Skip to content

V
VC66_7C
Commit 8e698101 authored by hu's avatar hu
Browse files
Options

调整气压server逻辑，调整大G最大值，增加小G个数-20个，调整EEP块分配

parent 352472da
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 22434 additions and 22471 deletions
ghs/project
View file @ 8e698101
No preview for this file type
ghs/project.hex
View file @ 8e698101
This diff is collapsed.
ghs/project.siz
View file @ 8e698101
project .intvect 1536 project .intvect 1536
project .text 317516 project .text 317660
project .rodata 411087 project .rodata 411071
project .secinfo 120 project .secinfo 120
project .syscall 6 project .syscall 6
project .romdata 9029 project .romdata 9029
......
source/Application/APP/Data_AirPressure/Data_AirPressure.h
View file @ 8e698101
#ifndef DATA_AIRPRESSURE_H #ifndef DATA_AIRPRESSURE_H
#define DATA_AIRPRESSURE_H #define DATA_AIRPRESSURE_H
#include "GaugesInterface.h"
#include "TYW_stdint.h" #include "TYW_stdint.h"
extern DataStruct DataStrGas1;
extern DataStruct DataStrGas2;
extern DataStruct DataStrWET;
extern void AirPressure_KL30_Init(void); extern void AirPressure_KL30_Init(void);
extern void AirPressure_KL15_ON_Init(void); extern void AirPressure_KL15_ON_Init(void);
...@@ -13,12 +15,11 @@ extern void AirPressure_Wakeup_Init(void); ...@@ -13,12 +15,11 @@ extern void AirPressure_Wakeup_Init(void);
extern void AirPressure_Sleep_Init(void); extern void AirPressure_Sleep_Init(void);
extern void AirPressure_Processing_Service(void); extern void AirPressure_Processing_Service(void);
void Data_Gas1_Processing_Service(void);
void Data_Gas2_Processing_Service(void);
void Data_WET_Processing_Service(void);
uint8_t Common_Get_Air1_Valid(void);
uint8_t Common_Get_Air2_Valid(void);
uint8_t Common_Get_WET_Valid(void);
extern uint16_t AirPressure_Get_kPa(uint8_t ID); #endif
extern uint8_t AirPressure_Get_Valid(uint8_t ID); \ No newline at end of file
extern void AirPressure_AdcData_Filter(void) ;
extern uint8_t AirPressure_Get_CurSeg(uint8_t ID);
#endif
source/Application/APP/Data_ODO/Services_ODO_user.c
View file @ 8e698101
...@@ -41,7 +41,7 @@ void Data_User_Mileage_KL30Init(void) ...@@ -41,7 +41,7 @@ void Data_User_Mileage_KL30Init(void)
Func.Get_Sys_IG_Sts = Common_Get_IG_Sts; Func.Get_Sys_IG_Sts = Common_Get_IG_Sts;
Func.Get_Act_V_Speed_Valid = Common_Get_Act_V_Speed_Valid; Func.Get_Act_V_Speed_Valid = Common_Get_Act_V_Speed_Valid;
Func.Get_Act_V_Speed = Common_Get_Act_V_Speed; Func.Get_Act_V_Speed = Common_Get_Act_V_Speed;
Func.Get_TireSize = 1; Func.Get_TireSize = ( void * )0;
Func.EEPromWrite_Cbk = Data_User_EEPROM_Write; //暂时未设置 Func.EEPromWrite_Cbk = Data_User_EEPROM_Write; //暂时未设置
Data_Mileage_KL30_Init(DataMilleageBuf, &MileInit, &Func); Data_Mileage_KL30_Init(DataMilleageBuf, &MileInit, &Func);
...@@ -52,20 +52,20 @@ void Data_User_Mileage_KL30Init(void) ...@@ -52,20 +52,20 @@ void Data_User_Mileage_KL30Init(void)
Data_User_EEPROM_Read(EEPROM_BLOCK_TRIP_STAMP, TempBuf + 3, 4); Data_User_EEPROM_Read(EEPROM_BLOCK_TRIP_STAMP, TempBuf + 3, 4);
TripInit[EM_TRIP_A].Stamp = TempBuf[3]; TripInit[EM_TRIP_A].Stamp = TempBuf[3];
TripInit[EM_TRIP_A].MaxValue = 99999; TripInit[EM_TRIP_A].MaxValue = 9999999u;
TripInit[EM_TRIP_A].IsRestart = 1u; TripInit[EM_TRIP_A].IsRestart = 1u;
TripInit[EM_TRIP_B].Stamp = TempBuf[4]; TripInit[EM_TRIP_B].Stamp = TempBuf[4];
TripInit[EM_TRIP_B].MaxValue = 99999; TripInit[EM_TRIP_B].MaxValue = 9999999u;
TripInit[EM_TRIP_B].IsRestart = 1u; TripInit[EM_TRIP_B].IsRestart = 1u;
TripInit[EM_TRIP_C].Stamp = TempBuf[5]; TripInit[EM_TRIP_C].Stamp = TempBuf[5];
TripInit[EM_TRIP_C].MaxValue = 99999; TripInit[EM_TRIP_C].MaxValue = 99999;
TripInit[EM_TRIP_C].IsRestart = 0u; TripInit[EM_TRIP_C].IsRestart = 1u;
TripInit[EM_TRIP_D].Stamp = TempBuf[6]; TripInit[EM_TRIP_D].Stamp = TempBuf[6];
TripInit[EM_TRIP_D].MaxValue = 99999; TripInit[EM_TRIP_D].MaxValue = 99999;
TripInit[EM_TRIP_D].IsRestart = 0u; TripInit[EM_TRIP_D].IsRestart = 1u;
Data_Trip_KL30_Init(DataTripBuf, TripInit, EM_TRIP_MAX, Func.EEPromWrite_Cbk); Data_Trip_KL30_Init(DataTripBuf, TripInit, EM_TRIP_MAX, Func.EEPromWrite_Cbk);
} }
...@@ -77,7 +77,7 @@ void Data_User_Mileage_KL15Init(void) ...@@ -77,7 +77,7 @@ void Data_User_Mileage_KL15Init(void)
Func.Get_Sys_IG_Sts = Common_Get_IG_Sts; Func.Get_Sys_IG_Sts = Common_Get_IG_Sts;
Func.Get_Act_V_Speed_Valid = Common_Get_Act_V_Speed_Valid; Func.Get_Act_V_Speed_Valid = Common_Get_Act_V_Speed_Valid;
Func.Get_Act_V_Speed = Common_Get_Act_V_Speed; Func.Get_Act_V_Speed = Common_Get_Act_V_Speed;
Func.Get_TireSize = 1; Func.Get_TireSize = ( void * )0;
Func.EEPromWrite_Cbk = Data_User_EEPROM_Write; //暂时未设置 Func.EEPromWrite_Cbk = Data_User_EEPROM_Write; //暂时未设置
Data_Mileage_Wakeup_Init(DataMilleageBuf, &Func); Data_Mileage_Wakeup_Init(DataMilleageBuf, &Func);
......
source/Application/APP/Data_Voltmeter/Data_Voltmeter.c
View file @ 8e698101
...@@ -115,7 +115,8 @@ static void Data_Voltmeter_2_Gui(void) ...@@ -115,7 +115,8 @@ static void Data_Voltmeter_2_Gui(void)
VoltmeterVariable.AvrVoltage = Get_VoltFilter(); VoltmeterVariable.AvrVoltage = Get_VoltFilter();
VoltmeterVariable.AvrVoltage += 800u;/*增加二极管压降补偿*/ VoltmeterVariable.AvrVoltage += 800u;/*增加二极管压降补偿*/
if ((VoltmeterVariable.AvrVoltage >= 17000) && (VoltmeterVariable.AvrVoltage <= 30500))
if ((VoltmeterVariable.AvrVoltage >= 17000u) && (VoltmeterVariable.AvrVoltage <= 30500u))
{ {
VoltmeterVariable.Valid = 1 ; VoltmeterVariable.Valid = 1 ;
VoltmeterVariable.Timer = 0 ; VoltmeterVariable.Timer = 0 ;
...@@ -136,6 +137,7 @@ static void Data_Voltmeter_2_Gui(void) ...@@ -136,6 +137,7 @@ static void Data_Voltmeter_2_Gui(void)
if (VoltmeterVariable.Valid) if (VoltmeterVariable.Valid)
{ {
VoltmeterVariable.AvrVoltage /= 10u;
SetGaugesPara(VoltGauges, VoltmeterVariable.AvrVoltage); SetGaugesPara(VoltGauges, VoltmeterVariable.AvrVoltage);
u8GuiMode = GetGaugesCurrentPos(VoltGauges); u8GuiMode = GetGaugesCurrentPos(VoltGauges);
} }
......
source/Application/APP/GaugesMode/Gauges.c
View file @ 8e698101
...@@ -434,15 +434,8 @@ void GaugeMoveing(uint8_t GaugesNum) ...@@ -434,15 +434,8 @@ void GaugeMoveing(uint8_t GaugesNum)
} }
} }
} }
/*电压放大倍数不同，单独处理*/
if (GaugesNum == VoltGauges) MoveTypePara = 10u;
{
MoveTypePara = 100u;
}
else
{
MoveTypePara = 10u;
}
} }
else else
{ {
......
source/Application/APP/GaugesMode/GaugesInterface.c
View file @ 8e698101
...@@ -41,9 +41,9 @@ static const uint16_t GaugesDataInInit[GaugesTotal][3][25] = ...@@ -41,9 +41,9 @@ static const uint16_t GaugesDataInInit[GaugesTotal][3][25] =
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0, 0} { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 0, 0, 0, 0, 0, 0}
}, },
/*电池电压*/ /*电池电压*/
{ {0, 17000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, 26000, 27000, 28000, 29000, 30000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, { {0, 1700, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 18500, 19500, 20500, 21500, 22500, 23500, 24500, 25500, 26500, 27500, 28500, 29500, 30500, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 1850, 1950, 2050, 2150, 2250, 2350, 2450, 2550, 2650, 2750, 2850, 2950, 3050, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
}, },
}; };
......
source/Application/APP/GaugesMode/GaugesInterface.h
View file @ 8e698101
...@@ -29,11 +29,6 @@ typedef struct ...@@ -29,11 +29,6 @@ typedef struct
uint8_t Status; uint8_t Status;
} DataStruct; } DataStruct;
extern DataStruct DataStrGas1;
extern DataStruct DataStrGas2;
extern DataStruct DataStrVoltage;
extern uint16_t RealDataIn[GaugesTotal]; extern uint16_t RealDataIn[GaugesTotal];
extern void SetGaugesPara(uint8_t GaugesID, uint16_t GaugesVal); /* 传递表头参数 */ extern void SetGaugesPara(uint8_t GaugesID, uint16_t GaugesVal); /* 传递表头参数 */
extern void UserGaugeSchedule(void);/*在主循环中调用*/ extern void UserGaugeSchedule(void);/*在主循环中调用*/
......
source/Application/APP/PowerManagement/PowerManagement_user.c
View file @ 8e698101
...@@ -104,7 +104,6 @@ Power_Status_t Power_KL30_Init ( void ) ...@@ -104,7 +104,6 @@ Power_Status_t Power_KL30_Init ( void )
RTE_PWM_Init(); RTE_PWM_Init();
/*按键部分 杨真东维护结束*/ /*按键部分 杨真东维护结束*/
AirPressure_KL30_Init();
/*报警调度初始化*/ /*报警调度初始化*/
Popup_Scheduler_Init(); Popup_Scheduler_Init();
/*报警调度初始化*/ /*报警调度初始化*/
...@@ -171,7 +170,7 @@ Power_Status_t Power_Wakeup_Init ( void ) ...@@ -171,7 +170,7 @@ Power_Status_t Power_Wakeup_Init ( void )
VCC12V0_OUT_EN = 1U; /*12V 电源使能*/ VCC12V0_OUT_EN = 1U; /*12V 电源使能*/
VCC05V0_OUT_EN = 1U; /*外设5V 电源使能*/ VCC05V0_OUT_EN = 1U; /*外设5V 电源使能*/
D1530_EN_MCU_OUT = 1U; /*1530 使能*/ D1530_EN_MCU_OUT = 1U; /*1530 使能*/
BL_ACC_EN = 1U; /*8867 使能*/ BL_ACC_EN = 1U; /*8867 使能*/
Fuel_VCC05V_OUT_EN = 1U ; /*燃油电源 使能*/ Fuel_VCC05V_OUT_EN = 1U ; /*燃油电源 使能*/
AIR_5V_OUT_EN = 1u; /*气压 5V*/ AIR_5V_OUT_EN = 1u; /*气压 5V*/
ACC5V_LED_PWM_MCU = 1u; ACC5V_LED_PWM_MCU = 1u;
...@@ -222,13 +221,16 @@ void Power_IG_ON_Init(void) ...@@ -222,13 +221,16 @@ void Power_IG_ON_Init(void)
UserGaugeK15Init() ;/*仪表IGON调用*/ UserGaugeK15Init() ;/*仪表IGON调用*/
/*end*/ /*end*/
/*5s不按按键计时清零*/ /*5s不按按键计时清零*/
//LongTimeNoKey_Operation_TimeRest(); //LongTimeNoKey_Operation_TimeRest();
CD4051B_KL15Init(); CD4051B_KL15Init();
GUI_Display_KL15_ON_Init(); GUI_Display_KL15_ON_Init();
/*气压1 气压2 WET气压数据初始化*/
AirPressure_KL15_ON_Init();
} }
Power_Status_t Power_Stay_ON(void) Power_Status_t Power_Stay_ON(void)
{ {
Power_Status_t u8PowerSts; Power_Status_t u8PowerSts;
......
source/Application/APP/SEG_LCD/SEG_DISPLAY.c
View file @ 8e698101
...@@ -1042,12 +1042,12 @@ void Seg_Display_Service(void) ...@@ -1042,12 +1042,12 @@ void Seg_Display_Service(void)
if (Ign_Time < 3100) if (Ign_Time < 3100)
{ {
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格 SEG_PRI_Display (GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格 SEG_SEC_Display (GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
SEG_Coolant_Display(GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); //水温格 SEG_Coolant_Display (GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); // 水温格
SEG_Fuel_Display(GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); //燃油格 SEG_Fuel_Display (GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL, 7u); // 燃油格
SEG_Tacho_Display(GetGaugesCurrentPos(RevGauges), GUI_DISP_MODE_NORMAL, 7u); //转速格 SEG_Tacho_Display (GetGaugesCurrentPos(RevGauges), GUI_DISP_MODE_NORMAL, 7u); // 转速格
SEG_VehicleSpeed_Display(GetGaugesCurrentPos(VehGauges), GUI_DISP_MODE_NORMAL, 7u); //车速格 SEG_VehicleSpeed_Display(GetGaugesCurrentPos(VehGauges), GUI_DISP_MODE_NORMAL, 7u); // 车速格
/*车速数字 暂时没有变化，只是全部点亮*/ /*车速数字 暂时没有变化，只是全部点亮*/
Seg_Digit_1_Disp(12); Seg_Digit_1_Disp(12);
...@@ -1060,21 +1060,21 @@ void Seg_Display_Service(void) ...@@ -1060,21 +1060,21 @@ void Seg_Display_Service(void)
{ {
GaugesTimer = 15u; GaugesTimer = 15u;
if (AirPressure_Get_Valid(0)) if (Common_Get_Air1_Valid())
{ {
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格 SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_NORMAL, 7u); // PRI气压格
} }
else else
{ {
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_INVALID, 7u); // PRI气压格 SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_INVALID, 7u); // PRI气压格
} }
if (AirPressure_Get_Valid(1)) if (Common_Get_Air2_Valid())
{ {
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格 SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_NORMAL, 7u); // SEC气压格
} }
else else
{ {
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_INVALID, 7u); // SEC气压格 SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_INVALID, 7u); // SEC气压格
} }
if (Coolant_Get_Valid()) if (Coolant_Get_Valid())
...@@ -1123,8 +1123,8 @@ void Seg_Display_Service(void) ...@@ -1123,8 +1123,8 @@ void Seg_Display_Service(void)
{ {
SEG_A25_Disp(0u); //左侧弧线 SEG_A25_Disp(0u); //左侧弧线
SEG_C25_Disp(0u); //右侧弧线 SEG_C25_Disp(0u); //右侧弧线
SEG_PRI_Display(AirPressure_Get_CurSeg(0), GUI_DISP_MODE_BLANK, 0u); // PRI气压格 SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges), GUI_DISP_MODE_BLANK, 0u); // PRI气压格
SEG_SEC_Display(AirPressure_Get_CurSeg(1), GUI_DISP_MODE_BLANK, 0u); // SEC气压格 SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges), GUI_DISP_MODE_BLANK, 0u); // SEC气压格
SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //水温格 SEG_Coolant_Display(Coolant_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //水温格
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //燃油格 SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //转速格 SEG_Tacho_Display(Tacho_Get_CurSeg(), GUI_DISP_MODE_BLANK, 0u); //转速格
......
source/Application/CAN_APP_NM/CAN_App/CAN_FUNC.c
View file @ 8e698101
...@@ -68,8 +68,8 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData []) ...@@ -68,8 +68,8 @@ void Can_Set_Buff_18FEAE17(uint8_t CopyData [])
{ {
MsgMap.Data[ i ] = 0xff ; MsgMap.Data[ i ] = 0xff ;
} }
MsgMap.bit.Service_Brake_Circuit1_AirPressure = (uint8_t)(AirPressure_Get_kPa(0) >> 3) ; //MsgMap.bit.Service_Brake_Circuit1_AirPressure = (uint8_t)(AirPressure_Get_kPa(0) >> 3) ;
MsgMap.bit.Service_Brake_Circuit2_AirPressure = (uint8_t)(AirPressure_Get_kPa(1) >> 3) ; //MsgMap.bit.Service_Brake_Circuit2_AirPressure = (uint8_t)(AirPressure_Get_kPa(1) >> 3) ;
if (RTE_Read_KL30_Valid()) if (RTE_Read_KL30_Valid())
{ {
......
source/Driver/Memory/Emulated_EEPROM.c
View file @ 8e698101
...@@ -50,9 +50,9 @@ static const EEPROM_Block_st_t g_stEEPROMBlockTable[] = ...@@ -50,9 +50,9 @@ static const EEPROM_Block_st_t g_stEEPROMBlockTable[] =
{0xFF200580UL, 0xFF20067FUL, EEPROM_BLOCK5_BUFFER_SIZE, g_u32EEPROMBlock5Buffer,}, {0xFF200580UL, 0xFF20067FUL, EEPROM_BLOCK5_BUFFER_SIZE, g_u32EEPROMBlock5Buffer,},
{0xFF200680UL, 0xFF200A7FUL, EEPROM_BLOCK6_BUFFER_SIZE, g_u32EEPROMBlock6Buffer,}, {0xFF200680UL, 0xFF200A7FUL, EEPROM_BLOCK6_BUFFER_SIZE, g_u32EEPROMBlock6Buffer,},
{0xFF200A80UL, 0xFF200F7FUL, EEPROM_BLOCK7_BUFFER_SIZE, g_u32EEPROMBlock7Buffer,}, {0xFF200A80UL, 0xFF200F7FUL, EEPROM_BLOCK7_BUFFER_SIZE, g_u32EEPROMBlock7Buffer,},
{0xFF200F80UL, 0xFF20197FUL, EEPROM_BLOCK8_BUFFER_SIZE, g_u32EEPROMBlock8Buffer,}, {0xFF200F80UL, 0xFF20377FUL, EEPROM_BLOCK8_BUFFER_SIZE, g_u32EEPROMBlock8Buffer,},
{0xFF201980UL, 0xFF2019FFUL, EEPROM_BLOCK9_BUFFER_SIZE, g_u32EEPROMBlock9Buffer,}, {0xFF203780UL, 0xFF2037FFUL, EEPROM_BLOCK9_BUFFER_SIZE, g_u32EEPROMBlock9Buffer,},
{0xFF201A00UL, 0xFF201AFFUL, EEPROM_BLOCK10_BUFFER_SIZE, g_u32EEPROMBlock10Buffer,}, {0xFF203800UL, 0xFF2038FFUL, EEPROM_BLOCK10_BUFFER_SIZE, g_u32EEPROMBlock10Buffer,},
}; };
/**************************************************************************** /****************************************************************************
......
source/Driver/Memory/Emulated_EEPROM.h
View file @ 8e698101
...@@ -46,7 +46,7 @@ enum g_enEEPROMBlockName ...@@ -46,7 +46,7 @@ enum g_enEEPROMBlockName
#define EEPROM_BLOCK_UDS_DTC_SIZE (76U)/*Life:20.0W*/ #define EEPROM_BLOCK_UDS_DTC_SIZE (76U)/*Life:20.0W*/
#define EEPROM_BLOCK_ODO_SIZE (4U)/*Life:1000.0W*/ #define EEPROM_BLOCK_ODO_SIZE (4U)/*Life:1000.0W*/
#define EEPROM_BLOCK_ODO_STAMP_SIZE (8U)/*Life:1000.0W*/ #define EEPROM_BLOCK_ODO_STAMP_SIZE (8U)/*Life:1000.0W*/
#define EEPROM_BLOCK_TRIP_STAMP_SIZE (16U)/*Life:1000.0W*/ #define EEPROM_BLOCK_TRIP_STAMP_SIZE (80U)/*Life:1000.0W*/
#define EEPROM_BLOCK_SERVICE_INFO_SIZE (56U)/*Life:20.0W*/ #define EEPROM_BLOCK_SERVICE_INFO_SIZE (56U)/*Life:20.0W*/
#define EEPROM_BLOCK_EOL_K_LINE_SIZE (64U)/*Life:20.0W*/ #define EEPROM_BLOCK_EOL_K_LINE_SIZE (64U)/*Life:20.0W*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment