 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL09 = 0x00;
}
BRAKE_AIR_EBS_LED_MCU = led_status;
if (led_status == 1)
{
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(7);
SEG_LED_BRAKE_AIR_or_EBS_RED_R(7);
}
else
{
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(0);
SEG_LED_BRAKE_AIR_or_EBS_RED_R(0);
}
}
/******************************************************************************
R6 ACC AIR
R3 BRAKE LOCK
信号接口：
信号定义：
输出信号： R6_LED_OUT
输出信号：
******************************************************************************/
uint8_t LED_ACC_AIR_R_Judgement(void)
uint8_t LED_BRAKE_LOCK_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ACC_AIR);
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
......@@ -1584,36 +1567,40 @@ uint8_t LED_ACC_AIR_R_Judgement(void)
return u8Result;
}
void LED_ACC_AIR_R_Execution(uint8_t led_status)
void LED_BRAKE_LOCK_R_Execution(uint8_t led_status)
{
R6_LED_OUT = led_status;
if (led_status == 1)
{
IS31_CHIP0_CHANNEL07 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL07 = 0x00;
}
if (led_status == 1)
{
SEG_LED_ACC_AIR_R(7);
SEG_LED_BRAKE_LOCK_R(7);
}
else
{
SEG_LED_ACC_AIR_R(0);
SEG_LED_BRAKE_LOCK_R(0);
}
}
/******************************************************************************
R7 ABS
R4 AIR SUS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_ABS_R_Judgement(void)
uint8_t LED_AIR_SUS_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ABS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_ABSorEBS_AmberWarnSt_power_veh();
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_AIR_SUS);
if ((m_Condition1 == 1u) || (m_Condition2 == 1u))
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
......@@ -1624,31 +1611,38 @@ uint8_t LED_ABS_R_Judgement(void)
return u8Result;
}
void LED_ABS_R_Execution(uint8_t led_status)
void LED_AIR_SUS_R_Execution(uint8_t led_status)
{
ABS_LED_MCU_OUT = led_status;
if (led_status == 1)
{
IS31_CHIP0_CHANNEL06 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL06 = 0x00;
}
if (led_status == 1)
{
SEG_LED_ABS_R(7);
SEG_LED_AIR_SUS_R(7);
}
else
{
SEG_LED_ABS_R(0);
SEG_LED_AIR_SUS_R(0);
}
}
/******************************************************************************
R8 PARK BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_PARK_BRAKE_R_Judgement(void)
R5 TRAILER BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_TRAILER_BRAKE_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_PARK_BRAKE);
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_TRAILER_BRAKE);
if (m_Condition1 == 1u)
{
......@@ -1661,47 +1655,42 @@ uint8_t LED_PARK_BRAKE_R_Judgement(void)
return u8Result;
}
void LED_PARK_BRAKE_R_Execution(uint8_t led_status)
void LED_TRAILER_BRAKE_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL08 = LED_BRIGHTNESS;
IS31_CHIP0_CHANNEL10 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL08 = 0x00;
IS31_CHIP0_CHANNEL10 = 0x00;
}
if (led_status == 1)
{
SEG_LED_PARK_BRAKE_R(7);
SEG_LED_TRAILER_BRAKE_R(7);
}
else
{
SEG_LED_PARK_BRAKE_R(0);
SEG_LED_TRAILER_BRAKE_R(0);
}
}
/******************************************************************************
R9 BRAKE AIR/EBS
R6 BRAKE AIR/EBS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BRAKE_AIR_or_EBS_RED_R_Judgement(void)
uint8_t LED_BRAKE_AIR_or_EBS_YELLOW_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_BRAKE_AIR_EBS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_ABS_Fully_Operational();
m_Condition3 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Red_Warning_Lamp_State();
m_Condition1 = (uint8_t)Get_ID_18F0010B_Sig_ABSorEBS_AmberWarnSt_power_veh();
if ((m_Condition1 == 1u) || (m_Condition2 == 0u) || (m_Condition3 == 1u))
if (m_Condition1 == 1u)
{
u8Result = 1u;
u8Result = 0u;
}
else
{
......@@ -1710,31 +1699,38 @@ uint8_t LED_BRAKE_AIR_or_EBS_RED_R_Judgement(void)
return u8Result;
}
void LED_BRAKE_AIR_or_EBS_RED_R_Execution(uint8_t led_status)
void LED_BRAKE_AIR_or_EBS_YELLOW_R_Execution(uint8_t led_status)
{
BRAKE_AIR_EBS_LED_MCU = led_status;
if (led_status == 1)
{
IS31_CHIP0_CHANNEL09 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL09 = 0x00;
}
if (led_status == 1)
{
SEG_LED_BRAKE_AIR_or_EBS_RED_R(7);
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(7);
}
else
{
SEG_LED_BRAKE_AIR_or_EBS_RED_R(0);
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(0);
}
}
/******************************************************************************
R10 BRAKE LOCK
R7 ACC AIR
信号接口：
信号定义：
输出信号：
输出信号： R6_LED_OUT
******************************************************************************/
uint8_t LED_BRAKE_LOCK_R_Judgement(void)
uint8_t LED_ACC_AIR_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ACC_AIR);
if (m_Condition1 == 1u)
{
......@@ -1747,40 +1743,36 @@ uint8_t LED_BRAKE_LOCK_R_Judgement(void)
return u8Result;
}
void LED_BRAKE_LOCK_R_Execution(uint8_t led_status)
void LED_ACC_AIR_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL07 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL07 = 0x00;
}
R6_LED_OUT = led_status;
if (led_status == 1)
{
SEG_LED_BRAKE_LOCK_R(7);
SEG_LED_ACC_AIR_R(7);
}
else
{
SEG_LED_BRAKE_LOCK_R(0);
SEG_LED_ACC_AIR_R(0);
}
}
/******************************************************************************
R11 AIR SUS
R8 ABS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_AIR_SUS_R_Judgement(void)
uint8_t LED_ABS_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_AIR_SUS);
uint8_t m_Condition2 = 0u;
if (m_Condition1 == 1u)
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ABS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_ABSorEBS_AmberWarnSt_power_veh();
if ((m_Condition1 == 1u) || (m_Condition2 == 1u))
{
u8Result = 1u;
}
......@@ -1791,24 +1783,17 @@ uint8_t LED_AIR_SUS_R_Judgement(void)
return u8Result;
}
void LED_AIR_SUS_R_Execution(uint8_t led_status)
void LED_ABS_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL06 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL06 = 0x00;
}
ABS_LED_MCU_OUT = led_status;
if (led_status == 1)
{
SEG_LED_AIR_SUS_R(7);
SEG_LED_ABS_R(7);
}
else
{
SEG_LED_AIR_SUS_R(0);
SEG_LED_ABS_R(0);
}
}
......
source/Application/CAN_APP_NM/CAN_App/CAN_FUNC.c
View file @ 61479894
#include "CAN_FUNC.h"
#include "CAN_Communication_Matrix.h"
/*增加外发计算部分引用文件*/
#include "Common_Interface.h"
#include "Gauges.h"
......@@ -18,24 +18,24 @@
#include "Data_Fuel_User.h"
#include "Line_in.h"
/*---------------------------------------------------------------------------
使用しない Byte、bit に関しては全て 1(B)をセットして出力すること
对于不使用的Byte、bit，全部设置1(B)并输出
----------------------------------------------------------------------------*/
USER_ECU User_ECU;
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FEAE17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
//0～FA:0～2000 [kPa] FB～FF:Not used // Factor:8
uint8_t Main_Air_Pressure : 8 ;//WET 预留
......@@ -58,21 +58,21 @@ typedef union
uint8_t Rader_Stain_Information : 2 ;
uint8_t Not_used5 : 2 ;
uint8_t Parking_Brake_Switch : 2 ;
}bit;
}_Msg18FEAE17Map;
} bit;
} _Msg18FEAE17Map;
void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FEAE17Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
MsgMap.bit.Service_Brake_Circuit1_AirPressure = (uint8_t)(AirPressure_Get_kPa(0) >> 3) ;
MsgMap.bit.Service_Brake_Circuit2_AirPressure = (uint8_t)(AirPressure_Get_kPa(1) >> 3) ;
if(RTE_Read_KL30_Valid())
if (RTE_Read_KL30_Valid())
{
MsgMap.bit.Power_Supply_Voltage_L = (uint8_t)(RTE_Read_KL30_Voltage() / 50);
......@@ -84,8 +84,8 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
MsgMap.bit.Power_Supply_Voltage_L = 0;
MsgMap.bit.Power_Supply_Voltage_H = 0;
}
if(Line_In_Get_Status(LINE_IN_PARK_BRAKE))
if (Line_In_Get_Status(LINE_IN_PARK_BRAKE))
{
MsgMap.bit.Parking_Brake_Switch = 1 ;
}
......@@ -94,7 +94,7 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
MsgMap.bit.Parking_Brake_Switch = 0 ;
}
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -102,16 +102,16 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FF3E17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint16_t Pulse_Correction_Facor : 16 ;
......@@ -139,36 +139,36 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
uint8_t TURN_L_Lamp_Status : 1 ;
uint8_t Not_used9 : 1 ;
uint8_t Not_used10 : 1 ;
}bit;
}_Msg18FF3E17Map;
} bit;
} _Msg18FF3E17Map;
void Can_Set_Buff_18FF3E17(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FF3E17Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FED917
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t Not_used0 : 4 ;
uint8_t BlendingSwitchPosition : 2 ;
......@@ -186,20 +186,20 @@ typedef union
uint8_t Not_used7 : 8 ;
uint8_t Not_used8 : 8 ;
}bit;
}_Msg18FED917Map;
} bit;
} _Msg18FED917Map;
void Can_Set_Buff_18FED917(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FED917Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -207,16 +207,16 @@ void Can_Set_Buff_18FED917(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FEE617
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t Seconds : 8 ;//Factor 0.25
uint8_t Minutes : 8 ;
......@@ -226,13 +226,13 @@ typedef union
uint8_t Year : 8 ;//Offset 1985
uint8_t Not_used : 8 ;
uint8_t Not_used1 : 8 ;
}bit;
}_Msg18FEE617Map;
} bit;
} _Msg18FEE617Map;
void Can_Set_Buff_18FEE617(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FEE617Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
......@@ -242,39 +242,40 @@ void Can_Set_Buff_18FEE617(uint8_t CopyData [])
MsgMap.bit.Hours = Get_RTC_HOUR();
MsgMap.bit.Day = Get_RTC_DATE() << 2 ;
MsgMap.bit.Month = Get_RTC_MONTH();
MsgMap.bit.Year = Get_RTC_YEAR() + 15;
MsgMap.bit.Year = Get_RTC_YEAR() + 15;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18EF1817
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
const uint8_t IDAE17_TYTE_DATA[ID18FEAE17_TYPE_MAX] = {0x50,0x51,0x52,0x53,0x54,0x60,0x61,0x62,0x63,0x64,0x20,0x22,0x30};
static const uint8_t IDAE17_SendOrder[ID18FEAE17_TYPE_MAX][2U] =
{ // A B
{ID_AlarmThreshold ,ID_TripA_AvrFuelCost },
{ID_TripA_AvrFuelCost ,ID_TripA_AvrSpeed },
{ID_TripA_AvrSpeed ,ID_TripA_ConsDyeingFee },
{ID_TripA_ConsDyeingFee ,ID_TripA_IdleSpeedTime },
{ID_TripA_IdleSpeedTime ,ID_TripA_RunTime },
{ID_TripA_RunTime ,ID_TripB_AvrFuelCost },
{ID_TripB_AvrFuelCost ,ID_TripB_AvrSpeed },
{ID_TripB_AvrSpeed ,ID_TripB_ConsDyeingFee },
{ID_TripB_ConsDyeingFee ,ID_TripB_IdleSpeedTime },
{ID_TripB_IdleSpeedTime ,ID_TripB_RunTime },
{ID_TripB_RunTime ,ID_ResidualDistance },
{ID_ResidualDistance ,ID_HowMany },
{ID_HowMany ,ID_AlarmThreshold },
const uint8_t IDAE17_TYTE_DATA[ID18FEAE17_TYPE_MAX] = {0x50, 0x51, 0x52, 0x53, 0x54, 0x60, 0x61, 0x62, 0x63, 0x64, 0x20, 0x22, 0x30};
static const uint8_t IDAE17_SendOrder[ID18FEAE17_TYPE_MAX][2U] =
{
// A B
{ID_AlarmThreshold , ID_TripA_AvrFuelCost },
{ID_TripA_AvrFuelCost , ID_TripA_AvrSpeed },
{ID_TripA_AvrSpeed , ID_TripA_ConsDyeingFee },
{ID_TripA_ConsDyeingFee , ID_TripA_IdleSpeedTime },
{ID_TripA_IdleSpeedTime , ID_TripA_RunTime },
{ID_TripA_RunTime , ID_TripB_AvrFuelCost },
{ID_TripB_AvrFuelCost , ID_TripB_AvrSpeed },
{ID_TripB_AvrSpeed , ID_TripB_ConsDyeingFee },
{ID_TripB_ConsDyeingFee , ID_TripB_IdleSpeedTime },
{ID_TripB_IdleSpeedTime , ID_TripB_RunTime },
{ID_TripB_RunTime , ID_ResidualDistance },
{ID_ResidualDistance , ID_HowMany },
{ID_HowMany , ID_AlarmThreshold },
};
//Byte：6为最高级别Byte，Byte：3为最低级别Byte
void Can_Set_Buff_18EF1817(uint8_t CopyData [])
......@@ -282,14 +283,14 @@ void Can_Set_Buff_18EF1817(uint8_t CopyData [])
static uint8_t Count = 0 ;
uint8_t Type ;
uint8_t i = 0 ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = 0xff ;
}
Meter_RequestCode_Update();
CopyData[ 0 ] = Get_Meter_RequestCode();
if(Get_Meter_RequestID() == METER_CODE_DATA_T_REQ)
if (Get_Meter_RequestID() == METER_CODE_DATA_T_REQ)
{
//A
Type = IDAE17_SendOrder[Count][0];
......@@ -298,7 +299,7 @@ void Can_Set_Buff_18EF1817(uint8_t CopyData [])
CopyData[ 1 ] = IDAE17_TYTE_DATA[Type] ;
if(Get_ECU_RespSure())
if (Get_ECU_RespSure())
{
CopyData[ 2 ] = (uint8_t)Get_ECU_Data(Type);
CopyData[ 3 ] = (uint8_t)(Get_ECU_Data(Type) >> 8);
......@@ -312,10 +313,10 @@ void Can_Set_Buff_18EF1817(uint8_t CopyData [])
CopyData[ 4 ] = 0xff ;
CopyData[ 5 ] = 0xff ;
}
}
Count ++ ;
if(Count >= ID18FEAE17_TYPE_MAX)
if (Count >= ID18FEAE17_TYPE_MAX)
{
Count = 0 ;
}
......@@ -323,13 +324,13 @@ void Can_Set_Buff_18EF1817(uint8_t CopyData [])
else
{
CopyData[ 1 ] = IDAE17_TYTE_DATA[Get_Meter_RequestType()] ;
if(Get_ECU_RespSure())
if (Get_ECU_RespSure())
{
Set_Meter_RequestCode(METER_CODE_DATA_T_REQ,ID_TripA_AvrFuelCost,0);
Set_Meter_RequestCode(METER_CODE_DATA_T_REQ, ID_TripA_AvrFuelCost, 0);
}
else
{
CopyData[ 2 ] = (uint8_t)Get_Meter_RequestData(Type);
CopyData[ 3 ] = (uint8_t)(Get_Meter_RequestData(Type) >> 8);
CopyData[ 4 ] = (uint8_t)(Get_Meter_RequestData(Type) >> 16);
......@@ -339,21 +340,21 @@ void Can_Set_Buff_18EF1817(uint8_t CopyData [])
//0xFF固定送信
CopyData[ 6 ] = 0xff ;
CopyData[ 7 ] = 0xff ;
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FEE017
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
//uint32_t Not_used : 32 ;
//uint32_t Total_Vehicle_Distance : 32 ; //Factor 0.125
......@@ -365,20 +366,20 @@ typedef union
uint8_t : 8 ;
uint8_t : 8 ;
uint8_t : 8 ;
}bit;
}_Msg18FEE017Map;
} bit;
} _Msg18FEE017Map;
void Can_Set_Buff_18FEE017(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FEE017Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
//MsgMap.bit.Total_Vehicle_Distance = (Data_ODO_Read()/10) << 3 ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -386,16 +387,16 @@ void Can_Set_Buff_18FEE017(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FEFC17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t WasherFluidLevel : 8 ;//Factor 0.4
uint8_t FuelLevel_1 : 8 ;//Factor 0.4
......@@ -404,20 +405,20 @@ typedef union
uint16_t CargoAmbientTemperature : 16;//Factor 0.03125 Offset -273
uint8_t FuelLevel_2 : 8 ;//Factor 0.4
uint8_t EngOilFilterDiffPressure_ExtRange : 8 ;//Factor 5
}bit;
}_Msg18FEFC17Map;
} bit;
} _Msg18FEFC17Map;
void Can_Set_Buff_18FEFC17(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FEFC17Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -425,16 +426,16 @@ void Can_Set_Buff_18FEFC17(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FF2517
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t Year : 8 ;//0～63: 0～99 [Year]
uint8_t Month : 8 ;//1～C: 1～12 [Month]
......@@ -444,13 +445,13 @@ typedef union
uint8_t ODOMeter_L : 8 ;
uint8_t ODOMeter_M : 8 ;
uint8_t ODOMeter_H : 8 ;
}bit;
}_Msg18FF2517Map;
} bit;
} _Msg18FF2517Map;
void Can_Set_Buff_18FF2517(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FF2517Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
......@@ -461,11 +462,11 @@ void Can_Set_Buff_18FF2517(uint8_t CopyData [])
MsgMap.bit.Day = Get_RTC_DATE() ;
MsgMap.bit.Year = Get_RTC_YEAR() ;
MsgMap.bit.Minute = Get_RTC_MINUTE() ;
MsgMap.bit.ODOMeter_L = (uint8_t)(Data_ODO_Read()/10) ;
MsgMap.bit.ODOMeter_M = (uint8_t)((Data_ODO_Read()/10) >> 8) ;
MsgMap.bit.ODOMeter_H = (uint8_t)((Data_ODO_Read()/10) >> 16) ;
MsgMap.bit.ODOMeter_L = (uint8_t)(Data_ODO_Read() / 10) ;
MsgMap.bit.ODOMeter_M = (uint8_t)((Data_ODO_Read() / 10) >> 8) ;
MsgMap.bit.ODOMeter_H = (uint8_t)((Data_ODO_Read() / 10) >> 16) ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -473,16 +474,16 @@ void Can_Set_Buff_18FF2517(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FF2A17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t Meter_Malfunction : 2 ;
uint8_t Over_Heat_Warning_Status : 1 ;
......@@ -542,8 +543,8 @@ typedef union
uint8_t IRIS_Warning_Lamp_Status : 1 ;
uint8_t Range_Air_Cut_Warning : 1 ;
uint8_t MJX_MEB9_Manual_TM_Range_Low : 1 ;
}bit;
}_Msg18FF2A17Map;
} bit;
} _Msg18FF2A17Map;
void Can_Set_Buff_18FF2A17(uint8_t CopyData [])
{
......@@ -552,48 +553,49 @@ void Can_Set_Buff_18FF2A17(uint8_t CopyData [])
uint16_t Voltage = 0 ;
Ign_Time = Common_GetIgnOnTime();
_Msg18FF2A17Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
//Byte:0
if(Coolant_Get_Valid())
//Byte:0
if (Coolant_Get_Valid())
{
if(Ign_Time < 3000)
if (Ign_Time < 3000)
{
MsgMap.bit.Water_Temp_Level = 0 ;
MsgMap.bit.Over_Heat_Warning_Status = 0 ;
}
else
{
if(Coolant_Get_CurSeg() <= 10)
if (Coolant_Get_CurSeg() <= 10)
{
MsgMap.bit.Water_Temp_Level = 0 ;
MsgMap.bit.Over_Heat_Warning_Status = 0 ;
}
else if(Coolant_Get_CurSeg() == 11 || Coolant_Get_CurSeg() == 12)
else if (Coolant_Get_CurSeg() == 11 || Coolant_Get_CurSeg() == 12)
{
MsgMap.bit.Water_Temp_Level = 1 ;
MsgMap.bit.Water_Temp_Level = 1 ;
MsgMap.bit.Over_Heat_Warning_Status = 1 ;
}
}
}
else
{
MsgMap.bit.Water_Temp_Level = 2 ;
MsgMap.bit.Over_Heat_Warning_Status = 0 ;
}
}
//Get_Voltmeter_Valid();
if(Get_Voltmeter_AvrVoltage())
{//0x00～0xFA : 9～34 [V]
Voltage = Get_Voltmeter_AvrVoltage();
if (Get_Voltmeter_AvrVoltage())
{
//0x00～0xFA : 9～34 [V]
Voltage = Get_Voltmeter_AvrVoltage();
Voltage += 50 ;
Voltage /= 100 ;
if(Voltage >= 90)
if (Voltage >= 90)
{
Voltage -= 90 ;
}
......@@ -601,27 +603,27 @@ void Can_Set_Buff_18FF2A17(uint8_t CopyData [])
{
Voltage = 0 ;
}
}
MsgMap.bit.IGN_Voltage = Voltage ;
}
MsgMap.bit.IGN_Voltage = Voltage ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FF9D17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t Fuel_Level : 8 ;//0～64:0～100[%] FE:failure
uint8_t NotUsed : 8 ;
......@@ -631,20 +633,20 @@ typedef union
uint8_t NotUsed4 : 8 ;
uint8_t NotUsed5 : 8 ;
uint8_t NotUsed6 : 8 ;
}bit;
}_Msg18FF9D17Map;
} bit;
} _Msg18FF9D17Map;
void Can_Set_Buff_18FF9D17(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FF9D17Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
MsgMap.bit.Fuel_Level = Fuel_Get_Percent() ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
......@@ -652,46 +654,46 @@ void Can_Set_Buff_18FF9D17(uint8_t CopyData [])
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18FFE517
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : Event triggered
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t DTC_Clear_Request : 8 ;
uint8_t Req_0Point : 8 ;
uint8_t System_Demonstration_Request : 7 ;
uint8_t Ferry_Mode_Cancel : 1 ;
uint8_t Ferry_Mode_Cancel : 1 ;
uint8_t Not_used : 8 ;
uint8_t Not_used1 : 8 ;
uint8_t Not_used2 : 8 ;
uint8_t Not_used3 : 8 ;
uint8_t Not_used4 : 8 ;
}bit;
}_Msg18FFE517Map;
} bit;
} _Msg18FFE517Map;
void Can_Set_Buff_18FFE517(uint8_t CopyData [])
{
uint8_t i ;
_Msg18FFE517Map MsgMap ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
MsgMap.Data[ i ] = 0xff ;
}
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = MsgMap.Data[ i ] ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18EF2D17
* Description :
* Description :
* Input : None
* Output : None
* Return : None
......@@ -700,58 +702,58 @@ void Can_Set_Buff_18FFE517(uint8_t CopyData [])
void Can_Set_Buff_18EF2D17(uint8_t CopyData [])
{
uint8_t i ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = 0xff ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_18033317
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t PairCmd : 8 ;
uint8_t TireNumber : 8 ;
uint8_t Not_used : 8 ;
uint8_t Not_used1 : 8 ;
uint8_t Not_used2 : 8 ;
uint8_t Not_used3 : 8 ;
uint8_t Not_used4 : 8 ;
uint8_t Not_used5 : 8 ;
}bit;
}_Msg18033317Map;
} bit;
} _Msg18033317Map;
void Can_Set_Buff_18033317(uint8_t CopyData [])
{
uint8_t i ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = 0xff ;
}
}
/*-------------------------------------------------------------------------
* Function Name : Can_Set_Buff_180433A2
* Description :
* Description :
* Input : None
* Output : None
* Return : None
* onther : None
--------------------------------------------------------------------------*/
typedef union
typedef union
{
uint8_t Data[8] ;
struct
struct
{
uint8_t SetupCmd : 8 ;
uint8_t Not_used : 8 ;
uint8_t Not_used1 : 8 ;
uint8_t Not_used2 : 8 ;
......@@ -759,15 +761,138 @@ typedef union
uint8_t Not_used4 : 8 ;
uint8_t Not_used5 : 8 ;
uint8_t Not_used6 : 8 ;
}bit;
}_Msg180433A2Map;
} bit;
} _Msg180433A2Map;
void Can_Set_Buff_180433A2(uint8_t CopyData [])
{
uint8_t i ;
for(i = 0 ;i < 8 ;i ++)
for (i = 0 ; i < 8 ; i ++)
{
CopyData[ i ] = 0xff ;
}
}
/*CAN接收处理*/
void Drive_Info_IC1_STATUS_Rx(void)
{
uint32_t Temp = 0u;
uint8_t Data_Sig = 0u;
uint8_t Data_Type = 0u;
Data_Sig = Get_ID_18EF1718_Sig_Response_Code();
Data_Type = Get_ID_18EF1718_Sig_Data_Type();
Temp = Get_ID_18EF1718_Sig_Date();
switch (Data_Sig)
{
case 0x81:
switch (Data_Type)
{
case 0x50 :
User_ECU.TripA_Fuel = Temp ;
break;
case 0x51 :
User_ECU.TripA_Average_Speed = Temp ;
break;
case 0x52 :
User_ECU.TripA_Fuel_Consume = Temp ;
break;
case 0x53 :
User_ECU.TripA_Idling = Temp ;
break;
case 0x54 :
User_ECU.TripA_Runing = Temp ;
break;
case 0x60 :
User_ECU.TripB_Fuel = Temp ;
break;
case 0x61 :
User_ECU.TripB_Average_Speed = Temp ;
break;
case 0x62 :
User_ECU.TripB_Fuel_Consume = Temp ;
break;
case 0x63 :
User_ECU.TripB_Idling = Temp ;
break;
case 0x64 :
User_ECU.TripB_Runing = Temp ;
break;
case 0x22 :
User_ECU.Engine_Surplus = Temp ;
break;
default:
break;
}
break;
case 0x40:
switch (Data_Type)
{
case 0x50 :
User_ECU.TripA_Fuel = Temp ;
break;
case 0x51 :
User_ECU.TripA_Average_Speed = Temp ;
break;
case 0x52 :
User_ECU.TripA_Fuel_Consume = Temp ;
break;
case 0x53 :
User_ECU.TripA_Idling = Temp ;
break;
case 0x54 :
User_ECU.TripA_Runing = Temp ;
break;
case 0x60 :
User_ECU.TripB_Fuel = Temp ;
break;
case 0x61 :
User_ECU.TripB_Average_Speed = Temp ;
break;
case 0x62 :
User_ECU.TripB_Fuel_Consume = Temp ;
break;
case 0x63 :
User_ECU.TripB_Idling = Temp ;
break;
case 0x64 :
User_ECU.TripB_Runing = Temp ;
break;
case 0x22 :
User_ECU.Engine_Surplus = Temp ;
break;
default:
break;
}
break;
default:
break;
}
//if (State_Flag.FState_COilTimeOut < FState_COilTimeOutNum)
//{
// State_Flag.FState_COilTimeOut++;
//}
//if (Data_Sig == 0x40u)
//{
// State_Flag.FState_ClearOilRx == 1;
//}
}
uint32_t Common_Data_Get_TripA_Fuel(void)
{
return User_ECU.TripA_Fuel ;
}
uint32_t Common_Data_Get_TripA_Average_Speed(void)
{
return User_ECU.TripA_Average_Speed ;
}
uint32_t Common_Data_Get_TripB_Fuel(void)
{
return User_ECU.TripB_Fuel ;
}
uint32_t Common_Data_Get_TripB_Average_Speed(void)
{
return User_ECU.TripB_Average_Speed ;
}
source/Application/CAN_APP_NM/CAN_App/CAN_FUNC.h
View file @ 61479894
......@@ -3,9 +3,25 @@
#include "TYW_stdint.h"
typedef struct
{
uint32_t TripA_Fuel ;
uint32_t TripA_Average_Speed ;
uint32_t TripA_Fuel_Consume ;
uint32_t TripA_Idling ;
uint32_t TripA_Runing ;
uint32_t TripB_Fuel ;
uint32_t TripB_Average_Speed ;
uint32_t TripB_Fuel_Consume ;
uint32_t TripB_Idling ;
uint32_t TripB_Runing ;
uint32_t Engine_Surplus ;
} USER_ECU;
extern USER_ECU User_ECU;
extern void Can_Set_Buff_18FEAE17(uint8_t CopyData []) ;
extern void Can_Set_Buff_18FF3E17(uint8_t CopyData []) ;
extern void Can_Set_Buff_18FED917(uint8_t CopyData []) ;
......@@ -31,4 +47,13 @@ extern void Can_Set_Buff_18EF2D17(uint8_t CopyData []) ;
extern void Can_Set_Buff_18033317(uint8_t CopyData []) ;
extern void Can_Set_Buff_180433A2(uint8_t CopyData []) ;
void Drive_Info_IC1_STATUS_Rx(void);
uint32_t Common_Data_Get_TripA_Fuel(void);
uint32_t Common_Data_Get_TripA_Average_Speed(void);
uint32_t Common_Data_Get_TripB_Fuel(void);
uint32_t Common_Data_Get_TripB_Average_Speed(void);
#endif
\ No newline at end of file
source/Application/Graphic/GUI/GUI.c
View file @ 61479894
......@@ -22,6 +22,10 @@
#include "Flash_synchronizer.h"
#include "Popups.h"
#include "Data_Fuel_User.h"
#include "CAN_FUNC.h"
#define TRAPA 0u
#define TRAPB 1u
volatile _Display_State_Flag State_Flag;
......@@ -455,7 +459,7 @@ void Gui_TRIPA_Display(uint8_t Mode)
/*显示 TRIP A 的数值*/
GUI_General_Digit_Display(TRIP_Sprite, TRIPA_value, Nb_19_0, 5u, 3u, GUI_DISP_TRIPA, 389, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(TRIP_Sprite, CN_TRIP_danwei, GUI_BLENDMODE_SRC_OVER); /*显示文字 “ km ”*/
GUI_General_Display(TRIP_Sprite, CN_PJchesu_kmh, GUI_BLENDMODE_SRC_OVER); /*显示文字 “ km ”*/
}
else
{
......@@ -479,7 +483,7 @@ void Gui_TRIPB_Display(uint8_t Mode)
/*显示 TRIP B 的数值*/
GUI_General_Digit_Display(TRIP_Sprite, TRIPB_value, Nb_19_0, 5u, 3u, GUI_DISP_TRIPA, 389, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(TRIP_Sprite, CN_TRIP_danwei, GUI_BLENDMODE_SRC_OVER); /*显示文字 “ km ”*/
GUI_General_Display(TRIP_Sprite, CN_PJchesu_kmh, GUI_BLENDMODE_SRC_OVER); /*显示文字 “ km ”*/
}
else
{
......@@ -555,10 +559,9 @@ void Gui_ADAS_Display(uint8_t Mode)
/*车*/
GUI_General_Display(ADAS_Sprite, CN_che_shanshuo, GUI_BLENDMODE_SRC_OVER);
/*道*/
GUI_General_Display(ADAS_Sprite, CN_Road4_shanshuo, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road3_shanshuo, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road2_shanshuo, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road1_shanshuo, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road2_shanshuo, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road3_shanshuo, GUI_BLENDMODE_SRC_OVER);
}
else
{
......@@ -574,14 +577,12 @@ void Gui_ADAS_Display(uint8_t Mode)
ADAS_Value = 2u;
switch (ADAS_Value)
{
case 4u:
GUI_General_Display(ADAS_Sprite, CN_Road4, GUI_BLENDMODE_SRC_OVER);
case 3u:
GUI_General_Display(ADAS_Sprite, CN_Road3, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road1, GUI_BLENDMODE_SRC_OVER);
case 2u:
GUI_General_Display(ADAS_Sprite, CN_Road2, GUI_BLENDMODE_SRC_OVER);
case 1u:
GUI_General_Display(ADAS_Sprite, CN_Road1, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(ADAS_Sprite, CN_Road3, GUI_BLENDMODE_SRC_OVER);
break;
default:
break;
......@@ -787,16 +788,26 @@ void GUI_AVG_FuelSpeed_Display(uint8_t Mode)
}
else if (Mode == GUI_DISP_MODE_BLANK)
{
GUI_General_Display(MultiPurpose_Sprite, CN_TRIPAB, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(MultiPurpose_Sprite, CN_PJyouhao, GUI_BLENDMODE_SRC_OVER);
GUI_General_Display(MultiPurpose_Sprite, CN_PJchesu, GUI_BLENDMODE_SRC_OVER);
switch (0u)
{
case 0:
GUI_Translate_Display(MultiPurpose_Sprite, CN_TRIP, 400u, 217u, GUI_BLENDMODE_SRC_OVER);
GUI_Translate_Display(MultiPurpose_Sprite, CN_TRIP_A, 475u, 223u, GUI_BLENDMODE_SRC_OVER);
case TRAPA:
GUI_General_Display(MultiPurpose_Sprite, CN_TRIPAB_A, GUI_BLENDMODE_SRC_OVER);
GUI_Drive_Info_Avg_Speed_Display(TRAPA);
GUI_Drive_Info_Avg_Fuel_Display(TRAPA);
break;
case 1:
GUI_Translate_Display(MultiPurpose_Sprite, CN_TRIP, 400u, 217u, GUI_BLENDMODE_SRC_OVER);
GUI_Translate_Display(MultiPurpose_Sprite, CN_TRIP_B, 475u, 223u, GUI_BLENDMODE_SRC_OVER);
case TRAPB:
GUI_General_Display(MultiPurpose_Sprite, CN_TRIPAB_B, GUI_BLENDMODE_SRC_OVER);
GUI_Drive_Info_Avg_Speed_Display(TRAPB);
GUI_Drive_Info_Avg_Fuel_Display(TRAPB);
break;
default:
break;
}
......@@ -815,9 +826,10 @@ void GUI_AVG_FuelSpeed_Display(uint8_t Mode)
* Return : None
* onther : 区域
--------------------------------------------------------------------------*/
void GUI_Drive_Info_Avg_Speed_Display(uint8_t Valid, uint16_t Speed)
void GUI_Drive_Info_Avg_Speed_Display(uint16_t Speed)
{
uint8_t CanStatus1 = 0u;
uint32_t Average_Speed = 0;
CanStatus1 = CAN_MSG_Status(ID_CanMsg18EF1718_Msg_Count);
......@@ -827,82 +839,60 @@ void GUI_Drive_Info_Avg_Speed_Display(uint8_t Valid, uint16_t Speed)
}
else
{
#if 0
/*单位切换*/
if (User_App.User_Company == 1)
TFT_LCD_Display_Sprite(LAYER_Trip5, SN_D_05_X386_Y188_png, 386, 188, 64); /*km/H*/
else
if (1)
{
if (Speed == TRAPB) /*Trip B*/
TFT_LCD_Display_Sprite(LAYER_Trip5, SN_D_06_X386_Y188_png, 386, 188, 64); /*MPH*/
else /*Trip A ODO*/
TFT_LCD_Display_Sprite(LAYER_Trip5, SN_D_06_X386_Y188_png, 386, 188, 64); /*MPH*/
GUI_General_Display(MultiPurpose_Sprite, CN_PJchesu_kmh, GUI_BLENDMODE_SRC_OVER);/*km/H*/
}
/*是否有效*/
if (User_App.User_Company == 1)
else
{
if (Speed == TRAPB) /*Trip B*/
{
if (User_ECU.TripB_Average_Speed < 1000 )
{
GUI_General_Digit_Display(User_ECU.TripB_Average_Speed / 10, DIGIT_FIVE_WHITE, 4, 3, LAYER_NUMT_1, GUIBGAVGSpeedPosX, 180, 64);
}
else
{
TFT_LCD_Display_Sprite(LAYER_NUMT_1, SN_Number_05_white_Line_png, 343, 180, 64);
TFT_LCD_Display_Sprite(LAYER_NUMT_2, SN_Number_05_white_Line_png, 363, 180, 64);
TFT_LCD_Clear_Layer(LAYER_NUMT_3);
TFT_LCD_Clear_Layer(LAYER_NUMT_4);
}
GUI_General_Display(MultiPurpose_Sprite, CN_PJchesu_kmh, GUI_BLENDMODE_SRC_OVER); /*MPH*/
}
else
else /*Trip A ODO*/
{
if (User_ECU.TripA_Average_Speed < 1000)
{
GUI_General_Digit_Display(User_ECU.TripA_Average_Speed / 10, DIGIT_FIVE_WHITE, 4, 3, LAYER_NUMT_1, GUIBGAVGSpeedPosX, 180, 64);
}
else
{
TFT_LCD_Display_Sprite(LAYER_NUMT_1, SN_Number_05_white_Line_png, 343, 180, 64);
TFT_LCD_Display_Sprite(LAYER_NUMT_2, SN_Number_05_white_Line_png, 363, 180, 64);
TFT_LCD_Clear_Layer(LAYER_NUMT_3);
TFT_LCD_Clear_Layer(LAYER_NUMT_4);
}
GUI_General_Display(MultiPurpose_Sprite, CN_PJchesu_kmh, GUI_BLENDMODE_SRC_OVER); /*MPH*/
}
}
else
/*单位切换*/
if (1)
{
if (Speed == TRAPB) /*Trip B*/
{
if (User_ECU.TripB_Average_Speed < 1000)
Average_Speed = Common_Data_Get_TripB_Average_Speed();
if (Average_Speed < 1000u )
{
GUI_General_Digit_Display(User_ECU.TripB_Average_Speed / 10, DIGIT_FIVE_WHITE, 4, 3, LAYER_NUMT_1, GUIBGAVGSpeedPosX, 180, 64);
GUI_General_Digit_Display(MultiPurpose_Sprite, (Average_Speed / 10u), Nb_21_0, 4u, 3u, GUIBGAVGSpeedPosX, 305u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Display_Sprite(LAYER_NUMT_1, SN_Number_05_white_Line_png, 343, 180, 64);
TFT_LCD_Display_Sprite(LAYER_NUMT_2, SN_Number_05_white_Line_png, 363, 180, 64);
TFT_LCD_Clear_Layer(LAYER_NUMT_3);
TFT_LCD_Clear_Layer(LAYER_NUMT_4);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 305u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 642u, 305u, GUI_BLENDMODE_CUSTOM);
}
}
else
{
if (User_ECU.TripA_Average_Speed < 1000)
Average_Speed = Common_Data_Get_TripA_Average_Speed();
if (Average_Speed < 1000u )
{
GUI_General_Digit_Display(User_ECU.TripA_Average_Speed / 10, DIGIT_FIVE_WHITE, 4, 3, LAYER_NUMT_1, GUIBGAVGSpeedPosX, 180, 64);
GUI_General_Digit_Display(MultiPurpose_Sprite, (Average_Speed / 10u), Nb_21_0, 4u, 3u, GUIBGAVGSpeedPosX, 305u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Display_Sprite(LAYER_NUMT_1, SN_Number_05_white_Line_png, 343, 180, 64);
TFT_LCD_Display_Sprite(LAYER_NUMT_2, SN_Number_05_white_Line_png, 363, 180, 64);
TFT_LCD_Clear_Layer(LAYER_NUMT_3);
TFT_LCD_Clear_Layer(LAYER_NUMT_4);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 305u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 642u, 305u, GUI_BLENDMODE_CUSTOM);
}
}
}
#endif
else
{
;
}
}
}
/*--------------------------------------------------------------------------
......@@ -913,9 +903,10 @@ void GUI_Drive_Info_Avg_Speed_Display(uint8_t Valid, uint16_t Speed)
* Return : None
* onther : 区域
--------------------------------------------------------------------------*/
void GUI_Drive_Info_Avg_Fuel_Display(uint8_t Valid, uint16_t Fuel)
void GUI_Drive_Info_Avg_Fuel_Display(uint16_t Fuel)
{
uint8_t CanStatus1 = 0u;
uint32_t AVGFuel = 0u;
CanStatus1 = CAN_MSG_Status(ID_CanMsg18EF1718_Msg_Count);
......@@ -925,83 +916,91 @@ void GUI_Drive_Info_Avg_Fuel_Display(uint8_t Valid, uint16_t Fuel)
}
else
{
#if 0
/*单位切换*/
if (User_App.User_Company == 1)
TFT_LCD_Display_Sprite(LAYER_Trip3, SN_D_04_X386_Y152_png, 386, 152, 64); //L/km
if (1)
{
GUI_General_Display(MultiPurpose_Sprite, CN_PJyouhao_L100km, GUI_BLENDMODE_SRC_OVER); /*L/km*/
}
else
{
if (Fuel == TRAPB) //Trip B
TFT_LCD_Display_Sprite(LAYER_Trip3, SN_D_07_X386_Y152_png, 386, 156, 64); //MPG
else //Trip A ODO
TFT_LCD_Display_Sprite(LAYER_Trip3, SN_D_07_X386_Y152_png, 386, 156, 64); //L/m
if (Fuel == TRAPB) /*Trip B*/
{
GUI_General_Display(MultiPurpose_Sprite, CN_PJyouhao_L100km, GUI_BLENDMODE_SRC_OVER); /*MPG*/
}
else /*Trip A ODO*/
{
GUI_General_Display(MultiPurpose_Sprite, CN_PJyouhao_L100km, GUI_BLENDMODE_SRC_OVER); /*L/m*/
}
}
TFT_LCD_Display_Sprite(LAYER_NUMO_5, SN_Number_05_white_Point_png, 354, 140, 64); //top
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_dian, 656u, 285u, GUI_BLENDMODE_CUSTOM); /*top*/
if (User_App.User_Company == 1)
if (1)
{
if (Fuel == TRAPB) //Trip B
if (Fuel == TRAPB) /*Trip B*/
{
if (User_ECU.TripB_Fuel > 1000)
AVGFuel = Common_Data_Get_TripB_Fuel();
if (AVGFuel > 1000u)
{
GUI_General_Digit_Display((1000000 / User_ECU.TripB_Fuel), DIGIT_FIVE_WHITE, 4, 2, LAYER_NUMO_1, GUIBGAVGFuelPosX, 140, 64); //L/100km
GUI_General_Digit_Display(MultiPurpose_Sprite, (1000000u / AVGFuel), Nb_21_0, 4u, 2u, GUIBGAVGFuelPosX, 262u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Clear_Layer(LAYER_NUMO_4);
TFT_LCD_Display_Sprite(LAYER_NUMO_3, SN_Number_05_white_Line_png, 314, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_2, SN_Number_05_white_Line_png, 334, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_1, SN_Number_05_white_Line_png, 363, 140, 64);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 603u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 628u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 262u, GUI_BLENDMODE_CUSTOM);
}
}
else
{
if (User_ECU.TripA_Fuel > 1000)
AVGFuel = Common_Data_Get_TripA_Fuel();
if (AVGFuel > 1000u)
{
GUI_General_Digit_Display((1000000 / User_ECU.TripA_Fuel), DIGIT_FIVE_WHITE, 4, 2, LAYER_NUMO_1, GUIBGAVGFuelPosX, 140, 64); //L/100km
GUI_General_Digit_Display(MultiPurpose_Sprite, (1000000u / AVGFuel), Nb_21_0, 4u, 2u, GUIBGAVGFuelPosX, 262u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Clear_Layer(LAYER_NUMO_4);
TFT_LCD_Display_Sprite(LAYER_NUMO_3, SN_Number_05_white_Line_png, 314, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_2, SN_Number_05_white_Line_png, 334, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_1, SN_Number_05_white_Line_png, 363, 140, 64);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 603u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 628u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 262u, GUI_BLENDMODE_CUSTOM);
}
}
}
else
{
if (Fuel == TRAPB) //Trip B //ϵÊý1.069
if (Fuel == TRAPB) /*Trip B 系数1.069*/
{
if (User_ECU.TripB_Fuel > 1000)
AVGFuel = Common_Data_Get_TripB_Fuel();
if (AVGFuel > 1000u)
{
GUI_General_Digit_Display(((1000000 / User_ECU.TripB_Fuel) * 1069 / 1000), DIGIT_FIVE_WHITE, 4, 2, LAYER_NUMO_1, GUIBGAVGFuelPosX, 140, 64); //MPG
GUI_General_Digit_Display(MultiPurpose_Sprite, ((1000000u / AVGFuel) * 1069u / 1000u), Nb_21_0, 4u, 2u, GUIBGAVGFuelPosX, 262u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Clear_Layer(LAYER_NUMO_4);
TFT_LCD_Display_Sprite(LAYER_NUMO_3, SN_Number_05_white_Line_png, 314, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_2, SN_Number_05_white_Line_png, 334, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_1, SN_Number_05_white_Line_png, 363, 140, 64);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 603u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 628u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 262u, GUI_BLENDMODE_CUSTOM);
}
}
else //Trip A ODO
else /*Trip A ODO */
{
if (User_ECU.TripB_Fuel > 1000)
AVGFuel = Common_Data_Get_TripA_Fuel();
if (AVGFuel > 1000u)
{
GUI_General_Digit_Display((10 / User_ECU.TripA_Fuel), DIGIT_FIVE_WHITE, 4, 2, LAYER_NUMO_1, GUIBGAVGFuelPosX, 140, 64); //L/m
GUI_General_Digit_Display(MultiPurpose_Sprite, (10u / AVGFuel), Nb_21_0, 4u, 2u, GUIBGAVGFuelPosX, 262u, GUI_BLENDMODE_SRC_OVER);
}
else
{
TFT_LCD_Clear_Layer(LAYER_NUMO_4);
TFT_LCD_Display_Sprite(LAYER_NUMO_3, SN_Number_05_white_Line_png, 314, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_2, SN_Number_05_white_Line_png, 334, 140, 64);
TFT_LCD_Display_Sprite(LAYER_NUMO_1, SN_Number_05_white_Line_png, 363, 140, 64);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 603u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 628u, 262u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, Nb_21_hengxian, 667u, 262u, GUI_BLENDMODE_CUSTOM);
}
}
}
#endif
}
}
......@@ -1028,31 +1027,31 @@ void GUI_Battery_Display_Display(uint8_t Mode)
switch (current_value)
{
case 0x0Du:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x0Cu), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x0Cu), 276u, GUI_BLENDMODE_CUSTOM);
case 0x0Cu:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x0Bu), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x0Bu), 276u, GUI_BLENDMODE_CUSTOM);
case 0x0Bu:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x0Au), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x0Au), 276u, GUI_BLENDMODE_CUSTOM);
case 0x0Au:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x09u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x09u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x09u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x08u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x08u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x08u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x07u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x07u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x07u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x06u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x06u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x06u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x05u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x05u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x05u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x04u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_white, (536 + 17u * 0x04u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x04u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x03u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_red, (536 + 17u * 0x03u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x03u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x02u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_red, (536 + 17u * 0x02u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x02u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x01u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_red, (536 + 17u * 0x01u), 276u, GUI_BLENDMODE_CUSTOM);
case 0x01u:
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge1, (536 + 17u * 0x00u), 276u, GUI_BLENDMODE_CUSTOM);
GUI_Translate_Display(MultiPurpose_Sprite, CN_dianyaji_zouge_red, (536 + 17u * 0x00u), 276u, GUI_BLENDMODE_CUSTOM);
break;
default:
GUI_General_Display(MultiPurpose_Sprite, SpriteSize, GUI_BLENDMODE_SRC_OVER);
......
source/Application/Graphic/GUI/GUI.h
View file @ 61479894
......@@ -49,18 +49,20 @@ typedef struct
uint8_t FState_TPMSSET; /*胎压设置*/
uint8_t ENTER_RETURN ;
uint8_t ENTER_RETURN;
uint8_t FState_COilTimeOut;
uint8_t FState_ClearOilRx;
} _Display_State_Flag;
extern volatile _Display_State_Flag State_Flag;
static const uint32_t GUIWedk[7u] = {CN_xingqiyi, CN_xingqier, CN_xingqisan, CN_xingqisi, CN_xingqiwu, CN_xingqiliu, CN_xingqiri};
static const uint32_t GUIGear[12u] = {CN_dangwei_01, CN_dangwei_02, CN_dangwei_03, CN_dangwei_04, CN_dangwei_05, CN_dangwei_06,
CN_dangwei_07, CN_dangwei_08, CN_dangwei_09, CN_dangwei_10, CN_dangwei_11, CN_dangwei_12
};
static const uint32_t GUIMenuWedk[7u] = {CN_Mon, CN_Tue, CN_Wed, CN_Thu, CN_Fri, CN_Sat, CN_ri};
static const uint32_t GUIGear[12u] = {CN_dangwei_1, CN_dangwei_2, CN_dangwei_3, CN_dangwei_4, CN_dangwei_5, CN_dangwei_6, CN_dangwei_7, CN_dangwei_8, CN_dangwei_9, CN_dangwei_10, CN_dangwei_11, CN_dangwei_12};
static const uint16_t GUI_DISP_AC_TEMP[2] = {229u, 216u}; /*室外温度数字显示*/
static const uint16_t GUI_DISP_Hours[2] = {370u, 349u};
......@@ -99,6 +101,9 @@ static const uint16_t GUIUsetSetYPosX[2] = {358u, 337u};
static const uint16_t GUIUsetSetMPosX[2] = {463u, 440u};
static const uint16_t GUIUsetSetDPosX[2] = {570u, 547u};
static const uint16_t GUIBGAVGSpeedPosX[4] = {667u, 642u, 617u, 592u};
static const uint16_t GUIBGAVGFuelPosX[4] = {667u, 628u, 603u, 578u};
extern void GUI_Display_KL15_ON_Init(void);
extern void GUI_Display_KL15_OFF_Init(void);
extern void GUI_Display_Value_Init(void); /*显示数据初始化*/
......@@ -106,93 +111,91 @@ extern void GUI_Display_background(void); /*刷底图*/
extern void GUI_OftenShow_Display(void); /*常显界面*/
extern void GUI_Dynamic_DIsplay(void);
void GUI_AC_Temp_Dispaly(uint8_t Mode); /*室外温度显示*/
void GUI_Time_Dispaly(uint8_t Mode); /*时间显示*/
void GUI_Data_Dispaly(uint8_t Mode); /*日历显示*/
void GUI_TFTTelltales_Display(uint8_t Mode); /*TFT指示灯*/
void GUI_WetGas_Dispaly(uint8_t Mode); /*wet气压*/
void GUI_AdBlue_Dispaly(uint8_t Mode); /**/
void Gui_TRIPA_Display(uint8_t Mode); /*TRIPA*/
void Gui_TRIPB_Display(uint8_t Mode); /*TRIPB*/
void Gui_ODO_Display(uint8_t Mode); /*ODO*/
void Gui_ADAS_Display(uint8_t Mode); /*ADAS*/
void Gui_DrivingSupport_Display(uint8_t Mode); /*定速巡航*/
void Gui_Gear_Display(uint8_t Mode); /*挡位*/
void GUI_AVG_FuelSpeed_Display(uint8_t Mode); /*平均车速，平均油耗*/
void GUI_Drive_Info_Avg_Speed_Display(uint8_t Valid, uint16_t Speed); /*平均车速*/
void GUI_Drive_Info_Avg_Fuel_Display(uint8_t Valid, uint16_t Fuel); /*平均油耗*/
void GUI_Battery_Display_Display(uint8_t Mode); /*电池电量*/
void GUI_DPD_Display_Display(uint8_t Mode); /*DPD*/
void GUI_Time_OilTemp_Display(uint8_t Mode); /*转速时间-油温*/
void GUI_Time_OilTemp_OFF_Display(uint8_t Mode); /*OFF 转速时间-油温*/
void GUI_Year_Month_Data_Display(uint8_t Mode); /*年月日*/
void GUI_block_NULL_Display(uint8_t Mode); /*……*/
void GUI_BG_Menu_Display(uint8_t Mode); /*一级菜单项*/
void GUI_BG_Menu1_Display(uint8_t Mode); /**/
void GUI_BG_Menu2_Display(uint8_t Mode); /**/
void GUI_BG_Menu3_Display(uint8_t Mode); /**/
void GUI_BG_Menu4_Display(uint8_t Mode); /**/
void GUI_BG_Menu5_Display(uint8_t Mode); /**/
void GUI_BG_Menu6_Display(uint8_t Mode); /**/
void GUI_BG_Errot_Display(uint8_t Mode); /*二级菜单--故障码显示*/
void GUI_BG_Rep_Menu_Display(uint8_t Mode); /*二级菜单--保养通知*/
void GUI_BG_RepMenu1_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu2_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu3_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu4_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu5_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu6_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu7_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu8_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu9_Display(uint8_t Mode); /**/
void GUI_BG_RepSet_Menu_Display(uint8_t Mode); /*二级菜单--保养通知设定*/
void GUI_BG_RepSetMenu1_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu2_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu3_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu4_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu5_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu6_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu7_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu8_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Menu_Display(uint8_t Mode); /*二级菜单--用户设定*/
void GUI_BG_UserSetMenu1_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu2_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu3_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu4_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu5_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu6_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu7_Display(uint8_t Mode); /**/
void GUI_BG_Demo_Menu_Display(uint8_t Mode); /*二级菜单--系统演示模式*/
void GUI_BG_DemoMenu1_Display(uint8_t Mode);
void GUI_BG_DemoMenu2_Display(uint8_t Mode);
void GUI_BG_DemoMenu3_Display(uint8_t Mode);
void GUI_BG_DemoMenu4_Display(uint8_t Mode);
void GUI_BG_TPMS_GasPIC_Display(uint8_t Mode); /*二级菜单--TPMS*/
void GUI_BG_TPMS_GasNUM_Display(uint8_t Mode);
void GUI_BG_TPMS_TempPIC_Display(uint8_t Mode);
void GUI_BG_TPMS_TempNUM_Display(uint8_t Mode);
void GUI_BG_RepMenu_Display(uint8_t Mode); /*三级菜单--保养通知*/
void GUI_BG_RepMenu_3_1_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_2_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_3_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_4_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_6_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_7_Display(uint8_t Mode);
void GUI_BG_RepMenu_3_8_Display(uint8_t Mode);
void GUI_BG_RepMenuSet_Menu_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_1_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_2_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_3_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_4_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_5_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_6_Display(uint8_t Mode);
void GUI_BG_RepSetMenu_3_7_Display(uint8_t Mode);
void GUI_BG_UserSet_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Date_Display(uint8_t Mode);
void GUI_BG_UserSet_Time_Display(uint8_t Mode);
void GUI_BG_Enter_Return_Display(uint8_t Mode);
void GUI_AC_Temp_Dispaly(uint8_t Mode); /*室外温度显示*/
void GUI_Time_Dispaly(uint8_t Mode); /*时间显示*/
void GUI_Data_Dispaly(uint8_t Mode); /*日历显示*/
void GUI_TFTTelltales_Display(uint8_t Mode); /*TFT指示灯*/
void GUI_WetGas_Dispaly(uint8_t Mode); /*wet气压*/
void GUI_AdBlue_Dispaly(uint8_t Mode); /**/
void Gui_TRIPA_Display(uint8_t Mode); /*TRIPA*/
void Gui_TRIPB_Display(uint8_t Mode); /*TRIPB*/
void Gui_ODO_Display(uint8_t Mode); /*ODO*/
void Gui_ADAS_Display(uint8_t Mode); /*ADAS*/
void Gui_DrivingSupport_Display(uint8_t Mode); /*定速巡航*/
void Gui_Gear_Display(uint8_t Mode); /*挡位*/
void GUI_AVG_FuelSpeed_Display(uint8_t Mode); /*平均车速，平均油耗*/
void GUI_Drive_Info_Avg_Speed_Display(uint16_t Speed); /*平均车速*/
void GUI_Drive_Info_Avg_Fuel_Display(uint16_t Fuel); /*平均油耗*/
void GUI_Battery_Display_Display(uint8_t Mode); /*电池电量*/
void GUI_DPD_Display_Display(uint8_t Mode); /*DPD*/
void GUI_Time_OilTemp_Display(uint8_t Mode); /*转速时间-油温*/
void GUI_Time_OilTemp_OFF_Display(uint8_t Mode); /*OFF 转速时间-油温*/
void GUI_Year_Month_Data_Display(uint8_t Mode); /*年月日*/
void GUI_block_NULL_Display(uint8_t Mode); /*……*/
void GUI_BG_Menu_Display(uint8_t Mode); /*一级菜单项*/
void GUI_BG_Menu1_Display(uint8_t Mode); /**/
void GUI_BG_Menu2_Display(uint8_t Mode); /**/
void GUI_BG_Menu3_Display(uint8_t Mode); /**/
void GUI_BG_Menu4_Display(uint8_t Mode); /**/
void GUI_BG_Menu5_Display(uint8_t Mode); /**/
void GUI_BG_Menu6_Display(uint8_t Mode); /**/
void GUI_BG_Errot_Display(uint8_t Mode); /*二级菜单--故障码显示*/
void GUI_BG_Rep_Menu_Display(uint8_t Mode); /*二级菜单--保养通知*/
void GUI_BG_RepMenu1_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu2_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu3_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu4_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu5_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu6_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu7_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu8_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu9_Display(uint8_t Mode); /**/
void GUI_BG_RepSet_Menu_Display(uint8_t Mode); /*二级菜单--保养通知设定*/
void GUI_BG_RepSetMenu1_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu2_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu3_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu4_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu5_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu6_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu7_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu8_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Menu_Display(uint8_t Mode); /*二级菜单--用户设定*/
void GUI_BG_UserSetMenu1_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu2_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu3_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu4_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu5_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu6_Display(uint8_t Mode); /**/
void GUI_BG_UserSetMenu7_Display(uint8_t Mode); /**/
void GUI_BG_Demo_Menu_Display(uint8_t Mode); /*二级菜单--系统演示模式*/
void GUI_BG_DemoMenu1_Display(uint8_t Mode); /**/
void GUI_BG_DemoMenu2_Display(uint8_t Mode); /**/
void GUI_BG_DemoMenu3_Display(uint8_t Mode); /**/
void GUI_BG_DemoMenu4_Display(uint8_t Mode); /**/
void GUI_BG_TPMS_GasPIC_Display(uint8_t Mode); /*二级菜单--TPMS*/
void GUI_BG_TPMS_GasNUM_Display(uint8_t Mode); /**/
void GUI_BG_TPMS_TempPIC_Display(uint8_t Mode); /**/
void GUI_BG_TPMS_TempNUM_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_Display(uint8_t Mode); /*三级菜单--保养通知*/
void GUI_BG_RepMenu_3_1_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_2_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_3_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_4_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_6_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_7_Display(uint8_t Mode); /**/
void GUI_BG_RepMenu_3_8_Display(uint8_t Mode); /**/
void GUI_BG_RepMenuSet_Menu_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_1_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_2_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_3_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_4_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_5_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_6_Display(uint8_t Mode); /**/
void GUI_BG_RepSetMenu_3_7_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Date_Display(uint8_t Mode); /**/
void GUI_BG_UserSet_Time_Display(uint8_t Mode); /**/
void GUI_BG_Enter_Return_Display(uint8_t Mode); /**/
#endif
\ No newline at end of file
source/Driver/Graphic/images.c
View file @ 61479894
This source diff could not be displayed because it is too large. You can view the blob instead.
source/Driver/Graphic/images.h
View file @ 61479894
......@@ -124,6 +124,7 @@ enum SpriteName
Nb_21_7,
Nb_21_8,
Nb_21_9,
Nb_21_dian,
Nb_21_hengxian,
Nb_21_maohao,
CN_Nb_28_0,
......@@ -138,25 +139,55 @@ enum SpriteName
CN_Nb_28_9,
CN_Nb_28_dian,
CN_Nb_28_heng,
CN_RC_Nb_12_0,
CN_RC_Nb_12_1,
CN_RC_Nb_12_2,
CN_RC_Nb_12_3,
CN_RC_Nb_12_4,
CN_RC_Nb_12_5,
CN_RC_Nb_12_6,
CN_RC_Nb_12_7,
CN_RC_Nb_12_8,
CN_RC_Nb_12_9,
CN_RC_Nb_12_heng,
CN_RC_Nb_14_0,
CN_RC_Nb_14_1,
CN_RC_Nb_14_2,
CN_RC_Nb_14_3,
CN_RC_Nb_14_4,
CN_RC_Nb_14_5,
CN_RC_Nb_14_6,
CN_RC_Nb_14_7,
CN_RC_Nb_14_8,
CN_RC_Nb_14_9,
CN_RC_Nb_14_dian,
CN_RC_Nb_19_0,
CN_RC_Nb_19_1,
CN_RC_Nb_19_2,
CN_RC_Nb_19_3,
CN_RC_Nb_19_4,
CN_RC_Nb_19_5,
CN_RC_Nb_19_6,
CN_RC_Nb_19_7,
CN_RC_Nb_19_8,
CN_RC_Nb_19_9,
CN_RC_Nb_19_dian,
CN_RC_Nb_21_0,
CN_RC_Nb_21_1,
CN_RC_Nb_21_2,
CN_RC_Nb_21_3,
CN_RC_Nb_21_4,
CN_RC_Nb_21_5,
CN_RC_Nb_21_6,
CN_RC_Nb_21_7,
CN_RC_Nb_21_8,
CN_RC_Nb_21_9,
CN_RC_Nb_21_heng,
CN_RC_Nb_21_maohao,
CN_qiya,
CN_qiyafuhaodeng,
CN_qiyazouge_01,
CN_qiyazouge_02,
CN_qiyazouge_03,
CN_qiyazouge_04,
CN_qiyazouge_05,
CN_qiyazouge_06,
CN_qiyazouge_07,
CN_qiyazouge_08,
CN_qiyazouge_09,
CN_qiyazouge_10,
CN_qiyazouge_11,
CN_qiyazouge_12,
CN_qiyazouge_13,
CN_qiyazouge_14,
CN_qiyazouge_15,
CN_qiyazouge_16,
CN_qiyazouge_17,
CN_tianlanye,
CN_tianlanyefuhaodeng,
CN_tianlanyezouge_01,
......@@ -164,18 +195,18 @@ enum SpriteName
CN_tianlanyezouge_03,
CN_tianlanyezouge_04,
CN_tianlanyezouge_05,
CN_dangwei_01,
CN_dangwei_02,
CN_dangwei_03,
CN_dangwei_04,
CN_dangwei_05,
CN_dangwei_06,
CN_dangwei_07,
CN_dangwei_08,
CN_dangwei_09,
CN_dangwei_1,
CN_dangwei_10,
CN_dangwei_11,
CN_dangwei_12,
CN_dangwei_2,
CN_dangwei_3,
CN_dangwei_4,
CN_dangwei_5,
CN_dangwei_6,
CN_dangwei_7,
CN_dangwei_8,
CN_dangwei_9,
CN_dangwei_buming,
CN_dangwei_DM,
CN_dangwei_E,
......@@ -192,7 +223,6 @@ enum SpriteName
CN_TRIP,
CN_TRIP_A,
CN_TRIP_B,
CN_TRIP_danwei,
CN_Alarm_01_image,
CN_Alarm_01_imageblack,
CN_Alarm_01_wenzi1,
......@@ -363,6 +393,28 @@ enum SpriteName
CN_DPD_zouge3,
CN_DPD_zouge4,
CN_DPD_zouge5,
CN_PJchesu,
CN_PJchesu_kmh,
CN_PJyouhao,
CN_PJyouhao_L100km,
CN_TRIPAB,
CN_TRIPAB_A,
CN_TRIPAB_B,
CN_Bri_an,
CN_Bri_ming,
CN_Bri_zouge,
CN_Alarm_Fault_01_image,
CN_Alarm_Fault_01_wenzi,
CN_Alarm_Fault_02_image,
CN_Alarm_Fault_02_wenzi,
CN_Alarm_Fault_03_image,
CN_Alarm_Fault_03_wenzi,
CN_Alarm_Fault_04_image,
CN_Alarm_Fault_04_wenzi,
CN_Alarm_Fault_05_image,
CN_Alarm_Fault_05_wenzi,
CN_Alarm_Fault_06_image,
CN_Alarm_Fault_06_wenzi,
CN_AM,
CN_Fri,
CN_kuohao,
......@@ -382,19 +434,8 @@ enum SpriteName
CN_dianyaji_kedu,
CN_dianyaji_L,
CN_dianyaji_tubiao,
CN_dianyaji_zouge1,
CN_dianyaji_zouge10,
CN_dianyaji_zouge11,
CN_dianyaji_zouge12,
CN_dianyaji_zouge13,
CN_dianyaji_zouge2,
CN_dianyaji_zouge3,
CN_dianyaji_zouge4,
CN_dianyaji_zouge5,
CN_dianyaji_zouge6,
CN_dianyaji_zouge7,
CN_dianyaji_zouge8,
CN_dianyaji_zouge9,
CN_dianyaji_zouge_red,
CN_dianyaji_zouge_white,
CN_ENTER_danjieshu,
CN_ENTER_Gray,
CN_ENTER_jieshu,
......@@ -427,8 +468,10 @@ enum SpriteName
CN_jiao3,
CN_jiao4,
CN_LeftRoad,
CN_LeftRoad_1,
CN_LeftRoad_shanshuo,
CN_RightRoad,
CN_RightRoad_1,
CN_RightRoad_shanshuo,
CN_Road1,
CN_Road1_shanshuo,
......@@ -436,8 +479,6 @@ enum SpriteName
CN_Road2_shanshuo,
CN_Road3,
CN_Road3_shanshuo,
CN_Road4,
CN_Road4_shanshuo,
CN_tanhao1,
CN_tanhao2,
CN_fengexian,
......@@ -698,6 +739,11 @@ enum SpriteName
CN_User_Menu3_01_22,
CN_User_Menu3_01_23,
CN_User_Menu3_01_24,
CN_User_Menu3_01_25,
CN_User_Menu3_01_26,
CN_User_Menu3_01_27,
CN_User_Menu3_01_28,
CN_User_Menu3_01_29,
CN_User_Menu3_01_3,
CN_User_Menu3_01_4,
CN_User_Menu3_01_5,
......@@ -774,6 +820,7 @@ enum SpriteName
CN_User_Menu3_03_kuang,
CN_User_Menu3_03_man,
CN_User_Menu3_03_nian,
CN_User_Menu3_03_PM,
CN_User_Menu3_03_redge,
CN_User_Menu3_03_ri,
CN_User_Menu3_03_rpm,
......@@ -803,6 +850,8 @@ enum SpriteName
CN_User_Menu3_03_luntai2,
CN_User_Menu3_03_luntai3,
CN_User_Menu3_03_luntai4,
CN_User_Menu3_03_luntai5,
CN_User_Menu3_03_luntai_guang,
CN_User_Menu3_04_che,
CN_User_Menu3_04_jiantou1,
CN_User_Menu3_04_jiantou2,
......
source/System/tasks.c
View file @ 61479894
......@@ -88,6 +88,7 @@
#include "SEG_DISPLAY.h"
#include "Buzzer.h"
#include "CAN_FUNC.h"
/*******************************************************************************
* *
......@@ -220,8 +221,8 @@ void Sys_Run_Mode_100ms_Tasks(void)
Popups_Management_Service();
Popup_Scheduling_Service();
/*CAN 数据处理*/
Drive_Info_IC1_STATUS_Rx();
/*加速度计算*/
Data_Acc_Speed_Processing();
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment