🎉 init:整理燃油相关，初步测试无问题

HJ232_Source/source/Application/APPCan/CAN_User.c

@@ -139,10 +139,10 @@ void Can_Set_Buff_510(uint8_t CopyData[])
 
 
 
-    temp16 = FuelR/10;
-    if(FuelR>3100){
-        temp16 = 320;
-    }
+    //temp16 = FuelR/10;
+    //if(FuelR>3100){
+    //    temp16 = 320;
+    //}
     CopyData[2] = (temp16>>8)&0xff;
     CopyData[3] = temp16&0xff;
 

HJ232_Source/source/Application/Fuel/Fuel.h

 #ifndef FUEL_H
 #define FUEL_H
 
-typedef enum{
+#include "common.h"
+
+#define Fuel_Short_Value 0           /* 燃油短路值 精度0.1ohm */
+#define Fuel_Open_Value 1100         /* 燃油开路值 精度0.1ohm */
+#define Fuet_Short_Dealy_Timer 3000  /* 燃油从正常进入短路的延迟时间  单位ms*/
+#define Fuel_Open_Dealy_Timer 3000   /* 燃油从正常进入开路的延迟时间 单位ms*/
+#define Fuel_Normal_Dealy_Timer 3000 /* 燃油从异常状态进入正常的延迟时间 单位ms*/
+#define FUEL_DATA_TIME 25u           /*这里填写多长时间采集一个数据，单位ms*/
+#define FUEL_DATA_NUM 20u            /*燃油电阻采集数据总数 最大255*/
+#define FUEL_CAL_START 5u            /*数据排序后取中间部分计算平均：起始*/
+#define FUEL_CAL_END 15u             /*数据排序后取中间部分计算平均：结束*/
+#define RETURN_DIFFERENCE 25u        /*判断上升或下降的回差，精度0.1*/
+#define Creep_Down_Up_Timer 10000    /* 一个格的时间 单位ms */
+typedef enum
+{
+    Up_Dir = 0,
+    Down_Dir = 1,
+    Unvalid = 0XFF,
+} _FuelDir;
+
+typedef enum
+{
     FuelSensorNormal = 0,
     FuelSensorShortCircuit,
     FuelSensorOpenCircuit,
-}FuelSensorSts_t;
-    
+} FuelSensorSts_t;
+
+typedef struct
+{
+    uint8_t u8FuelDataCount;                /* 燃油采集计数 */
+    uint8_t u8FuelCollectCount;             /* 多久采集一次燃油数据 */
+    uint16_t FuelDataBuffer[FUEL_DATA_NUM]; /* 存储燃油数据buffer */
+    uint8_t u8FuelInitState;                /* 燃油传感器初始化状态 */
+    uint8_t u8FuelInitFlag;                 /* 燃油初始化标志 */
+    uint16_t FuelDataArray[7];              /* 数组下标0用于存储短路值，1~5用于存储当前对应格数阻值，6用于存储开路阻值 */
+    uint16_t Fuel_Res;                      /* 进行滤波处理后的燃油阻值 */
+    uint16_t Fuel_Res_Back;                 /* 历史燃油阻值 */
+    uint16_t u16SensorShortTimer;           /* 传感器进入短路时间 */
+    uint16_t u16SensorOpenTimer;            /* 传感器进入开路时间 */
+    uint16_t u16SensorNormalTimer;          /* 传感器进入正常时间 */
+    uint8_t u8FuelADCompleteFlg;            /* 一组数据采集完成标志 */
+    _FuelDir FuelDir;                       /* 燃油方向 */
+    FuelSensorSts_t FuelSensorState;        /* 燃油传感器状态 */
+
+} _FuelData;
+
+typedef struct
+{
+    uint8_t u8Curseg;       /* 当前格 */
+    uint8_t u8DestSeg;      /* 目标格 */
+    uint16_t u16Down_Timer; /* 上升延迟时间 */
+    uint16_t u16Up_Timer;   /* 下降延迟时间 */
+} _Fuel_Dis;
+
+extern _Fuel_Dis FuelDis;
+extern _FuelData Fuel_Data;
+
 extern void Fuel_KL15_Init(void);
 extern void Fuel_KL30_Init(void);
 extern void Fuel_Cal_Sevice(uint8_t deltaTime);
-extern uint8_t Get_Fuel_Disp_Byte(void);
 extern uint8_t Get_CurFuelSetp(void);
 extern FuelSensorSts_t Get_Fuel_Sensor_State(void);
+void Fuel_Res_Call(uint8_t deltaTime);
 
 #endif

HJ232_Source/source/System/tasks.c

@@ -91,6 +91,7 @@ void Sys_Run_Mode_10ms_Tasks(void)
 
 
     Data_Mileage_Write_EEPROM();
+    Fuel_Res_Call(10u);
 }
 /*============================================================================*/
 
@@ -147,7 +148,9 @@ void Sys_Run_Mode_100ms_Tasks_Group2(void)
 
 void Sys_Run_Mode_100ms_Tasks_Group3(void)
 {
-
+    Services_Mileage_Callback();
+    Data_Trip_Processing();
+    Data_ODO_Processing();
 }
 
 void Sys_Run_Mode_100ms_Tasks_Group4(void)
@@ -156,8 +159,14 @@ void Sys_Run_Mode_100ms_Tasks_Group4(void)
     RTC_Service();
 }
 
+uint32_t TRIPATEST = 0;
+uint32_t ODOTEST = 0;
+uint32_t MileageTest = 0;
 void Sys_Run_Mode_100ms_Tasks_Group5(void)
 {
+    TRIPATEST = Data_Read_Trip(EM_TRIP_A);
+    ODOTEST = Data_ODO_Read();
+    MileageTest = Data_Mileage_Read();
 
 }