Skip to content

V
VC66_7C
Commit 7c419289 authored by hu's avatar hu
Browse files
Options

增加气压表配置功能

parent e6df2277
Show whitespace changes
Inline Side-by-side
Showing with 22331 additions and 22314 deletions
ghs/project
View file @ 7c419289
No preview for this file type
ghs/project.hex
View file @ 7c419289
This source diff could not be displayed because it is too large. You can view the blob instead.
ghs/project.siz
View file @ 7c419289
project .intvect 1536
project .text 297644
project .text 297884
project .rodata 412311
project .secinfo 120
project .syscall 6
......
source/Application/APP/Data_AirPressure/Data_AirPressure.c
View file @ 7c419289
......@@ -4,9 +4,8 @@
#include "CAN_Communication_Matrix.h"
#include "RTE_ADC.h"
//-------------------------------------------
//主负气压 数据处理 wangboyu
//-------------------------------------------
#include "Common_Interface.h"
//断码显示
//-------------------------------------------
//344 - 3.1.2.FRONT/REAR空气计显示
......@@ -256,8 +255,22 @@ void AirPressure_AdcData_Filter(void)
uint16_t PriVoltage = 0 ;
uint16_t SecVoltage = 0 ;
if ((K_Line_Set.K_Line_LID42 == 0x00) || (K_Line_Set.K_Line_LID42 == 0x02))
{
u8PriValid = RTE_Read_PRIMARY_AIR_Valid();
u8SecValid = RTE_Read_SECONDARY_AIR_Valid();
}
else if ((K_Line_Set.K_Line_LID42 == 0x01) || (K_Line_Set.K_Line_LID42 == 0x03))
{
u8PriValid = RTE_Read_SECONDARY_AIR_Valid();
u8SecValid = RTE_Read_PRIMARY_AIR_Valid();
}
else /*配置无效时*/
{
u8PriValid = RTE_Read_PRIMARY_AIR_Valid();
u8SecValid = RTE_Read_SECONDARY_AIR_Valid();
}
if (u8PriValid)
{
if (AirPressureFilter[PRI_ID].SumCnt < 10)
......
source/Application/APP/Data_Fuel/Data_Fuel_User.c
View file @ 7c419289
......@@ -7,7 +7,7 @@
//-------------------------------------------
//燃油 数据处理 wangboyu 2021-8-31 15:19:14
//-------------------------------------------
//342 - 4.2.燃油表
// 342 - 4.2.燃油表
//-------------------------------------------
/*----------------------------------------------------------------------------------------------------------------------
......@@ -24,7 +24,7 @@ step 0 17 27 38 47 55 64 70 76 81 84 88
*-----------------------------------------------------------------------------------------------------------------------*/
static uint8_t Fuel_CurSeg = 0 ;
static uint8_t Fuel_CurSeg = 0;
/*-------------------------------------------------------------------------
* Function Name : Fuel_User_KL30_Init
......@@ -36,8 +36,8 @@ static uint8_t Fuel_CurSeg = 0 ;
--------------------------------------------------------------------------*/
void Fuel_User_KL30_Init(void)
{
FuelStruct FuelInitPara ;
AFC_INIT AFCInit ;
FuelStruct FuelInitPara;
AFC_INIT AFCInit;
uint32_t ODO_Value = 0u;
ODO_Value = Data_ODO_Read();
......@@ -45,21 +45,21 @@ void Fuel_User_KL30_Init(void)
FuelInitPara.FuelShortCircuitR = FUEL_R_MIN_VAL;
FuelInitPara.FuelOpenCircuitR = FUEL_R_MAX_VAL;
FuelInitPara.DisplayZoneBoundary[0] = DISPLAY_BOUNDARY_ES ; //1500
FuelInitPara.DisplayZoneBoundary[1] = DISPLAY_BOUNDARY_1 ; //1500
FuelInitPara.DisplayZoneBoundary[2] = DISPLAY_BOUNDARY_2 ; //1373
FuelInitPara.DisplayZoneBoundary[3] = DISPLAY_BOUNDARY_3 ; //1191
FuelInitPara.DisplayZoneBoundary[4] = DISPLAY_BOUNDARY_4 ; //1009
FuelInitPara.DisplayZoneBoundary[5] = DISPLAY_BOUNDARY_5 ; // 848
FuelInitPara.DisplayZoneBoundary[6] = DISPLAY_BOUNDARY_6 ; // 697
FuelInitPara.DisplayZoneBoundary[7] = DISPLAY_BOUNDARY_7 ; // 545
FuelInitPara.DisplayZoneBoundary[8] = DISPLAY_BOUNDARY_8 ; // 436
FuelInitPara.DisplayZoneBoundary[9] = DISPLAY_BOUNDARY_9 ; // 345
FuelInitPara.DisplayZoneBoundary[10] = DISPLAY_BOUNDARY_10 ; // 254
FuelInitPara.DisplayZoneBoundary[11] = DISPLAY_BOUNDARY_11 ; // 188
FuelInitPara.DisplayZoneBoundary[12] = DISPLAY_BOUNDARY_12 ; // 132
FuelInitPara.DisplayZoneBoundary[13] = DISPLAY_BOUNDARY_13 ; // 40
FuelInitPara.DisplayZoneBoundary[14] = DISPLAY_BOUNDARY_FS ; // 30
FuelInitPara.DisplayZoneBoundary[0] = DISPLAY_BOUNDARY_ES; // 1500
FuelInitPara.DisplayZoneBoundary[1] = DISPLAY_BOUNDARY_1; // 1500
FuelInitPara.DisplayZoneBoundary[2] = DISPLAY_BOUNDARY_2; // 1373
FuelInitPara.DisplayZoneBoundary[3] = DISPLAY_BOUNDARY_3; // 1191
FuelInitPara.DisplayZoneBoundary[4] = DISPLAY_BOUNDARY_4; // 1009
FuelInitPara.DisplayZoneBoundary[5] = DISPLAY_BOUNDARY_5; // 848
FuelInitPara.DisplayZoneBoundary[6] = DISPLAY_BOUNDARY_6; // 697
FuelInitPara.DisplayZoneBoundary[7] = DISPLAY_BOUNDARY_7; // 545
FuelInitPara.DisplayZoneBoundary[8] = DISPLAY_BOUNDARY_8; // 436
FuelInitPara.DisplayZoneBoundary[9] = DISPLAY_BOUNDARY_9; // 345
FuelInitPara.DisplayZoneBoundary[10] = DISPLAY_BOUNDARY_10; // 254
FuelInitPara.DisplayZoneBoundary[11] = DISPLAY_BOUNDARY_11; // 188
FuelInitPara.DisplayZoneBoundary[12] = DISPLAY_BOUNDARY_12; // 132
FuelInitPara.DisplayZoneBoundary[13] = DISPLAY_BOUNDARY_13; // 40
FuelInitPara.DisplayZoneBoundary[14] = DISPLAY_BOUNDARY_FS; // 30
AFCInit.CalcAFCMaxNum = 100; /*50公里或者100公里已更新*/
AFCInit.AFCMin = 30; /*油耗最小值十倍*/
......@@ -82,20 +82,16 @@ void Fuel_User_KL30_Init(void)
}
void Fuel_User_KL15_ON_Init(void)
{
}
void Fuel_User_KL15_OFF_Init(void)
{
}
void Fuel_User_Wakeup_Init(void)
{
}
void Fuel_User_Sleep_Init(void)
{
}
/*-------------------------------------------------------------------------
* Function Name : Fuel_User_KL15_ON_Processing_Service
......@@ -105,40 +101,35 @@ void Fuel_User_Sleep_Init(void)
* Return : None
* onther : 10Ms调用
--------------------------------------------------------------------------*/
static uint16_t wbyTestR = 0 ;
static uint8_t wbyTestStep = 0 ;
static uint8_t Fuel_CyrStep = 0u;
void Fuel_User_KL15_ON_Processing_Service(void)
{
AFC_PARA AFCPara ;
uint8_t FuelR_Valid = 0 ;
uint16_t FuelR = 0 ;
uint8_t Vspeed_Valid = 0 ;
uint16_t Vspeed = 0 ;
uint8_t Espeed_Valid = 0 ;
uint16_t Espeed = 0 ;
uint8_t FuelMode = 0 ;
uint8_t Step = 0 ;
AFC_PARA AFCPara;
uint8_t FuelR_Valid = 0u;
uint8_t Vspeed_Valid = 0u;
uint8_t Espeed_Valid = 0u;
uint8_t FuelMode = 0u;
uint8_t Step = 0u;
uint16_t FuelR = 0u;
uint16_t Vspeed = 0u;
uint16_t Espeed = 0u;
uint16_t FuelResistanceV = 0u;
uint32_t ODO_Value = 0u;
// In ---> Lib
// In ---> Lib
FuelR_Valid = RTE_Read_FUEL_R_Valid();
Vspeed_Valid = Common_Get_Act_V_Speed_Valid();
Espeed_Valid = Common_Get_Act_E_Speed_Valid();
if (Common_Get_IG_Sts_Valid() == COMMON_Valid)
{
if (Common_Get_IG_Sts() == COMMON_POWER_ON)
if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Common_Get_IG_Sts_Valid() == COMMON_Valid))
{
if (FuelR_Valid)
{
FuelR = RTE_Read_FUEL_R();
//FuelR = wbyTestR ;
}
else
{
FuelR = 0 ;
FuelR = 0;
}
if (Vspeed_Valid)
......@@ -147,7 +138,7 @@ void Fuel_User_KL15_ON_Processing_Service(void)
}
else
{
Vspeed = 0 ;
Vspeed = 0;
}
if (Espeed_Valid)
......@@ -156,7 +147,7 @@ void Fuel_User_KL15_ON_Processing_Service(void)
}
else
{
Espeed = 0 ;
Espeed = 0;
}
SetPowerSt(1);
......@@ -165,27 +156,27 @@ void Fuel_User_KL15_ON_Processing_Service(void)
ODO_Value = Data_ODO_Read();
AFCPara.CurODO = ODO_Value * 100; // m
AFCPara.FuleConsume = 0 ;
AFCPara.FuleConsume = 0;
AFCPara.RPM = Espeed; // 1
AFCPara.Speed = (Vspeed * 10);// 0.1
AFCPara.Speed = (Vspeed * 10); // 0.1
SetAFCPara(&AFCPara);
FuelFSM(FuelR);
}
}
SetAFCPara((AFC_PARA *)&AFCPara);
FuelFSM(FuelR); /*新版增加系数*/
FuelResistanceV = GetFuelResistance(); //燃油电阻获取
// Lib ---> Out
FuelMode = GetFuelSensorState(); /*燃油状态获取*/
Step = GetFuelStep();
wbyTestStep = GetFuelStep();
if (FuelMode == FuelSensorNormal)
{
Fuel_CurSeg = Step ;
Fuel_CurSeg = (uint16_t)GetFuelSeg(); /*段*/
Fuel_CyrStep = (uint16_t)GetFuelStep(); /*步*/
}
else
{
Fuel_CurSeg = 0 ;
Fuel_CurSeg = 0u;
Fuel_CyrStep = 0u;
}
}
}
/*-------------------------------------------------------------------------
......@@ -199,8 +190,8 @@ void Fuel_User_KL15_ON_Processing_Service(void)
void Fuel_User_KL15_OFF_Processing_Service(void)
{
uint8_t i;
uint8_t FuelR_Valid = 0 ;
uint16_t FuelR = 0 ;
uint8_t FuelR_Valid = 0;
uint16_t FuelR = 0;
FuelR_Valid = RTE_Read_FUEL_R_Valid();
FuelR = RTE_Read_FUEL_R();
......@@ -217,8 +208,6 @@ void Fuel_User_KL15_OFF_Processing_Service(void)
FuelFSM(FuelR);
}
}
}
/*-------------------------------------------------------------------------
......@@ -231,7 +220,7 @@ void Fuel_User_KL15_OFF_Processing_Service(void)
--------------------------------------------------------------------------*/
uint8_t Fuel_Get_CurSeg(void)
{
return Fuel_CurSeg ;
return Fuel_CurSeg;
}
/*-------------------------------------------------------------------------
* Function Name : Fuel_Get_Percent
......@@ -243,27 +232,26 @@ uint8_t Fuel_Get_CurSeg(void)
--------------------------------------------------------------------------*/
uint8_t Fuel_Get_Percent(void)
{
uint16_t Percent = 0 ;
uint8_t Step = 0 ;
uint16_t Percent = 0;
uint8_t Step = 0;
Step = GetFuelStep();
if (Step <= 10)
{
Percent = 0 ;
Percent = 0;
}
else if (Step >= 90)
{
Percent = 100 ;
Percent = 100;
}
else
{
Step -= 10 ;
Percent = Step ;
Percent *= 100 ; //放大100倍
Percent /= 80 ; // 90 - 10
Step -= 10;
Percent = Step;
Percent *= 100; //放大100倍
Percent /= 80; // 90 - 10
}
return Percent ;
return Percent;
}
uint16_t Fuel_Get_Res(void)
......@@ -277,11 +265,11 @@ uint16_t Fuel_Get_Step(void)
uint8_t Fuel_Get_LowAlarm(void)
{
uint8_t u8Result = 0 ;
uint8_t FuelMode = 0 ;
uint8_t Step = 0 ;
uint8_t FuelR_Valid = 0 ;
uint16_t FuelR = 0 ;
uint8_t u8Result = 0;
uint8_t FuelMode = 0;
uint8_t Step = 0;
uint8_t FuelR_Valid = 0;
uint16_t FuelR = 0;
FuelR_Valid = RTE_Read_FUEL_R_Valid();
FuelMode = GetFuelSensorState();
......@@ -294,29 +282,26 @@ uint8_t Fuel_Get_LowAlarm(void)
if (FuelMode == FuelSensorNormal)
{
if (FuelR > 30 && FuelR < 3000 )
if (FuelR > 30 && FuelR < 3000)
{
if (Step < 20)
{
u8Result = 1 ;
u8Result = 1;
}
else
{
u8Result = 0 ;
u8Result = 0;
}
}
else
{
u8Result = 0 ;
u8Result = 0;
}
}
else
{
u8Result = 0 ;
u8Result = 0;
}
return u8Result ;
return u8Result;
}
source/Application/APP/GaugesMode/GaugesInterface.c
View file @ 7c419289
#include "GaugesInterface.h"
#include "Menu.h"
/**@struct _GaugesInfoInit
*this is _GaugesInfoInit
*/
*this is _GaugesInfoInit
*/
#include "Common_Interface.h"
static const uint16_t GaugesDataInInit[GaugesTotal][3][25] =
{
/*车速*/
{ {0, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2250, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{
{0, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2250, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2250, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 5 , 9 , 13 , 17 , 21 , 25 , 30 , 35 , 40 , 45 , 50 , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
{0, 5, 9, 13, 17, 21, 25, 30, 35, 40, 45, 50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
},
/*转速*/
{ {0u, 1000, 1500, 2000, 2500, 3000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0u, 1000, 1500, 2000, 2500, 3000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0u, 6 , 11 , 16 , 21 , 27 , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
{0u, 6, 11, 16, 21, 27, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
},
/*水温*/
{ { 0 , 50, 55, 61, 66, 72, 77, 102, 104, 106, 108, 110, 111, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{49 , 54, 60, 65, 71, 76, 101, 103, 105, 107, 109, 110, 210, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0 , 1, 2, 3, 4, 5, 6, 7, 8 , 9, 10 , 11 , 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
{ { 0, 50, 55, 61, 66, 72, 77, 102, 104, 106, 108, 110, 111, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{49, 54, 60, 65, 71, 76, 101, 103, 105, 107, 109, 110, 210, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
},
/*PRI气压*/
{ {0 , 500, 720, 940, 1160, 1380, 1600, 1820, 2040, 2260, 2480, 2700, 2920, 3140, 3360, 3580 , 3800 , 4020, 4240, 4500, 0, 0, 0, 0, 0},
{0 , 610, 830, 1050, 1270, 1490, 1710, 1930, 2150, 2370, 2590, 2810, 3030, 3250, 3470, 3690 , 3910 , 4130, 4350, 4500, 0, 0, 0, 0, 0},
{0 , 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 0, 0, 0, 0, 0}
{ {500, 720, 940, 1160, 1380, 1600, 1820, 2040, 2260, 2480, 2700, 2920, 3140, 3360, 3580, 3800, 4020, 4240, 4500, 0, 0, 0, 0, 0},
{610, 830, 1050, 1270, 1490, 1710, 1930, 2150, 2370, 2590, 2810, 3030, 3250, 3470, 3690, 3910, 4130, 4350, 4500, 0, 0, 0, 0, 0},
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0}
},
/*SEC气压*/
{ {0 , 500, 720, 940, 1160, 1380, 1600, 1820, 2040, 2260, 2480, 2700, 2920, 3140, 3360, 3580 , 3800 , 4020, 4240, 4500, 0, 0, 0, 0, 0},
{0 , 610, 830, 1050, 1270, 1490, 1710, 1930, 2150, 2370, 2590, 2810, 3030, 3250, 3470, 3690 , 3910 , 4130, 4350, 4500, 0, 0, 0, 0, 0},
{0 , 0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18, 0, 0, 0, 0, 0}
{ {500, 720, 940, 1160, 1380, 1600, 1820, 2040, 2260, 2480, 2700, 2920, 3140, 3360, 3580, 3800, 4020, 4240, 4500, 0, 0, 0, 0, 0},
{610, 830, 1050, 1270, 1490, 1710, 1930, 2150, 2370, 2590, 2810, 3030, 3250, 3470, 3690, 3910, 4130, 4350, 4500, 0, 0, 0, 0, 0},
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0}
},
/*WET气压*/
{ {500, 730, 960, 1190, 1420, 1650, 1880, 2100, 2330, 2560, 2790, 3020, 3250, 3480, 3710 , 3940 , 4170, 4400, 4500, 0, 0, 0, 0, 0, 0},
{600, 830, 1060, 1290, 1520, 1750, 1980, 2200, 2430, 2660, 2890, 3120, 3350, 3580, 3810 , 4040 , 4270, 4500, 4500, 0, 0, 0, 0, 0, 0},
{0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18, 0, 0, 0, 0, 0, 0}
{ {500, 730, 960, 1190, 1420, 1650, 1880, 2100, 2330, 2560, 2790, 3020, 3250, 3480, 3710, 3940, 4170, 4400, 4500, 0, 0, 0, 0, 0, 0},
{600, 830, 1060, 1290, 1520, 1750, 1980, 2200, 2430, 2660, 2890, 3120, 3350, 3580, 3810, 4040, 4270, 4500, 4500, 0, 0, 0, 0, 0, 0},
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0, 0}
},
/*电池电压*/
{ {0 , 17000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000, 30500, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0 , 17000, 18500, 19500, 20500, 21500, 22500, 23500, 24500, 25500, 26500, 27500, 28500, 29500, 30000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
{ {0, 17000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000, 30500, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 17000, 18500, 19500, 20500, 21500, 22500, 23500, 24500, 25500, 26500, 27500, 28500, 29500, 30000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
},
};
/*指示类型*/ /*表头1 表头2 表头3 表头4*/ /*表头5*/ /*表头6*/ /*表头7*/
static const uint8_t GaugesIndicatType[GaugesTotal] = {LEDOtherType, LEDOtherType, LEDTempType, LEDGasType, LEDGasType, LEDGasType,LEDOtherType}; /*初始化表头显示类型，例如水温，气压*/
static const uint8_t GaugesIndicatType[GaugesTotal] = {LEDOtherType, LEDOtherType, LEDTempType, LEDGasType, LEDGasType, LEDGasType, LEDOtherType}; /*初始化表头显示类型，例如水温，气压*/
/*每个表头包含的参数个数*/ /*表头1 表头2 表头3 表头4*/
static const uint8_t GaugesParaNum[GaugesTotal] = {12, 6, 13, 19, 19, 19 , 14};
static const uint8_t GaugesParaNum[GaugesTotal] = {12, 6, 13, 19, 19, 19, 15};
/*每个表头IGON后开始走动时间*/ /*表头1 表头2 表头3 表头4 表头5 表头6*/
static const uint16_t GaugesStarMoveTime[GaugesTotal] = {0, 0, 0, 0, 0, 0, 0,};/*0是上电就开始走动，其他参数是ms*/
static const uint16_t GaugesStarMoveTime[GaugesTotal] =
{
0,
0,
0,
0,
0,
0,
0,
}; /*0是上电就开始走动，其他参数是ms*/
/*每个表头IGON后是否自检*/ /*表头1 表头2 表头3 表头4 表头5 表头6*/
static const uint16_t GaugesTest[GaugesTotal] = {1, 1, 1, 1, 1, 0, 0,};/*1是自检，0不自检*/
static const uint16_t GaugesTest[GaugesTotal] =
{
1,
1,
1,
1,
1,
0,
0,
}; /*1是自检，0不自检*/
/*每个表头自检走动每格时间*/
const uint16_t SeftTest_Gauges_Times[GaugesTotal] = {1500 / (30 + 1), 1500 / (27 + 1) , 1500 / (12 + 1), 1500 / (18 + 1), 1500 / (18 + 1), 0, 0};
const uint16_t SeftTest_Gauges_Times[GaugesTotal] = {1500 / (30 + 1), 1500 / (27 + 1), 1500 / (12 + 1), 1500 / (18 + 1), 1500 / (18 + 1), 0, 0};
uint16_t RealDataIn[GaugesTotal];
_GaugesInfoInit GaugesInfo_Init_Table[GaugesTotal];
/**@brief User Gauge K30 Init function
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
void UserGaugeK30Init(void)
{
uint8_t i = 0u;
uint8_t j = 0u;
for (i = 0u; i < GaugesTotal; i++)
{
GaugesInfo_Init_Table[i] .SectorNum = GaugesParaNum[i];
GaugesInfo_Init_Table[i] .GaugesType = GaugesIndicatType[i];
GaugesInfo_Init_Table[i] .GaugesDataIn = &RealDataIn[i];
GaugesInfo_Init_Table[i] .GaugesStartTime = GaugesStarMoveTime[i];
GaugesInfo_Init_Table[i] .GaugesTestFlag = GaugesTest[i];
GaugesInfo_Init_Table[i].SectorNum = GaugesParaNum[i];
GaugesInfo_Init_Table[i].GaugesType = GaugesIndicatType[i];
GaugesInfo_Init_Table[i].GaugesDataIn = &RealDataIn[i];
GaugesInfo_Init_Table[i].GaugesStartTime = GaugesStarMoveTime[i];
GaugesInfo_Init_Table[i].GaugesTestFlag = GaugesTest[i];
for (j = 0u; j < GaugesParaNum[i]; j++)
{
GaugesInfo_Init_Table[i] .ReferenceDataInUp[j] = GaugesDataInInit[i][0][j];
GaugesInfo_Init_Table[i] .ReferenceDataInDown[j] = GaugesDataInInit[i][1][j];
GaugesInfo_Init_Table[i] .ReferenceDataInOut[j] = GaugesDataInInit[i][2][j];
GaugesInfo_Init_Table[i].ReferenceDataInUp[j] = GaugesDataInInit[i][0][j];
GaugesInfo_Init_Table[i].ReferenceDataInDown[j] = GaugesDataInInit[i][1][j];
GaugesInfo_Init_Table[i].ReferenceDataInOut[j] = GaugesDataInInit[i][2][j];
}
}
GaugesK15Init_OFF();
}
/**@brief User Gauge K15 Init function
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
void UserGaugeK15Init(void)
{
uint8_t i = 0u;
uint8_t j = 0u;
for (i = 0u; i < GaugesTotal; i++)
{
GaugesInfo_Init_Table[i] .SectorNum = GaugesParaNum[i];
GaugesInfo_Init_Table[i] .GaugesType = GaugesIndicatType[i];
GaugesInfo_Init_Table[i] .GaugesDataIn = &RealDataIn[i];
GaugesInfo_Init_Table[i] .GaugesStartTime = GaugesStarMoveTime[i];
GaugesInfo_Init_Table[i] .GaugesTestFlag = GaugesTest[i];
GaugesInfo_Init_Table[i].SectorNum = GaugesParaNum[i];
GaugesInfo_Init_Table[i].GaugesType = GaugesIndicatType[i];
GaugesInfo_Init_Table[i].GaugesDataIn = &RealDataIn[i];
GaugesInfo_Init_Table[i].GaugesStartTime = GaugesStarMoveTime[i];
GaugesInfo_Init_Table[i].GaugesTestFlag = GaugesTest[i];
for (j = 0u; j < GaugesParaNum[i]; j++)
{
GaugesInfo_Init_Table[i] .ReferenceDataInUp[j] = GaugesDataInInit[i][0][j];
GaugesInfo_Init_Table[i] .ReferenceDataInDown[j] = GaugesDataInInit[i][1][j];
GaugesInfo_Init_Table[i] .ReferenceDataInOut[j] = GaugesDataInInit[i][2][j];
GaugesInfo_Init_Table[i].ReferenceDataInUp[j] = GaugesDataInInit[i][0][j];
GaugesInfo_Init_Table[i].ReferenceDataInDown[j] = GaugesDataInInit[i][1][j];
GaugesInfo_Init_Table[i].ReferenceDataInOut[j] = GaugesDataInInit[i][2][j];
}
}
GaugesK15Init_ON();
}
/**@brief Gauge Schedule function
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugeNum Gauge Postion
* @param[in] GParam Gauge Struct
* @since 1.0.0.0
*/
void UserGaugeSchedule(void)
{
uint8_t i = 0u;
......@@ -129,78 +146,73 @@ void UserGaugeSchedule(void)
for (i = 0u; i < GaugesTotal; i++)
{
GaugeSchedule(i, &GaugesInfo_Init_Table[i]);
}
}
/**@brief Set Gauges Paragram function
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
void SetGaugesPara(uint8_t GaugesID, uint16_t GaugesVal)
{
RealDataIn[GaugesID] = GaugesVal;
}
/**@brief Get Gauges Max Out Val function
* @author TYW
* @param[in] GaugesID Gauge Name
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugesID Gauge Name
* @since 1.0.0.0
*/
uint16_t GetGaugesMaxOutVal(uint8_t GaugesID)
{
return GaugesInfo_Init_Table[GaugesID] .ReferenceDataInOut[GaugesParaNum[GaugesID] - 1u] ;
return GaugesInfo_Init_Table[GaugesID].ReferenceDataInOut[GaugesParaNum[GaugesID] - 1u];
}
/**@brief Set Gauges Up Val function
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
void SetGaugesUpVal(uint8_t GaugesID, uint16_t GaugesUpVal[])
{
uint8_t i;
for (i = 0u; i < GaugesParaNum[GaugesID]; i++)
{
GaugesInfo_Init_Table[GaugesID] .ReferenceDataInUp[i] = GaugesUpVal[i];
GaugesInfo_Init_Table[GaugesID].ReferenceDataInUp[i] = GaugesUpVal[i];
}
}
/**@brief Set Gauges Dwom Val function
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
void SetGaugesDownVal(uint8_t GaugesID, uint16_t GaugesDownVal[])
{
uint8_t i;
for (i = 0u; i < GaugesParaNum[GaugesID]; i++)
{
GaugesInfo_Init_Table[GaugesID] .ReferenceDataInDown[i] = GaugesDownVal[i];
GaugesInfo_Init_Table[GaugesID].ReferenceDataInDown[i] = GaugesDownVal[i];
}
}
/**@brief Set Gauges Out Val function
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
* @author TYW
* @param[in] GaugesID Gauge Name
* @param[in] GaugesVal Gauges Val
* @since 1.0.0.0
*/
void SetGaugesOutVal(uint8_t GaugesID, uint16_t GaugesOutVal[])
{
uint8_t i;
for (i = 0u; i < GaugesParaNum[GaugesID]; i++)
{
GaugesInfo_Init_Table[GaugesID] .ReferenceDataInOut[i] = GaugesOutVal[i];
GaugesInfo_Init_Table[GaugesID].ReferenceDataInOut[i] = GaugesOutVal[i];
}
}
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment