✨ feat:修改串口发送胎压值为不变不发,

RT200T_2_ESP32/main/Protocol_User.c

@@ -332,8 +332,23 @@ void Uart_Send_Id12_Pro(void )//收到底板回复的0x20后,发送蓝牙类型
     Protocol_Send(0x12, ID12, 3);
 }
 
+// 函数定义  
+uint8_t arraysEqual(uint8_t arr1[], uint8_t arr2[], uint8_t size); 
+uint8_t arraysEqual(uint8_t arr1[], uint8_t arr2[], uint8_t size) 
+{  
+    for (uint8_t i = 0; i < size; i++) 
+    {  
+        if (arr1[i] != arr2[i]) 
+        {  
+            return 0; // 不相等，返回0（或false）  
+        }  
+    }  
+    return 1; // 相等，返回1（或true）  
+}
+
 extern uint8_t ID01[64];
 extern uint8_t ID01_Len;
+uint8_t ID01_Backup[64] = {0};
 void Uart_Send_Id01_Pro(void)
 {
      uint8_t i = 0;
@@ -363,18 +378,40 @@ void Uart_Send_Id01_Pro(void)
 
     //     //
     // }
-    if ((ID01[24] == 0x28)&&(ID01[25] == 0xA8))
+    
+    if(arraysEqual(ID01_Backup, ID01, 64) == 1)//相等
+    {
+        //printf("send 相等 \r\n");
+    }
+    else
     {
         Protocol_Send(0x01,ID01,ID01_Len);
+        memcpy(ID01_Backup, ID01, 64); 
     }
-}
 
+    
 
+    
+    
+    
+    
+}
+
+extern uint8_t Iphone_Num[20];
+extern uint8_t number_length;
 void Uart_Send_Id02_Pro(void)
 {
-    uint8_t ID02[1] = {0x00};
+    uint8_t ID02[22] = {0x00};
+    uint8_t i = 0;
     ID02[0] =  BT_User.Call_Sts;
-    Protocol_Send(0x02, ID02, 1);//给底板发送电话状态,用这个标志位显示电话号
+    ID02[1] =  number_length;
+    for ( i = 0; i < number_length; i++)
+    {
+       ID02[i+2] = Iphone_Num[i] - 0x30;
+    }
+    
+    Protocol_Send(0x02, ID02, number_length+2);//给底板发送电话状态,用这个标志位显示电话号
+    //printf("电话长度：%x \r\n",number_length);
 }