#include "SEG_DISPLAY.h"
#include "Seg_Ref.h"
#include "Common_Interface.h"
#include "Data_Fuel_User.h"
#include "Data_AirPressure.h"
#include "Data_CoolantTemperature.h"
#include "Data_EngineSpeed.h"
#include "Data_VehicleSpeed.h"
#include "GaugesInterface.h"
#define PRI_SEG_NUM_MAX 17U
#define SEC_SEG_NUM_MAX 17U
#define COOLANT_SEG_NUM_MAX 12U
#define FUEL_SEG_NUM_MAX 12U
#define TACHO_SEG_NUM_MAX 27U
#define VEH_SEG_NUM_MAX 30U
static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank , uint8_t *DigitBuf , uint8_t *Reg );
static void Seg_Digit_1_Disp (uint8_t Digit);
static void Seg_Digit_2_Disp (uint8_t Digit);
static void Seg_Digit_3_Disp (uint8_t Digit);
static void SEG_PRI_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_SEC_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_Coolant_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_Fuel_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_Tacho_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_VehicleSpeed_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status) ;
static void SEG_VehicleSpeed_Num(uint16_t Value, uint8_t Valid) ;
/*ZH:*/
/*****************************************************************************
某某灯(红)//_1_差速器锁
******************************************************************************/
void SEG_LED_INTER_DIFF_LOCK_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_36, seg_status);
}
/*****************************************************************************
某某灯(红)//_2_智能四驱故障
******************************************************************************/
void SEG_LED_FOUR_MUL_FOUR_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_35, seg_status);
}
/*****************************************************************************
某某灯(红)//_3_再生指示灯
******************************************************************************/
void SEG_LED_EXH_BRAKE_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_33, seg_status);
}
/*****************************************************************************
//_4_预热指示灯
******************************************************************************/
void SEG_LED_QOS_GLOW_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_32, seg_status);
}
/*****************************************************************************
//_5_远光灯开启提示
******************************************************************************/
void SEG_LED_HI_BEAM_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_31, seg_status);
}
/*****************************************************************************
//_6_后雾灯开启提示
******************************************************************************/
void SEG_LED_Rr_FOG_LAMP_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_161, seg_status);
}
/*****************************************************************************
//_7_发动机故障灯
******************************************************************************/
void SEG_LED_MIL_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_160, seg_status);
}
/*****************************************************************************
//_8_维修保养指示灯
******************************************************************************/
void SEG_LED_SVS_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_159, seg_status);
}
/*****************************************************************************
//_9_上坡起步辅助系统
******************************************************************************/
void SEG_LED_H_S_A__T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_158, seg_status);
}
/*****************************************************************************
//_10_减速器指示灯
******************************************************************************/
void SEG_LED_RETARDER_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_157, seg_status);
}
/*****************************************************************************
//_11_自动调灯
******************************************************************************/
void SEG_LED_AUTO_LEVELING_T(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_156, seg_status);
}
/*****************************************************************************
//_12_行侧报警灯
******************************************************************************/
void SEG_LED_ROWS_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_126, seg_status);
}
/*****************************************************************************
//_13_后视镜bsm警报信号灯
******************************************************************************/
void SEG_LED_BSM_OFF_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_127, seg_status);
}
/*****************************************************************************
//_14_紧急刹车辅助系统
******************************************************************************/
void SEG_LED_AEBS_OFF_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_128, seg_status);
}
/*****************************************************************************
//_15_LDW系统状态提示故障报警
******************************************************************************/
void SEG_LED_LDWS_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_129, seg_status);
}
/*****************************************************************************
//_16_安全气囊
******************************************************************************/
void SEG_LED_SRS_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_122, seg_status);
}
/*****************************************************************************
//_17_机油压力异常报警
******************************************************************************/
void SEG_LED_ENG_OIL_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_123, seg_status);
}
/*****************************************************************************
//_18_蓄电池充电状态提示
******************************************************************************/
void SEG_LED_CHARG_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_124, seg_status);
}
/*****************************************************************************
//_19_安全带
******************************************************************************/
void SEG_LED_SEAT_BELT_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_125, seg_status);
}
/*****************************************************************************
//_20_智能四驱故障
******************************************************************************/
void SEG_LED_RR_DIFF_LOCK_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_118, seg_status);
}
/*****************************************************************************
//TPMS系统故障报警
******************************************************************************/
void SEG_LED_TPMS_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_119, seg_status);
}
/*****************************************************************************
//_22_ASR/EVSC/ESC系统关闭提示
******************************************************************************/
void SEG_LED_ASR_or_EVSC_OFF_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_120, seg_status);
}
/*****************************************************************************
//_23_EVSC/ESP/ESC/TCS系统介入提示//故障报警
******************************************************************************/
void SEG_LED_EVSC_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_121, seg_status);
}
/*****************************************************************************
//_24_怠速启停系统状态提示-停机
******************************************************************************/
void SEG_LED_eco_stop_OFF_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_76, seg_status);
}
/*****************************************************************************
//_25_自动变速箱系统故障报警
******************************************************************************/
void SEG_LED_AMT_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_77, seg_status);
}
/*****************************************************************************
//_26_制动刹车片磨损指示灯
******************************************************************************/
void SEG_LED_WEAR_IND_L(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_78, seg_status);
}
/*****************************************************************************
//_27_挂车制动阀指示灯
******************************************************************************/
void SEG_LED_TRAILER_BRAKE_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_107, seg_status);
}
/*****************************************************************************
//_28_制动液不足报警-制动系统故障报警 （下黄）
******************************************************************************/
void SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_108, seg_status);
}
/*****************************************************************************
//_29_气动避震指示灯
******************************************************************************/
void SEG_LED_ACC_AIR_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_109, seg_status);
}
/*****************************************************************************
//_30_ABS系统故障报警
******************************************************************************/
void SEG_LED_ABS_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_110, seg_status);
}
/*****************************************************************************
//_31_驻车制动器/EPB系统处于制动状态提示/AUTO HOLD驻车提示
******************************************************************************/
void SEG_LED_PARK_BRAKE_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_31, seg_status);
}
/*****************************************************************************
//_32_制动液不足报警/制动系统故障报警 （上红）
******************************************************************************/
void SEG_LED_BRAKE_AIR_or_EBS_RED_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_32, seg_status);
}
/*****************************************************************************
//_34_制动器锁
******************************************************************************/
void SEG_LED_BRAKE_LOCK_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_33, seg_status);
}
/*****************************************************************************
//_35_空气悬架指示灯----FULL
******************************************************************************/
void SEG_LED_AIR_SUS_R(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_34, seg_status);
}
/*****************************************************************************
//_36_拖车ABS系统故障报警
******************************************************************************/
void SEG_LED_TRAILER_ABS_U(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_138, seg_status);
}
/*****************************************************************************
//_37_工作灯
******************************************************************************/
void SEG_LED_WORKING_LAMP_U(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_55, seg_status);
}
/*****************************************************************************
//_38_拖车ABS信息
******************************************************************************/
void SEG_LED_TRAILER_ABS_INFO_U(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_137, seg_status);
}
/*****************************************************************************
//_39_右转向灯
******************************************************************************/
void SEG_LED_TURN_RIGHT(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_155, seg_status);
}
/*****************************************************************************
//_40_左转向灯
******************************************************************************/
void SEG_LED_TURN_LEFT(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_37, seg_status);
}
/*:ZH*/
/*****************************************************************************
常显示
******************************************************************************/
//左侧弧线
void SEG_A25_Disp(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_56, seg_status);
}
//右侧弧线
void SEG_C25_Disp(uint8_t seg_status)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_136, seg_status);
}
/******************************************************************************
段码对应表
******************************************************************************/
#define NUM_1A(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_45, x);
#define NUM_1B(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_44, x);
#define NUM_1C(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_41, x);
#define NUM_1D(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_39, x);
#define NUM_1E(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_38, x);
#define NUM_1F(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_35, x);
#define NUM_1G(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_40, x);
#define NUM_1H(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_36, x);
#define NUM_1J(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_37, x);
#define NUM_1K(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_42, x);
#define NUM_1L(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_43, x);
#define NUM_2A(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_56, x);
#define NUM_2B(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_55, x);
#define NUM_2C(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_52, x);
#define NUM_2D(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_50, x);
#define NUM_2E(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_49, x);
#define NUM_2F(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_46, x);
#define NUM_2G(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_51, x);
#define NUM_2H(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_47, x);
#define NUM_2J(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_48, x);
#define NUM_2K(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_53, x);
#define NUM_2L(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_54, x);
#define NUM_3A(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_67, x);
#define NUM_3B(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_66, x);
#define NUM_3C(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_63, x);
#define NUM_3D(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_61, x);
#define NUM_3E(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_60, x);
#define NUM_3F(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_57, x);
#define NUM_3G(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_62, x);
#define NUM_3H(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_58, x);
#define NUM_3J(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_59, x);
#define NUM_3K(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_64, x);
#define NUM_3L(x) SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_65, x);
// L K J //H G F E D C B A
//0 1 1 1 //1 0 1 1 1 1 1 1 // 0x07Bf
//1 1 1 0 //0 0 0 0 0 1 1 0 // 0x0606
//2 0 1 1 //0 1 0 1 1 0 1 1 // 0x035b
//3 1 1 0 //0 1 0 0 1 1 1 1 // 0x064f
//4 1 1 1 //0 1 1 0 0 1 1 0 // 0x0766
//5 0 1 1 //0 1 1 0 1 1 0 1 // 0x036d
//6 0 1 1 //1 1 1 1 1 1 0 1 // 0x03fd
//7 1 1 0 //0 0 0 0 0 1 1 1 // 0x0607
//8 0 1 1 //0 1 1 1 1 1 1 1 // 0x037f
//9 1 1 1 //0 1 1 0 1 1 1 1 // 0x076f
// 0 0 0 0 0 0 0 0 0 0 0 // 0x0000
//'-' 0 0 0 0 1 0 0 0 0 0 0 // 0x0040
static const uint16_t Seg_Digit_Nomal[] =
{
/**0** | **1** |**2** | **3** | **4** | **5** | **6** | **7** | **8** | **9** | **10 black** | **11 --** | **all light --**/
0x07Bf , 0x0606 , 0x035b , 0x064f , 0x0766 , 0x036d , 0x03fd , 0x0607 , 0x037f , 0x076f , 0x0000 , 0x0040 , 0xffff ,
} ;
static void Seg_Digit_1_Disp (uint8_t Digit)
{
uint8_t MUN_A;
uint8_t MUN_B;
uint8_t MUN_C;
uint8_t MUN_D;
uint8_t MUN_E;
uint8_t MUN_F;
uint8_t MUN_G;
uint8_t MUN_H;
uint8_t MUN_J;
uint8_t MUN_K;
uint8_t MUN_L;
MUN_A = ( ((1 << 0) & Seg_Digit_Nomal[Digit]) >> 0) ? 7 : 0;
MUN_B = ( ((1 << 1) & Seg_Digit_Nomal[Digit]) >> 1) ? 7 : 0;
MUN_C = ( ((1 << 2) & Seg_Digit_Nomal[Digit]) >> 2) ? 7 : 0;
MUN_D = ( ((1 << 3) & Seg_Digit_Nomal[Digit]) >> 3) ? 7 : 0;
MUN_E = ( ((1 << 4) & Seg_Digit_Nomal[Digit]) >> 4) ? 7 : 0;
MUN_F = ( ((1 << 5) & Seg_Digit_Nomal[Digit]) >> 5) ? 7 : 0;
MUN_G = ( ((1 << 6) & Seg_Digit_Nomal[Digit]) >> 6) ? 7 : 0;
MUN_H = ( ((1 << 7) & Seg_Digit_Nomal[Digit]) >> 7) ? 7 : 0;
MUN_J = ( ((1 << 8) & Seg_Digit_Nomal[Digit]) >> 8) ? 7 : 0;
MUN_K = ( ((1 << 9) & Seg_Digit_Nomal[Digit]) >> 9) ? 7 : 0;
MUN_L = ( ((1 << 10) & Seg_Digit_Nomal[Digit]) >> 10) ? 7 : 0;
NUM_1A (MUN_A);
NUM_1B (MUN_B);
NUM_1C (MUN_C);
NUM_1D (MUN_D);
NUM_1E (MUN_E);
NUM_1F (MUN_F);
NUM_1G (MUN_G);
NUM_1H (MUN_H);
NUM_1J (MUN_J);
NUM_1K (MUN_K);
NUM_1L (MUN_L);
}
static void Seg_Digit_2_Disp (uint8_t Digit)
{
uint8_t MUN_A;
uint8_t MUN_B;
uint8_t MUN_C;
uint8_t MUN_D;
uint8_t MUN_E;
uint8_t MUN_F;
uint8_t MUN_G;
uint8_t MUN_H;
uint8_t MUN_J;
uint8_t MUN_K;
uint8_t MUN_L;
MUN_A = ( ((1 << 0) & Seg_Digit_Nomal[Digit]) >> 0) ? 7 : 0;
MUN_B = ( ((1 << 1) & Seg_Digit_Nomal[Digit]) >> 1) ? 7 : 0;
MUN_C = ( ((1 << 2) & Seg_Digit_Nomal[Digit]) >> 2) ? 7 : 0;
MUN_D = ( ((1 << 3) & Seg_Digit_Nomal[Digit]) >> 3) ? 7 : 0;
MUN_E = ( ((1 << 4) & Seg_Digit_Nomal[Digit]) >> 4) ? 7 : 0;
MUN_F = ( ((1 << 5) & Seg_Digit_Nomal[Digit]) >> 5) ? 7 : 0;
MUN_G = ( ((1 << 6) & Seg_Digit_Nomal[Digit]) >> 6) ? 7 : 0;
MUN_H = ( ((1 << 7) & Seg_Digit_Nomal[Digit]) >> 7) ? 7 : 0;
MUN_J = ( ((1 << 8) & Seg_Digit_Nomal[Digit]) >> 8) ? 7 : 0;
MUN_K = ( ((1 << 9) & Seg_Digit_Nomal[Digit]) >> 9) ? 7 : 0;
MUN_L = ( ((1 << 10) & Seg_Digit_Nomal[Digit]) >> 10) ? 7 : 0;
NUM_2A (MUN_A);
NUM_2B (MUN_B);
NUM_2C (MUN_C);
NUM_2D (MUN_D);
NUM_2E (MUN_E);
NUM_2F (MUN_F);
NUM_2G (MUN_G);
NUM_2H (MUN_H);
NUM_2J (MUN_J);
NUM_2K (MUN_K);
NUM_2L (MUN_L);
}
static void Seg_Digit_3_Disp (uint8_t Digit)
{
uint8_t MUN_A;
uint8_t MUN_B;
uint8_t MUN_C;
uint8_t MUN_D;
uint8_t MUN_E;
uint8_t MUN_F;
uint8_t MUN_G;
uint8_t MUN_H;
uint8_t MUN_J;
uint8_t MUN_K;
uint8_t MUN_L;
MUN_A = ( ((1 << 0) & Seg_Digit_Nomal[Digit]) >> 0) ? 7 : 0;
MUN_B = ( ((1 << 1) & Seg_Digit_Nomal[Digit]) >> 1) ? 7 : 0;
MUN_C = ( ((1 << 2) & Seg_Digit_Nomal[Digit]) >> 2) ? 7 : 0;
MUN_D = ( ((1 << 3) & Seg_Digit_Nomal[Digit]) >> 3) ? 7 : 0;
MUN_E = ( ((1 << 4) & Seg_Digit_Nomal[Digit]) >> 4) ? 7 : 0;
MUN_F = ( ((1 << 5) & Seg_Digit_Nomal[Digit]) >> 5) ? 7 : 0;
MUN_G = ( ((1 << 6) & Seg_Digit_Nomal[Digit]) >> 6) ? 7 : 0;
MUN_H = ( ((1 << 7) & Seg_Digit_Nomal[Digit]) >> 7) ? 7 : 0;
MUN_J = ( ((1 << 8) & Seg_Digit_Nomal[Digit]) >> 8) ? 7 : 0;
MUN_K = ( ((1 << 9) & Seg_Digit_Nomal[Digit]) >> 9) ? 7 : 0;
MUN_L = ( ((1 << 10) & Seg_Digit_Nomal[Digit]) >> 10) ? 7 : 0;
NUM_3A (MUN_A);
NUM_3B (MUN_B);
NUM_3C (MUN_C);
NUM_3D (MUN_D);
NUM_3E (MUN_E);
NUM_3F (MUN_F);
NUM_3G (MUN_G);
NUM_3H (MUN_H);
NUM_3J (MUN_J);
NUM_3K (MUN_K);
NUM_3L (MUN_L);
}
static void SEG_VehicleSpeed_Num(uint16_t Value, uint8_t Valid)
{
uint32_t VSPEED_FLAG ;
uint8_t Dig[3u];
uint8_t Seg_Trip_Display_Reg = 0u ;
if (Valid == GUI_DISP_MODE_BLANK)
{
Seg_Digit_1_Disp(10u);
Seg_Digit_2_Disp(10u);
Seg_Digit_3_Disp(10u);
}
else
{
VSPEED_FLAG = Value ;
VSPEED_FLAG = VSPEED_FLAG / 10u;
if (VSPEED_FLAG > 225u)
VSPEED_FLAG = 225u;
Seg_General_Digit_Display( (uint32_t)VSPEED_FLAG , 3u, 2u , Dig , &Seg_Trip_Display_Reg ) ;
switch ( Seg_Trip_Display_Reg )
{
case 0x02://二位数
Dig[2u] = 10u;
break;
case 0x03://一位数
Dig[2u] = 10u;
Dig[1u] = 10u;
break;
default :
break;
}
if (Valid == GUI_DISP_MODE_NORMAL)
{
Seg_Digit_1_Disp(Dig[2u]);
Seg_Digit_2_Disp(Dig[1u]);
Seg_Digit_3_Disp(Dig[0u]);
}
else
{
Seg_Digit_1_Disp(11u);//--
Seg_Digit_2_Disp(11u);//--
Seg_Digit_3_Disp(11u);//--
}
}
}
//主气压
static void SEG_PRI_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
static OldValue = 0xff ;
static uint8_t mSEG[ PRI_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_95, seg_status) ;//A63
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_96, seg_status) ;//A64
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_114, seg_status);//A82
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_115, seg_status);//A83
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_116, seg_status);//A84
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_117, seg_status);//A85
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < PRI_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0xff ;
}
else if(Valid == GUI_DISP_MODE_INVALID)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_114, 0);//A82
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_115, 0);//A83
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_116, 0);//A84
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_117, 0);//A85
for(i = 0 ;i < PRI_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0xff ;
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
//mSEG[0] = ((((1 << Value) - 1) & ( 1 << 0)) >> 0) ? seg_status : 0;
if(OldValue != Value)
{
OldValue = Value ;
for(i = 0 ;i < PRI_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 0 ;
}
}
}
}
}
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_97, mSEG[0]) ;//A65
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_98, mSEG[1]) ;//A66
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_99, mSEG[2]) ;//A67
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_100, mSEG[3]) ;//A68
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_101, mSEG[4]) ;//A69
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_102, mSEG[5]) ;//A70
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_103, mSEG[6]) ;//A71
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_104, mSEG[7]) ;//A72
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_105, mSEG[8]) ;//A73
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_106, mSEG[9]) ;//A74
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_107, mSEG[10]) ;//A75
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_108, mSEG[11]) ;//A76
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_109, mSEG[12]) ;//A77
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_110, mSEG[13]) ;//A78
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_111, mSEG[14]) ;//A79
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_112, mSEG[15]) ;//A80
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_113, mSEG[16]) ;//A81
}
//副气压
static void SEG_SEC_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
static OldValue = 0xff ;
static uint8_t mSEG[ SEC_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_68, seg_status);//B5
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_69, seg_status);//B6
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_70, seg_status);//B7
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_71, seg_status);//B8
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_72, seg_status);//B9
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_90, seg_status);//B27
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < SEC_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0xff ;
}
else if (Valid == GUI_DISP_MODE_INVALID)
{
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_70, 0);//B7
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_71, 0);//B8
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_72, 0);//B9
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_90, 0);//B27
for(i = 0 ;i < SEC_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0xff ;
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
if(OldValue != Value)
{
for(i = 0 ;i < SEC_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 0 ;
}
}
}
}
}
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_73, mSEG[0]) ;//B10
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_74, mSEG[1]) ;//B11
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_75, mSEG[2]) ;//B12
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_76, mSEG[3]) ;//B13
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_77, mSEG[4]) ;//B14
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_78, mSEG[5]) ;//B15
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_79, mSEG[6]) ;//B16
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_80, mSEG[7]) ;//B17
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_81, mSEG[8]) ;//B18
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_82, mSEG[9]) ;//B19
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_83, mSEG[10]) ;//B20
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_84, mSEG[11]) ;//B21
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_85, mSEG[12]) ;//B22
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_86, mSEG[13]) ;//B23
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_87, mSEG[14]) ;//B24
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_88, mSEG[15]) ;//B25
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_89, mSEG[16]) ;//B26
}
//水温
static void SEG_Coolant_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
static uint8_t OldValue = 0 ;
static uint8_t mSEG[ COOLANT_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_79, seg_status);//A47
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_92, seg_status);//A60
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_93, seg_status);//A61
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_94, seg_status);//A62
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < COOLANT_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0 ;
}
else if(Valid == GUI_DISP_MODE_INVALID)
{
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_92, 0u);//A60
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_93, 0u);//A61
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_94, 0u);//A62
for(i = 0 ;i < COOLANT_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
OldValue = 0 ;
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
if(OldValue != Value)
{
OldValue = Value ;
for(i = 0 ;i < COOLANT_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 0 ;
}
}
}
}
}
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_80, mSEG[0]) ;//A48
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_81, mSEG[1]) ;//A49
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_82, mSEG[2]) ;//A50
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_83, mSEG[3]) ;//A51
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_84, mSEG[4]) ;//A52
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_85, mSEG[5]) ;//A53
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_86, mSEG[6]) ;//A54
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_87, mSEG[7]) ;//A55
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_88, mSEG[8]) ;//A56
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_89, mSEG[9]) ;//A57
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_90, mSEG[10]) ;//A58
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_91, mSEG[11]) ;//A59
}
//燃油
static void SEG_Fuel_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
uint8_t mSEG[ FUEL_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_91, seg_status);//B28
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_92, seg_status);//B29
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_93, seg_status);//B30
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_106, seg_status);//B43
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < FUEL_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
for(i = 0 ;i < FUEL_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 0 ;
}
}
}
}
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_94 , mSEG[0]) ;//B31
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_95 , mSEG[1]) ;//B32
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_96 , mSEG[2]) ;//B33
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_97 , mSEG[3]) ;//B34
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_98 , mSEG[4]) ;//B35
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_99 , mSEG[5]) ;//B36
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_100, mSEG[6]) ;//B37
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_101, mSEG[7]) ;//B38
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_102, mSEG[8]) ;//B39
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_103, mSEG[9]) ;//B40
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_104, mSEG[10]) ;//B41
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_105, mSEG[11]) ;//B42
}
//转速
static void SEG_Tacho_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
uint8_t mSEG[ TACHO_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_38, seg_status);//A8
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_59, seg_status);//A27
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_65, seg_status);//A33
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_71, seg_status);//A39
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_40, seg_status);//A10
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_46, seg_status);//A16
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_51, seg_status);//A21
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < TACHO_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
for(i = 0 ;i < TACHO_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 1 ;
}
}
}
}
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_58, mSEG[0]);//A26
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_60, mSEG[1]);//A28
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_61, mSEG[2]);//A29
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_62, mSEG[3]);//A30
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_63, mSEG[4]);//A31
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_64, mSEG[5]);//A32
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_66, mSEG[6]);//A34
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_67, mSEG[7]);//A35
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_68, mSEG[8]);//A36
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_69, mSEG[9]);//A37
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_70, mSEG[10]);//A38
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_72, mSEG[11]);//A40
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_73, mSEG[12]);//A41
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_74, mSEG[13]);//A42
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_75, mSEG[14]);//A43
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_39, mSEG[15]);//A9
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_41, mSEG[16]);//A11
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_42, mSEG[17]);//A12
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_43, mSEG[18]);//A13
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_44, mSEG[19]);//A14
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_45, mSEG[20]);//A15
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_47, mSEG[21]);//A17
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_48, mSEG[22]);//A18
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_49, mSEG[23]);//A19
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_53, mSEG[24]);//A23
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_52, mSEG[25]);//A22
SEG_BUFF_Set(BU98_CHIP1, SEG_REDEFINE_50, mSEG[26]);//A20
}
//车速
static void SEG_VehicleSpeed_Display(uint8_t Value, uint8_t Valid,uint8_t seg_status)
{
uint8_t i ;
uint8_t mSEG[ VEH_SEG_NUM_MAX ] = {0} ;
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_154, seg_status);//C42
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_133, seg_status);//C23
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_128, seg_status);//C18
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_123, seg_status);//C13
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_118, seg_status);//C8
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_113, seg_status);//C3
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_151, seg_status);//C39
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_146, seg_status);//C34
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_141, seg_status);//C29
if(Value > VEH_SEG_NUM_MAX)
{
Value = VEH_SEG_NUM_MAX ;
}
if (Valid == GUI_DISP_MODE_BLANK)
{
for(i = 0 ;i < VEH_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = 0 ;
}
}
else
{
if (Valid == GUI_DISP_MODE_NORMAL)
{//eg: 5 -> 100000-> 11111
for(i = 0 ;i < VEH_SEG_NUM_MAX ;i ++ )
{
mSEG[i] = ((((1 << Value) - 1) & ( 1 << i)) >> i) ;
if(mSEG[i])
{
mSEG[i] = seg_status ;
}
else
{
mSEG[i] = 1 ;
}
}
}
}
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_134, mSEG[0]);//C24
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_132, mSEG[1]);//C22
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_131, mSEG[2]);//C21
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_130, mSEG[3]);//C20
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_129, mSEG[4]);//C19
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_127, mSEG[5]);//C17
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_126, mSEG[6]);//C16
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_125, mSEG[7]);//C15
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_124, mSEG[8]);//C14
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_122, mSEG[9]);//C12
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_121, mSEG[10]);//C11
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_120, mSEG[11]);//C10
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_119, mSEG[12]);//C9
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_117, mSEG[13]);//C7
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_116, mSEG[14]);//C6
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_115, mSEG[15]);//C5
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_114, mSEG[16]);//C4
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_112, mSEG[17]);//C2
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_111, mSEG[18]);//C1
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_153, mSEG[19]);//C41
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_152, mSEG[20]);//C40
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_150, mSEG[21]);//C38
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_149, mSEG[22]);//C37
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_148, mSEG[23]);//C36
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_147, mSEG[24]);//C35
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_145, mSEG[25]);//C33
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_144, mSEG[26]);//C32
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_143, mSEG[27]);//C31
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_142, mSEG[28]);//C30
SEG_BUFF_Set(BU98_CHIP0, SEG_REDEFINE_140, mSEG[29]);//C28
}
/******************************************************************************
函数名：Seg_General_Digit_Display
功 能：通用段数字显示程序
参 数：Digit：要显示的数字
Len : 需要显示的数字长度
Blank：首位数字为零消隐位数,从最高位起算
Reg : 寄存器变量
返回值：无
******************************************************************************/
static void Seg_General_Digit_Display(uint32_t Digit, uint8_t Len, uint8_t Blank , uint8_t *DigitBuf , uint8_t *Reg )
{
uint8_t i;
uint8_t ActLen;
ActLen = 0;
i = 0;
//以10进制形式拆分数字并计算实际数字长度
while (Digit)
{
DigitBuf[ActLen] = Digit % 10;
Digit /= 10;
ActLen++;
}
//数字为0时的特殊处理
if (ActLen == 0)
{
ActLen = 1;
DigitBuf[0] = 0;
}
//对未计算到的数字位作0填充
for (i = ActLen; i < Len; i++ )
DigitBuf[i] = 0;
//数字首部按消隐位数做零消隐
i = (Len - 1);
while ((DigitBuf[i] == 0) && (i >= (Len - Blank)))
{
DigitBuf[i] = 0xFF;
i--;
(*Reg) |= (1 << i) ;
}
}
static uint8_t wbyTestSeg = 0;
static uint16_t wbyTestNum ;
static uint8_t WBY_SET = 0 ;
void Seg_Display_Service(void)
{
uint32_t Ign_Time ;
Ign_Time = Common_GetIgnOnTime();
if (Common_Get_IG_Sts() == COMMON_POWER_ON)
{
if(WBY_SET == 1)
{
Seg_Display_ON();
}
else
{
SEG_A25_Disp(7u) ;//左侧弧线
SEG_C25_Disp(7u) ;//右侧弧线
if(Ign_Time < 3100)
//if(0)
{
SEG_PRI_Display(GetGaugesCurrentPos(PRIGasGauges),GUI_DISP_MODE_NORMAL,7u) ;//PRI气压格
SEG_SEC_Display(GetGaugesCurrentPos(SECGasGauges),GUI_DISP_MODE_NORMAL,7u) ;//SEC气压格
SEG_Coolant_Display(GetGaugesCurrentPos(TempGauges),GUI_DISP_MODE_NORMAL,7u) ;//水温格
SEG_Fuel_Display(GetGaugesCurrentPos(TempGauges), GUI_DISP_MODE_NORMAL,7u);//燃油格
SEG_Tacho_Display(GetGaugesCurrentPos(RevGauges),GUI_DISP_MODE_NORMAL,7u);//转速格
SEG_VehicleSpeed_Display(GetGaugesCurrentPos(VehGauges) ,GUI_DISP_MODE_NORMAL,7u);//车速格
Seg_Digit_1_Disp(12);
Seg_Digit_2_Disp(12);
Seg_Digit_3_Disp(12);
return ;
}
if(AirPressure_Get_Valid(0))
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0),GUI_DISP_MODE_NORMAL,7u) ;//PRI气压格
}
else
{
SEG_PRI_Display(AirPressure_Get_CurSeg(0),GUI_DISP_MODE_INVALID,7u) ;//PRI气压格
}
if(AirPressure_Get_Valid(1))
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1),GUI_DISP_MODE_NORMAL,7u) ;//SEC气压格
}
else
{
SEG_SEC_Display(AirPressure_Get_CurSeg(1),GUI_DISP_MODE_INVALID,7u) ;//SEC气压格
}
if(Coolant_Get_Valid())
{
SEG_Coolant_Display(Coolant_Get_CurSeg(),GUI_DISP_MODE_NORMAL,7u) ;//水温格
}
else
{
SEG_Coolant_Display(Coolant_Get_CurSeg(),GUI_DISP_MODE_INVALID,7u) ;//水温格
}
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_NORMAL,7u);//燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(),GUI_DISP_MODE_NORMAL,7u);//转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(),GUI_DISP_MODE_NORMAL,7u);//车速格
wbyTestNum = Common_Get_Disp_V_Speed() ;
//Speed_Get_Display_Value()
SEG_VehicleSpeed_Num(wbyTestNum,GUI_DISP_MODE_NORMAL);//车速值
//SEG_PRI_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//PRI气压格
//SEG_SEC_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//SEC气压格
//SEG_Coolant_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u) ;//水温格
//SEG_Fuel_Display(wbyTestSeg, GUI_DISP_MODE_NORMAL,7u);//燃油格
//SEG_Tacho_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//转速格
//SEG_VehicleSpeed_Display(wbyTestSeg,GUI_DISP_MODE_NORMAL,7u);//车速格
//SEG_VehicleSpeed_Num(wbyTestNum,GUI_DISP_MODE_NORMAL);//车速值
}
}
else
{
SEG_A25_Disp(0u) ;//左侧弧线
SEG_C25_Disp(0u) ;//右侧弧线
SEG_PRI_Display(AirPressure_Get_CurSeg(0),GUI_DISP_MODE_BLANK,0u) ;//PRI气压格
SEG_SEC_Display(AirPressure_Get_CurSeg(1),GUI_DISP_MODE_BLANK,0u) ;//SEC气压格
SEG_Coolant_Display(Coolant_Get_CurSeg(),GUI_DISP_MODE_BLANK,0u) ;//水温格
SEG_Fuel_Display(Fuel_Get_CurSeg(), GUI_DISP_MODE_BLANK,0u);//燃油格
SEG_Tacho_Display(Tacho_Get_CurSeg(),GUI_DISP_MODE_BLANK,0u);//转速格
SEG_VehicleSpeed_Display(Speed_Get_CurSeg(),GUI_DISP_MODE_BLANK,0u);//车速格
SEG_VehicleSpeed_Num(0u,GUI_DISP_MODE_BLANK);//车速值
}
}
void Seg_Display_ON(void)
{
BU98_CHIP_NUM_t chip_num;
BU98_SEG_NUM_t seg_num;
for (chip_num = BU98_CHIP0; chip_num < BU98_CHIP_MAX; chip_num++)
{
for (seg_num = SEG_REDEFINE_1; seg_num < BU98R10_SEG_MAX; seg_num++)
{
SEG_BUFF_Set(chip_num,seg_num,7);
}
}
}
void Seg_Display_OFF(void)
{
BU98_CHIP_NUM_t chip_num;
BU98_SEG_NUM_t seg_num;
for (chip_num = BU98_CHIP0; chip_num < BU98_CHIP_MAX; chip_num++)
{
for (seg_num = SEG_REDEFINE_1; seg_num < BU98R10_SEG_MAX; seg_num++)
{
SEG_BUFF_Set(chip_num,seg_num,0);
}
}
}