✨ feat:屏蔽printf

RT200T_2_ESP32/main/Protocol_User.c

@@ -221,7 +221,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)//esp接收底板
         if(Prot_User.State < Prot_Start)
         {
             Prot_User.State = Prot_Start;
-            printf("Prot_Start \r\n");
+            //printf("Prot_Start \r\n");
         }
     }
     else if(pData->CmdID == 0x03 )//收到底板发送的电话状态,来控制esp32蓝牙电话
@@ -231,7 +231,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)//esp接收底板
         {
             Prot_User.State = Prot_Normal;
 
-            printf("Prot_Normal \r\n");
+            //printf("Prot_Normal \r\n");
         }
 
         if(Prot_User.State >= Prot_Start)

RT200T_2_ESP32/main/app_BT_User.c

@@ -28,7 +28,7 @@ void BT_Connect_Event_Pro(void )
     BT_User.Call_Sts = Call_Idle;
     BT_User.ReconnTime = BT_ReConn_T - 500;
     BT_User.HF_Ctrl = HF_Idle;
-    printf("TB CONN\r\n");
+    //printf("TB CONN\r\n");
 }
 
 
@@ -38,7 +38,7 @@ void BT_DisConnect_Event_Pro(void )
     BT_User.Call_Sts = Call_Idle;
     BT_User.ReconnTime = BT_ReConn_T - 500;
     BT_User.HF_Ctrl = HF_Idle;
-    printf("TB DISCONN\r\n");
+    //printf("TB DISCONN\r\n");
 }
 
 void BT_User_Process(void )
@@ -88,13 +88,13 @@ void BT_User_Process(void )
         BT_User.ReconnTime++;
         if(BT_User.ReconnTime >= BT_ReConn_T)
         {
-            printf("Connect Start.................\n");
+            //printf("Connect Start.................\n");
             if(app_BT_Get_BondDev() == 1)
             {
                 esp_hf_client_connect(peer_addr);
             }
             
-            printf("Connect Over\n");
+            //printf("Connect Over\n");
 
             BT_User.ReconnTime = 0;
         }

RT200T_2_ESP32/main/bt_app_hf.c

@@ -339,12 +339,12 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
             {
                 BT_User.Call_Sts = Call_Idle;//电话空闲
 
-                printf("call idle\r\n");
+                //printf("call idle\r\n");
             }
             else if(param->call.status == 1)
             {
                 BT_User.Call_Sts = Call_InProcess;//正在接电话
-                printf("call Call_InProcess\r\n");
+                //printf("call Call_InProcess\r\n");
             }
             break;
         }
@@ -362,7 +362,7 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
                     {
                         BT_User.Call_Sts = Call_Idle;
 
-                        printf("call idle\r\n");
+                        //printf("call idle\r\n");
                     }
                     break;
                 }
@@ -370,19 +370,19 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
                 {
                     BT_User.Call_Sts = Call_IncomeCalling;
 
-                    printf("call income\r\n");
+                    //printf("call income\r\n");
                     break;
                 }
                 case 2:
                 {
                     BT_User.Call_Sts = Call_OutCalling;
-                    printf("call outcall\r\n");
+                    //printf("call outcall\r\n");
                     break;
                 }
                 case 3:
                 {
                     BT_User.Call_Sts = Call_OutCalling;
-                    printf("call outcall\r\n");
+                    //printf("call outcall\r\n");
                     break;
                 }
             }
@@ -517,42 +517,42 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
 
 HF_CMD_HANDLER(conn)
 {
-    printf("connect\n");
+    //printf("connect\n");
     esp_hf_client_connect(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(disc)
 {
-    printf("disconnect\n");
+    //printf("disconnect\n");
     esp_hf_client_disconnect(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(conn_audio)
 {
-    printf("connect audio\n");
+    //printf("connect audio\n");
     esp_hf_client_connect_audio(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(disc_audio)
 {
-    printf("disconnect audio\n");
+    //printf("disconnect audio\n");
     esp_hf_client_disconnect_audio(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(query_op)
 {
-    printf("Query operator\n");
+    //printf("Query operator\n");
     esp_hf_client_query_current_operator_name();
     return 0;
 }
 
 HF_CMD_HANDLER(answer)
 {
-    printf("Answer call\n");
+    //printf("Answer call\n");
     esp_hf_client_answer_call();
     return 0;
 }
@@ -560,21 +560,21 @@ HF_CMD_HANDLER(reject)
 {
     esp_err_t err;
     err = esp_hf_client_reject_call();
-    printf("Reject call err %d\n",err);
+    //printf("Reject call err %d\n",err);
     return 0;
 }
 
 const char test_dial_num[] = "17800536969";
 HF_CMD_HANDLER(dial)
 {
-    printf("Dial number %s\n", test_dial_num);
+    //printf("Dial number %s\n", test_dial_num);
     esp_hf_client_dial(test_dial_num);
     return 0;
 }
 
 HF_CMD_HANDLER(redial)
 {
-    printf("Dial number\n");
+    //printf("Dial number\n");
     esp_hf_client_dial(NULL);
     return 0;
 }
@@ -589,14 +589,14 @@ HF_CMD_HANDLER(dial_mem)
 
 HF_CMD_HANDLER(start_vr)
 {
-    printf("Start voice recognition\n");
+    //printf("Start voice recognition\n");
     esp_hf_client_start_voice_recognition();
     return 0;
 }
 
 HF_CMD_HANDLER(stop_vr)
 {
-    printf("Stop voice recognition\n");
+    //printf("Stop voice recognition\n");
     esp_hf_client_stop_voice_recognition();
     return 0;
 }
@@ -635,7 +635,7 @@ HF_CMD_HANDLER(btrh)
 {
     int btrh = ESP_HF_BTRH_CMD_HOLD;
 
-    printf("respond and hold command: %d\n", btrh);
+    //printf("respond and hold command: %d\n", btrh);
     esp_hf_client_send_btrh_cmd(btrh);
     return 0;
 }

RT200T_2_ESP32/main/gatts_table_creat_demo.c

@@ -515,7 +515,7 @@ int bsp_Ble_Gatts_Send_Indicate( uint8_t len, uint8_t *data)
 
             if(err != ESP_OK)
             {
-                printf("ble trans fail!!\r\n");
+                //printf("ble trans fail!!\r\n");
             }
 
         }
@@ -534,7 +534,7 @@ static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param
             if (adv_config_done == 0){
                 esp_ble_gap_start_advertising(&adv_params);
 
-                printf("adv 1\r\n");
+                //printf("adv 1\r\n");
             }
             break;
         case ESP_GAP_BLE_SCAN_RSP_DATA_RAW_SET_COMPLETE_EVT:
@@ -542,7 +542,7 @@ static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param
             if (adv_config_done == 0){
                 esp_ble_gap_start_advertising(&adv_params);
 
-                printf("adv 2\r\n");
+                //printf("adv 2\r\n");
             }
             break;
     #else
@@ -896,7 +896,7 @@ void Get_Mac_Init(void )
     esp_read_mac(ble_mac, ESP_MAC_BT);
 
 
-    sprintf(temp, "%02X%02X", ble_mac[4], ble_mac[5]);
+    //sprintf(temp, "%02X%02X", ble_mac[4], ble_mac[5]);
 
     raw_adv_data[sizeof(raw_adv_data) - 4] = temp[0];
     raw_adv_data[sizeof(raw_adv_data) - 3] = temp[1];
@@ -908,7 +908,7 @@ void Get_Mac_Init(void )
     // ESP_LOGW(GATTS_TABLE_TAG, "BLE_MAC IS %s : ",
     //                 temp);      
 
-    printf("My MAC:\n");
+    //printf("My MAC:\n");
     esp_log_buffer_hex(GATTS_TABLE_TAG, ble_mac, 6);          
 
     BT_Device_Name[sizeof(BT_Device_Name) - 11] = temp[0];
@@ -923,7 +923,7 @@ void Get_Mac_Init(void )
     raw_adv_data[15] = ble_mac[4];
     raw_adv_data[16] = ble_mac[5];
 
-    sprintf(temp1, "%02X%02X%02X%02X%02X%02X", ble_mac[0], ble_mac[1], ble_mac[2], ble_mac[3], ble_mac[4], ble_mac[5]);
+    //sprintf(temp1, "%02X%02X%02X%02X%02X%02X", ble_mac[0], ble_mac[1], ble_mac[2], ble_mac[3], ble_mac[4], ble_mac[5]);
 
 
     for(int i=0; i<12; i++)

RT200T_2_ESP32/main/main_user.c

@@ -161,7 +161,7 @@ void app_main(void)
     app_tpms_main();
     bsp_Uart_Init();
 
-    printf("KL30 INIT OVER~~~~~~\r\n");
+    //printf("KL30 INIT OVER~~~~~~\r\n");
     xTaskCreatePinnedToCore(Sys_Run_Tasks, "Sys_Run_Tasks", 4096, NULL, 3, Sys_Run_Taskshdl, 1);
     //xTaskCreatePinnedToCore(wifi_service_task, "wifi_service_task", 4096, NULL, 5, &wifi_service_hdl, 1); 
     //xTaskCreatePinnedToCore(Upgrade_BAT32A239_Task, "Upgrade_BAT32A239_Task", 1024 * 4, NULL, 5, NULL, 1);

RT200T_2_ESP32/main/simple_ota_example.c

@@ -130,16 +130,16 @@ void simple_ota_example_task(void *pvParameter)
     if (ret == ESP_OK) {
         ESP_LOGI(TAG, "OTA Succeed");
 
-        printf("\n");
-        printf("==========================================================\n");
+        //printf("\n");
+        //printf("==========================================================\n");
         for(i = 5; i > 0; i--)
         {
-            printf("============ System will restart in %d second. ============\n", i);
+            //printf("============ System will restart in %d second. ============\n", i);
             vTaskDelay(1000 / portTICK_PERIOD_MS);
         }
-        printf("============         System rebooting...      ============\n");
-        printf("==========================================================\n");
-        printf("\n");
+        //printf("============         System rebooting...      ============\n");
+        //printf("==========================================================\n");
+        //printf("\n");
 
         esp_restart();
     } else {
@@ -155,7 +155,7 @@ static void print_sha256(const uint8_t *image_hash, const char *label)
     char hash_print[HASH_LEN * 2 + 1];
     hash_print[HASH_LEN * 2] = 0;
     for (int i = 0; i < HASH_LEN; ++i) {
-        sprintf(&hash_print[i * 2], "%02x", image_hash[i]);
+        //sprintf(&hash_print[i * 2], "%02x", image_hash[i]);
     }
     ESP_LOGI(TAG, "%s %s", label, hash_print);
 }

RT200T_2_ESP32/source/wifi/softap.c

@@ -83,7 +83,7 @@ void softap_service_start(void)
     esp_wifi_get_mac(WIFI_IF_AP, softap_mac);
     // 将MAC地址后两个字节转为字符串
     char softap_temp[5];
-    sprintf(softap_temp, "%02X%02X", softap_mac[4], softap_mac[5]);
+    //sprintf(softap_temp, "%02X%02X", softap_mac[4], softap_mac[5]);
     // 将MAC地址拼接到 ESP_WIFI_SSID 后面
     char softap_ssid[32] = ESP_WIFI_SSID;
     strcat(softap_ssid, softap_temp);