重新调整CAN接收信号处理，没有内容，只有框架

Sources/Bzzer/gui_Bzzer.c

@@ -503,8 +503,8 @@ void  Gui_BeepPrioProc(_Beep *Bp)
                 
             }
             
-            //-- 手刹 --//
-            if(((g_LED.pParkTime > T_0_3s)||g_CanSwith.ParkLamp)&&(SetMeuMsg.Language==1))
+            //-- 驻车制动 手刹 --//
+            if((g_LED.pParkTime > T_0_3s)&&(SetMeuMsg.Language==1))
             {
                 Bp[17].Prio = ParkAlr;
                 Bp[17].OnTime = T1_500ms;

Sources/app_CAN.c

@@ -180,7 +180,7 @@ void App_CheckCanDrop(void)
 			{
 				g_CanSwith.WIF = 0;
 				g_CanSwith.DriverWarn = 0;
-				g_CanSwith.DriverLimited = 0;
+				//g_CanSwith.DriverLimited = 0;
 				Disable_signal(g_canClock.signal.Exist65279);
 			}
 		}
@@ -486,7 +486,7 @@ void App_CheckCanDrop(void)
 			}
 			if (g_canClock.ID65110_A3Cn == null)
 			{
-				g_canClock.ID65110Start_00Cn = 0;
+				g_canClock.ID65110Start_A3Cn = 0;
 				g_adblueMeter.CurBoardVal = 0;
 				g_adblueMeter.DispPosition = 0;
 				g_adblueMeter.CurPosition = 0;

api_Sources/api_RTC.c

@@ -469,7 +469,7 @@ void Api_ClockGenerate(void)
             }
 
             //----------------- KL15硬线灯去抖 ------------------------------------------------//
-            //手刹
+            //驻车制动
             if (LINE_IN_PARKING == LOW)
             {
                 if (g_LED.pParkTime < T_0_5s)
@@ -481,6 +481,7 @@ void Api_ClockGenerate(void)
             {
                 g_LED.pParkTime = null;
             }
+            
             /*
             //EBD-pin5  
             if(pBrakeIn == LOW)

app_Headers/g_Var.h

@@ -111,7 +111,7 @@ EXTERN_VAR volatile INT8U bSafeBeltLed;
 EXTERN_VAR volatile INT8U bPasBeltLed;
 
 //--can--//
-EXTERN_VAR volatile _LightSts g_LightSts;//左右转向专用
+EXTERN_VAR volatile _LightSts g_LightSts; //左右转向专用
 EXTERN_VAR volatile _CanSwith g_CanSwith;
 EXTERN_VAR volatile _CanClock g_canClock;
 EXTERN_VAR volatile INT8U g_CanTimeOut20ms;
@@ -128,7 +128,6 @@ EXTERN_VAR volatile _RevCanMsg g_canMsg65279; //
 EXTERN_VAR volatile _RevCanMsg g_canMsg65252; //预热               0x18FEE400
 EXTERN_VAR volatile _RevCanMsg g_canMsg64892; //DPF                0x18FD7C00
 EXTERN_VAR volatile _RevCanMsg g_canMsg65265; //定速巡航           0x18FEF100
-//EXTERN_VAR  volatile    _RevCanMsg              g_canMsg65265BCM; //手刹             0x18FEF121
 EXTERN_VAR volatile _RevCanMsg g_canMsg65263; //机油压力           0x18FEEF00
 EXTERN_VAR volatile _RevCanMsg g_canMsg65248; //                     0x18FEE000
 EXTERN_VAR volatile _RevCanMsg g_canMsg61442; //                        0x0CF00203

app_Headers/g_VarType.h

@@ -156,8 +156,8 @@ typedef struct
 
 	INT8U DPF_Red : 1;
 	INT8U ECO : 1;
-	INT8U DriverLimited : 3; //驾驶性能限制
 	INT8U CanPowerOver : 1;
+		INT8U Reserve1 : 3; 
 
 	INT8U EngFailure4 : 1;	 //EPC1
 	INT8U Hazard_Lights : 1; //危险灯

app_Sources/app_System.c

@@ -24,18 +24,15 @@ void App_Paramer_Init(void)
     INT8U i;
 
     //-- 主界面初始化 --//
-    if((ConfigItem.GasConfig == 1) && 
-      ((ConfigItem.AdblueConfig == 2) || (ConfigItem.AdblueConfig == 3)))
+    if((ConfigItem.GasConfig == 1) && ((ConfigItem.AdblueConfig == 0) || (ConfigItem.AdblueConfig == 1)))
     {
         g_Style = 1;//气压 + adblue
     }
-    else if((ConfigItem.GasConfig == 0) &&
-           ((ConfigItem.AdblueConfig == 2) || (ConfigItem.AdblueConfig == 3)))
+    else if((ConfigItem.GasConfig == 0) &&((ConfigItem.AdblueConfig == 0) || (ConfigItem.AdblueConfig == 1)))
     {
         g_Style = 2;//adblue
     }
-    else if((ConfigItem.GasConfig == 1) && 
-            ((ConfigItem.AdblueConfig == 0) || (ConfigItem.AdblueConfig == 1)))
+    else if((ConfigItem.GasConfig == 1) && ((ConfigItem.AdblueConfig != 0 ) && (ConfigItem.AdblueConfig != 1)))
     {
         g_Style = 3;//气压
     }
@@ -357,7 +354,7 @@ void App_State_OFF(void)
     
     //-- Can Clear All --//
     g_CanSwith.CabLock          = 0;
-    g_CanSwith.ParkLamp         = 0;
+    
     g_CanSwith.VacuumCylinder   = 0;   
     g_CanSwith.OilLamp          = 0;
     g_CanSwith.ExhaustBrake     = 0;
@@ -387,7 +384,6 @@ void App_State_OFF(void)
     g_CanSwith.VDCLampStatus    = 0;
     g_CanSwith.WIF              = 0; 
     g_CanSwith.DriverWarn       = 0;  
-    g_CanSwith.DriverLimited    = 0;
     g_CanSwith.ParkErr          = 0;
     g_CanSwith.AutoHoldAct      = 0;
     g_CanSwith.AutoHoldWork     = 0;     

gui_Sources/gui_Adblue.c

@@ -171,7 +171,7 @@ void Gui_Adblue_Disp_Manage(void)
     if(g_sysFlag.Bits.AdbuleMeterInit == Disable)
     {
         //超时维持
-        if(ConfigItem.AdblueConfig == 2)
+        if(ConfigItem.AdblueConfig == 0)                         //13%
         {
             if(g_canClock.signal.Exist65110_00)
             {
@@ -185,9 +185,9 @@ void Gui_Adblue_Disp_Manage(void)
                }
             }
         } 
-        else if(ConfigItem.AdblueConfig == 3)
+        else if(ConfigItem.AdblueConfig == 1)                   //15%
         {
-            if(g_canClock.signal.Exist65110_3D)
+            if(g_canClock.signal.Exist65110_A3)
             {
                if(g_adblueMeter.CurPosition <= 43) //        2021-04-12      (10%)36改(12%)43
                {

gui_Sources/gui_Led.c

@@ -110,6 +110,25 @@ void Gui_KL15LedDisplay(void)
 
 	//--------5912驱动指示灯
 	//BD8379_D0  2 驻车制动
+	if (DIDFlag.Bits.DID1009Valid == Enable)
+	{
+		if (IOCTL_DID1009.FF_Byte == 1)
+		{
+			BD83790A |= BD8379_D0; //on
+		}
+		else
+		{
+			BD83790A &= ~BD8379_D0; //off
+		}
+	}
+	else
+	{
+		if ((g_LED.CheckLightsTime < T_CheckTime) && (g_revMeter.CurBoardVal < 300))
+		{
+			BD83790A |= BD8379_D0; //on
+		}
+		else
+		{
 			if ((LINE_IN_PARKING == 0u) && (g_LED.pParkTime >= T_0_3s))
 			{
 				BD83790A |= BD8379_D0; //on
@@ -118,6 +137,9 @@ void Gui_KL15LedDisplay(void)
 			{
 				BD83790A &= ~BD8379_D0; //off
 			}
+		}
+	}
+
 	//BD8379_D1 油含水  15 油水分离
 	if (Test_Hyq)
 	{
@@ -181,6 +203,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790A &= ~BD8379_D7; //off
 	}
+
 	//BD8379_D8 6 ABS故障
 	if (DIDFlag.Bits.DID1011Valid == Enable)
 	{
@@ -197,33 +220,17 @@ void Gui_KL15LedDisplay(void)
 	{
 		if ((g_LED.CheckLightsTime < T_CheckTime) && (g_revMeter.CurBoardVal < 300))
 		{
-			if ((ConfigItem.ABS_ESCConfig == 0) || (ConfigItem.ABS_ESCConfig == 1))
+			if ((ConfigItem.ABS_ESCConfig == 0) || (ConfigItem.ABS_ESCConfig == 1) || (ConfigItem.ABS_ESCConfig == 2))
 			{
 				BD83790A |= BD8379_D8; //on
 			}
 		}
 		else
 		{
-			if (ConfigItem.ABS_ESCConfig == 0)
-			{
-				//硬线(+..)
-				if (g_LED.ABSFaultTimes > T_0_1s)
-				{
-					BD83790A &= ~BD8379_D8; //off
-					bDSTable[PicABS] = 0;
-					DTC_ABSErrFlag = Disable;
-				}
-				else
-				{
-					BD83790A |= BD8379_D8; //on
-					bDSTable[PicABS] |= DS0_MASK;
-					DTC_ABSErrFlag = Enable;
-				}
-			}
-			else if (ConfigItem.ABS_ESCConfig == 1)
+			if ((ConfigItem.ABS_ESCConfig == 0) || (ConfigItem.ABS_ESCConfig == 1) || (ConfigItem.ABS_ESCConfig == 2))
 			{
 				//can
-				if (g_CanSwith.ABSLamp)
+				if (g_CanSwith.ABSLamp == 1u)
 				{
 					BD83790A |= BD8379_D8; //on
 					bDSTable[PicABS] |= DS0_MASK;
@@ -242,14 +249,42 @@ void Gui_KL15LedDisplay(void)
 			}
 		}
 	}
+
 	//BD8379_D9 制动器故障 4 制动气压不足/制动系统故障
-	if (Test_Hyq)
+	if (DIDFlag.Bits.DID1030Valid == Enable)
+	{
+		if (IOCTL_DID1030.FF_Byte == 1)
+		{
+			BD83790A |= BD8379_D9; //on
+		}
+		else
+		{
+			BD83790A &= ~BD8379_D9; //off
+		}
+	}
+	else
+	{
+		if ((g_LED.CheckLightsTime < T_CheckTime) && (g_revMeter.CurBoardVal < 300))
+		{
+			if (ConfigItem.GasConfig == 1)
 			{
 				BD83790A |= BD8379_D9; //on
 			}
+		}
+		else
+		{
+			if ((g_sysFlag.Bits.Gas2LedEn || g_sysFlag.Bits.Gas1LedEn) &&
+				(ConfigItem.GasConfig == 1))
+			{
+				BD83790A |= BD8379_D9; //on
+				bDSTable[PicGasLow] |= DS0_MASK;
+			}
 			else
 			{
 				BD83790A &= ~BD8379_D9; //off
+				bDSTable[PicGasLow] = 0;
+			}
+		}
 	}
 	//BD8379_D10 预留3
 	if (Test_Hyq)
@@ -271,14 +306,45 @@ void Gui_KL15LedDisplay(void)
 	}
 
 	//BD8379_D0 OBD 10 发动机排放故障
-	if (Test_Hyq)
+	if (DIDFlag.Bits.DID100DValid == Enable)
+	{
+		if (IOCTL_DID100D.FF_Byte == 1)
+		{
+			BD83790B |= BD8379_D0; //on
+		}
+		else
+		{
+			BD83790B &= ~BD8379_D0; //off
+		}
+	}
+	else
+	{
+		if (g_revMeter.CurBoardVal <= 300)
 		{
 			BD83790B |= BD8379_D0; //on
+			DTC_OBDErrFlag = Disable;
+		}
+		else if ((ConfigItem.EngConfig == 0) || (ConfigItem.EngConfig == 1))
+		{
+			//if ((g_LED.pMILOffTime1 >= T_2_0s) && (OBDLamp == 0))
+			if (g_LED.pMILOffTime1 >= T_2_0s)
+			{
+				BD83790B &= ~BD8379_D0; //off
+				DTC_OBDErrFlag = Disable;
+			}
+			else
+			{
+				BD83790B |= BD8379_D0; //on
+				DTC_OBDErrFlag = Enable;
+			}
 		}
 		else
 		{
 			BD83790B &= ~BD8379_D0; //off
+			DTC_OBDErrFlag = Disable;
 		}
+	}
+
 	//BD8379_D1  7 燃油报警
 	if (Test_Hyq)
 	{
@@ -306,6 +372,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D3; //off
 	}
+
 	//BD8379_D4 13 车厢举升报警
 	if (Test_Hyq)
 	{
@@ -315,6 +382,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D4; //off
 	}
+
 	//BD8379_D5 22 DPF禁止再生
 	if (Test_Hyq)
 	{
@@ -324,6 +392,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D5; //off
 	}
+
 	//BD8379_D6 11 发动机故障
 	if (Test_Hyq)
 	{
@@ -333,6 +402,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D6; //off
 	}
+
 	//BD8379_D7 机油报警  3  低油压报警
 	if (Test_Hyq)
 	{
@@ -342,6 +412,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D7; //off
 	}
+
 	//BD8379_D8 18 DPF再生（黄色）
 	if (Test_Hyq)
 	{
@@ -351,6 +422,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D8; //off
 	}
+
 	//BD8379_D9 21 DPF再生（红色）
 	if (Test_Hyq)
 	{
@@ -360,6 +432,7 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D9; //off
 	}
+
 	//BD8379_D10 12 制动蹄片磨损报警
 	if (Test_Hyq)
 	{
@@ -369,15 +442,8 @@ void Gui_KL15LedDisplay(void)
 	{
 		BD83790B &= ~BD8379_D10; //off
 	}
+
 	//BD8379_D11 门开 门开在30电上
-	if (Test_Hyq)
-	{
-		BD83790B |= BD8379_D11; //on
-	}
-	else
-	{
-		BD83790B &= ~BD8379_D11; //off
-	}
 }
 /*-------------------------------------------------------------------------
  * Function Name  : Gui_KL30LedDisplay
@@ -560,9 +626,22 @@ void Gui_KL30LedDisplay(void)
 	}
 
 	//16 门开-LED
+	if (DIDFlag.Bits.DID1007Valid == Enable)
+	{
+		if (IOCTL_DID1007.FF_Byte == 1)
+		{
+			BD83790B |= BD8379_D11; //on
+		}
+		else
+		{
+			BD83790B &= ~BD8379_D11; //off
+		}
+	}
+	else
+	{
 		if (g_canClock.signal.Exist60439)
 		{
-		if (g_CanSwith.DrDoorStae || g_CanSwith.PssDoorStae || g_CanSwith.RLDoorStae || g_CanSwith.RRDoorStae)
+			if ((g_CanSwith.DrDoorStae == 1u) || (g_CanSwith.PssDoorStae == 1u) || (g_CanSwith.RLDoorStae == 1u) || (g_CanSwith.RRDoorStae == 1u))
 			{
 				BD83790B |= BD8379_D11; //on
 			}
@@ -582,4 +661,55 @@ void Gui_KL30LedDisplay(void)
 				BD83790B &= ~BD8379_D11; //off
 			}
 		}
+	}
+
+	//------------------------ Door Signl KL30 Receive ----------------------//
+	//can信号不存在时,检测硬线信号
+	if (!g_canClock.signal.Exist60439)
+	{
+		if (g_LED.pDoorOpenTime >= T_0_3s)
+		{
+			g_CanSwith.DrDoorStae = 1;
+			g_CanSwith.PssDoorStae = 1;
+		}
+		else
+		{
+			g_CanSwith.DrDoorStae = 0;
+			g_CanSwith.PssDoorStae = 0;
+		}
+	}
+
+	//车门状态
+	if ((g_CanSwith.DrDoorStae) || (g_CanSwith.PssDoorStae) || (g_CanSwith.RLDoorStae) || (g_CanSwith.RRDoorStae))
+	{
+		bDSTable[PicDoorOpen] |= DS0_MASK;
+
+		//如果车门的状态发生改变，且已经添加到lcdque里
+		if ((((g_CanSwith.OldDrDoorStae != g_CanSwith.DrDoorStae)) ||
+			 ((g_CanSwith.OldPssDoorStae != g_CanSwith.PssDoorStae)) ||
+			 ((g_CanSwith.OldRLDoorStae != g_CanSwith.RLDoorStae)) ||
+			 ((g_CanSwith.OldRRDoorStae != g_CanSwith.RRDoorStae))) &&
+			((bDSTable[PicDoorOpen] & LCD_MASK) == LCD_MASK))
+		{
+			//车门状态发生改变,更新一次显示
+			if (((wDS_LcdQueue[bCurDsPos]) == (PicDoorOpen)) && ((bDSTable[PicDoorOpen] & DS0_MASK) == 1))
+			{
+				bDSUpdateFlag = 1;
+			}
+
+			//清除lcdque,重新加入队列
+			bDSTable[PicDoorOpen] &= (~LCD_MASK);
+			if (bLcdDsCnt >= 1)
+				bLcdDsCnt--;
+		}
+	}
+	else
+	{
+		bDSTable[PicDoorOpen] = 0;
+	}
+
+	g_CanSwith.OldDrDoorStae = g_CanSwith.DrDoorStae;	//主
+	g_CanSwith.OldPssDoorStae = g_CanSwith.PssDoorStae; //副
+	g_CanSwith.OldRLDoorStae = g_CanSwith.RLDoorStae;	//左后
+	g_CanSwith.OldRRDoorStae = g_CanSwith.RRDoorStae;	//右后
 }