Skip to content

V
VC66_7C
Commit 6453ca2a authored by hu's avatar hu
Browse files
Options

调整TYW清总计里程功能

parent 94732bc3
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 333 additions and 242 deletions
source/Application/APP/GaugesMode/GaugesInterface.c
View file @ 6453ca2a
......@@ -5,7 +5,7 @@
*/
#include "Common_Interface.h"
#define Self_time 900u
#define Self_time 450u
static const uint16_t GaugesDataInInit[GaugesTotal][3][25] =
{
......
source/Application/APP/PowerManagement/PowerManagement.c
View file @ 6453ca2a
......@@ -27,21 +27,21 @@ void Power_Management_Service ( void )
case m_IGN_OFF_Init:
Power_IG_OFF_Init();
g_Power_St = m_IGN_OFF;
//break;
//break;
case m_IGN_OFF:
g_Power_St = Power_Stay_OFF();
break;
case m_IGN_Sleep_Init:
Power_Sleep_Init();
g_Power_St = m_IGN_Sleep;
//break;
//break;
case m_IGN_Sleep:
g_Power_St = Power_Stay_Sleep();
break;
case m_IGN_ON_Init:
Power_IG_ON_Init();
g_Power_St = m_IGN_ON;
//break;
//break;
case m_IGN_ON:
g_Power_St = Power_Stay_ON();
break;
......
source/Application/APP/PowerManagement/PowerManagement_user.c
View file @ 6453ca2a
......@@ -57,6 +57,8 @@
#include "Analog_Signals.h"
#include "BGLInterface.h"
#include "BU98R10.h"
#include "RSCAN.h"
#include "RSCAN_Table.h"
#define POWER_NM_SLEEP 0U
#define POWER_NM_WAKEUP 1U
......@@ -69,7 +71,7 @@ Power_Status_t Power_KL30_Init ( void )
Power_Status_t u8PowerSts;
RTE_RTC_KL30_Init();
CD4051B_KL15Init();
/*电源 指示灯 硬线 通用信息部分 赵建智 维护开始*/
ClearNoInitArea();
Common_DataInit();
Sys_KL30_Init();
......@@ -78,43 +80,30 @@ Power_Status_t Power_KL30_Init ( void )
Telltales_KL30_Init();
SEG_BUFF_Init();
DispSch_TotalInit();
/*电源 指示灯 硬线 通用信息部分 赵建智 维护结束*/
/*车速 转速 水温表头 初始化 田雨 维护开始*/
UserGaugeK30Init();
/*车速 转速 水温表头 初始化 田雨 维护开始*/
/*里程 大小计部分 刘明月 胡志松 辛雨 维护开始*/
Service_OFF_Timing_KL30Init();
Data_User_Mileage_KL30Init();
Data_AvgSpeed_KL30_Init();
Data_Maintenance_Service_KL30_Init();
/*里程 大小计部分 刘明月 胡志松 辛雨 维护结束*/
/*室外温度 胎压部分 档位 清大计 报警 对时 胡迎秋 维护开始*/
Data_AC_Temp_KL30_Init();
Data_TPMS_KL30_Init();
Data_Gear_KL30_Init();
Data_ODO_Clear_KL30Init();
/*室外温度 胎压部分 档位 清大计 报警 对时 胡迎秋 维护结束*/
/*安全带 车门部分 李茂军维护开始*/
SeatbeltInit();
Door_WakeUpInit();
/*安全带 车门部分 李茂军维护结束*/
/*按键部分 杨真东维护开始*/
Key_Init();
LED_Driver_Init();
Sound_Scheduler_Init();
Sound_Player_Init();
RTE_PWM_Init();
/*按键部分 杨真东维护结束*/
/*报警调度初始化*/
Popup_Scheduler_Init();
/*报警调度初始化*/
/*5s不按按键计时清零*/
//LongTimeNoKey_Operation_TimeRest();
......@@ -139,7 +128,7 @@ void Power_Sleep_Init(void)
/*外设*/
Seg_Display_OFF();
UART_Sleep_Init();
Buzzer_Shutdown(); /*蜂鸣器*/
TimerB_PWM_Channel_Sleep(TIMERB_0_CH15);
......@@ -148,6 +137,39 @@ void Power_Sleep_Init(void)
TimerB_PWM_Channel_Sleep(TIMERB_1_CH15);
TimerB_PWM_Channel_Sleep(TIMERB_0_CH7);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_0);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_1);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_2);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_3);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_4);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_5);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_6);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_7);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_8);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_9);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_10);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_11);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_12);
RSCAN0_CH0_Abort(RSCAN_CHANNEL_BUF_13);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_0);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_1);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_2);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_3);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_4);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_5);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_6);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_7);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_8);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_9);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_10);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_11);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_12);
RSCAN0_CH2_Abort(RSCAN_CHANNEL_BUF_13);
RSCAN0_CH0_Sleep_Init();
RSCAN0_CH2_Sleep_Init();
VCC12V0_OUT_EN = 0u; /*12V 电源使能*/
VCC05V0_OUT_EN = 0u; /*外设5V 电源使能*/
D1530_EN_MCU_OUT = 0u; /*1530 使能*/
......@@ -166,7 +188,7 @@ Power_Status_t Power_Wakeup_Init ( void )
Kwp2000_Init();
Power_Status_t u8PowerSts;
/*电源 指示灯 硬线 通用信息部分 赵建智 维护开始*/
Common_DataInit();
Sys_WakeUp_Init();
Line_In_KL30_Init();
......@@ -174,18 +196,18 @@ Power_Status_t Power_Wakeup_Init ( void )
Telltales_KL30_Init();
SEG_BUFF_Init();
DispSch_TotalInit();
/*电源 指示灯 硬线 通用信息部分 赵建智 维护结束*/
Telltales_Wakeup_Init();
Data_Time_WakeUp_Init();
/*车速 转速 水温表头 初始化 田雨 维护开始*/
UserGaugeK30Init();
/*车速 转速 水温表头 初始化 田雨 维护开始*/
Data_User_Mileage_KL15Init();
Maintenance_WakeUp_Init();
/*安全带 车门部分 李茂军维护开始*/
SeatbeltInit();
Door_WakeUpInit();
/*安全带 车门部分 李茂军维护结束*/
RTE_PWM_Init();
/*燃油新增 ----20220503----*/
......
source/Application/APP/SEG_LCD/SEG_DISPLAY.c
View file @ 6453ca2a
......@@ -18,8 +18,6 @@
#define TACHO_SEG_NUM_MAX 27U
#define VEH_SEG_NUM_MAX 30U
static uint8_t GaugesTimer;
static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank, uint8_t *DigitBuf, uint8_t *Reg);
static void Seg_Digit_1_Disp(uint8_t Digit);
static void Seg_Digit_2_Disp(uint8_t Digit);
......@@ -1018,9 +1016,6 @@ static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank
}
}
static uint8_t wbyTestSeg = 0;
static uint16_t wbyTestNum;
static uint8_t IC_TEST = 0;
/******************************************************************************
Seg_Display_Service 在 20MS任务中
信号接口：
......@@ -1029,6 +1024,10 @@ Seg_Display_Service 在 20MS任务中
******************************************************************************/
void Seg_Display_Service(void)
{
static uint16_t Vspeed_Val = 0u;
static uint8_t CurrencyTimer;
static uint8_t TempTimer;
static uint8_t SpeedTimer;
uint32_t Ign_Time;
uint16_t m16_FrameCnt;
......@@ -1054,21 +1053,22 @@ void Seg_Display_Service(void)
Seg_Digit_2_Disp(12);
Seg_Digit_3_Disp(12);
GaugesTimer = 4u;
CurrencyTimer = 0u;
TempTimer = 0u;
SpeedTimer = 0u;
}
else
{
SEG_A25_Disp(7u); /*左侧弧线*/
SEG_C25_Disp(7u); /*右侧弧线*/
if (Ign_Time < StartAnimationEnd)
if (Ign_Time < PopupStart)
{
m16_FrameCnt = Common_GetHMI_StartAnimationFrameCnt();
m16_FrameCnt = m16_FrameCnt / 4u;
if (m16_FrameCnt >= FRAMECNTFLAG)
{
SEG_PRI_Display (GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); /*PRI气压格*/
SEG_SEC_Display (GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); /*SEC气压格*/
SEG_Coolant_Display (GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); /*水温格*/
......@@ -1082,51 +1082,74 @@ void Seg_Display_Service(void)
Seg_Digit_3_Disp(12);
}
GaugesTimer = 4u;
CurrencyTimer = 0u;
TempTimer = 0u;
SpeedTimer = 0u;
}
else if (GaugesTimer == 0u)
else
{
GaugesTimer = 4u;
if (Common_Get_Air1_Valid())
if (CurrencyTimer == 0u)
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
CurrencyTimer = 5u;
if (Common_Get_Air1_Valid())
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
}
else
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_INVALID, 7u); // PRI气压格
}
if (Common_Get_Air2_Valid())
{
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
}
else
{
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_INVALID, 7u); // SEC气压格
}
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //车速格
}
else
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_INVALID, 7u); // PRI气压格
CurrencyTimer--;
}
if (Common_Get_Air2_Valid())
if (TempTimer == 0)
{
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
TempTimer = 2;
if (Coolant_Get_Valid())
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //水温格
}
else
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_INVALID, 7u); //水温格
}
}
else
{
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_INVALID, 7u); // SEC气压格
TempTimer--;
}
if (Coolant_Get_Valid())
if (SpeedTimer == 0)
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //水温格
SpeedTimer = 10;
Vspeed_Val = Common_Get_Disp_V_Speed();
SEG_VehicleSpeed_Num(Vspeed_Val, GUI_DISP_MODE_NORMAL); //车速值
}
else
{
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_INVALID, 7u); //水温格
SpeedTimer --;
}
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(), GUI_DISP_MODE_NORMAL, 7u); //车速格
wbyTestNum = Common_Get_Disp_V_Speed();
SEG_VehicleSpeed_Num(wbyTestNum, GUI_DISP_MODE_NORMAL); //车速值
}
else
{
GaugesTimer--;
}
}
}
......
source/Application/CAN_APP_NM/CAN_App/CAN_FUNC.c
View file @ 6453ca2a
......@@ -176,15 +176,8 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData[])
/*电源电压*/
Power_Supply_Voltage = 0u;
/*驻车制动外发*/
if (Line_In_Get_Status(LINE_IN_PARK_BRAKE) == 0u)
{
Parking_Brake_Switch = 1u;
}
else
{
Parking_Brake_Switch = 0u;
}
/*驻车制动外发*//*18FEAE17 byte8 bit 8-7 要改成，悬空=00 接地=01 20230114*/
Parking_Brake_Switch = Line_In_Get_Status(LINE_IN_PARK_BRAKE);
Rader_Stain_Information = 0u;
SW_ECONO = 0u;
......
source/Application/Graphic/GUI/GUI.c
View file @ 6453ca2a
......@@ -36,6 +36,7 @@
#include "DisplaySch_user.h"
#include "DispSch.h"
#include "FlashCheckSum.h"
#include "Graphic.h"
#pragma alignvar(8)
uint32_t EolNUM[10u][8u];
......@@ -10324,6 +10325,8 @@ void Common_Set_DTCNumTime(uint32_t Vol)
DTCDispNum = Vol;
}
uint8_t Flash_time = 0;
uint16_t Color_Time = 0;// 20 更换一次颜色
void Gui_Display_Test(void)
{
......@@ -10331,8 +10334,7 @@ void Gui_Display_Test(void)
uint16_t Get_Data_Rev_value = 0u ;
uint16_t Get_Data_Veh_valueMax = 0u;
uint16_t Get_Data_Rev_valueMax = 0u;
static uint16_t Time = 0;
static uint16_t Flag = 0;
uint32_t TmpRet = 0;
/*获取的是步数，与当前步数*/
Get_Data_Veh_value = GetGaugesCurrentPos(VehGauges) ;
......@@ -10343,62 +10345,72 @@ void Gui_Display_Test(void)
//if (( Get_Data_Veh_value >= Get_Data_Veh_valueMax ) && ( Get_Data_Rev_value >= Get_Data_Rev_valueMax ))
{
if (CheckSpiFlashCRC() == 0)
while (1)
{
GUI_General_Display(WET_Sprite, quanping_red , GUI_BLENDMODE_SRC_OVER);
}
else
{
while (1)
{
WDT_Clear();
WDT_Clear();
Time++;
if (Time > 500)
{
Time = 0;
if (Flag <= 7)
{
Flag ++;
}
}
if ((Flag == 0) && (Time == 1))
if (Flash_time < 30)
{
Flash_time++;
}
else
{
if (Color_Time >= 0 && Color_Time < 20)
{
loc_Del_Sprite(WET_Sprite, Calendar_Sprite);
loc_free_mem(WET_Sprite, Calendar_Sprite);
//蓝色
Loc_Display_Red(0, 0, 0XFF);
}
else if (Flag == 1)
else if (Color_Time >= 20 && Color_Time < 40)
{
GUI_General_Display(WET_Sprite, quanping_white , GUI_BLENDMODE_SRC_OVER);
//绿色
Loc_Display_Red(0, 0XFF, 0);
}
else if (Flag == 2)
else if (Color_Time >= 40 && Color_Time < 60)
{
GUI_General_Display(WET_Sprite, quanping_blue , GUI_BLENDMODE_SRC_OVER);
//黄色
Loc_Display_Red(0xFF, 0XFF, 0);
}
else if (Flag == 3)
else if (Color_Time >= 60 && Color_Time < 80)
{
GUI_General_Display(WET_Sprite, quanping_red , GUI_BLENDMODE_SRC_OVER);
//红色
Loc_Display_Red(0XFF, 0, 0);
}
else if (Flag == 4)
else if (Color_Time >= 80 && Color_Time < 100)
{
GUI_General_Display(WET_Sprite, quanping_green , GUI_BLENDMODE_SRC_OVER);
//黑色
Loc_Display_Red(0, 0, 0);
}
else if (Flag == 5)
else if (Color_Time >= 100 && Color_Time < 120)
{
GUI_General_Display(WET_Sprite, quanping_black , GUI_BLENDMODE_SRC_OVER);
//白色
Loc_Display_Red(0xFF, 0xFF, 0XFF);
}
else if (Flag == 6)
else if (Flash_time == 30)
{
GUI_General_Display(WET_Sprite, quanping_MSK , GUI_BLENDMODE_SRC_OVER);
Flash_time = 250;
TmpRet = CheckSpiFlashCRC();
if (TmpRet == 0)
{
Loc_Display_Red(0XFF, 0, 0);
}
else
{
//检验正常。恢复显示正常界面
if (Color_Time == 120)
{
Loc_Display_Red(1, 1, 1);
Flash_time = 0;
Color_Time = 0;
break;
}
}
}
else if (Flag == 7)
{
HMI_Clear_KEY_CONFIRM();
GUI_General_Display(WET_Sprite, ditu_2, GUI_BLENDMODE_CUSTOM);
loc_enable_mem(WET_Sprite, Calendar_Sprite);
break;
if (Color_Time < 120)
{
Color_Time++;
}
}
}
......
source/Application/Graphic/UE/DisplaySch_user.c
View file @ 6453ca2a
......@@ -25,7 +25,7 @@ uint8_t BG_display_flag;
uint16_t HMI_StartAnimationFrameCnt;
uint8_t backgroundOFFFlag;
uint32_t BackOdoFlagSta;
uint8_t BackOdoFlagSta;
static void switch_branch(void);
......@@ -183,16 +183,20 @@ void DisplayServices(void)
{
HMI_Clear_KEY_CONFIRM();
}
/*确认超长 5 S*/
/*确认超长 3S*/
else if (UE_CtrlInfo.HMI_KEYInfo.u8KEY_CONFIRM == KEY_EVENT_SUPER_LONG_PRESS)
{
//HMI_Clear_KEY_CONFIRM();
/*TYW总计清零*/
TYW_Data_ODO_Clear();
HMI_Clear_KEY_CONFIRM();
if (BackOdoFlagSta == 0)
{
HMI_Clear_KEY_CONFIRM();
Gui_Display_Test();
/*TYW总计清零*/
//if (Data_ODO_Read() != 0)
BackOdoFlagSta++;
//Gui_Display_Test();
BackOdoFlagSta = 1 ;
TYW_Data_ODO_Clear();
}
}
/*返回短*/
else if (UE_CtrlInfo.HMI_KEYInfo.u8KEY_CANCEL == KEY_EVENT_SHORT_PRESS)
......
source/Application/RTE/Common_Interface.c
View file @ 6453ca2a
......@@ -265,7 +265,35 @@ static void Common_Set_Act_E_Speed(uint16_t Val)
}
static void Common_Set_Disp_V_Speed(uint16_t Val)
{
Disp_V_Speed = Val;
static uint16_t Vspeed_ReflashTime = 0;
static uint16_t Vspeed_Val = 0;
if ((Vspeed_ReflashTime > 0) && (Vspeed_Val != Val))
{
Vspeed_ReflashTime--;
}
if (Vspeed_ReflashTime == 0)
{
if (Vspeed_Val < Val)
{
Vspeed_ReflashTime = 50 / (Val - Vspeed_Val);
Vspeed_Val++;
}
else if (Vspeed_Val > Val)
{
Vspeed_ReflashTime = 50 / (Vspeed_Val - Val);
Vspeed_Val--;
}
else
{
Vspeed_ReflashTime = 500;
}
}
Disp_V_Speed = Vspeed_Val;
}
static void Common_Set_Disp_E_Speed(uint16_t Val)
{
......@@ -341,6 +369,7 @@ void Common_Input_Para(void)
/*车速*/
wbyTest = Speed_Get_Display_Value();
Common_Set_Disp_V_Speed(wbyTest);
Common_Set_Act_V_Speed(Speed_Get_ActualValue());
......
source/Driver/Graphic/Graphic.c
View file @ 6453ca2a
This diff is collapsed.
source/Driver/Graphic/Graphic.h
View file @ 6453ca2a
......@@ -29,13 +29,13 @@
#define GFX_DHD_USE_PC (1U) /* Use performance counters: Set to 1 to reserve memory for performance counters */
#define GFX_DHD_STATE_STORAGE (480U) /* one DHD context with a config with 2 tex units, 3 color unit passes and 4 const colors */
/* CAUTION: you have to adapt this when using dhd_alloc* manually, when using
* DHD performance counter or when using DHD command list feature!
/* CAUTION: you have to adapt this when using dhd_alloc* manually, when using
* DHD performance counter or when using DHD command list feature!
*
* Example: Each of the 4 available performance counters requires allocation of 4 bytes.
Allocation is aligned to 128 bytes, thus for four PC's 512 additional bytes are required.
*/
#define GFX_DHD_RING_SIZE_ALLOC GFX_DHD_ALIGN(GFX_DHD_RING_SIZE + 4U, 128U)
#define GFX_DHD_RING_SIZE_ALLOC GFX_DHD_ALIGN(GFX_DHD_RING_SIZE + 4U, 128U)
#define GFX_DHD_STATE_STORAGE_ALLOC GFX_DHD_ALIGN(GFX_DHD_STATE_STORAGE, 128U)
#define GFX_DHD_PC_ALLOC GFX_DHD_ALIGN(GFX_DHD_USE_PC * 4U * 128U, 128U)
#define GFX_DHD_MEMORY_SIZE (GFX_DHD_RING_SIZE_ALLOC + \
......@@ -114,16 +114,16 @@
#define GFX_DHD_JOB_SIZE (512U) /* Jobsize: Number of bytes in one job buffer */
#define GFX_DHD_JOB_COUNT (8U) /* Jobcount: Recommended number of jobs in flight per client */
#define GFX_DHD_RING_SIZE (1024U) /* Ringsize: Number of bytes in ringbuffer, needs to be a power of two */
#define GFX_DHD_USE_PC (1U) Use performance counters: Set to 1 to reserve memory for performance counters
#define GFX_DHD_USE_PC (1U) Use performance counters: Set to 1 to reserve memory for performance counters
#define GFX_DHD_STATE_STORAGE (480U) /* one DHD context with a config with 2 tex units, 3 color unit passes and 4 const colors */
/* CAUTION: you have to adapt this when using dhd_alloc* manually, when using
* DHD performance counter or when using DHD command list feature!
/* CAUTION: you have to adapt this when using dhd_alloc* manually, when using
* DHD performance counter or when using DHD command list feature!
*
* Example: Each of the 4 available performance counters requires allocation of 4 bytes.
Allocation is aligned to 128 bytes, thus for four PC's 512 additional bytes are required.
*/
#define GFX_DHD_RING_SIZE_ALLOC GFX_DHD_ALIGN(GFX_DHD_RING_SIZE + 4U, 128U)
#define GFX_DHD_RING_SIZE_ALLOC GFX_DHD_ALIGN(GFX_DHD_RING_SIZE + 4U, 128U)
#define GFX_DHD_STATE_STORAGE_ALLOC GFX_DHD_ALIGN(GFX_DHD_STATE_STORAGE, 128U)
#define GFX_DHD_PC_ALLOC GFX_DHD_ALIGN(GFX_DHD_USE_PC * 4U * 128U, 128U)
#define GFX_DHD_MEMORY_SIZE (GFX_DHD_RING_SIZE_ALLOC + \
......@@ -155,19 +155,16 @@ extern void Gfx_Init(uint8_t u8Mode);
extern void Gfx_Sys_Start(void);
extern void Gfx_Sys_Stop(void);
extern void Gfx_Create_Window(r_wm_WinMode_t enMode,
uint32_t u32PosX,
uint32_t u32PosY,
uint32_t u32PosZ,
uint32_t u32Width,
uint32_t u32Height,
uint32_t u32Pitch,
uint32_t u32Bnumber,
r_wm_WinColorFmt_t enColorFmt,
r_wm_Window_t* pstWindow);
uint32_t u32PosX,
uint32_t u32PosY,
uint32_t u32PosZ,
uint32_t u32Width,
uint32_t u32Height,
uint32_t u32Pitch,
uint32_t u32Bnumber,
r_wm_WinColorFmt_t enColorFmt,
r_wm_Window_t* pstWindow);
void Loc_Display_Red(uint8_t ColorR, uint8_t ColorG, uint8_t ColorB);
#endif /* GRAPHIC_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment