//ZH修改2021年8月27日16:58:42
#include "GPIO.h"
#include "Telltales.h"
#include "Telltales_user.h"
#include "CAN_Communication_Matrix.h"
#include "Flash_synchronizer.h"
#include "EOL_Para.h"
#include "Sound_Scheduler.h"
#include "SEG_DISPLAY.h"
#include "Maintenance.h"
#include "Line_in.h"
#include "IS31FL3236.h"
TelltaleLRCtrlStruct TelltaleLRCtrl;
const LED_Attribute_st LED_Attribute[LED_Max] =
{
/* 指示灯索引 是否自检 外部信号自检 工作电源状态 自检开始时间 自检持续时间 指示灯点亮条件 指示灯执行函数 */
{ em_LED_INTER_DIFF_LOCK_T , NoSelfCheck , ExterNalCheck , LED_IGN_ON_OFF , 0u, 3000ul, LED_INTER_DIFF_LOCK_T_Judgement , LED_INTER_DIFF_LOCK_T_Execution },
{ em_LED_FOUR_MUL_FOUR_T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_FOUR_MUL_FOUR_T_Judgement , LED_FOUR_MUL_FOUR_T_Execution },
{ em_LED_EXH_BRAKE_T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_EXH_BRAKE_T_Judgement , LED_EXH_BRAKE_T_Execution },
{ em_LED_QOS_GLOW_T , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_QOS_GLOW_T_Judgement , LED_QOS_GLOW_T_Execution },
{ em_LED_HI_BEAM_T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_HI_BEAM_T_Judgement , LED_HI_BEAM_T_Execution },
{ em_LED_Rr_FOG_LAMP_T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_Rr_FOG_LAMP_T_Judgement , LED_Rr_FOG_LAMP_T_Execution },
{ em_LED_MIL_T , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_MIL_T_Judgement , LED_MIL_T_Execution },
{ em_LED_SVS_T , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_SVS_T_Judgement , LED_SVS_T_Execution },
{ em_LED_H_S_A__T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_H_S_A_T_Judgement , LED_H_S_A_T_Execution },
{ em_LED_RETARDER_T , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_RETARDER_T_Judgement , LED_RETARDER_T_Execution },
{ em_LED_AUTO_LEVELING_T , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_AUTO_LEVELING_T_Judgement , LED_AUTO_LEVELING_T_Execution },
{ em_LED_ROWS_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_ROWS_L_Judgement , LED_ROWS_L_Execution },
{ em_LED_BSM_OFF_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_BSM_OFF_L_Judgement , LED_BSM_OFF_L_Execution },
{ em_LED_AEBS_OFF_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_AEBS_OFF_L_Judgement , LED_AEBS_OFF_L_Execution },
{ em_LED_LDWS_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_LDWS_L_Judgement , LED_LDWS_L_Execution },
{ em_LED_SRS_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_SRS_L_Judgement , LED_SRS_L_Execution },
{ em_LED_ENG_OIL_L , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_ENG_OIL_L_Judgement , LED_ENG_OIL_L_Execution },
{ em_LED_CHARG_L , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_CHARG_L_Judgement , LED_CHARG_L_Execution },
{ em_LED_SEAT_BELT_L , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_SEAT_BELT_L_Judgement , LED_SEAT_BELT_L_Execution },
{ em_LED_RR_DIFF_LOCK_L , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_RR_DIFF_LOCK_L_Judgement , LED_RR_DIFF_LOCK_L_Execution },
{ em_LED_TPMS_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_TPMS_L_Judgement , LED_TPMS_L_Execution },
{ em_LED_ASR_or_EVSC_OFF_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_ASR_or_EVSC_OFF_L_Judgement , LED_ASR_or_EVSC_OFF_L_Execution },
{ em_LED_EVSC_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_EVSC_L_Judgement , LED_EVSC_L_Execution },
{ em_LED_eco_stop_OFF_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_eco_stop_OFF_L_Judgement , LED_eco_stop_OFF_L_Execution },
{ em_LED_AMT_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_AMT_L_Judgement , LED_AMT_L_Execution },
{ em_LED_WEAR_IND_L , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_WEAR_IND_L_Judgement , LED_WEAR_IND_L_Execution },
{ em_LED_TRAILER_BRAKE_R , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_TRAILER_BRAKE_R_Judgement , LED_TRAILER_BRAKE_R_Execution },
{ em_LED_BRAKE_AIR_or_EBS_YELLOW_R , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_BRAKE_AIR_or_EBS_YELLOW_R_Judgement , LED_BRAKE_AIR_or_EBS_YELLOW_R_Execution },
{ em_LED_ACC_AIR_R , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_ACC_AIR_R_Judgement , LED_ACC_AIR_R_Execution },
{ em_LED_ABS_R , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_ABS_R_Judgement , LED_ABS_R_Execution },
{ em_LED_PARK_BRAKE_R , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_PARK_BRAKE_R_Judgement , LED_PARK_BRAKE_R_Execution },
{ em_LED_BRAKE_AIR_or_EBS_RED_R , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_BRAKE_AIR_or_EBS_RED_R_Judgement , LED_BRAKE_AIR_or_EBS_RED_R_Execution },
{ em_LED_BRAKE_LOCK_R , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_BRAKE_LOCK_R_Judgement , LED_BRAKE_LOCK_R_Execution },
{ em_LED_AIR_SUS_R , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_AIR_SUS_R_Judgement , LED_AIR_SUS_R_Execution },
{ em_LED_TRAILER_ABS_U , SelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_TRAILER_ABS_U_Judgement , LED_TRAILER_ABS_U_Execution },
{ em_LED_WORKING_LAMP_U , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_WORKING_LAMP_U_Judgement , LED_WORKING_LAMP_U_Execution },
{ em_LED_TRAILER_ABS_INFO_U , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_TRAILER_ABS_INFO_U_Judgement , LED_TRAILER_ABS_INFO_U_Execution },
{ em_LED_TEMP , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_Temp_Judgement , LED_Temp_Execution },
{ em_LED_FUEL , NoSelfCheck , NoExterNalCheck , LED_IGN_ON , 0u, 3000ul, LED_Fuel_Judgement , LED_Fuel_Execution },
};
/*must put into 10ms task*/
void Telltales_Left_Right_KL30_Init(void);
void Telltales_Left_Right_KL30_Init(void)
{
TelltaleLRCtrl.LastRight = 0u;
TelltaleLRCtrl.LastLeft = 0u;
TelltaleLRCtrl.Delay = 0u;
}
/******************************************************************************
T3 L16 U1 U4 U5无灯 左右转向单独 气压1 气压2 指示灯是背光
******************************************************************************/
/******************************************************************************
T0 左转向 T13 右转向
信号接口：
信号定义：
输出信号：
******************************************************************************/
void Telltales_Left_Right_Management_Service(void) /*10ms*/
{
uint8_t Edge;
uint8_t RIGHT_ST = 0x00u;
uint8_t LEFT_ST = 0x00u;
RIGHT_ST = Line_In_Get_Status(LINE_IN_TURN_R);
LEFT_ST = Line_In_Get_Status(LINE_IN_TURN_L);
Edge = 0xffu ;
if (LEFT_ST == 1u)//左转向
{
SEG_LED_TURN_LEFT(7);//左转向断码屏开
IS31_CHIP0_CHANNEL36 = 0x3Fu;
}
else
{
SEG_LED_TURN_LEFT(0);
IS31_CHIP0_CHANNEL36 = 0x00u;
}
if (TelltaleLRCtrl.LastLeft != LEFT_ST)
{
TelltaleLRCtrl.LastLeft = LEFT_ST;
Edge = LEFT_ST;
}
if (RIGHT_ST == 1u)//右转向
{
SEG_LED_TURN_RIGHT(7);//右转向断码屏开
IS31_CHIP0_CHANNEL24 = 0x3Fu;
}
else
{
SEG_LED_TURN_RIGHT(0);
IS31_CHIP0_CHANNEL24 = 0x00u;
}
if (TelltaleLRCtrl.LastRight != RIGHT_ST)
{
TelltaleLRCtrl.LastRight = RIGHT_ST;
Edge = RIGHT_ST;
}
if (TelltaleLRCtrl.Delay > 0u)
{
TelltaleLRCtrl.Delay--;
}
else
{
if (Edge != 0xFFu)
{
if (Edge)
{
Sound_Request(SND_TICK, 1u);
}
else
{
Sound_Request(SND_TOCK, 1u);
}
TelltaleLRCtrl.Delay = 10u; /*200ms内不允许重复播放声音*/
}
else
{
Sound_Delete(SND_TICK);
Sound_Delete(SND_TOCK);
}
}
}
#if 0
/*************************************
测试用
**************************************/
void Test_LED_AllLight(void)
{
LED_INTER_DIFF_LOCK_T_Execution(LED_ON_State);
LED_FOUR_MUL_FOUR_T_Execution(LED_ON_State);
LED_EXH_BRAKE_T_Execution(LED_ON_State);
LED_QOS_GLOW_T_Execution(LED_ON_State);
LED_HI_BEAM_T_Execution(LED_ON_State);
LED_Rr_FOG_LAMP_T_Execution(LED_ON_State);
LED_MIL_T_Execution(LED_ON_State);
LED_SVS_T_Execution(LED_ON_State);
LED_H_S_A__T_Execution(LED_ON_State);
LED_RETARDER_T_Execution(LED_ON_State);
LED_AUTO_LEVELING_T_Execution(LED_ON_State);
LED_ROWS_L_Execution(LED_ON_State);
LED_BSM_OFF_L_Execution(LED_ON_State);
LED_AEBS_OFF_L_Execution(LED_ON_State);
LED_LDWS_L_Execution(LED_ON_State);
LED_SRS_L_Execution(LED_ON_State);
LED_ENG_OIL_L_Execution(LED_ON_State);
LED_CHARG_L_Execution(LED_ON_State);
LED_SEAT_BELT_L_Execution(LED_ON_State);
LED_RR_DIFF_LOCK_L_Execution(LED_ON_State);
LED_TPMS_L_Execution(LED_ON_State);
LED_ASR_or_EVSC_OFF_L_Execution(LED_ON_State);
LED_EVSC_L_Execution(LED_ON_State);
LED_eco_stop_OFF_L_Execution(LED_ON_State);
LED_AMT_L_Execution(LED_ON_State);
LED_WEAR_IND_L_Execution(LED_ON_State);
LED_TRAILER_BRAKE_R_Execution(LED_ON_State);
LED_BRAKE_AIR_or_EBS_YELLOW_R_Execution(LED_ON_State);
LED_ACC_AIR_R_Execution(LED_ON_State);
LED_ABS_R_Execution(LED_ON_State);
LED_PARK_BRAKE_R_Execution(LED_ON_State);
LED_BRAKE_AIR_or_EBS_RED_R_Execution(LED_ON_State);
LED_BRAKE_LOCK_R_Execution(LED_ON_State);
LED_AIR_SUS_R_Execution(LED_ON_State);
LED_TRAILER_ABS_U_Execution(LED_ON_State);
LED_WORKING_LAMP_U_Execution(LED_ON_State);
LED_TRAILER_ABS_INFO_U_Execution(LED_ON_State);
}
#endif
/*ZH:*/
#define XXXX 0u
#define LED_BRIGHTNESS 0xff
uint8_t HYQ = 0U;
/******************************************************************************
T1 INTER DIFF LOCK
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_INTER_DIFF_LOCK_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_INTER_DIFF_LOCK_T_Execution(uint8_t led_status)
{
RR_DIFF_LOCK_MCU = led_status;
if (led_status == 1)
{
SEG_LED_INTER_DIFF_LOCK_T(7);
}
else
{
SEG_LED_INTER_DIFF_LOCK_T(0);
}
}
/******************************************************************************
T2
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_FOUR_MUL_FOUR_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_FOUR_MUL_FOUR_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL35 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL35 = 0x00;
}
if (led_status == 1)
{
SEG_LED_FOUR_MUL_FOUR_T(7);
}
else
{
SEG_LED_FOUR_MUL_FOUR_T(0);
}
}
/******************************************************************************
T4 EXH BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_EXH_BRAKE_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FF2300_Sig_Exh_Lamp();
if (m_Condition1 == 0x01u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_EXH_BRAKE_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL34 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL34 = 0x00;
}
if (led_status == 1)
{
SEG_LED_EXH_BRAKE_T(7);
}
else
{
SEG_LED_EXH_BRAKE_T(0);
}
}
/******************************************************************************
T5 QOS(GLOW)
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_QOS_GLOW_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FF2300_Sig_Glow_Lamp();
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_QOS_GLOW_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL33 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL33 = 0x00;
}
if (led_status == 1)
{
SEG_LED_QOS_GLOW_T(7);
}
else
{
SEG_LED_QOS_GLOW_T(0);
}
}
/******************************************************************************
T6 HI BEAM
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_HI_BEAM_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_HI_BEAM);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_HI_BEAM_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL32 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL32 = 0x00;
}
if (led_status == 1)
{
SEG_LED_HI_BEAM_T(7);
}
else
{
SEG_LED_HI_BEAM_T(0);
}
}
/******************************************************************************
T7 Rr FOG LAMP
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_Rr_FOG_LAMP_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_Rr_FOG_LAMP);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_Rr_FOG_LAMP_T_Execution(uint8_t led_status)
{
T7_LED_OUT = led_status;
if (led_status == 1)
{
SEG_LED_Rr_FOG_LAMP_T(7);
}
else
{
SEG_LED_Rr_FOG_LAMP_T(0);
}
}
/******************************************************************************
T8 MIL
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_MIL_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_MIL);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_MIL_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL31 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL31 = 0x00;
}
if (led_status == 1)
{
SEG_LED_MIL_T(7);
}
else
{
SEG_LED_MIL_T(0);
}
}
/******************************************************************************
T9 SVS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_SVS_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FED900_Sig_SVS_Lamp_Status();
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_SVS_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL30 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL30 = 0x00;
}
if (led_status == 1)
{
SEG_LED_SVS_T(7);
}
else
{
SEG_LED_SVS_T(0);
}
}
/******************************************************************************
T10 H.S.A
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_H_S_A_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_H_S_A_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL28 = LED_BRIGHTNESS; // 绿灯 亮
IS31_CHIP0_CHANNEL29 = 0x00; // 黄灯 灭
}
else if (led_status == 2)
{
IS31_CHIP0_CHANNEL28 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL29 = LED_BRIGHTNESS; // 黄灯 亮
}
else
{
IS31_CHIP0_CHANNEL28 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL29 = 0x00; // 黄灯 灭
}
if ((led_status == 1) || (led_status == 2))
{
SEG_LED_H_S_A_T(7);
}
else
{
SEG_LED_H_S_A_T(0);
}
}
/******************************************************************************
T11 RETARDER
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_RETARDER_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FF5510_Sig_Intarder_Pilot_Lamp_State();
if (K_Line_Set.K_Line_LID41 == 0x13u)
{
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else if (m_Condition1 == 2u)
{
if (FLASH_SYNC_1Hz == 1u)
{
u8Result = 2u;
}
else
{
u8Result = 0u;
}
}
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_RETARDER_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL27 = LED_BRIGHTNESS; // 绿灯 亮
IS31_CHIP0_CHANNEL26 = 0x00; // 黄灯 灭
}
else if (led_status == 2)
{
IS31_CHIP0_CHANNEL27 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL26 = LED_BRIGHTNESS; // 黄灯 亮
}
else
{
IS31_CHIP0_CHANNEL27 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL26 = 0x00; // 黄灯 灭
}
if ((led_status == 1) || (led_status == 2))
{
SEG_LED_RETARDER_T(7);
}
else
{
SEG_LED_RETARDER_T(0);
}
}
/******************************************************************************
T12 AUTO LEVELING
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_AUTO_LEVELING_T_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_AUTO_LEVELING_T_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL25 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL25 = 0x00;
}
if (led_status == 1)
{
SEG_LED_AUTO_LEVELING_T(7);
}
else
{
SEG_LED_AUTO_LEVELING_T(0);
}
}
/******************************************************************************
L1 ROWS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_ROWS_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_ROWS_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL01 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL01 = 0x00;
}
if (led_status == 1)
{
SEG_LED_ROWS_L(7);
}
else
{
SEG_LED_ROWS_L(0);
}
}
/******************************************************************************
L2 BSM OFF
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BSM_OFF_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_BSM_OFF_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL02 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL02 = 0x00;
}
if (led_status == 1)
{
SEG_LED_BSM_OFF_L(7);
}
else
{
SEG_LED_BSM_OFF_L(0);
}
}
/******************************************************************************
L3 AEBS OFF
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_AEBS_OFF_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
m_Condition1 = (uint8_t)Get_ID_CF02F2A_Sig_Advanced_Emerg_Braking_Sys_Sta();
m_Condition2 = (uint8_t)Get_ID_CF02FA1_Sig_Advanced_Emerg_Braking_Sys_Sta();
m_Condition3 = (uint8_t)Get_ID_CF02FA0_Sig_Advanced_Emerg_Braking_Sys_Sta();
if (K_Line_Set.K_Line_LID28 == 0x01u)
{
if ((m_Condition1 == 2u) || (m_Condition2 == 2u) || (m_Condition3 == 2u))
{
u8Result = 1u;
}
else if ((m_Condition1 == 14u) || (m_Condition2 == 14u) || (m_Condition3 == 14u))
{
u8Result = FLASH_SYNC_1Hz;
}
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_AEBS_OFF_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL03 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL03 = 0x00;
}
if (led_status == 1)
{
SEG_LED_AEBS_OFF_L(7);
}
else
{
SEG_LED_AEBS_OFF_L(0);
}
}
/******************************************************************************
L4 LDWS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_LDWS_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t CanStatus1 = 0u;
uint8_t CanStatus2 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FE5BE8_Sig_Lane_Departure_Warning_Sys_Sta();
m_Condition2 = (uint8_t)Get_ID_18FECAE8_Sig_Amber_Warning_Lamp_Status();
CanStatus1 = CAN_MSG_Status(ID_CanMsg18FE5BE8_Msg_Count);
CanStatus2 = CAN_MSG_Status(ID_CanMsg18FECAE8_Msg_Count);
if (K_Line_Set.K_Line_LID27 == 0x01u)
{
/*LDWS与FCW同时掉线闪烁*/
if ((CanStatus1 == CAN_SIG_LOST) && (CanStatus2 == CAN_SIG_LOST))
{
u8Result = FLASH_SYNC_1Hz;
}
else if ((m_Condition1 == 0x02u) || (m_Condition2 == 0x01u))
{
u8Result = 1u;
}
else if ((m_Condition1 == 0x00u) || (m_Condition1 == 0x05u) || (m_Condition1 == 0x0Eu))
{
u8Result = FLASH_SYNC_1Hz;
}
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_LDWS_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL04 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL04 = 0x00;
}
if (led_status == 1)
{
SEG_LED_LDWS_L(7);
}
else
{
SEG_LED_LDWS_L(0);
}
}
/******************************************************************************
L5 SRS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_SRS_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_SRS_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL20 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL20 = 0x00;
}
if (led_status == 1)
{
SEG_LED_SRS_L(7);
}
else
{
SEG_LED_SRS_L(0);
}
}
/******************************************************************************
L6 ENG OIL
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_ENG_OIL_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ENG_OIL);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_ENG_OIL_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL21 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL21 = 0x00;
}
if (led_status == 1)
{
SEG_LED_ENG_OIL_L(7);
}
else
{
SEG_LED_ENG_OIL_L(0);
}
}
/******************************************************************************
L7 CHARG
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_CHARG_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_CHARGE);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_CHARG_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL22 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL22 = 0x00;
}
if (led_status == 1)
{
SEG_LED_CHARG_L(7);
}
else
{
SEG_LED_CHARG_L(0);
}
}
/******************************************************************************
L8 SEAT BELT
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_SEAT_BELT_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_SEAT_BELT);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_SEAT_BELT_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL23 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL23 = 0x00;
}
if (led_status == 1)
{
SEG_LED_SEAT_BELT_L(7);
}
else
{
SEG_LED_SEAT_BELT_L(0);
}
}
/******************************************************************************
L9 RR DIFF LOCK
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_RR_DIFF_LOCK_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_RR_DIFF_LOCK);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_RR_DIFF_LOCK_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL16 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL16 = 0x00;
}
if (led_status == 1)
{
SEG_LED_RR_DIFF_LOCK_L(7);
}
else
{
SEG_LED_RR_DIFF_LOCK_L(0);
}
}
/******************************************************************************
L10 TPMS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_TPMS_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
uint8_t m_Condition4 = 0u;
uint8_t m_Condition5 = 0u;
m_Condition1 = (uint8_t)Get_ID_18011733_Sig_Low_Presure_Alarm();
m_Condition2 = (uint8_t)Get_ID_18011733_Sig_High_Presure_Alarm();
m_Condition3 = (uint8_t)Get_ID_18011733_Sig_High_Temperature_Alarm();
m_Condition4 = (uint8_t)Get_ID_18011733_Sig_No_signal_Alarm();
m_Condition5 = (uint8_t)Get_ID_18011733_Sig_Sensor_fault_information();
if ((m_Condition1 == 1u) || (m_Condition2 == 1u) || (m_Condition3 == 1u))
{
u8Result = 1u;
}
else if ((m_Condition4 == 1u) || (m_Condition5 == 7u) || (m_Condition5 == 8u) || (m_Condition5 == 9u))
{
u8Result = FLASH_SYNC_1Hz;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_TPMS_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL17 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL17 = 0x00;
}
if (led_status == 1)
{
SEG_LED_TPMS_L(7);
}
else
{
SEG_LED_TPMS_L(0);
}
}
/******************************************************************************
L11 ASR/EVSC OFF
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_ASR_or_EVSC_OFF_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18F0010B_Sig_ASR_Offroad_Switch();
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_ASR_or_EVSC_OFF_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL18 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL18 = 0x00;
}
if (led_status == 1)
{
SEG_LED_ASR_or_EVSC_OFF_L(7);
}
else
{
SEG_LED_ASR_or_EVSC_OFF_L(0);
}
}
/******************************************************************************
L12 EVSC
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_EVSC_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
uint8_t m_Condition4 = 0u;
uint8_t m_Condition5 = 0u;
uint8_t m_Condition6 = 0u;
uint8_t m_Condition7 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_BRAKE_AIR_EBS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Red_Warning_Lamp_State();
m_Condition3 = (uint8_t)Get_ID_18F0010B_Sig_ATC_or_ASR_Lamp_State();
m_Condition4 = (uint8_t)Get_ID_18FE4F0B_Sig_VDC_Lamp_State();
m_Condition5 = (uint8_t)Get_ID_18FE4F0B_Sig_VDC_Fully_operational();
//m_Condition6 = (uint8_t)Get_ID_18FE4F0B_Sig_VDC_Lamp_State();
//m_Condition7 = (uint8_t)Get_ID_18F0010B_Sig_ASR_Offroad_Switch();
if ((m_Condition1 == 1u) || (m_Condition2 == 1u))
{
u8Result = 1u;
}
else if (m_Condition3 == 1u)
{
u8Result = FLASH_SYNC_5Hz;
}
else if (m_Condition4 == 1u)
{
u8Result = FLASH_SYNC_2Hz;
}
else if (m_Condition5 == 1u)
{
u8Result = FLASH_SYNC_1Hz;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_EVSC_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL19 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL19 = 0x00;
}
if (led_status == 1)
{
SEG_LED_EVSC_L(7);
}
else
{
SEG_LED_EVSC_L(0);
}
}
/******************************************************************************
L13 ECO STOP OFF
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_eco_stop_OFF_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_eco_stop_OFF_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL12 = LED_BRIGHTNESS; // 绿灯 亮
IS31_CHIP0_CHANNEL13 = 0x00; // 黄灯 灭
}
else if (led_status == 2)
{
IS31_CHIP0_CHANNEL12 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL13 = LED_BRIGHTNESS; // 黄灯 亮
}
else
{
IS31_CHIP0_CHANNEL12 = 0x00; // 绿灯 灭
IS31_CHIP0_CHANNEL13 = 0x00; // 黄灯 灭
}
if ((led_status == 1) || (led_status == 2))
{
SEG_LED_eco_stop_OFF_L(7);
}
else
{
SEG_LED_eco_stop_OFF_L(0);
}
}
/******************************************************************************
L14 AMT
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_AMT_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
uint8_t m_Condition4 = 0u;
uint8_t m_Condition5 = 0u;
uint8_t m_Condition6 = 0u;
m_Condition1 = (uint8_t)Get_ID_18FECA03_Sig_Amber_Warning_Lamp_Status();
m_Condition2 = (uint8_t)Get_ID_18FECA03_Sig_Malfunction_indicator_Lamp();
m_Condition3 = (uint8_t)Get_ID_18EBFF03_Sig_Amber_Warning_Lamp_Status();
m_Condition4 = (uint8_t)Get_ID_18EBFF03_Sig_Malfunction_indicator_Lamp();
m_Condition5 = (uint8_t)Get_ID_18ECFF03_Sig_Amber_Warning_Lamp_Status();
m_Condition6 = (uint8_t)Get_ID_18ECFF03_Sig_Malfunction_indicator_Lamp();
if ((m_Condition1 == 1u) || (m_Condition2 == 1u) || (m_Condition3 == 1u) ||
(m_Condition4 == 1u) || (m_Condition5 == 1u) || (m_Condition6 == 1u))
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_AMT_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL14 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL14 = 0x00;
}
if (led_status == 1)
{
SEG_LED_AMT_L(7);
}
else
{
SEG_LED_AMT_L(0);
}
}
/******************************************************************************
L15 WEAR IND
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_WEAR_IND_L_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_WEAR_IND);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_WEAR_IND_L_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL15 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL15 = 0x00;
}
if (led_status == 1)
{
SEG_LED_WEAR_IND_L(7);
}
else
{
SEG_LED_WEAR_IND_L(0);
}
}
/******************************************************************************
R1 PARK BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_PARK_BRAKE_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_PARK_BRAKE);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_PARK_BRAKE_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL08 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL08 = 0x00;
}
if (led_status == 1)
{
SEG_LED_PARK_BRAKE_R(7);
}
else
{
SEG_LED_PARK_BRAKE_R(0);
}
}
/******************************************************************************
R2 BRAKE AIR/EBS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BRAKE_AIR_or_EBS_RED_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
uint8_t m_Condition3 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_BRAKE_AIR_EBS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_ABS_Fully_Operational();
m_Condition3 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Red_Warning_Lamp_State();
if ((m_Condition1 == 1u) || (m_Condition2 == 0u) || (m_Condition3 == 1u))
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_BRAKE_AIR_or_EBS_RED_R_Execution(uint8_t led_status)
{
BRAKE_AIR_EBS_LED_MCU = led_status;
if (led_status == 1)
{
SEG_LED_BRAKE_AIR_or_EBS_RED_R(7);
}
else
{
SEG_LED_BRAKE_AIR_or_EBS_RED_R(0);
}
}
/******************************************************************************
R3 BRAKE LOCK
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BRAKE_LOCK_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_BRAKE_LOCK_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL07 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL07 = 0x00;
}
if (led_status == 1)
{
SEG_LED_BRAKE_LOCK_R(7);
}
else
{
SEG_LED_BRAKE_LOCK_R(0);
}
}
/******************************************************************************
R4 AIR SUS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_AIR_SUS_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_AIR_SUS);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_AIR_SUS_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL06 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL06 = 0x00;
}
if (led_status == 1)
{
SEG_LED_AIR_SUS_R(7);
}
else
{
SEG_LED_AIR_SUS_R(0);
}
}
/******************************************************************************
R5 TRAILER BRAKE
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_TRAILER_BRAKE_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_TRAILER_BRAKE);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_TRAILER_BRAKE_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL10 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL10 = 0x00;
}
if (led_status == 1)
{
SEG_LED_TRAILER_BRAKE_R(7);
}
else
{
SEG_LED_TRAILER_BRAKE_R(0);
}
}
/******************************************************************************
R6 BRAKE AIR/EBS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_BRAKE_AIR_or_EBS_YELLOW_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Amber_Warning_State();
if (m_Condition1 == 1u)
{
u8Result = 0u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_BRAKE_AIR_or_EBS_YELLOW_R_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL09 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL09 = 0x00;
}
if (led_status == 1)
{
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(7);
}
else
{
SEG_LED_BRAKE_AIR_or_EBS_YELLOW_R(0);
}
}
/******************************************************************************
R7 ACC AIR
信号接口：
信号定义：
输出信号： R6_LED_OUT
******************************************************************************/
uint8_t LED_ACC_AIR_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ACC_AIR);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_ACC_AIR_R_Execution(uint8_t led_status)
{
R6_LED_OUT = led_status;
if (led_status == 1)
{
SEG_LED_ACC_AIR_R(7);
}
else
{
SEG_LED_ACC_AIR_R(0);
}
}
/******************************************************************************
R8 ABS
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_ABS_R_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
uint8_t m_Condition2 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_ABS);
m_Condition2 = (uint8_t)Get_ID_18F0010B_Sig_EBS_Amber_Warning_State();
if ((m_Condition1 == 1u) || (m_Condition2 == 1u))
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_ABS_R_Execution(uint8_t led_status)
{
ABS_LED_MCU_OUT = led_status;
if (led_status == 1)
{
SEG_LED_ABS_R(7);
}
else
{
SEG_LED_ABS_R(0);
}
}
/******************************************************************************
U2 TRAILER ABS
信号接口：
信号定义：
输出信号：U2_LED_OUT
******************************************************************************/
uint8_t LED_TRAILER_ABS_U_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_TRAILER_ABS);
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_TRAILER_ABS_U_Execution(uint8_t led_status)
{
//U2_LED_OUT = led_status;
if (led_status == 1)
{
SEG_LED_TRAILER_ABS_U(7);
}
else
{
SEG_LED_TRAILER_ABS_U(0);
}
}
/******************************************************************************
U3 WORKING LAMP
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_WORKING_LAMP_U_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)XXXX;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_WORKING_LAMP_U_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL11 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL11 = 0x00;
}
if (led_status == 1)
{
SEG_LED_WORKING_LAMP_U(7);
}
else
{
SEG_LED_WORKING_LAMP_U(0);
}
}
/******************************************************************************
U6 TRAILE ABS INFO
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_TRAILER_ABS_INFO_U_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
m_Condition1 = (uint8_t)Line_In_Get_Status(LINE_IN_TRAILER_ABS_INFO);
if (m_Condition1 == 0x01u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_TRAILER_ABS_INFO_U_Execution(uint8_t led_status)
{
if (led_status == 1)
{
IS31_CHIP0_CHANNEL05 = LED_BRIGHTNESS;
}
else
{
IS31_CHIP0_CHANNEL05 = 0x00;
}
if (led_status == 1)
{
SEG_LED_TRAILER_ABS_INFO_U(7);
}
else
{
SEG_LED_TRAILER_ABS_INFO_U(0);
}
}
/******************************************************************************
Temp
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_Temp_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_Temp_Execution(uint8_t led_status)
{
if (led_status == 1u)
{
//TimerB_PWM_Channel_Duty_Set(TIMERB_2_CH7 , testBG );//水温格白色
TEMP_R_LED_OUT = 1u ;/*水温红灯*/
Water_Temp_Led_R_MCU_OUT = 1u;
TEMP_W_LED_OUT = 0u ;//水温字符白色指示灯
Water_Temp_Led_W_MCU_OUT = 0u;
}
else
{
TEMP_R_LED_OUT = 0u ;/*水温红灯*/
Water_Temp_Led_R_MCU_OUT = 0u;
TEMP_W_LED_OUT = 1u ;//水温字符白色指示灯
Water_Temp_Led_W_MCU_OUT = 1u;
}
}
/******************************************************************************
Fuel
信号接口：
信号定义：
输出信号：
******************************************************************************/
uint8_t LED_Fuel_Judgement(void)
{
uint8_t u8Result = 0u;
uint8_t m_Condition1 = 0u;
//m_Condition1 = Fuel_Get_LowAlarm();
if (m_Condition1 == 1u)
{
u8Result = 1u;
}
else
{
u8Result = 0u;
}
return u8Result;
}
void LED_Fuel_Execution(uint8_t led_status)
{
if (led_status == 1u)
{
FUEL_LED_Y_MCU = 1U ;
FUEL_W_LED_OUT = 0U ;
}
else
{
FUEL_LED_Y_MCU = 0U ;
FUEL_W_LED_OUT = 1U ;
}
}