✨ feat:其他项目板子BU98驱动调试完成，待新板子到后调试

HJ232_Source/source/Application/APPCan/CAN_User.c

@@ -18,6 +18,7 @@
 #include "Services_Mileage_User.h"
 #include "U2_app_Service.h"
 #include "System_Monitor.h"
+#include "Services_Mileage.h"
 
 #include "Flash_synchronizer.h"
 
@@ -373,7 +374,7 @@ SEND_FAULT_END:
     CopyData[6] = temp32>>8;
     CopyData[7] = temp32&0xff;
 }
-extern uint8_t ModfyODORemainTimes;
+/* extern uint8_t ModfyODORemainTimes; */
 void Can_Set_Buff_522(uint8_t CopyData[])
 {
     uint32_t temp32 = 0;
@@ -400,7 +401,7 @@ void Can_Set_Buff_522(uint8_t CopyData[])
      CopyData[3] <<= 4;
      CopyData[3] |= (temp32%10);     
 
-    CopyData[4] |= ModfyODORemainTimes&0x0f;
+  /*   CopyData[4] |= ModfyODORemainTimes&0x0f; */
      temp16 = Common_Get_Disp_V_Speed();
 		 if(temp16>1990)		temp16=1990;
      temp16 /= 10;    

HJ232_Source/source/Application/CalcFrequency/CalcFrequency_user.c

@@ -4,7 +4,7 @@
 #include "tim4.h"
 #include "MCU_Core_Protocol.h"
 #include "CAN_Communication_Matrix.h"
-#include "SEG_LCD.h"
+
 
 //static uint16_t VehSpeedBuf[3];
 //static uint8_t VehSpeedCount;

HJ232_Source/source/Application/DataProcessor/Services_Mileage_User.c

-
-
-#include "Services_Mileage_User.h"
-#include "Common_Interface.h"
-#include "eepromManage.h"
-#include "Menus.h"
-#include "CAN_Communication_Matrix.h"
-#include "wdt.h"
-uint32_t TotalODOTemp = 0;
-uint16_t ODORemainder = 0;
-Mileage_t   g_WriteMileage __attribute__ ((aligned (4)));
-Mileage_t   g_ReadMileage __attribute__ ((aligned (4)));
-uint8_t SaveODOValid = 0;
-uint16_t   odoVaild = 0;
-uint8_t ModfyODORemainTimes = 0;
-uint16_t ModfyODOTimeDelay_ms = 0;
-#define EEPROM_BLOCK_00 0   //用来储存总计清零次数
-#define EEPROM_BLOCK_01 16
-#define EEPROM_BLOCK_02 32
-#define EEPROM_BLOCK_03 48
-#define EEPROM_BLOCK_04 64
-#define EEPROM_BLOCK_05 80
-void Mileage_Delay_ms(uint32_t u32Ms)
-{
-    uint32_t  i, Counter;
-
-    for(Counter = 0; Counter < u32Ms; Counter++) {
-        for(i = 0; i < 44; i++) {
-            __NOP();
-            __NOP();
-            __NOP();
-        }
-        WDT_Restart();
-    }
-}
-void CalcODOKL30Init(void)
-{
-    odoVaild = eeprom_ReadODO(&g_ReadMileage);
-    if(g_ReadMileage.Odo>= g_WriteMileage.Odo)
-    {
-        g_WriteMileage.Odo = g_ReadMileage.Odo;
-    }
-    if(g_ReadMileage.Trip>= g_WriteMileage.Trip)
-    {
-        g_WriteMileage.Trip = g_ReadMileage.Trip;
-    }
-    if(g_ReadMileage.Trip1>= g_WriteMileage.Trip1)
-    {
-        g_WriteMileage.Trip1 = g_ReadMileage.Trip1;
-    }
-
-    eeprom_ReadRecord(EEPROM_BLOCK_00,(uint8_t*)&ModfyODORemainTimes,1);
-    if(ModfyODORemainTimes == 0xff){
-        ModfyODORemainTimes = 3;
-    }
-}
-void CalcODOKL15Init(void)
-{
-    SaveODOValid = 1;
-
-}
-void CalcODOIgnOffInit(void)
-{
-    SaveODOValid = 1;
-
-}
-//=======================================
-//+++++++50ms任务调度+++++++++++++++++
-//
-//根据车速计算里程数			
-//=======================================
-void CalcODO_50ms_Services(void)
-{
-  uint32_t mVspeed=0;
-  
-  if(Common_Get_IG_Sts() == COMMON_POWER_OFF){
-    return;
-  }
-  mVspeed = Common_Get_Act_V_Speed();
-  if(mVspeed > 3600){
-        mVspeed = 3600;
-  }
-
-  TotalODOTemp   +=   (mVspeed * 25) / 18;  //50ms cycle
-  /*取余数*/
-  ODORemainder += (mVspeed * 25) % 18; 
-  
-  if(ODORemainder >= 18 )
-  {
-      ODORemainder -= 18;
-      TotalODOTemp ++;
-  } 
-      
-    
-    if (TotalODOTemp > 10000) 
-    {
-        TotalODOTemp -= 10000;
-        g_WriteMileage.Odo += 10;
-        
-        if ((g_WriteMileage.Odo % 100) == 0) 
-        {
-            SaveODOValid = 1;
-        }
-
-        g_WriteMileage.Trip += 10;
-        g_WriteMileage.Trip1 += 10;
-        
-        if(Get_Unit_Setting() == Metric){
-            if (g_WriteMileage.Trip > 999999) {  //999km999m
-                g_WriteMileage.Trip = 0;
-            } 
-            if (g_WriteMileage.Trip1 > 999999) {  //999km999m
-                g_WriteMileage.Trip1 = 0;
-            } 
-        }        
-        if(Get_Unit_Setting() == Imperial){
-
-            if (g_WriteMileage.Trip > 1609343) {  //999mile999
-                g_WriteMileage.Trip = 0;
-            }       
-            if (g_WriteMileage.Trip1 > 1609343) {  //999mile999
-                g_WriteMileage.Trip1 = 0;
-            }               
-        }
-        if (g_WriteMileage.Odo > 1609343999) {  //999999mile
-            g_WriteMileage.Odo = 1609343999;
-        }        
-    }
-}
-void CalcODO_100ms_Services(void)
-{
-    uint8_t PwSts = 0;
-    uint32_t temp32 = 0;
-    static uint8_t clearEnFlag = 0;
-    static uint8_t TripClearCommandBak = 0;
-
-  if(odoVaild == 0)
-  {
-      /* qitiancun 防止上电读取失败 */
-      odoVaild = eeprom_ReadODO(&g_ReadMileage);
-      if(g_ReadMileage.Odo >= g_WriteMileage.Odo)
-      {
-          g_WriteMileage.Odo = g_ReadMileage.Odo;
-      }
-      if(g_ReadMileage.Trip>= g_WriteMileage.Trip)
-      {
-          g_WriteMileage.Trip = g_ReadMileage.Trip;
-      }
-      if(g_ReadMileage.Trip1>= g_WriteMileage.Trip1)
-      {
-          g_WriteMileage.Trip1 = g_ReadMileage.Trip1;
-      }
-  }
-
-    if (SaveODOValid) {
-        SaveODOValid = 0;
-
-        if(Common_Get_IG_Sts() == COMMON_POWER_ON) {
-            PwSts = 1;
-        }
-        else {
-            PwSts = 0;
-        }
-
-        eeprom_WriteODO( &g_WriteMileage , distance_100m , PwSts);
-    }
-
-    //厂家清大计，
-    //200km ODO以内，可以清除总里程，ODO可以改大，不能改小。
-    //两者共享次数为3次，仪表两次里程操作响应间隔时间为10s。触发后连发3次。
-    if(ModfyODOTimeDelay_ms >= 100){
-        ModfyODOTimeDelay_ms -= 100;
-    }    
-    else{
-        if(ModfyODORemainTimes){
-            //0x01= 清零总里程（小于200km）
-            if((Get_ID_55C_Sig_ModifyODOSts() == 1) && (g_WriteMileage.Odo) && (g_WriteMileage.Odo < 200000)){
-                ModfyODOTimeDelay_ms = 10000;
-                g_WriteMileage.Odo = 0u;
-                g_WriteMileage.Trip = 0;
-                g_WriteMileage.Trip1 = 0;
-                TotalODOTemp = 0;
-                ModfyODORemainTimes--;
-                eeprom_ClearOdoSection();
-                Mileage_Delay_ms(40);
-                eeprom_WriteRecord(EEPROM_BLOCK_00,(uint8_t*)&ModfyODORemainTimes,1);            
-            }
-
-            //0x02= 设置总里程（只能改大，改小不响应）
-            temp32 = Get_ID_55C_Sig_ModifyODOValue();
-            temp32 *= 100;
-            if((Get_ID_55C_Sig_ModifyODOSts() == 2) && (g_WriteMileage.Odo < temp32)){
-                ModfyODOTimeDelay_ms = 10000;
-                
-                g_WriteMileage.Trip = 0;
-                g_WriteMileage.Trip1 = 0;
-                TotalODOTemp = 0;
-                ModfyODORemainTimes--;
-                
-                for(uint32_t i=0; i<20; i++){
-                    if(temp32 > i*100){
-                        g_WriteMileage.Odo = temp32-((19-i)*100);
-                    }
-                    else{
-                        g_WriteMileage.Odo = 0;
-                    }
-                    eeprom_WriteODO( &g_WriteMileage , distance_100m , 1);
-                    Mileage_Delay_ms(20);
-                }
-                eeprom_WriteRecord(EEPROM_BLOCK_00,(uint8_t*)&ModfyODORemainTimes,1);
-            }            
-        }
-    }
-
-    //TBOX控制清小计
-    temp32 = Get_ID_55C_Sig_ClearTrip();
-
-    //一定要判断数据发生变化再清一次，避免频繁写EEPROM
-    if((temp32 == 0) || (temp32 != TripClearCommandBak)){
-        clearEnFlag = 1;
-    }
-
-    if(clearEnFlag){
-
-        if(temp32 == 0x01){    //清零TRIPA
-            Data_Clear_Trip ( EM_TRIP_A );
-            clearEnFlag = 0;
-        }
-        else if(temp32 == 0x02){   //清零TRIPB
-            Data_Clear_Trip ( EM_TRIP_B );
-            clearEnFlag = 0;
-        }
-        else if(temp32 == 0x03){   //全部清零
-            Data_Clear_Trip ( EM_TRIP_A );
-            Data_Clear_Trip ( EM_TRIP_B );
-            clearEnFlag = 0;
-        }
-    }
-    TripClearCommandBak = temp32;
-    
-}
-uint32_t Data_Read_Trip(DataTripEnum_t TripN)
-{
-    uint32_t temp32 = 0;
-    if(TripN == EM_TRIP_A){
-        temp32 = g_WriteMileage.Trip;
-    }
-    else if(TripN == EM_TRIP_B){
-        temp32 = g_WriteMileage.Trip1;
-    }
-    
-    return temp32;
-}
-
-uint32_t Data_ODO_Read ( void )
-{
-    return g_WriteMileage.Odo;
-}
-
-void Data_Clear_Trip ( DataTripEnum_t TripN )
-{
-    if(TripN == EM_TRIP_A){
-         g_WriteMileage.Trip = 0u;
-         g_WriteMileage.IsTripClear = 1;
-    }
-    else if(TripN == EM_TRIP_B){
-         g_WriteMileage.Trip1 = 0u;
-         g_WriteMileage.IsTrip1Clear = 1;
-    }
-    
-    SaveODOValid = 1;
-
-}
-void Data_Mileage_Clear(void)
-{
-    /*产线 清大计和flash校验使用*/
-    g_WriteMileage.Odo = 0u;
-    g_WriteMileage.Trip = 0;
-    g_WriteMileage.Trip1 = 0;
-    TotalODOTemp = 0;
-    ModfyODORemainTimes = 3;
-    eeprom_ClearOdoSection();
-    Mileage_Delay_ms(40);
-    eeprom_WriteRecord(EEPROM_BLOCK_00,(uint8_t*)&ModfyODORemainTimes,1);
-
-}
-

HJ232_Source/source/Application/DataProcessor/Services_Mileage_User.h

-#ifndef __SERVICE_MILEAGE_USER_H__
-#define __SERVICE_MILEAGE_USER_H__
-
-#include "common.h"
-
-typedef unsigned char    ee_uint8_t;
-typedef unsigned short   ee_uint16_t;
-typedef unsigned int     ee_uint32_t;
-
-typedef enum
-{
-    EM_TRIP_A,
-    EM_TRIP_B,
-    EM_TRIP_MAX,
-} DataTripEnum_t;
-
-void CalcODO_50ms_Services(void);
-void CalcODO_100ms_Services(void);
-void CalcODOKL30Init(void);
-void CalcODOKL15Init(void);
-void CalcODOIgnOffInit(void);
-uint32_t Data_ODO_Read ( void );
-uint32_t Data_Read_Trip(DataTripEnum_t TripN);
-void Data_Clear_Trip ( DataTripEnum_t TripN );
-void Data_Mileage_Clear(void);
-
-#endif
-

HJ232_Source/source/Application/Display/GUI_LCD_DIS/Gui_Lcd_Dis.h

+#ifndef GUI_LCD_DIS_H
+#define GUI_LCD_DIS_H
+
+
+
+
+
+
+
+
+
+
+
+
+
+#endif
\ No newline at end of file

HJ232_Source/source/Application/Display/SEG_LCD_DIS/Gui_Seg_Dis.c

+
+#include "Gui_Seg_Dis.h"

HJ232_Source/source/Application/Display/SEG_LCD_DIS/Gui_Seg_Dis.h

+#ifndef _GUI_SEG_DIS_H_
+#define _GUI_SEG_DIS_H_
+
+#include "BU98R10.h"
+
+
+#endif 

HJ232_Source/source/Application/Gauges/Gauges.h

 #ifndef _GAUGES_H_
 #define _GAUGES_H_
 
-#include "SEG_LCD.h"
+
 #include "Common_Interface.h"
 
 /******************************************************************************

HJ232_Source/source/Application/MCU_Core_Protocol/MCU_Core_Protocol.c

@@ -9,7 +9,7 @@
 #include "Data_Gear.h"
 #include "Menus.h"
 #include "BGLInterface.h"
-#include "SEG_LCD.h"
+
 #include "System_Monitor.h"
 #include "Gauges.h" 
 #include "CoolantTemp.h"
@@ -17,6 +17,7 @@
 #include "CAN_Communication_Matrix.h"
 #include "CAN_User.h"
 #include "Flash_synchronizer.h"
+#include "Services_Mileage.h"
 
 uint8_t PackageCnt;
 
@@ -328,139 +329,7 @@ static uint16_t SpeedStandTime = 0u;
 // 100ms
 void Drive_Info_Display_Update_Service(void)
 {
-    //rtc_counter_value_t RtcTime;
-    int16_t temp16 = 0;
-    uint64_t totaldisp = 0;
-    uint32_t faultcodedisp = 0;
-    uint32_t vehicle = 0;
-    uint8_t SpeedStand = 0;
-    static uint16_t Checktime = 0;
-    //里程\车速
-    if(Get_Disp_Mileage_Mode() == Mileage_Mode_Total)
-    {
-        totaldisp = Data_ODO_Read();
-        totaldisp /= 100;
-    }
-    else if(Get_Disp_Mileage_Mode() == Mileage_Mode_TripA)
-    {
-        totaldisp = Data_Read_Trip(EM_TRIP_A);
-        totaldisp /= 100;
-    }
-    else if(Get_Disp_Mileage_Mode() == Mileage_Mode_TripB)
-    {
-        totaldisp = Data_Read_Trip(EM_TRIP_B);
-        totaldisp /= 100;
-    }
-    vehicle = Common_Get_Disp_V_Speed();
-    
-    if(Get_Unit_Setting() == Imperial)
-    {
-        totaldisp = (totaldisp * 6213)/10000;
-        vehicle = (vehicle * 621)/1000;
-    }
-    else
-    {
-        if((Get_Disp_Mileage_Mode() == Mileage_Mode_TripA) && (totaldisp > 9999))
-        {
-            Data_Clear_Trip ( EM_TRIP_A );
-        }
-        else if((Get_Disp_Mileage_Mode() == Mileage_Mode_TripB) && (totaldisp > 9999))
-        {
-            Data_Clear_Trip ( EM_TRIP_B );
-        }
-    }
-    
-    if (Get_Disp_Mileage_Mode() == Mileage_Mode_FaultCode)
-    {
-        if (GetDtcAmnt() == 0)
-        {
-            Checktime = 0;
-            DtcDispNum = 0;
-            faultcodedisp = 0;
-        }
-        else
-        {
-            if(Common_GetIgnOnTime() < IGON_SelfcheckingTimer)
-            {
-                Checktime = 0;
-               DtcDispNum = 0;
-            }
-            
-            Checktime++;
-            faultcodedisp = GetDtcDispNum(DtcDispNum)>>16;
-            if (Checktime > 50)
-            {
-                Checktime = 0;
-                if ((DtcDispNum + 1) < GetDtcAmnt())
-                    DtcDispNum ++;
-                else
-                    DtcDispNum = 0;
-            }
-        }
-    }
-    else
-    {
-        Checktime = 0;
-        DtcDispNum = 0;
-    }
-
-    if (Common_Get_Disp_E_Speed() == 0)
-    {
-        if (SpeedStandTime < 10)
-            SpeedStandTime++;
-    }
-    else
-    {
-        SpeedStandTime = 0;
-    }
-    if (SpeedStandTime >= 10)
-        SpeedStand = 1;
-    else
-        SpeedStand = 0;
-
-    if (Common_Get_IG_Sts() == COMMON_POWER_ON)
-    {
-        if (Common_GetIgnOnTime() >= IGON_SelfcheckingTimer)
-        {
-            if (get_SEG_Check_Contrl() == 0)
-            {
-                // 档位显示
-                SEG_LCD_Gear_Display(1, get_ID_ISG_Power(), CAN_MSG_Status(ID_ISG_Count));
-
-                // 车速显示
-                SEG_LCD_Vehicle_Speed_Num_Display(1, Get_Unit_Setting(), vehicle / 10); // 1:mph default:km/h
-
-                // 转速显示
-                SEG_LCD_Engine_Speed_Seg_Display(1, Common_Get_Disp_E_Speed(), SpeedStand);
-
-                // 累计里程显示
-                if (BatteryErrFlg)
-                {
-                    SEG_LCD_BatteryErr_Display(1, Common_GetIgnOnTime());
-                }
-                else
-                {
-                    if (Get_Disp_Mileage_Mode() == Mileage_Mode_FaultCode)
-                    {
-                        SEG_LCD_FaultCode_Display(1, faultcodedisp);
-                    }
-                    else
-                    {
-                        SEG_LCD_ODO_Trip_Display(1, Get_Disp_Mileage_Mode(), Get_Unit_Setting(), totaldisp); // mode/unit/batt/totaldisp
-                    }
-                }
-                // 水温显示
-                SEG_Coolant_Temp_Display(1, Get_CoolantTemp_Disp_Byte());
 
-                // 燃油显示
-                SEG_Fuel_Level_Display(1, Get_Fuel_Disp_Byte());
-
-                // 蓄电池电压
-                SEG_LCD_Battery_Voltage_Display(1, get_Delay_ECU_Battery_Voltage(), CAN_MSG_Status(ID_ECU_Battery_Count));
-            }
-
-        }
-    }
 }
 
 static uint32_t Animat_GEAR = 0u;
@@ -473,142 +342,7 @@ static uint32_t Animat_Battery = 0u;
 //10ms
 void Selfcheck_Display_Update_Service(void)
 {
-    if (Common_Get_IG_Sts() == COMMON_POWER_ON)
-    {
-        if (Common_GetIgnOnTime() < IGON_SelfcheckingTimer)
-        {
-            // 100ms
-            if (Common_GetIgnOnTime() < 1600)
-            {
-                // 档位自检
-                SEG_LCD_Gear_Display(1, 0, 0);
-                Animat_GEAR = Common_GetIgnOnTime() / 10;
-                // 车速自检
-                SEG_LCD_Vehicle_Speed_Num_Display(1, 0, Animat_Vspeed * 10 / 75); // 1:mph default:km/h
-                Animat_Vspeed = Common_GetIgnOnTime();
-                // 转速自检12000
-                SEG_LCD_Engine_Speed_Seg_Selftest(Animat_Espeed * 8);
-                Animat_Espeed = Common_GetIgnOnTime();
-
-                // 里程自检
-                if ((Get_Disp_Mileage_Mode() != Mileage_Mode_TempErr) && ((!Get_ID_113_Tbatt()) || (get_ID_ISG_BATT() > 10)))
-                {
-                    SEG_LCD_ODO_Trip_FaultCode_Selftest(Animat_ODO / 15);
-                    Animat_ODO = Common_GetIgnOnTime() / 10;
-                }
-                else
-                {
-                    SEG_LCD_BatteryErr_Display(1, Common_GetIgnOnTime());
-                    BatteryErrFlg = 1;
-                }
-
-                // Animat_ODO+=10;
-                // 水温自检
-                SEG_Coolant_Temp_Display(1, Animat_Temp / 30);
-                Animat_Temp = Common_GetIgnOnTime() / 10;
-                // 燃油自检
-                SEG_Fuel_Level_Display(1, Animat_Fuel / 30);
-                Animat_Fuel = Common_GetIgnOnTime() / 10;
-                // 蓄电池电压自检
-                SEG_LCD_Battery_Voltage_Selftest(Animat_Battery / 15);
-                Animat_Battery = Common_GetIgnOnTime() / 10;
-            }
-            else
-            {
-                // 档位自检
-                SEG_LCD_Gear_Display(1, 0, 0);
-                if (Animat_GEAR)
-                    Animat_GEAR = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-                // 车速自检
-                SEG_LCD_Vehicle_Speed_Num_Display(1, 0, Animat_Vspeed * 10 / 75); // 1:mph default:km/h
-                if (Animat_Vspeed)
-                    Animat_Vspeed = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-                // 转速自检12000
-                SEG_LCD_Engine_Speed_Seg_Selftest(Animat_Espeed * 8);
-                if (Animat_Espeed)
-                    Animat_Espeed = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-
-                // 里程自检
-                if ((Get_Disp_Mileage_Mode() != Mileage_Mode_TempErr) && ((!Get_ID_113_Tbatt()) || (get_ID_ISG_BATT() > 10)))
-                {
-                    SEG_LCD_ODO_Trip_FaultCode_Selftest(Animat_ODO / 150);
-                }
-                else
-                {
-                    SEG_LCD_BatteryErr_Display(1, Common_GetIgnOnTime());
-                    BatteryErrFlg = 1;
-                }
-
-                if (Animat_ODO)
-                    Animat_ODO = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-                // 水温自检
-                SEG_Coolant_Temp_Display(1, Animat_Temp / 300);
-                if (Animat_Temp)
-                    Animat_Temp = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-                // 燃油自检
-                SEG_Fuel_Level_Display(1, Animat_Fuel / 300);
-                if (Animat_Fuel)
-                    Animat_Fuel = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-                // 蓄电池电压自检
-                SEG_LCD_Battery_Voltage_Selftest(Animat_Battery / 150);
-                if (Animat_Battery)
-                    Animat_Battery = IGON_SelfcheckingTimer - Common_GetIgnOnTime();
-            }
-        }
-        else
-        {
-            // 20221117  TYW大计清零后，循环显示断码检测
-            if (get_SEG_Check_Contrl())
-            {
-                if (SEG_Check_ContrlTime > 300)
-                {
-                    SEG_Check_ContrlTime = 0;
-                    Animat_GEAR = 0u;
-                    Animat_Vspeed = 0u;
-                    Animat_Espeed = 0u;
-                    Animat_ODO = 0u;
-                    Animat_Temp = 0u;
-                    Animat_Fuel = 0u;
-                    Animat_Battery = 0u;
-                }
-                else
-                {
-                    SEG_Check_ContrlTime++;
-                }
-                // 档位自检
-                SEG_LCD_Gear_Selftest(Animat_GEAR / 30);
-                Animat_GEAR += 1;
-                // 车速自检
-                SEG_LCD_Vehicle_Speed_Num_Selftest(Animat_Vspeed / 30);
-                Animat_Vspeed += 1;
-                // 转速自检12000
-                SEG_LCD_Engine_Speed_Seg_Selftest(Animat_Espeed * 40);
-                Animat_Espeed += 1;
-                // 里程自检
-                SEG_LCD_ODO_Trip_FaultCode_Selftest(Animat_ODO / 30);
-                Animat_ODO += 1;
-                // 水温自检
-                SEG_Coolant_Temp_Display(1, Animat_Temp / 50);
-                Animat_Temp += 1;
-                // 燃油自检
-                SEG_Fuel_Level_Display(1, Animat_Fuel / 50);
-                Animat_Fuel += 1;
-                // 蓄电池电压自检
-                SEG_LCD_Battery_Voltage_Selftest(Animat_Battery / 30);
-                Animat_Battery += 1;
-            }
-        }
-    }
-    else
-    {
-        Animat_GEAR = 0u;
-        Animat_Vspeed = 0u;
-        Animat_Espeed = 0u;
-        Animat_ODO = 0u;
-        Animat_Temp = 0u;
-        Animat_Fuel = 0u;
-        Animat_Battery = 0u;
-    }
+
 }
 
 void Get_ID_02_Data(uint8_t** buffer, uint8_t* length)

HJ232_Source/source/Application/Menu/Menus.c

@@ -8,7 +8,7 @@
 #include "CalcFrequency.h" 
 #include "CAN_Communication_Matrix.h" 
 #include "Flash_synchronizer.h"
-
+#include "Services_Mileage.h"
 uint8_t MenuByte6 = 0;
 uint8_t MenuByte7 = 0;
 uint8_t MenuByte8 = 0;

HJ232_Source/source/Application/PowerManagement/PowerManagement_user.c

@@ -25,12 +25,12 @@
 #include "U2_uds_includes.h"
 #include "CAN_User.h"
 #include "BU98R10.h"
-#include "SEG_LCD.h"
+
 #include "can.h"
 #include "RTE_ADC.h"
 #include "IS31FL3236.h"
 #include "AW93015.h"
-
+#include "Services_Mileage.h"
 
 uint16_t g_sleepDelay = 0;
 
@@ -44,11 +44,14 @@ void Power_KL30_Init ( void )
     Fuel_KL30_Init();
 		CoolantTemp_KL30_Init();
  //   eeprom_StoreInfo_Init( );
- //   CalcODOKL30Init();
+
     Data_Gear_KL30_Init();
 	  	//APP_CAN_Init();
     //SEG_LCD_Init(); 
+
+    BU98R10_Init();
     MenuKL30Init();
+    Data_User_Mileage_KL30Init();
 
 }
 
@@ -61,9 +64,11 @@ void Power_Sleep_Init(void)
     Capture_Stop(39);
     Capture_Stop(40);
     Analog_Signal_Conv_Stop();
-	SEG_LCD_Shutdown();
+
     IS31_Shutdown();
 
+    BU98R10_Shutdown();
+
 	GPIO_Init(GPIO_SLEEP_MODE );
     INTC_DisableIRQ(LVI_IRQn      );
     INTC_DisableIRQ(INTP0_IRQn    );
@@ -200,9 +205,10 @@ void Power_Wakeup_Init ( void )
     IS31_OFF_Wakeup();
     IS31FL3236_Update();
     Init93015_IIC();//4034
-
+    BU98R10_Init();
 	APP_CAN_Init();
     IS31FL3236_Init();
+    Data_User_Mileage_WakeupInit();
 }
 
 
@@ -210,13 +216,6 @@ void Power_Wakeup_Init ( void )
 
 void Power_IG_OFF_Init(void)
 {
-    SEG_LCD_Vehicle_Speed_Num_Display(0, 0, 0);
-    SEG_LCD_Engine_Speed_Seg_Display(0, 0, 0);
-    SEG_LCD_ODO_Trip_Display(0, 0, 0, 0);
-    SEG_Fuel_Level_Display(0, 0);
-    SEG_LCD_Battery_Voltage_Display(0, 0 ,0);
-    SEG_LCD_Gear_Display(0, 0, 0);
-    SEG_Coolant_Temp_Display(0, 0);
 	
     Line_In_KL15_OFF_Init();
     Common_Set_IG_Sts(COMMON_POWER_OFF);
@@ -246,16 +245,15 @@ void Power_IG_ON_Init(void)
     uart2_User_KL15_Init();
     CalcFreq_KL15_Init();
     APP_CAN_Init();
-    CalcODOKL15Init();
+
     Common_Set_IG_Sts(COMMON_POWER_ON);
     //   UART2_Init(115200);
-    SEG_LCD_Init();
     //IS31FL3236_Init();
     Init93015_IIC(); // 4034
     DtcFaultInit();
     /*----------------------------------------*/
     BatteryVoltageDelayInit();
-    Set_SEG_Check_Contrl(0);
+
 }
 void Power_IG_OVP_Init(void)
 {

HJ232_Source/source/Application/Telltales/Telltales_user.c

@@ -4,7 +4,7 @@
 #include "Common_Interface.h"
 #include "Line_in.h"
 #include "CAN_User.h"
-#include "SEG_LCD.h"
+
 #include "CoolantTemp.h"
 #include "gpio.h"
 #include "Fuel.h"
@@ -35,700 +35,20 @@ void Telltales_Init(void)
 const LED_Attribute_st LED_Attribute[LED_Max] =
 {
     /*  指示灯索引                  是否自检          外部信号自检          工作电源状态      自检开始时间  自检持续时间                 指示灯点亮条件                        指示灯执行函数                   */
-    {   m_LED_RIGHT             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_RIGHT_Judgement              ,   LED_RIGHT_Execution             },//右转向
-    {   m_LED_LEFT              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_LEFT_Judgement               ,   LED_LEFT_Execution              },//左转向
-    {   m_LED_HI_BEAM           ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_HI_BEAM_Judgement            ,   LED_HI_BEAM_Execution           },//远光灯
-    {   m_LED_MIL               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_MIL_Judgement                ,   LED_MIL_Execution               },//发动机报警灯
-    {   m_LED_ABS               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_ABS_Judgement                ,   LED_ABS_Execution               },//ABS_低有效
-    {   m_LED_TSC               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_TSC_Judgement                ,   LED_TSC_Execution               },//TSC
-    {   m_LED_AutoStarStop      ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_AutoStarStop_Judgement       ,   LED_AutoStarStop_Execution      },//自动启停
-    {   m_LED_Batterylow        ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_Batterylow_Judgement         ,   LED_Batterylow_Execution        },//蓄电池电压报警
-    {   m_LED_Auto_HI_BEAM      ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_Auto_HI_BEAM_Judgement       ,   LED_Auto_HI_BEAM_Execution      },//自动远光灯（预留）
-    {   m_LED_Shore             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_Shore_Judgement              ,   LED_Shore_Execution             },//边撑状态
-    {   m_LED_ENGINE_OIL_LOW    ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_ENGINE_OIL_LOW_Judgement     ,   LED_ENGINE_OIL_LOW_Execution    },//机油压力报警灯（预留）
-    {   m_LED_TPMS              ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_TPMS_Judgement               ,   LED_TPMS_Execution              },//胎压功能（预留）
-    {   m_LED_READY             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_READY_Judgement              ,   LED_READY_Execution             },//READY
-    {   m_LED_Fuel              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_Fuel_Judgement               ,   LED_Fuel_Execution              },//燃油
-    {   m_LED_Temp              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     LED_Temp_Judgement               ,   LED_Temp_Execution              },//水温
+    {   m_LED_RIGHT             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//右转向
+    {   m_LED_LEFT              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//左转向
+    {   m_LED_HI_BEAM           ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//远光灯
+    {   m_LED_MIL               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//发动机报警灯
+    {   m_LED_ABS               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//ABS_低有效
+    {   m_LED_TSC               ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//TSC
+    {   m_LED_AutoStarStop      ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//自动启停
+    {   m_LED_Batterylow        ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//蓄电池电压报警
+    {   m_LED_Auto_HI_BEAM      ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//自动远光灯（预留）
+    {   m_LED_Shore             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//边撑状态
+    {   m_LED_ENGINE_OIL_LOW    ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//机油压力报警灯（预留）
+    {   m_LED_TPMS              ,  NoSelfCheck   ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//胎压功能（预留）
+    {   m_LED_READY             ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//READY
+    {   m_LED_Fuel              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//燃油
+    {   m_LED_Temp              ,  SelfCheck     ,  NoExterNalCheck  ,   LED_IGN_ON    ,       0u,     IGON_SelfcheckingTimer,     NULL     ,   NULL  },//水温
 };
 
-/******************************************************************************
-  右转向灯
-  信号接口：硬线
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_RIGHT_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_RightTurn);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_RIGHT_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_RightTurn(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Right, 1);
-    }
-    else
-    {
-        SEG_LCD_RightTurn(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_Right, 0);
-    }
-}
-/******************************************************************************
-  左转向灯
-  信号接口：硬线
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_LEFT_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_LeftTurn);
-    if (Get_LIne_Sta == LINE_IN_LOGIC_VALID)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_LEFT_Execution(uint16_t led_status)
-{
-
-    if (led_status == 1u)
-    {
-        SEG_LCD_LeftTurn(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Left, 1);
-    }
-    else
-    {
-        SEG_LCD_LeftTurn(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_Left, 0);
-    }
-}
-/******************************************************************************
-  远光灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_HI_BEAM_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_HighBeam);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_HI_BEAM_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_HighBeam(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_HighBeam, 1);
-    }
-    else
-    {
-        SEG_LCD_HighBeam(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_HighBeam, 0);
-    }
-}
-/******************************************************************************
-  发动机故障报警灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_MIL_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_OBD);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_MIL_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_OBD(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_OBD, 1);
-    }
-    else
-    {
-        SEG_LCD_OBD(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_OBD, 0);
-    }
-}
-/******************************************************************************
-  ABS故障报警灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_ABS_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_ABS);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_ABS_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_ABS(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_ABS, 1);
-    }
-    else
-    {
-        SEG_LCD_ABS(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_ABS, 0);
-    }
-}
-/******************************************************************************
-  TSC故障报警灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_TSC_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    uint8_t Get_CANdate1 = 0u;
-    uint8_t Get_CANdate2 = 0u;
-    uint8_t Get_CANdate3 = 0u;
-
-    static  uint8_t  gu8_flashCnt = 0;
-    static  uint16_t  gu16_last_TCS_workMode = 0x00;
-    static  uint16_t  gu16_last_result = 0u;
-
-    Get_CANdate = Get_ID_125_Sig_TCS_SysState();
-    Get_CANdate1 = Get_ID_125_Sig_TCS_WorkMode();
-    Get_CANdate2 = Get_ID_125_Sig_TCS_WarningLamp();
-    Get_CANdate3 = (CAN_SIG_NORMAL == CAN_MSG_Status(ID_TCS_Count)) ? 1 : 0;
-
-    if (Common_GetIgnOnTime() > 3200)
-    {
-/*
-        if ((Get_CANdate3 == 1) && (Get_CANdate1 == 0) && Get_TCS_Status())
-        {
-            if ((Get_CANdate == 0u) || (Get_CANdate2 == 1))
-            {
-                Set_TCS_WorkModeFlshTime(120);
-
-                if (Get_CANdate == 0) // TCS_SysState_Init
-                {
-                    u8Result = 1u;
-                }
-                else if (Get_CANdate2 == 1) // TCS_WarningLamp_Open
-                {
-                    if (FLASH_SYNC_1Hz)
-                    {
-                        u8Result = 1;
-                    }
-                    else
-                    {
-                        u8Result = 0;
-                    }
-                }
-            }
-            else
-            {
-                if (Get_TCS_WorkModeFlash() == 1) // Six_Flash
-                {
-                    if (FLASH_SYNC_1Hz)
-                    {
-                        u8Result = 1;
-                    }
-                    else
-                    {
-                        u8Result = 0;
-                    }
-                }
-            }
-        }
-        else
-        {
-            Set_TCS_WorkModeFlshTime(0);
-            u8Result = 0u;
-        }
-*/
-
-        if ( Get_TCS_Status() == 0 )
-        {
-            gu8_flashCnt = 0;
-            gu16_last_TCS_workMode = 0x01;
-            return  u8Result = 0u;
-        }  /*  */
-
-        if ( CAN_SIG_LOST == CAN_MSG_Status( ID_TCS_Count ) )
-        {
-            gu8_flashCnt = 0;
-            gu16_last_TCS_workMode = 0x01;
-            return  u8Result = 0u;
-        }  /*  */
-
-        //tmpTCS_workMode = Get_ID_125_Sig_TCS_WorkMode();
-
-        if ( 0x01 == Get_CANdate1 )
-        {
-            gu8_flashCnt = 0;
-            gu16_last_TCS_workMode = Get_CANdate1;
-            return  u8Result = 0u;
-        }  /*  */
-
-        //tmpTCS_SysState = Get_ID_125_Sig_TCS_SysState();
-
-        if ( 0x00 == Get_CANdate ) 
-        {
-            gu8_flashCnt = 0;
-            gu16_last_TCS_workMode = Get_CANdate1;
-            return  u8Result = 1u;
-        }
-
-        //tmpTCS_WarningLamp = Get_ID_125_Sig_TCS_WarningLamp();
-
-        if ( 0x01 == Get_CANdate2 )
-        {
-        /* 1. */
-            if ( FLASH_SYNC_1Hz )
-            {  u8Result = 1u;  }
-            else
-            {  u8Result = 0u;  }
-
-            gu8_flashCnt = 0;
-            gu16_last_TCS_workMode = 0;
-        }
-        else
-        {
-            if ( 0x01 == gu16_last_TCS_workMode )   //上一次的工作模式为1,表示上一次灯关闭;当前工作模式为0，灯闪烁
-            {
-                if ( FLASH_SYNC_1Hz )
-                {  u8Result = 1u;  }
-                else
-                {  u8Result = 0u;  }
-
-                if ( gu16_last_result != u8Result )
-                {
-                    gu8_flashCnt++;
-                    gu16_last_result = u8Result;
-
-                    if ( gu8_flashCnt > 12 )
-                    {
-                        gu16_last_TCS_workMode = Get_CANdate1;
-                        u8Result = 1u;
-                    }
-                }
-            }
-            else
-            {
-                u8Result = 1u;
-                gu16_last_result = u8Result;
-                gu8_flashCnt = 0;
-            }
-        }
-
-    }
-    return u8Result;
-}
-void LED_TSC_Execution(uint16_t led_status)
-{	
-    if ((led_status == 1u) && (Get_TCS_Status()))
-    {		
-		SEG_LCD_TSC(SEG_LCD_LIGHT);
-		App_Telltales_Ctrl(LED_TLight, 1);
-		
-    }
-    else
-    {
-        SEG_LCD_TSC(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_TLight, 0);
-    }
-
-
-}
-/******************************************************************************
-  自动启停故障报警灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_AutoStarStop_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_AutoStarStop);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_AutoStarStop_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_AutoStarStop(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_AutoStartStop, 1);
-    }
-    else
-    {
-        SEG_LCD_AutoStarStop(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_AutoStartStop, 0);
-    }
-}
-/******************************************************************************
-  蓄电池电压报警
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_Batterylow_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    u8Result = Get_LED_ECU_Battery_VoltageFlag();
-    Get_CANdate = (CAN_SIG_NORMAL == CAN_MSG_Status(ID_ECU_Battery_Count)) ? 1 : 0;
-    
-    if ((u8Result == 1u) && (Get_CANdate == 1))
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_Batterylow_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_Batterylow(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Battery, 1);
-    }
-    else
-    {
-        SEG_LCD_Batterylow(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_Battery, 0);
-    }
-}
-/******************************************************************************
-  自动远光灯（预留）
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_Auto_HI_BEAM_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    // Get_CANdate = get_240_MILLampSts();
-    //Get_CANdate = get_113_MILLampSts();
-    if (Get_CANdate == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_Auto_HI_BEAM_Execution(uint16_t led_status)
-{
-    //if (led_status == 1u)
-    if (0)
-    {
-        SEG_LCD_HI_BEAM(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_ALight, 1);
-    }
-    else
-    {
-        SEG_LCD_HI_BEAM(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_ALight, 0);
-    }
-}
-/******************************************************************************
-  边撑状态
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_Shore_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    Get_CANdate = Get_ID_111_Sig_ISG_SideStand();
-    if (Get_CANdate == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_Shore_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_Shore(SEG_LCD_LIGHT);
-        PORT_SetBit(TLight_OUT);
-    }
-    else
-    {
-        SEG_LCD_Shore(SEG_LCD_OFF);
-        PORT_ClrBit(TLight_OUT);
-    }
-}
-/******************************************************************************
-  机油压力低报警灯
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_ENGINE_OIL_LOW_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    // Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_OilPressure);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_ENGINE_OIL_LOW_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_OilPressure(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_OilPressure, 1);
-    }
-    else
-    {
-        SEG_LCD_OilPressure(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_OilPressure, 0);
-    }
-}
-/******************************************************************************
-  胎压功能（预留）
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_TPMS_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_LIne_Sta = 0u;
-    // Get_LIne_Sta = (uint8_t)Line_In_Get_Status(LINE_IN_OilPressure);
-    if (Get_LIne_Sta == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_TPMS_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_TirePressure(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_TirePressure, 1);
-    }
-    else
-    {
-        SEG_LCD_TirePressure(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_TirePressure, 0);
-    }
-}
-/******************************************************************************
-  READY
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_READY_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    Get_CANdate = Get_ID_111_ISG_Ready();
-    if (Get_CANdate == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_READY_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_READY(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_READY, 1);
-    }
-    else
-    {
-        SEG_LCD_READY(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_READY, 0);
-    }
-}
-/******************************************************************************
-  燃油
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_Fuel_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_Fueldate = 0u;
-    Get_Fueldate = Get_CurFuelSetp();
-    if (Get_Fuel_Sensor_State() == FuelSensorNormal)
-    {
-        if (Get_Fueldate == 0u)
-        {
-            if(FLASH_SYNC_1Hz) 
-            	u8Result = 1;
-			else
-				u8Result = 0;
-        }
-        else if (Get_Fueldate == 1u)
-        {
-            u8Result = 1u;
-        }
-        else
-        {
-            u8Result = 2u;
-        }
-    }
-    else
-    {
-        u8Result = 2u;
-    }
-    
-    return u8Result;
-}
-extern uint8_t CurFuelSetp;
-void LED_Fuel_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_Fuel(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Fuel_W, 0);
-        App_Telltales_Ctrl(LED_Fuel_Y, 1);
-    }
-    else if (led_status == 2u)
-    {
-        SEG_LCD_Fuel(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Fuel_W, 1);
-        App_Telltales_Ctrl(LED_Fuel_Y, 0);
-    }
-    else
-    {
-        SEG_LCD_Fuel(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_Fuel_W, 0);
-        App_Telltales_Ctrl(LED_Fuel_Y, 0);
-    }
-}
-/******************************************************************************
-  水温
-  信号接口：
-  信号定义：
-  输出信号：
- ******************************************************************************/
-uint16_t LED_Temp_Judgement(void)
-{
-    uint16_t u8Result = 0u;
-    uint8_t Get_CANdate = 0u;
-    Get_CANdate = Get_CoolantTemp_Alarm();
-    if (Get_CANdate == 0u)
-    {
-        u8Result = 2u;
-    }
-    else if (Get_CANdate == 1u)
-    {
-        u8Result = 1u;
-    }
-    else
-    {
-        u8Result = 0u;
-    }
-    return u8Result;
-}
-void LED_Temp_Execution(uint16_t led_status)
-{
-    if (led_status == 1u)
-    {
-        SEG_LCD_Temp(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Temp_W, 0);
-        App_Telltales_Ctrl(LED_Temp_R, 1);
-    }
-    else if (led_status == 2u)
-    {
-        SEG_LCD_Temp(SEG_LCD_LIGHT);
-        App_Telltales_Ctrl(LED_Temp_W, 1);
-        App_Telltales_Ctrl(LED_Temp_R, 0);
-    }
-    else
-    {
-        SEG_LCD_Temp(SEG_LCD_OFF);
-        App_Telltales_Ctrl(LED_Temp_W, 0);
-        App_Telltales_Ctrl(LED_Temp_R, 0);
-    }
-}

HJ232_Source/source/Application/Telltales/Telltales_user.h

@@ -25,36 +25,6 @@ typedef enum
 } LED_Idx_t;
 
 
-uint16_t LED_RIGHT_Judgement(void);
-void    LED_RIGHT_Execution(uint16_t led_status);
-uint16_t LED_LEFT_Judgement(void);
-void    LED_LEFT_Execution(uint16_t led_status);
-uint16_t LED_HI_BEAM_Judgement(void);
-void    LED_HI_BEAM_Execution(uint16_t led_status);
-uint16_t LED_MIL_Judgement(void);
-void    LED_MIL_Execution(uint16_t led_status);
-uint16_t LED_ABS_Judgement(void);
-void    LED_ABS_Execution(uint16_t led_status);
-uint16_t LED_TSC_Judgement(void);
-void    LED_TSC_Execution(uint16_t led_status);
-uint16_t LED_AutoStarStop_Judgement(void);
-void    LED_AutoStarStop_Execution(uint16_t led_status);
-uint16_t LED_Batterylow_Judgement(void);
-void    LED_Batterylow_Execution(uint16_t led_status);
-uint16_t LED_Auto_HI_BEAM_Judgement(void);
-void    LED_Auto_HI_BEAM_Execution(uint16_t led_status);
-uint16_t LED_Shore_Judgement(void);
-void    LED_Shore_Execution(uint16_t led_status);
-uint16_t LED_ENGINE_OIL_LOW_Judgement(void);
-void    LED_ENGINE_OIL_LOW_Execution(uint16_t led_status);
-uint16_t LED_TPMS_Judgement(void);
-void    LED_TPMS_Execution(uint16_t led_status);
-uint16_t LED_READY_Judgement(void);
-void    LED_READY_Execution(uint16_t led_status);
-uint16_t LED_Fuel_Judgement(void);
-void    LED_Fuel_Execution(uint16_t led_status);
-uint16_t LED_Temp_Judgement(void);
-void    LED_Temp_Execution(uint16_t led_status);
 
 
 

HJ232_Source/source/Driver/inc/SEG_LCD.h

-#ifndef _SEG_LCD_H_
-#define _SEG_LCD_H_
-
-#include "BU98R10.H"
-
-
-/******************************************************************************
-段码状态
-******************************************************************************/
-#define   SEG_LCD_LIGHT                     7
-#define   SEG_LCD_GRAY                      1
-#define   SEG_LCD_GRAY_2                    2
-#define   SEG_LCD_OFF                       0
-#define   SEG_LCD_ON                        255
-/******************************************************************************
-显示模式
-******************************************************************************/
-#define   GUI_DISP_MODE_NORMAL              0x00    //正常
-#define   GUI_DISP_MODE_WARNING             0x01    //报警
-#define   GUI_DISP_MODE_NEGATIVE            0x01    //负数
-#define   GUI_DISP_MODE_BLANK               0x02    //空白
-#define   GUI_DISP_MODE_INVALID             0x03    //无效
-
-/******************************************************************************
-段码液晶显示数据备份结构
-******************************************************************************/
-typedef struct
-{
-  uint8_t   Brightness;
-  uint8_t   Window;
-  uint8_t   SetMode;
-  uint8_t   VSpeedSeg;
-  uint8_t   ESpeedSeg;
-  uint16_t  VSpeed;
-  uint16_t  ESpeed; 
-  uint16_t  Voltage;
-  uint8_t   VolCANset;
-	uint8_t   Gear;
-	uint8_t   TempSeg;
-	uint8_t   FuelSeg;
-	uint8_t   ODOMode;
-	uint32_t  ODOMileage;
-	uint8_t   ODOUnit;
-	uint32_t  ODOFaultCode;
-	
-}SEGLCDBackupStruct;
-
-/******************************************************************************
-图标状态寄存器SEGLCDIconxxxStatus位定义
-================================================================
- Bit 7 | SEG_LCD_ICON_FORCE      | 强制显示标志
--------+-------------------------+------------------------------
- Bit 6 | Rsvd.                   | 保留
--------+-------------------------+------------------------------
- Bit 5 | Rsvd.                   | 保留
--------+-------------------------+------------------------------
- Bit 4 | Rsvd.                   | 保留
--------+-------------------------+------------------------------
- Bit 3 | Rsvd.                   | 保留
--------+-------------------------+------------------------------
- Bit 2 | Rsvd.                   | 保留
--------+-------------------------+------------------------------
- Bit 1 | SEG_LCD_ICON_FORCE_STAT | 强制显示状态 1-强制点亮 0-强制熄灭
--------+-------------------------+------------------------------
- Bit 0 | SEG_LCD_ICON_STAT       | 显示状态 1-点亮 0-熄灭
-================================================================
-******************************************************************************/
-#define  SEG_LCD_ICON_FORCE                 ((uint8_t)0x80)
-#define  SEG_LCD_ICON_FORCE_STAT            ((uint8_t)0x02)
-#define  SEG_LCD_ICON_STAT                  ((uint8_t)0x01)
-
-
-#define Clr_Bit(p, b)           (p) &= (~(1u << (b)))
-#define Set_Bit(p, b)           (p) |= (1u << (b))
-#define Bit_Is_Set(p, b)        ((p) &(1u << (b)))
-#define Bit_Is_Clr(p, b)       (!((p) & (1u << (b))))
-
-/******************************************************************************
-Icon开关状态
-******************************************************************************/
-typedef enum
-{
-  SEG_LCD_ICON_OFF = 0,    //熄灭图标
-  SEG_LCD_ICON_ON,         //点亮图标
-  SEG_LCD_ICON_FORCE_OFF,  //强制熄灭图标,通过 SEG_LCD_ICON_OFF / SEG_LCD_ICON_ON 状态不能控制图标熄灭或点亮
-  SEG_LCD_ICON_FORCE_ON,   //强制点亮图标,通过 SEG_LCD_ICON_OFF / SEG_LCD_ICON_ON 状态不能控制图标熄灭或点亮
-  SEG_LCD_ICON_FREE,       //取消对图标的强制熄灭或点亮,将图标交由 SEG_LCD_ICON_OFF / SEG_LCD_ICON_ON 状态控制 
-}SEGLCDIconStatusEnum;
-/**********************************************************************************
-全局变量
-***********************************************************************************/
-extern SEGLCDBackupStruct   SEGLCDBackup;
-
-/******************************************************************************
-函数声明
-******************************************************************************/
-void SEG_LCD_Init(void);
-void SEG_LCD_Shutdown(void);
-
-
-
-void SEG_LCD_Gear_Display(uint8_t m_Flag, uint8_t SegNum, uint8_t CanStand);
-void SEG_LCD_Gear_Selftest(uint8_t Gear);
-void SEG_LCD_Vehicle_Speed_Num_Display(uint8_t m_Flag, uint8_t SetMode, uint16_t Vspeed);  //1:mph default:km/h
-void SEG_LCD_Vehicle_Speed_Num_Selftest(uint16_t Vspeed);
-void SEG_LCD_Engine_Speed_Seg_Display(uint8_t m_Flag, uint16_t SegNum, uint8_t SpeedStand);
-void SEG_LCD_Engine_Speed_Seg_Selftest(uint16_t SegNum);
-void SEG_LCD_ODO_Trip_Display(uint8_t m_Flag, uint8_t Mode, uint8_t Unit, uint32_t Mileage);
-void SEG_LCD_FaultCode_Display(uint8_t m_Flag, uint32_t FaultCodeDisp);
-void SEG_LCD_ODO_Trip_FaultCode_Selftest(uint8_t Mileage);
-void SEG_LCD_BatteryErr_Display(uint8_t m_Flag, uint32_t ModeTime);
-void SEG_Coolant_Temp_Display(uint8_t m_Flag, uint8_t Seg);
-void SEG_Fuel_Level_Display(uint8_t m_Flag, uint8_t Seg);
-void SEG_LCD_Battery_Voltage_Display(uint8_t m_Flag, uint8_t Voltage ,uint16_t VolCANset);
-void SEG_LCD_Battery_Voltage_Selftest(uint8_t Voltage);
-
-
-
-
-//Light
-void SEG_LCD_OilPressure(uint8_t state);
-void SEG_LCD_TirePressure(uint8_t state);
-void SEG_LCD_READY(uint8_t state);
-void SEG_LCD_ABS(uint8_t state);
-void SEG_LCD_TSC(uint8_t state);
-void SEG_LCD_AutoStarStop(uint8_t state);
-void SEG_LCD_Batterylow(uint8_t state);
-void SEG_LCD_HI_BEAM(uint8_t state);
-void SEG_LCD_Shore(uint8_t state);
-void SEG_LCD_OBD(uint8_t state);
-void SEG_LCD_HighBeam(uint8_t state);
-void SEG_LCD_LeftTurn(uint8_t state);
-void SEG_LCD_RightTurn(uint8_t state);
-void SEG_LCD_Fuel(uint8_t state);
-void SEG_LCD_Temp(uint8_t state);
-
-void Engine_Speed_Update(void);
-#endif 

HJ232_Source/source/Driver/src/BU98R10.C

 
 
 #include "BU98R10.h"
-#include "SEG_LCD.h"
 #include "IS31FL3236.h"
 
 /* 端口寄存器基地址 */

HJ232_Source/source/Driver/src/SEG_LCD.c

-
-#include "SEG_LCD.h"
-#include "Flash_synchronizer.h"
-#include "Data_Gear.h"
-#include "MCU_Core_Protocol.h"
-#include "Common_Interface.h"
-#include "BU98R10.h"
-#include "app_Telltales.h"
-#include "string.h"
-
-SEGLCDBackupStruct   SEGLCDBackup;
-
-uint8_t   DispText[6];
-
-                                       /*0,     1,     2,     3,     4,     5,     6,     7,     8,     9  */
-const uint8_t SEG_DISPLAY_NUMBER0[] = {0x3Fu, 0x06u, 0x5Bu, 0x4Fu, 0x66u, 0x6Du, 0x7Du, 0x07u, 0x7Fu, 0x6Fu};
-const uint8_t SEG_UNDISPLAY_NUMBER0[] = {0x00u, 0x06u, 0x5Bu, 0x4Fu, 0x66u, 0x6Du, 0x7Du, 0x07u, 0x7Fu, 0x6Fu};
-
-                                         /*0,     1,     2,     3,     4,     5,     6,     7,     8,     9,     A,     B,     C,     D,     E,     F  */
-const uint8_t SEG_HEX_DISPLAY_NUMBER0[] = {0x3Fu, 0x06u, 0x5Bu, 0x4Fu, 0x66u, 0x6Du, 0x7Du, 0x07u, 0x7Fu, 0x6Fu, 0x77u, 0x7Cu, 0x39u, 0x5Eu, 0x79u, 0x71u};
-
-
-void SEG_LCD_Init(void)                
-{
-    SEG_LCD_Vehicle_Speed_Num_Display(0, 0, 0);
-    SEG_LCD_Engine_Speed_Seg_Display(0, 0, 0);
-    SEG_LCD_ODO_Trip_Display(0, 0, 0, 0);
-    SEG_Fuel_Level_Display(0, 0);
-    SEG_LCD_Battery_Voltage_Display(0, 0 ,0);
-    SEG_Coolant_Temp_Display(0, 0);
-    SEG_LCD_Gear_Display(0, 0, 0);
-
-    BU98R10_Init();
-}
-
-void SEG_LCD_Shutdown(void)
-{
-    BU98R10_Shutdown();
-    App_Telltales_AllOFF();
-
-    SEGLCDBackup.Brightness = 0x00;
-    SEGLCDBackup.Window     = 0x00;
-}
-
-void Conv_Single_DECHEX(uint8_t *m_NUM, uint32_t FaultCodeDisp)
-{
-    uint8_t temp8 = 0;
-    uint8_t cont = 0;
-
-    memset(m_NUM, 0, 4);
-    if (FaultCodeDisp < 16)
-    {
-        m_NUM[0] = FaultCodeDisp;
-    }
-    
-    while (FaultCodeDisp >= 16)
-    {
-        temp8 = (FaultCodeDisp % 16);
-        m_NUM[cont] = temp8;
-        cont++;
-        FaultCodeDisp /= 16;
-        if (FaultCodeDisp < 16)
-            m_NUM[cont] = FaultCodeDisp;
-    }
-}
-
-/******************************************************************************
-��������SEG_LCD_Gear_Display
-��  ��: ��λ����ʾ
-��  ��:
-����ֵ��
-******************************************************************************/
-void SEG_LCD_Gear_Display(uint8_t m_Flag, uint8_t SegNum, uint8_t CanStand)
-{
-    uint8_t Num;
-    uint8_t m8;
-    static uint8_t Gear;
-
-    if (m_Flag == 1)
-    {
-        PORT_SetBit(LightModeCtrl);  //背光 ON
-
-        if (CanStand == CAN_SIG_NORMAL)
-        {
-            Gear = SegNum;
-        }
-        
-        if (SEGLCDBackup.Gear != Gear)
-        {
-            SEGLCDBackup.Gear = Gear;
-
-            BU98R10_1_SEG46 = SEG_LCD_LIGHT; // Mode
-            BU98R10_1_SEG47 = SEG_LCD_LIGHT; // P
-
-            if (Gear >= 2)
-            {
-                BU98R10_1_SEG54 = SEG_LCD_OFF;
-
-                BU98R10_1_SEG53 = SEG_LCD_OFF;
-                BU98R10_1_SEG52 = SEG_LCD_OFF;
-                BU98R10_1_SEG51 = SEG_LCD_OFF;
-                BU98R10_1_SEG50 = SEG_LCD_OFF;
-                BU98R10_1_SEG48 = SEG_LCD_OFF;
-                BU98R10_1_SEG49 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                /*个位*/
-                Num = Gear % 10u;
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-                if (Bit_Is_Set(m8, 0))
-                {
-                    BU98R10_1_SEG54 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG54 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 1))
-                {
-                    BU98R10_1_SEG53 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG53 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 2))
-                {
-                    BU98R10_1_SEG52 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG52 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 3))
-                {
-                    BU98R10_1_SEG51 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG51 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 4))
-                {
-                    BU98R10_1_SEG50 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG50 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 5))
-                {
-                    BU98R10_1_SEG48 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG48 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 6))
-                {
-                    BU98R10_1_SEG49 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_1_SEG49 = SEG_LCD_OFF;
-                }
-            }
-
-        }
-    }
-    else
-    {
-        PORT_ClrBit(LightModeCtrl);  //背光OFF
-
-        BU98R10_1_SEG46 = SEG_LCD_OFF; // Mode
-        BU98R10_1_SEG47 = SEG_LCD_OFF; // P
-        
-        BU98R10_1_SEG54 = SEG_LCD_OFF;
-        BU98R10_1_SEG53 = SEG_LCD_OFF;
-        BU98R10_1_SEG52 = SEG_LCD_OFF;
-        BU98R10_1_SEG51 = SEG_LCD_OFF;
-        BU98R10_1_SEG50 = SEG_LCD_OFF;
-        BU98R10_1_SEG48 = SEG_LCD_OFF;
-        BU98R10_1_SEG49 = SEG_LCD_OFF;
-        SEGLCDBackup.Gear = 0xff;
-    }
-}
-
-void SEG_LCD_Gear_Selftest(uint8_t Gear)
-{
-    uint8_t Num;
-    uint8_t m8;
-
-    PORT_SetBit(LightModeCtrl);  //背光 ON
-    if (SEGLCDBackup.Gear != Gear)
-    {
-        SEGLCDBackup.Gear = Gear;
-
-        BU98R10_1_SEG46 = SEG_LCD_LIGHT; // Mode
-        BU98R10_1_SEG47 = SEG_LCD_LIGHT; // P
-
-        /*个位*/
-        Gear = Gear > 9 ? 9 : Gear;
-        Num = Gear % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_1_SEG54 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG54 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_1_SEG53 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG53 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_1_SEG52 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG52 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_1_SEG51 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG51 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_1_SEG50 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG50 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_1_SEG48 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG48 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_1_SEG49 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG49 = SEG_LCD_OFF;
-        }
-    }
-}
-
-/******************************************************************************
-��������SEG_LCD_Vehicle_Speed_Num_Display
-��  ��: ���복����ʾ    
-��  ��:
-����ֵ��                               
-******************************************************************************/
-void SEG_LCD_Vehicle_Speed_Num_Display(uint8_t m_Flag, uint8_t SetMode ,uint16_t Vspeed)
-{
-    uint8_t Num;
-    uint8_t m8;
-
-    if (m_Flag == 1)
-    {
-        if ((SEGLCDBackup.VSpeed != Vspeed) || (SEGLCDBackup.SetMode != SetMode))
-        {
-            SEGLCDBackup.VSpeed = Vspeed;
-            SEGLCDBackup.SetMode = SetMode;
-
-            if(SetMode == 1)
-            {
-                BU98R10_1_SEG64 = SEG_LCD_LIGHT;  //mph
-                BU98R10_1_SEG63 = SEG_LCD_OFF;
-            }
-            else
-            {
-                BU98R10_1_SEG63 = SEG_LCD_LIGHT;  //km/h
-                BU98R10_1_SEG64 = SEG_LCD_OFF;
-            }
-
-            /*百位*/
-            Num = Vspeed / 100u;
-            if (Num >= 1u)
-            {
-                BU98R10_0_SEG51 = SEG_LCD_LIGHT;
-                PORT_SetBit(LightVehHundredsCtrl);
-            }
-            else
-            {
-                BU98R10_0_SEG51 = SEG_LCD_OFF;
-                PORT_ClrBit(LightVehHundredsCtrl);
-            }
-            /*十位*/
-            Num = (Vspeed / 10u) % 10u;
-            if (Vspeed >= 10u)
-            {
-                PORT_SetBit(LightVehTensCtrl);
-            }
-            else
-            {
-                PORT_ClrBit(LightVehTensCtrl);
-            }
-            if (Vspeed >= 100u)
-            {
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-            }
-            else
-            {
-                m8 = SEG_UNDISPLAY_NUMBER0[Num];
-            }
-
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG43 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG43 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG42 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG42 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG41 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG41 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG34 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG34 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG48 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG48 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG46 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG46 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG47 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG47 = SEG_LCD_OFF;
-            }
-            /*个位*/
-            Num = Vspeed % 10u;
-            m8 = SEG_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_1_SEG62 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG62 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_1_SEG61 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG61 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_1_SEG59 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG59 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_1_SEG58 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG58 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_1_SEG57 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG57 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_1_SEG56 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG56 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_1_SEG60 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_1_SEG60 = SEG_LCD_OFF;
-            }
-        }
-    }
-    else
-    {
-        BU98R10_1_SEG64 = SEG_LCD_OFF; // mph
-        BU98R10_1_SEG63 = SEG_LCD_OFF; // km/h
-
-        BU98R10_0_SEG51 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG43 = SEG_LCD_OFF;
-        BU98R10_0_SEG42 = SEG_LCD_OFF;
-        BU98R10_0_SEG41 = SEG_LCD_OFF;
-        BU98R10_0_SEG34 = SEG_LCD_OFF;
-        BU98R10_0_SEG48 = SEG_LCD_OFF;
-        BU98R10_0_SEG46 = SEG_LCD_OFF;
-        BU98R10_0_SEG47 = SEG_LCD_OFF;
-
-        BU98R10_1_SEG62 = SEG_LCD_OFF;
-        BU98R10_1_SEG61 = SEG_LCD_OFF;
-        BU98R10_1_SEG59 = SEG_LCD_OFF;
-        BU98R10_1_SEG58 = SEG_LCD_OFF;
-        BU98R10_1_SEG57 = SEG_LCD_OFF;
-        BU98R10_1_SEG56 = SEG_LCD_OFF;
-        BU98R10_1_SEG60 = SEG_LCD_OFF;
-
-        SEGLCDBackup.VSpeed = 0xFFFF;
-        SEGLCDBackup.SetMode = 0xFF;
-    }
-    
-}
-void SEG_LCD_Vehicle_Speed_Num_Selftest(uint16_t Vspeed)
-{
-    uint8_t Num;
-    uint8_t m8;
-
-    if (SEGLCDBackup.VSpeed != Vspeed)
-    {
-        SEGLCDBackup.VSpeed = Vspeed;
-        SEGLCDBackup.SetMode = 0xFF;;
-
-        BU98R10_1_SEG63 = SEG_LCD_LIGHT;  //km/h
-        BU98R10_1_SEG64 = SEG_LCD_LIGHT;
-
-        Vspeed = Vspeed > 9 ? 9 : Vspeed;
-
-        /*百位*/
-        if (Vspeed)
-        {
-            BU98R10_0_SEG51 = SEG_LCD_LIGHT;
-            PORT_SetBit(LightVehHundredsCtrl);
-        }
-        else
-        {
-            BU98R10_0_SEG51 = SEG_LCD_OFF;
-            PORT_ClrBit(LightVehHundredsCtrl);
-        }
-        
-        /*十位*/
-        PORT_SetBit(LightVehTensCtrl);
-        Num = Vspeed % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG43 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG43 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG42 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG42 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG41 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG41 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG34 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG34 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG48 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG48 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG46 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG46 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG47 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG47 = SEG_LCD_OFF;
-        }
-        /*个位*/
-        Num = Vspeed % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_1_SEG62 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG62 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_1_SEG61 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG61 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_1_SEG59 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG59 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_1_SEG58 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG58 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_1_SEG57 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG57 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_1_SEG56 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG56 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_1_SEG60 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_1_SEG60 = SEG_LCD_OFF;
-        }
-    }    
-}
-/******************************************************************************
-��������SEG_LCD_Engine_Speed_Seg_Display
-��  ��: ת�ٵ�SEG��ʾ    
-��  ��:
-����ֵ��                               
-******************************************************************************/
-uint16_t DispSegNum = 0 ;
-uint8_t OldSpeedStand = 0 ;
-void SEG_LCD_Engine_Speed_Seg_Display(uint8_t m_Flag, uint16_t SegNum, uint8_t SpeedStand)
-{
-    static uint8_t time = 0;
-
-    if (m_Flag == 1)
-    {
-        SegNum = (SegNum + SegNum / 20) / 500;
-
-        if (SegNum > 24)
-            SegNum = 24;
-
-        if (SpeedStand == 1)
-        {
-            OldSpeedStand = 5;
-        }
-
-        if (DispSegNum > SegNum)
-        {
-            if (time >= 2)
-            {
-                time = 0;
-                DispSegNum--;
-            }
-        }
-
-        if (DispSegNum < SegNum)
-        {
-            DispSegNum++;
-            if (OldSpeedStand)
-            {
-                OldSpeedStand--;
-                DispSegNum = SegNum;
-            }
-        }
-
-        time++;
-        BU98R10_0_SEG130  = SEG_LCD_OFF; //Mark
-        BU98R10_1_SEG70  = SEG_LCD_OFF; //Mark
-        BU98R10_1_SEG31  = SEG_LCD_OFF; //Mark
-        BU98R10_0_SEG101  = SEG_LCD_LIGHT; //Touch1
-        BU98R10_1_SEG55  = SEG_LCD_LIGHT; //Touch1
-        BU98R10_0_SEG37  = SEG_LCD_LIGHT; //X1000r/min
-        
-        BU98R10_0_SEG96  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG91  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG86  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG81  = SEG_LCD_LIGHT;  
-        BU98R10_0_SEG76  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG72  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG71  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG70  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG69  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG63  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG58  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG53  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG49  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG44  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG38  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG36  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG32  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG31  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG16  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG17  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG18  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG21  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG23  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG25  = SEG_LCD_LIGHT;
-        BU98R10_0_SEG26  = SEG_LCD_LIGHT;
-
-
-
-            
-        if (SEGLCDBackup.ESpeedSeg != DispSegNum)
-        {
-
-            SEGLCDBackup.ESpeedSeg = DispSegNum;
-            BU98R10_0_SEG100  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG95  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG90  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG85  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG80  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG75  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG74  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG73  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG68  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG64  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG59  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG54  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG50  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG45  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG40  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG39  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG35  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG33  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG30  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG29  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG19  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG20  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG22  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG24  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG27  = SEG_LCD_GRAY_2;
-            BU98R10_0_SEG28  = SEG_LCD_GRAY_2;
-
-            switch (DispSegNum)
-            {
-                case 24 :  BU98R10_0_SEG27 = SEG_LCD_LIGHT;  
-                case 23 :  BU98R10_0_SEG24 = SEG_LCD_LIGHT;
-                case 22 :  BU98R10_0_SEG22 = SEG_LCD_LIGHT; 
-                case 21 :  BU98R10_0_SEG20 = SEG_LCD_LIGHT;            
-                case 20 :  BU98R10_0_SEG19 = SEG_LCD_LIGHT;          
-                case 19 :  BU98R10_0_SEG29 = SEG_LCD_LIGHT;           
-                case 18 :  BU98R10_0_SEG30 = SEG_LCD_LIGHT;          
-                case 17 :  BU98R10_0_SEG33 = SEG_LCD_LIGHT; 
-                case 16 :  BU98R10_0_SEG35 = SEG_LCD_LIGHT;  
-                case 15 :  BU98R10_0_SEG39 = SEG_LCD_LIGHT;   
-                case 14 :  BU98R10_0_SEG40 = SEG_LCD_LIGHT;   
-                case 13 :  BU98R10_0_SEG45 = SEG_LCD_LIGHT; 
-                case 12 :  BU98R10_0_SEG50 = SEG_LCD_LIGHT; 
-                case 11 :  BU98R10_0_SEG54 = SEG_LCD_LIGHT; 
-                case 10 :  BU98R10_0_SEG59 = SEG_LCD_LIGHT; 
-                case 9  :  BU98R10_0_SEG64 = SEG_LCD_LIGHT;
-                case 8  :  BU98R10_0_SEG68 = SEG_LCD_LIGHT; 
-                case 7  :  BU98R10_0_SEG73 = SEG_LCD_LIGHT; 
-                case 6  :  BU98R10_0_SEG74 = SEG_LCD_LIGHT; 
-                case 5  :  BU98R10_0_SEG75 = SEG_LCD_LIGHT; 
-                case 4  :  BU98R10_0_SEG80 = SEG_LCD_LIGHT; 
-                case 3  :  BU98R10_0_SEG85 = SEG_LCD_LIGHT;           
-                case 2  :  BU98R10_0_SEG90 = SEG_LCD_LIGHT;           
-                case 1  :  BU98R10_0_SEG95 = SEG_LCD_LIGHT;          
-                default : break;
-            }
-
-        }
-    }
-    else
-    {
-        BU98R10_0_SEG130  = SEG_LCD_OFF; //Mark
-        BU98R10_1_SEG70  = SEG_LCD_OFF; //Mark
-        BU98R10_1_SEG31  = SEG_LCD_OFF; //Mark
-        BU98R10_0_SEG101  = SEG_LCD_OFF; //Touch1
-        BU98R10_1_SEG55  = SEG_LCD_OFF; //Touch1
-        BU98R10_0_SEG37  = SEG_LCD_OFF; //X1000r/min
-        
-        BU98R10_0_SEG96  = SEG_LCD_OFF;
-        BU98R10_0_SEG91  = SEG_LCD_OFF;
-        BU98R10_0_SEG86  = SEG_LCD_OFF;
-        BU98R10_0_SEG81  = SEG_LCD_OFF;  
-        BU98R10_0_SEG76  = SEG_LCD_OFF;
-        BU98R10_0_SEG72  = SEG_LCD_OFF;
-        BU98R10_0_SEG71  = SEG_LCD_OFF;
-        BU98R10_0_SEG70  = SEG_LCD_OFF;
-        BU98R10_0_SEG69  = SEG_LCD_OFF;
-        BU98R10_0_SEG63  = SEG_LCD_OFF;
-        BU98R10_0_SEG58  = SEG_LCD_OFF;
-        BU98R10_0_SEG53  = SEG_LCD_OFF;
-        BU98R10_0_SEG49  = SEG_LCD_OFF;
-        BU98R10_0_SEG44  = SEG_LCD_OFF;
-        BU98R10_0_SEG38  = SEG_LCD_OFF;
-        BU98R10_0_SEG36  = SEG_LCD_OFF;
-        BU98R10_0_SEG32  = SEG_LCD_OFF;
-        BU98R10_0_SEG31  = SEG_LCD_OFF;
-        BU98R10_0_SEG16  = SEG_LCD_OFF;
-        BU98R10_0_SEG17  = SEG_LCD_OFF;
-        BU98R10_0_SEG18  = SEG_LCD_OFF;
-        BU98R10_0_SEG21  = SEG_LCD_OFF;
-        BU98R10_0_SEG23  = SEG_LCD_OFF;
-        BU98R10_0_SEG25  = SEG_LCD_OFF;
-        BU98R10_0_SEG26  = SEG_LCD_OFF;
-
-        BU98R10_0_SEG100  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG95  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG90  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG85  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG80  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG75  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG74  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG73  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG68  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG64  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG59  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG54  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG50  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG45  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG40  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG39  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG35  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG33  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG30  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG29  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG19  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG20  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG22  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG24  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG27  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG28  = SEG_LCD_GRAY_2;
-
-        SEGLCDBackup.ESpeedSeg = 0xff;
-    }
-
-}
-void SEG_LCD_Engine_Speed_Seg_Selftest(uint16_t SegNum)
-{
-    SegNum = (SegNum+SegNum/20)/500;
-    if (SegNum > 24)
-        SegNum = 24;
-
-    BU98R10_0_SEG130  = SEG_LCD_OFF; //Mark
-    BU98R10_1_SEG70  = SEG_LCD_OFF; //Mark
-    BU98R10_1_SEG31  = SEG_LCD_OFF; //Mark
-    BU98R10_0_SEG101  = SEG_LCD_LIGHT; //Touch1
-    BU98R10_1_SEG55  = SEG_LCD_LIGHT; //Touch1
-    BU98R10_0_SEG37  = SEG_LCD_LIGHT; //X1000r/min
-    
-    BU98R10_0_SEG96  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG91  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG86  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG81  = SEG_LCD_LIGHT;  
-    BU98R10_0_SEG76  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG72  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG71  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG70  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG69  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG63  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG58  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG53  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG49  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG44  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG38  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG36  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG32  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG31  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG16  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG17  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG18  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG21  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG23  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG25  = SEG_LCD_LIGHT;
-    BU98R10_0_SEG26  = SEG_LCD_LIGHT;
-
-        
-    if (SEGLCDBackup.ESpeedSeg != SegNum)
-    {
-
-        SEGLCDBackup.ESpeedSeg = SegNum;
-        BU98R10_0_SEG100  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG95  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG90  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG85  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG80  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG75  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG74  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG73  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG68  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG64  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG59  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG54  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG50  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG45  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG40  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG39  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG35  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG33  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG30  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG29  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG19  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG20  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG22  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG24  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG27  = SEG_LCD_GRAY_2;
-        BU98R10_0_SEG28  = SEG_LCD_GRAY_2;
-
-        switch (SegNum)
-        {
-            case 24 :  BU98R10_0_SEG27 = SEG_LCD_LIGHT;  
-            case 23 :  BU98R10_0_SEG24 = SEG_LCD_LIGHT;
-            case 22 :  BU98R10_0_SEG22 = SEG_LCD_LIGHT; 
-            case 21 :  BU98R10_0_SEG20 = SEG_LCD_LIGHT;            
-            case 20 :  BU98R10_0_SEG19 = SEG_LCD_LIGHT;          
-            case 19 :  BU98R10_0_SEG29 = SEG_LCD_LIGHT;           
-            case 18 :  BU98R10_0_SEG30 = SEG_LCD_LIGHT;          
-            case 17 :  BU98R10_0_SEG33 = SEG_LCD_LIGHT; 
-            case 16 :  BU98R10_0_SEG35 = SEG_LCD_LIGHT;  
-            case 15 :  BU98R10_0_SEG39 = SEG_LCD_LIGHT;   
-            case 14 :  BU98R10_0_SEG40 = SEG_LCD_LIGHT;   
-            case 13 :  BU98R10_0_SEG45 = SEG_LCD_LIGHT; 
-            case 12 :  BU98R10_0_SEG50 = SEG_LCD_LIGHT; 
-            case 11 :  BU98R10_0_SEG54 = SEG_LCD_LIGHT; 
-            case 10 :  BU98R10_0_SEG59 = SEG_LCD_LIGHT; 
-            case 9  :  BU98R10_0_SEG64 = SEG_LCD_LIGHT;
-            case 8  :  BU98R10_0_SEG68 = SEG_LCD_LIGHT; 
-            case 7  :  BU98R10_0_SEG73 = SEG_LCD_LIGHT; 
-            case 6  :  BU98R10_0_SEG74 = SEG_LCD_LIGHT; 
-            case 5  :  BU98R10_0_SEG75 = SEG_LCD_LIGHT; 
-            case 4  :  BU98R10_0_SEG80 = SEG_LCD_LIGHT; 
-            case 3  :  BU98R10_0_SEG85 = SEG_LCD_LIGHT;           
-            case 2  :  BU98R10_0_SEG90 = SEG_LCD_LIGHT;           
-            case 1  :  BU98R10_0_SEG95 = SEG_LCD_LIGHT;          
-            default : break;
-        }
-
-    }
-
-}
-
-/******************************************************************************
-�������SSEG_LCD_ODO_Trip_Display
-��  ��: ODO_Trip������ʾ    
-��  ��: Mode0:TOTAL ,Mode1:Trip 1 ,Mode2:Trip 2 ,Mode3:FaultCode, Unit0:km ,Unit1:miles
-����ֵ��                               
-******************************************************************************/
-void SEG_LCD_ODO_Trip_Display(uint8_t m_Flag, uint8_t Mode ,uint8_t Unit, uint32_t Mileage)
-{
-    uint32_t m_NUM;
-    uint32_t Num;
-    uint8_t m8;
-    
-    if (m_Flag == 1u)
-    {
-        if ((SEGLCDBackup.ODOMode != Mode) || (SEGLCDBackup.ODOUnit != Unit) || (SEGLCDBackup.ODOMileage != Mileage)) 
-        {
-            SEGLCDBackup.ODOMode = Mode;
-            SEGLCDBackup.ODOUnit = Unit;
-            SEGLCDBackup.ODOMileage = Mileage;
-            
-            m_NUM = Mileage;// /10倍; 
-            if(Unit == 1)
-            {
-                BU98R10_0_SEG168 = SEG_LCD_OFF;  //miles
-                BU98R10_0_SEG169 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG170 = SEG_LCD_LIGHT;
-            }
-            else if(Unit == 0)
-            {
-                BU98R10_0_SEG168 = SEG_LCD_LIGHT;  //Km
-                BU98R10_0_SEG169 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG170 = SEG_LCD_OFF;
-            }
-
-            if (Mode == 0)
-            {
-                m_NUM = m_NUM > 999999 ? 999999 : m_NUM;
-                m_NUM /= 10;
-                BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-                BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-                BU98R10_0_SEG147 = SEG_LCD_OFF;
-                BU98R10_0_SEG148 = SEG_LCD_OFF;
-                BU98R10_0_SEG149 = SEG_LCD_LIGHT;
-
-            }
-            else if (Mode == 1)
-            {
-                BU98R10_0_SEG164 = SEG_LCD_LIGHT;  //point
-                BU98R10_0_SEG146 = SEG_LCD_LIGHT;  //TRIPA
-                BU98R10_0_SEG147 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG148 = SEG_LCD_OFF;
-                BU98R10_0_SEG149 = SEG_LCD_OFF;
-            }
-            else if (Mode == 2)
-            {
-                BU98R10_0_SEG164 = SEG_LCD_LIGHT;  //point
-                BU98R10_0_SEG146 = SEG_LCD_LIGHT;  //TRIPB
-                BU98R10_0_SEG147 = SEG_LCD_OFF;
-                BU98R10_0_SEG148 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG149 = SEG_LCD_OFF;
-                
-            }
-            
-            /*十万位*/
-            Num = (m_NUM / 100000u);
-            m8 = SEG_UNDISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG143 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG143 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG142 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG142 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG152 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG152 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG151 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG151 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG145 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG145 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG144 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG144 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG141 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG141 = SEG_LCD_OFF;
-            }
-            /*万位*/
-            Num = (m_NUM / 10000u) % 10u;
-            if (m_NUM > 99999)
-            {
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-            }
-            else
-            {
-                m8 = SEG_UNDISPLAY_NUMBER0[Num];
-            }
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG138 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG138 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG137 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG137 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG136 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG136 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG154 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG154 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG153 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG153 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG139 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG139 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG140 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG140 = SEG_LCD_OFF;
-            }
-            /*千位*/
-            Num = (m_NUM / 1000u) % 10u;
-            if (m_NUM > 9999)
-            {
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-            }
-            else
-            {
-                m8 = SEG_UNDISPLAY_NUMBER0[Num];
-            }
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG128 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG128 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG127 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG127 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG157 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG157 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG156 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG156 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG155 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG155 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG135 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG135 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG114 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG114 = SEG_LCD_OFF;
-            }
-            /*百位*/
-            Num = (m_NUM / 100u) % 10u;
-            if (m_NUM > 999)
-            {
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-            }
-            else
-            {
-                m8 = SEG_UNDISPLAY_NUMBER0[Num];
-            }
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG111 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG111 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG110 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG110 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG160 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG160 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG159 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG159 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG158 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG158 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG112 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG112 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG113 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG113 = SEG_LCD_OFF;
-            }
-            /*十位*/
-            Num = (m_NUM / 10u) % 10u;
-            if ((Mode == 1) || (Mode == 2))
-           {
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-            }
-            else
-            {
-                if (m_NUM > 99)
-                {
-                   m8 = SEG_DISPLAY_NUMBER0[Num];
-                }
-                else
-                {
-                   m8 = SEG_UNDISPLAY_NUMBER0[Num];
-                }
-            }
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG108 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG108 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG107 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG107 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG163 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG163 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG162 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG162 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG161 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG161 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG109 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG109 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG106 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG106 = SEG_LCD_OFF;
-            }
-            /*个位*/
-            Num = m_NUM % 10u;
-            m8 = SEG_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG104 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG104 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG103 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG103 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG167 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG167 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG166 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG166 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG165 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG165 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG105 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG105 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG102 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG102 = SEG_LCD_OFF;
-            }
-        }
-    }
-    else
-    {
-        BU98R10_0_SEG168 = SEG_LCD_OFF;  //Km
-        BU98R10_0_SEG169 = SEG_LCD_OFF;
-        BU98R10_0_SEG170 = SEG_LCD_OFF;
-        BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-        BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-        BU98R10_0_SEG147 = SEG_LCD_OFF;
-        BU98R10_0_SEG148 = SEG_LCD_OFF;
-        BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG143 = SEG_LCD_OFF;
-        BU98R10_0_SEG142 = SEG_LCD_OFF;
-        BU98R10_0_SEG152 = SEG_LCD_OFF;
-        BU98R10_0_SEG151 = SEG_LCD_OFF;
-        BU98R10_0_SEG145 = SEG_LCD_OFF;
-        BU98R10_0_SEG144 = SEG_LCD_OFF;
-        BU98R10_0_SEG141 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG138 = SEG_LCD_OFF;
-        BU98R10_0_SEG137 = SEG_LCD_OFF;
-        BU98R10_0_SEG136 = SEG_LCD_OFF;
-        BU98R10_0_SEG154 = SEG_LCD_OFF;
-        BU98R10_0_SEG153 = SEG_LCD_OFF;
-        BU98R10_0_SEG139 = SEG_LCD_OFF;
-        BU98R10_0_SEG140 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG128 = SEG_LCD_OFF;
-        BU98R10_0_SEG127 = SEG_LCD_OFF;
-        BU98R10_0_SEG157 = SEG_LCD_OFF;
-        BU98R10_0_SEG156 = SEG_LCD_OFF;
-        BU98R10_0_SEG155 = SEG_LCD_OFF;
-        BU98R10_0_SEG135 = SEG_LCD_OFF;
-        BU98R10_0_SEG114 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG111 = SEG_LCD_OFF;
-        BU98R10_0_SEG110 = SEG_LCD_OFF;
-        BU98R10_0_SEG160 = SEG_LCD_OFF;
-        BU98R10_0_SEG159 = SEG_LCD_OFF;
-        BU98R10_0_SEG158 = SEG_LCD_OFF;
-        BU98R10_0_SEG112 = SEG_LCD_OFF;
-        BU98R10_0_SEG113 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG108 = SEG_LCD_OFF;
-        BU98R10_0_SEG107 = SEG_LCD_OFF;
-        BU98R10_0_SEG163 = SEG_LCD_OFF;
-        BU98R10_0_SEG162 = SEG_LCD_OFF;
-        BU98R10_0_SEG161 = SEG_LCD_OFF;
-        BU98R10_0_SEG109 = SEG_LCD_OFF;
-        BU98R10_0_SEG106 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG104 = SEG_LCD_OFF;
-        BU98R10_0_SEG103 = SEG_LCD_OFF;
-        BU98R10_0_SEG167 = SEG_LCD_OFF;
-        BU98R10_0_SEG166 = SEG_LCD_OFF;
-        BU98R10_0_SEG165 = SEG_LCD_OFF;
-        BU98R10_0_SEG105 = SEG_LCD_OFF;
-        BU98R10_0_SEG102 = SEG_LCD_OFF;
-        
-        SEGLCDBackup.ODOMode = 0xFF;
-        SEGLCDBackup.ODOMileage = 0xFF;
-        SEGLCDBackup.ODOUnit = 0xFF;
-    }
-    SEGLCDBackup.ODOFaultCode = 0xFF;
-}
-
-void SEG_LCD_FaultCode_Display(uint8_t m_Flag, uint32_t FaultCodeDisp)
-{
-    uint8_t m_NUM[4];
-    uint32_t Num;
-    uint8_t m8;
-    
-    if (m_Flag == 1u)
-    {
-        BU98R10_0_SEG168 = SEG_LCD_OFF;
-        BU98R10_0_SEG169 = SEG_LCD_OFF;
-        BU98R10_0_SEG170 = SEG_LCD_OFF;
-        BU98R10_0_SEG164 = SEG_LCD_OFF;  //point
-        BU98R10_0_SEG146 = SEG_LCD_OFF;
-        BU98R10_0_SEG147 = SEG_LCD_OFF;
-        BU98R10_0_SEG148 = SEG_LCD_OFF;
-        BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG143 = SEG_LCD_OFF;
-        BU98R10_0_SEG142 = SEG_LCD_OFF;
-        BU98R10_0_SEG152 = SEG_LCD_OFF;
-        BU98R10_0_SEG151 = SEG_LCD_OFF;
-        BU98R10_0_SEG145 = SEG_LCD_OFF;
-        BU98R10_0_SEG144 = SEG_LCD_OFF;
-        BU98R10_0_SEG141 = SEG_LCD_OFF;
-        
-        BU98R10_0_SEG138 = SEG_LCD_LIGHT;  //P
-        BU98R10_0_SEG137 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG136 = SEG_LCD_OFF;
-        BU98R10_0_SEG154 = SEG_LCD_OFF;
-        BU98R10_0_SEG153 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG139 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG140 = SEG_LCD_LIGHT;
-
-        if (SEGLCDBackup.ODOFaultCode != FaultCodeDisp)
-        {
-            SEGLCDBackup.ODOFaultCode = FaultCodeDisp;
-            
-            Conv_Single_DECHEX(m_NUM, FaultCodeDisp);
-
-            /*千位*/
-            Num = m_NUM[3];
-            m8 = SEG_HEX_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG128 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG128 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG127 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG127 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG157 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG157 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG156 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG156 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG155 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG155 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG135 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG135 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG114 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG114 = SEG_LCD_OFF;
-            }
-            
-            /*百位*/
-            Num = m_NUM[2];
-            m8 = SEG_HEX_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG111 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG111 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG110 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG110 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG160 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG160 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG159 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG159 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG158 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG158 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG112 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG112 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG113 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG113 = SEG_LCD_OFF;
-            }
-
-            /*十位*/
-            Num = m_NUM[1];
-            m8 = SEG_HEX_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG108 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG108 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG107 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG107 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG163 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG163 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG162 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG162 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG161 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG161 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG109 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG109 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG106 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG106 = SEG_LCD_OFF;
-            }
-            /*个位*/
-            Num = m_NUM[0];
-            m8 = SEG_HEX_DISPLAY_NUMBER0[Num];
-            if (Bit_Is_Set(m8, 0))
-            {
-                BU98R10_0_SEG104 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG104 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 1))
-            {
-                BU98R10_0_SEG103 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG103 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 2))
-            {
-                BU98R10_0_SEG167 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG167 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 3))
-            {
-                BU98R10_0_SEG166 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG166 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 4))
-            {
-                BU98R10_0_SEG165 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG165 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 5))
-            {
-                BU98R10_0_SEG105 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG105 = SEG_LCD_OFF;
-            }
-            if (Bit_Is_Set(m8, 6))
-            {
-                BU98R10_0_SEG102 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                BU98R10_0_SEG102 = SEG_LCD_OFF;
-            }
-        }
-    }
-    else
-    {
-        BU98R10_0_SEG168 = SEG_LCD_OFF;  //Km
-        BU98R10_0_SEG169 = SEG_LCD_OFF;
-        BU98R10_0_SEG170 = SEG_LCD_OFF;
-        BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-        BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-        BU98R10_0_SEG147 = SEG_LCD_OFF;
-        BU98R10_0_SEG148 = SEG_LCD_OFF;
-        BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG143 = SEG_LCD_OFF;
-        BU98R10_0_SEG142 = SEG_LCD_OFF;
-        BU98R10_0_SEG152 = SEG_LCD_OFF;
-        BU98R10_0_SEG151 = SEG_LCD_OFF;
-        BU98R10_0_SEG145 = SEG_LCD_OFF;
-        BU98R10_0_SEG144 = SEG_LCD_OFF;
-        BU98R10_0_SEG141 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG138 = SEG_LCD_OFF;
-        BU98R10_0_SEG137 = SEG_LCD_OFF;
-        BU98R10_0_SEG136 = SEG_LCD_OFF;
-        BU98R10_0_SEG154 = SEG_LCD_OFF;
-        BU98R10_0_SEG153 = SEG_LCD_OFF;
-        BU98R10_0_SEG139 = SEG_LCD_OFF;
-        BU98R10_0_SEG140 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG128 = SEG_LCD_OFF;
-        BU98R10_0_SEG127 = SEG_LCD_OFF;
-        BU98R10_0_SEG157 = SEG_LCD_OFF;
-        BU98R10_0_SEG156 = SEG_LCD_OFF;
-        BU98R10_0_SEG155 = SEG_LCD_OFF;
-        BU98R10_0_SEG135 = SEG_LCD_OFF;
-        BU98R10_0_SEG114 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG111 = SEG_LCD_OFF;
-        BU98R10_0_SEG110 = SEG_LCD_OFF;
-        BU98R10_0_SEG160 = SEG_LCD_OFF;
-        BU98R10_0_SEG159 = SEG_LCD_OFF;
-        BU98R10_0_SEG158 = SEG_LCD_OFF;
-        BU98R10_0_SEG112 = SEG_LCD_OFF;
-        BU98R10_0_SEG113 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG108 = SEG_LCD_OFF;
-        BU98R10_0_SEG107 = SEG_LCD_OFF;
-        BU98R10_0_SEG163 = SEG_LCD_OFF;
-        BU98R10_0_SEG162 = SEG_LCD_OFF;
-        BU98R10_0_SEG161 = SEG_LCD_OFF;
-        BU98R10_0_SEG109 = SEG_LCD_OFF;
-        BU98R10_0_SEG106 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG104 = SEG_LCD_OFF;
-        BU98R10_0_SEG103 = SEG_LCD_OFF;
-        BU98R10_0_SEG167 = SEG_LCD_OFF;
-        BU98R10_0_SEG166 = SEG_LCD_OFF;
-        BU98R10_0_SEG165 = SEG_LCD_OFF;
-        BU98R10_0_SEG105 = SEG_LCD_OFF;
-        BU98R10_0_SEG102 = SEG_LCD_OFF;
-        
-        SEGLCDBackup.ODOFaultCode = 0xFF;
-    }
-    SEGLCDBackup.ODOMode = 0xFF;
-    SEGLCDBackup.ODOMileage = 0xFF;
-    SEGLCDBackup.ODOUnit = 0xFF;
-}
-void SEG_LCD_ODO_Trip_FaultCode_Selftest(uint8_t Mileage)
-{
-    uint32_t m_NUM;
-    uint32_t Num;
-    uint8_t m8;
-    
-    if (SEGLCDBackup.ODOMileage != Mileage)
-    {
-        SEGLCDBackup.ODOMode = 0xFF;
-        SEGLCDBackup.ODOUnit = 0xFF;
-        SEGLCDBackup.ODOMileage = Mileage;
-        
-        Mileage = Mileage > 9 ? 9 : Mileage;
-        m_NUM = Mileage % 10;// /10倍;         
-        
-        BU98R10_0_SEG168 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG169 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG170 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG164 = SEG_LCD_OFF;  //point
-        BU98R10_0_SEG146 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG147 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG148 = SEG_LCD_LIGHT;
-        BU98R10_0_SEG149 = SEG_LCD_LIGHT;
-
-        /*十万位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG143 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG143 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG142 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG142 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG152 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG152 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG151 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG151 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG145 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG145 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG144 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG144 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG141 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG141 = SEG_LCD_OFF;
-        }
-        /*万位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG138 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG138 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG137 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG137 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG136 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG136 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG154 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG154 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG153 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG153 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG139 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG139 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG140 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG140 = SEG_LCD_OFF;
-        }
-        /*千位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG128 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG128 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG127 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG127 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG157 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG157 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG156 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG156 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG155 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG155 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG135 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG135 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG114 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG114 = SEG_LCD_OFF;
-        }
-        /*百位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG111 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG111 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG110 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG110 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG160 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG160 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG159 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG159 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG158 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG158 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG112 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG112 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG113 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG113 = SEG_LCD_OFF;
-        }
-        /*十位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG108 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG108 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG107 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG107 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG163 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG163 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG162 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG162 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG161 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG161 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG109 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG109 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG106 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG106 = SEG_LCD_OFF;
-        }
-        /*个位*/
-        Num = m_NUM % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG104 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG104 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG103 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG103 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG167 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG167 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG166 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG166 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG165 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG165 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG105 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG105 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG102 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG102 = SEG_LCD_OFF;
-        }
-    }
-}
-extern uint8_t BatteryErrFlg;
-void SEG_LCD_BatteryErr_Display(uint8_t m_Flag, uint32_t ModeTime)
-{
-    uint8_t Mode;
-    
-    if (m_Flag == 1u)
-    {
-        if (ModeTime < 5000u)
-        {
-            Mode = 1;
-        }
-		else if((ModeTime >= 5000u) && (ModeTime < 6000u))
-		{
-			Mode = 0;
-		}
-        else if((ModeTime >= 6000) && (ModeTime < 11000))
-        {
-            Mode = 1;
-        }
-		else 
-		{
-			Mode = 0;
-			BatteryErrFlg = 0;
-		}
-        
-        if (SEGLCDBackup.ODOMode != Mode)
-        {
-            SEGLCDBackup.ODOMode = Mode;
-            
-            if (Mode == 1)
-            {
-                BU98R10_0_SEG168 = SEG_LCD_OFF;  //Km
-                BU98R10_0_SEG169 = SEG_LCD_OFF;
-                BU98R10_0_SEG170 = SEG_LCD_OFF;
-                BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-                BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-                BU98R10_0_SEG147 = SEG_LCD_OFF;
-                BU98R10_0_SEG148 = SEG_LCD_OFF;
-                BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG143 = SEG_LCD_OFF;
-                BU98R10_0_SEG142 = SEG_LCD_OFF;
-                BU98R10_0_SEG152 = SEG_LCD_OFF;
-                BU98R10_0_SEG151 = SEG_LCD_OFF;
-                BU98R10_0_SEG145 = SEG_LCD_OFF;
-                BU98R10_0_SEG144 = SEG_LCD_OFF;
-                BU98R10_0_SEG141 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG138 = SEG_LCD_OFF;
-                BU98R10_0_SEG137 = SEG_LCD_OFF;
-                BU98R10_0_SEG136 = SEG_LCD_OFF;
-                BU98R10_0_SEG154 = SEG_LCD_OFF;
-                BU98R10_0_SEG153 = SEG_LCD_OFF;
-                BU98R10_0_SEG139 = SEG_LCD_OFF;
-                BU98R10_0_SEG140 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG128 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG127 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG157 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG156 = SEG_LCD_OFF;
-                BU98R10_0_SEG155 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG135 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG114 = SEG_LCD_LIGHT;
-
-                BU98R10_0_SEG111 = SEG_LCD_OFF;
-                BU98R10_0_SEG110 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG160 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG159 = SEG_LCD_OFF;
-                BU98R10_0_SEG158 = SEG_LCD_OFF;
-                BU98R10_0_SEG112 = SEG_LCD_OFF;
-                BU98R10_0_SEG113 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG108 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG107 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG163 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG162 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG161 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG109 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG106 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG104 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG103 = SEG_LCD_OFF;
-                BU98R10_0_SEG167 = SEG_LCD_OFF;
-                BU98R10_0_SEG166 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG165 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG105 = SEG_LCD_LIGHT;
-                BU98R10_0_SEG102 = SEG_LCD_OFF;
-            }
-            else
-            {
-                BU98R10_0_SEG168 = SEG_LCD_OFF;  //Km
-                BU98R10_0_SEG169 = SEG_LCD_OFF;
-                BU98R10_0_SEG170 = SEG_LCD_OFF;
-                BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-                BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-                BU98R10_0_SEG147 = SEG_LCD_OFF;
-                BU98R10_0_SEG148 = SEG_LCD_OFF;
-                BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG143 = SEG_LCD_OFF;
-                BU98R10_0_SEG142 = SEG_LCD_OFF;
-                BU98R10_0_SEG152 = SEG_LCD_OFF;
-                BU98R10_0_SEG151 = SEG_LCD_OFF;
-                BU98R10_0_SEG145 = SEG_LCD_OFF;
-                BU98R10_0_SEG144 = SEG_LCD_OFF;
-                BU98R10_0_SEG141 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG138 = SEG_LCD_OFF;
-                BU98R10_0_SEG137 = SEG_LCD_OFF;
-                BU98R10_0_SEG136 = SEG_LCD_OFF;
-                BU98R10_0_SEG154 = SEG_LCD_OFF;
-                BU98R10_0_SEG153 = SEG_LCD_OFF;
-                BU98R10_0_SEG139 = SEG_LCD_OFF;
-                BU98R10_0_SEG140 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG128 = SEG_LCD_OFF;
-                BU98R10_0_SEG127 = SEG_LCD_OFF;
-                BU98R10_0_SEG157 = SEG_LCD_OFF;
-                BU98R10_0_SEG156 = SEG_LCD_OFF;
-                BU98R10_0_SEG155 = SEG_LCD_OFF;
-                BU98R10_0_SEG135 = SEG_LCD_OFF;
-                BU98R10_0_SEG114 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG111 = SEG_LCD_OFF;
-                BU98R10_0_SEG110 = SEG_LCD_OFF;
-                BU98R10_0_SEG160 = SEG_LCD_OFF;
-                BU98R10_0_SEG159 = SEG_LCD_OFF;
-                BU98R10_0_SEG158 = SEG_LCD_OFF;
-                BU98R10_0_SEG112 = SEG_LCD_OFF;
-                BU98R10_0_SEG113 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG108 = SEG_LCD_OFF;
-                BU98R10_0_SEG107 = SEG_LCD_OFF;
-                BU98R10_0_SEG163 = SEG_LCD_OFF;
-                BU98R10_0_SEG162 = SEG_LCD_OFF;
-                BU98R10_0_SEG161 = SEG_LCD_OFF;
-                BU98R10_0_SEG109 = SEG_LCD_OFF;
-                BU98R10_0_SEG106 = SEG_LCD_OFF;
-
-                BU98R10_0_SEG104 = SEG_LCD_OFF;
-                BU98R10_0_SEG103 = SEG_LCD_OFF;
-                BU98R10_0_SEG167 = SEG_LCD_OFF;
-                BU98R10_0_SEG166 = SEG_LCD_OFF;
-                BU98R10_0_SEG165 = SEG_LCD_OFF;
-                BU98R10_0_SEG105 = SEG_LCD_OFF;
-                BU98R10_0_SEG102 = SEG_LCD_OFF;
-            }
-
-            SEGLCDBackup.ODOMileage = 0xFF;
-            SEGLCDBackup.ODOUnit = 0xFF;
-        }
-    }
-    else
-    {
-        BU98R10_0_SEG168 = SEG_LCD_OFF;  //Km
-        BU98R10_0_SEG169 = SEG_LCD_OFF;
-        BU98R10_0_SEG170 = SEG_LCD_OFF;
-        BU98R10_0_SEG164 = SEG_LCD_OFF;  //Point
-        BU98R10_0_SEG146 = SEG_LCD_OFF;  //TOTAL
-        BU98R10_0_SEG147 = SEG_LCD_OFF;
-        BU98R10_0_SEG148 = SEG_LCD_OFF;
-        BU98R10_0_SEG149 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG143 = SEG_LCD_OFF;
-        BU98R10_0_SEG142 = SEG_LCD_OFF;
-        BU98R10_0_SEG152 = SEG_LCD_OFF;
-        BU98R10_0_SEG151 = SEG_LCD_OFF;
-        BU98R10_0_SEG145 = SEG_LCD_OFF;
-        BU98R10_0_SEG144 = SEG_LCD_OFF;
-        BU98R10_0_SEG141 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG138 = SEG_LCD_OFF;
-        BU98R10_0_SEG137 = SEG_LCD_OFF;
-        BU98R10_0_SEG136 = SEG_LCD_OFF;
-        BU98R10_0_SEG154 = SEG_LCD_OFF;
-        BU98R10_0_SEG153 = SEG_LCD_OFF;
-        BU98R10_0_SEG139 = SEG_LCD_OFF;
-        BU98R10_0_SEG140 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG128 = SEG_LCD_OFF;
-        BU98R10_0_SEG127 = SEG_LCD_OFF;
-        BU98R10_0_SEG157 = SEG_LCD_OFF;
-        BU98R10_0_SEG156 = SEG_LCD_OFF;
-        BU98R10_0_SEG155 = SEG_LCD_OFF;
-        BU98R10_0_SEG135 = SEG_LCD_OFF;
-        BU98R10_0_SEG114 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG111 = SEG_LCD_OFF;
-        BU98R10_0_SEG110 = SEG_LCD_OFF;
-        BU98R10_0_SEG160 = SEG_LCD_OFF;
-        BU98R10_0_SEG159 = SEG_LCD_OFF;
-        BU98R10_0_SEG158 = SEG_LCD_OFF;
-        BU98R10_0_SEG112 = SEG_LCD_OFF;
-        BU98R10_0_SEG113 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG108 = SEG_LCD_OFF;
-        BU98R10_0_SEG107 = SEG_LCD_OFF;
-        BU98R10_0_SEG163 = SEG_LCD_OFF;
-        BU98R10_0_SEG162 = SEG_LCD_OFF;
-        BU98R10_0_SEG161 = SEG_LCD_OFF;
-        BU98R10_0_SEG109 = SEG_LCD_OFF;
-        BU98R10_0_SEG106 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG104 = SEG_LCD_OFF;
-        BU98R10_0_SEG103 = SEG_LCD_OFF;
-        BU98R10_0_SEG167 = SEG_LCD_OFF;
-        BU98R10_0_SEG166 = SEG_LCD_OFF;
-        BU98R10_0_SEG165 = SEG_LCD_OFF;
-        BU98R10_0_SEG105 = SEG_LCD_OFF;
-        BU98R10_0_SEG102 = SEG_LCD_OFF;
-        
-        SEGLCDBackup.ODOMode = 0xFF;
-        SEGLCDBackup.ODOMileage = 0xFF;
-        SEGLCDBackup.ODOUnit = 0xFF;
-    }
-}
-
-/******************************************************************************
-��������SEG_Coolant_Temp_Display
-��  ��: ˮ�¶���ʾ    
-��  ��: 
-����ֵ��                               
-******************************************************************************/
-void SEG_Coolant_Temp_Display(uint8_t m_Flag, uint8_t Seg)
-{
-    if (m_Flag == 1)
-    {        
-        if (SEGLCDBackup.TempSeg != Seg)
-        {
-            SEGLCDBackup.TempSeg = Seg;
-
-            BU98R10_1_SEG45 = SEG_LCD_LIGHT;  //C
-            BU98R10_1_SEG38 = SEG_LCD_LIGHT;  //H
-
-            BU98R10_1_SEG44 = SEG_LCD_LIGHT;
-            BU98R10_1_SEG42 = SEG_LCD_LIGHT;
-            BU98R10_1_SEG33 = SEG_LCD_LIGHT;
-            BU98R10_1_SEG34 = SEG_LCD_LIGHT;
-            BU98R10_1_SEG36 = SEG_LCD_LIGHT;
-
-            BU98R10_1_SEG43  =  SEG_LCD_GRAY_2; //SEG5
-            BU98R10_1_SEG41  =  SEG_LCD_GRAY_2;
-            BU98R10_1_SEG40  =  SEG_LCD_GRAY_2;
-            BU98R10_1_SEG35  =  SEG_LCD_GRAY_2;
-            BU98R10_1_SEG37  =  SEG_LCD_GRAY_2;
-
-            switch(Seg)
-            {
-                case 9:  BU98R10_1_SEG41  =  SEG_LCD_LIGHT; //ShortCircuit
-                    BU98R10_1_SEG40  =  SEG_LCD_LIGHT; 
-                    BU98R10_1_SEG35  =  SEG_LCD_LIGHT;     
-                    break;         
-                case 8 :  BU98R10_1_SEG43  =  SEG_LCD_LIGHT; //OpenCircuit
-                    BU98R10_1_SEG37  =  SEG_LCD_LIGHT;  
-                    break;      
-                case 7 :  BU98R10_1_SEG43  =  SEG_LCD_LIGHT; //Not_Connect
-                    BU98R10_1_SEG41  =  SEG_LCD_LIGHT; 
-                    BU98R10_1_SEG40  =  SEG_LCD_LIGHT;  
-                    break;   
-                case 6 :  BU98R10_1_SEG35  =  SEG_LCD_LIGHT; //Not_Connect
-                    BU98R10_1_SEG37  =  SEG_LCD_LIGHT;    
-                    break;
-                case 5 :  BU98R10_1_SEG37  =  SEG_LCD_LIGHT; //SEG5
-                case 4 :  BU98R10_1_SEG35  =  SEG_LCD_LIGHT; 
-                case 3 :  BU98R10_1_SEG40  =  SEG_LCD_LIGHT; 
-                case 2 :  BU98R10_1_SEG41  =  SEG_LCD_LIGHT; 
-                case 1 :  BU98R10_1_SEG43  =  SEG_LCD_LIGHT; 
-                case 0 :  break;
-                default  : break;
-            }
-        }
-    }
-    else
-    {
-        BU98R10_1_SEG45 = SEG_LCD_OFF;  //C
-        BU98R10_1_SEG38 = SEG_LCD_OFF;  //H
-
-        BU98R10_1_SEG44 = SEG_LCD_OFF;
-        BU98R10_1_SEG42 = SEG_LCD_OFF;
-        BU98R10_1_SEG33 = SEG_LCD_OFF;
-        BU98R10_1_SEG34 = SEG_LCD_OFF;
-        BU98R10_1_SEG36 = SEG_LCD_OFF;
-
-        BU98R10_1_SEG43  =  SEG_LCD_GRAY_2; //SEG5
-        BU98R10_1_SEG41  =  SEG_LCD_GRAY_2;
-        BU98R10_1_SEG40  =  SEG_LCD_GRAY_2;
-        BU98R10_1_SEG35  =  SEG_LCD_GRAY_2;
-        BU98R10_1_SEG37  =  SEG_LCD_GRAY_2;
-
-        SEGLCDBackup.TempSeg = 0xff;
-    }
-}
-
-/******************************************************************************
-��������SEG_Fuel_Level_Display
-��  ��: ȼ�Ͷ���ʾ   
-��  ��: 
-����ֵ��                               
-******************************************************************************/
-void SEG_Fuel_Level_Display(uint8_t m_Flag, uint8_t Seg)
-{
-    if (m_Flag == 1)
-    {                
-        if (SEGLCDBackup.FuelSeg != Seg)
-        {
-            SEGLCDBackup.FuelSeg = Seg;
-
-            BU98R10_0_SEG126 = SEG_LCD_LIGHT;  //E
-            BU98R10_0_SEG115 = SEG_LCD_LIGHT;  //F
-
-            BU98R10_0_SEG124 = SEG_LCD_LIGHT;
-            BU98R10_0_SEG122 = SEG_LCD_LIGHT;
-            BU98R10_0_SEG120 = SEG_LCD_LIGHT;
-            BU98R10_0_SEG118 = SEG_LCD_LIGHT;
-            BU98R10_0_SEG116 = SEG_LCD_LIGHT;
-
-            BU98R10_0_SEG125  =  SEG_LCD_GRAY_2; //SEG5
-            BU98R10_0_SEG123  =  SEG_LCD_GRAY_2;
-            BU98R10_0_SEG121  =  SEG_LCD_GRAY_2;
-            BU98R10_0_SEG119  =  SEG_LCD_GRAY_2;
-            BU98R10_0_SEG117  =  SEG_LCD_GRAY_2;
-
-            switch(Seg)
-            {
-                case 7:  BU98R10_0_SEG123  =  SEG_LCD_LIGHT; //ShortCircuit
-                    BU98R10_0_SEG121  =  SEG_LCD_LIGHT; 
-                    BU98R10_0_SEG119  =  SEG_LCD_LIGHT;     
-                    break;         
-                case 6 :  BU98R10_0_SEG125  =  SEG_LCD_LIGHT; //OpenCircuit
-                    BU98R10_0_SEG117  =  SEG_LCD_LIGHT;  
-                    break;      
-                case 5 :  BU98R10_0_SEG117  =  SEG_LCD_LIGHT; //SEG5
-                case 4 :  BU98R10_0_SEG119  =  SEG_LCD_LIGHT; 
-                case 3 :  BU98R10_0_SEG121  =  SEG_LCD_LIGHT; 
-                case 2 :  BU98R10_0_SEG123  =  SEG_LCD_LIGHT; 
-                case 1 :  BU98R10_0_SEG125  =  SEG_LCD_LIGHT; 
-                case 0 :  break;
-                default  : break;
-            }
-        }
-    }
-    else
-    {
-        BU98R10_0_SEG126 = SEG_LCD_OFF;  //E
-        BU98R10_0_SEG115 = SEG_LCD_OFF;  //F
-
-        BU98R10_0_SEG124 = SEG_LCD_OFF;
-        BU98R10_0_SEG122 = SEG_LCD_OFF;
-        BU98R10_0_SEG120 = SEG_LCD_OFF;
-        BU98R10_0_SEG118 = SEG_LCD_OFF;
-        BU98R10_0_SEG116 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG125  =  SEG_LCD_GRAY_2; //SEG5
-        BU98R10_0_SEG123  =  SEG_LCD_GRAY_2;
-        BU98R10_0_SEG121  =  SEG_LCD_GRAY_2;
-        BU98R10_0_SEG119  =  SEG_LCD_GRAY_2;
-        BU98R10_0_SEG117  =  SEG_LCD_GRAY_2;
-
-        SEGLCDBackup.FuelSeg = 0xff;
-    }
-
-}
-
-/******************************************************************************
-��������SEG_LCD_Battery_Voltage_Display
-��  ��: ���복����ʾ    
-��  ��:
-����ֵ��                               
-******************************************************************************/
-void SEG_LCD_Battery_Voltage_Display(uint8_t m_Flag, uint8_t Voltage ,uint16_t VolCANset)
-{
-    uint8_t Num;
-    uint8_t m8;
-
-    if (m_Flag == 1)
-    {
-        PORT_SetBit(LightBATTCtrl);  //背光 ON
-
-        if ((SEGLCDBackup.Voltage != Voltage) || (SEGLCDBackup.VolCANset != VolCANset))
-        {
-            SEGLCDBackup.Voltage = Voltage;
-            SEGLCDBackup.VolCANset = VolCANset;
-
-            BU98R10_0_SEG61 = SEG_LCD_LIGHT;  //BATT
-            BU98R10_0_SEG52 = SEG_LCD_LIGHT;  //V
-            BU98R10_0_SEG94 = SEG_LCD_LIGHT;  //.
-
-            if(VolCANset == CAN_SIG_LOST)
-            {
-                BU98R10_0_SEG79 = SEG_LCD_OFF;
-                BU98R10_0_SEG78 = SEG_LCD_OFF;
-                BU98R10_0_SEG88 = SEG_LCD_OFF;
-                BU98R10_0_SEG87 = SEG_LCD_OFF;
-                BU98R10_0_SEG84 = SEG_LCD_OFF;
-                BU98R10_0_SEG82 = SEG_LCD_OFF;
-                BU98R10_0_SEG83 = SEG_LCD_LIGHT;
-
-                BU98R10_0_SEG67 = SEG_LCD_OFF;
-                BU98R10_0_SEG66 = SEG_LCD_OFF;
-                BU98R10_0_SEG93 = SEG_LCD_OFF;
-                BU98R10_0_SEG92 = SEG_LCD_OFF;
-                BU98R10_0_SEG89 = SEG_LCD_OFF;
-                BU98R10_0_SEG77 = SEG_LCD_OFF;
-                BU98R10_0_SEG65 = SEG_LCD_LIGHT;
-
-                BU98R10_0_SEG57 = SEG_LCD_OFF;
-                BU98R10_0_SEG56 = SEG_LCD_OFF;
-                BU98R10_0_SEG99 = SEG_LCD_OFF;
-                BU98R10_0_SEG98 = SEG_LCD_OFF;
-                BU98R10_0_SEG97 = SEG_LCD_OFF;
-                BU98R10_0_SEG60 = SEG_LCD_OFF;
-                BU98R10_0_SEG55 = SEG_LCD_LIGHT;
-            }
-            else
-            {
-                /*百位*/
-                Num = (Voltage / 100u) % 10u;
-                if (Voltage >= 1000u)
-                {
-                    m8 = SEG_DISPLAY_NUMBER0[Num];
-                }
-                else
-                {
-                    m8 = SEG_UNDISPLAY_NUMBER0[Num];
-                }
-
-                if (Bit_Is_Set(m8, 0))
-                {
-                    BU98R10_0_SEG79 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG79 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 1))
-                {
-                    BU98R10_0_SEG78 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG78 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 2))
-                {
-                    BU98R10_0_SEG88 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG88 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 3))
-                {
-                    BU98R10_0_SEG87 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG87 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 4))
-                {
-                    BU98R10_0_SEG84 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG84 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 5))
-                {
-                    BU98R10_0_SEG82 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG82 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 6))
-                {
-                    BU98R10_0_SEG83 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG83 = SEG_LCD_OFF;
-                }
-                /*十位*/
-                Num = (Voltage / 10u) % 10u;
-
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-
-                if (Bit_Is_Set(m8, 0))
-                {
-                    BU98R10_0_SEG67 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG67 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 1))
-                {
-                    BU98R10_0_SEG66 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG66 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 2))
-                {
-                    BU98R10_0_SEG93 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG93 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 3))
-                {
-                    BU98R10_0_SEG92 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG92 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 4))
-                {
-                    BU98R10_0_SEG89 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG89 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 5))
-                {
-                    BU98R10_0_SEG77 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG77 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 6))
-                {
-                    BU98R10_0_SEG65 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG65 = SEG_LCD_OFF;
-                }
-                /*个位*/
-                Num = Voltage % 10u;
-                m8 = SEG_DISPLAY_NUMBER0[Num];
-                if (Bit_Is_Set(m8, 0))
-                {
-                    BU98R10_0_SEG57 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG57 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 1))
-                {
-                    BU98R10_0_SEG56 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG56 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 2))
-                {
-                    BU98R10_0_SEG99 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG99 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 3))
-                {
-                    BU98R10_0_SEG98 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG98 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 4))
-                {
-                    BU98R10_0_SEG97 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG97 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 5))
-                {
-                    BU98R10_0_SEG60 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG60 = SEG_LCD_OFF;
-                }
-                if (Bit_Is_Set(m8, 6))
-                {
-                    BU98R10_0_SEG55 = SEG_LCD_LIGHT;
-                }
-                else
-                {
-                    BU98R10_0_SEG55 = SEG_LCD_OFF;
-                }
-            }
-        }
-    }
-    else
-    {
-        PORT_ClrBit(LightBATTCtrl);  //背光OFF
-
-        BU98R10_0_SEG61 = SEG_LCD_OFF;  //BATT
-        BU98R10_0_SEG52 = SEG_LCD_OFF;  //V
-        BU98R10_0_SEG94 = SEG_LCD_OFF;  //.
-
-        BU98R10_0_SEG79 = SEG_LCD_OFF;
-        BU98R10_0_SEG78 = SEG_LCD_OFF;
-        BU98R10_0_SEG88 = SEG_LCD_OFF;
-        BU98R10_0_SEG87 = SEG_LCD_OFF;
-        BU98R10_0_SEG84 = SEG_LCD_OFF;
-        BU98R10_0_SEG82 = SEG_LCD_OFF;
-        BU98R10_0_SEG83 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG67 = SEG_LCD_OFF;
-        BU98R10_0_SEG66 = SEG_LCD_OFF;
-        BU98R10_0_SEG93 = SEG_LCD_OFF;
-        BU98R10_0_SEG92 = SEG_LCD_OFF;
-        BU98R10_0_SEG89 = SEG_LCD_OFF;
-        BU98R10_0_SEG77 = SEG_LCD_OFF;
-        BU98R10_0_SEG65 = SEG_LCD_OFF;
-
-        BU98R10_0_SEG57 = SEG_LCD_OFF;
-        BU98R10_0_SEG56 = SEG_LCD_OFF;
-        BU98R10_0_SEG99 = SEG_LCD_OFF;
-        BU98R10_0_SEG98 = SEG_LCD_OFF;
-        BU98R10_0_SEG97 = SEG_LCD_OFF;
-        BU98R10_0_SEG60 = SEG_LCD_OFF;
-        BU98R10_0_SEG55 = SEG_LCD_OFF;
-
-        SEGLCDBackup.Voltage = 0xFFFF;
-        SEGLCDBackup.VolCANset = 0xFF;
-    }
-    
-}
-void SEG_LCD_Battery_Voltage_Selftest(uint8_t Voltage)
-{
-    uint8_t Num;
-    uint8_t m8;
-
-    PORT_SetBit(LightBATTCtrl);  //背光 ON
-    
-    if (SEGLCDBackup.Voltage != Voltage)
-    {
-        SEGLCDBackup.Voltage = Voltage;
-        SEGLCDBackup.VolCANset = 0xFF;
-
-        BU98R10_0_SEG61 = SEG_LCD_LIGHT;  //BATT
-        BU98R10_0_SEG52 = SEG_LCD_LIGHT;  //V
-        BU98R10_0_SEG94 = SEG_LCD_LIGHT;  //.
-
-        Voltage = Voltage > 9 ? 9 : Voltage;
-
-        /*百位*/
-        Num = Voltage % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG79 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG79 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG78 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG78 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG88 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG88 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG87 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG87 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG84 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG84 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG82 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG82 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG83 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG83 = SEG_LCD_OFF;
-        }
-        /*十位*/
-        Num = Voltage % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG67 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG67 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG66 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG66 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG93 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG93 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG92 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG92 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG89 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG89 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG77 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG77 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG65 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG65 = SEG_LCD_OFF;
-        }
-        /*个位*/
-        Num = Voltage % 10u;
-        m8 = SEG_DISPLAY_NUMBER0[Num];
-        if (Bit_Is_Set(m8, 0))
-        {
-            BU98R10_0_SEG57 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG57 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 1))
-        {
-            BU98R10_0_SEG56 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG56 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 2))
-        {
-            BU98R10_0_SEG99 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG99 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 3))
-        {
-            BU98R10_0_SEG98 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG98 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 4))
-        {
-            BU98R10_0_SEG97 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG97 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 5))
-        {
-            BU98R10_0_SEG60 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG60 = SEG_LCD_OFF;
-        }
-        if (Bit_Is_Set(m8, 6))
-        {
-            BU98R10_0_SEG55 = SEG_LCD_LIGHT;
-        }
-        else
-        {
-            BU98R10_0_SEG55 = SEG_LCD_OFF;
-        }
-    }
-}
-
-
-
-void SEG_LCD_OilPressure(uint8_t state)
-{
-    BU98R10_1_SEG32 =  state;
-}
-
-void SEG_LCD_TirePressure(uint8_t state)
-{
-    BU98R10_0_SEG150 =  state;
-}
-
-void SEG_LCD_READY(uint8_t state)
-{
-    BU98R10_1_SEG65 =  state;
-}
-
-void SEG_LCD_ABS(uint8_t state)
-{
-    BU98R10_0_SEG133 =  state;
-}
-
-void SEG_LCD_TSC(uint8_t state)
-{
-    BU98R10_1_SEG67 =  state;
-}
-
-void SEG_LCD_AutoStarStop(uint8_t state)
-{
-    BU98R10_1_SEG71 =  state;
-}
-
-void SEG_LCD_Batterylow(uint8_t state)
-{
-    BU98R10_1_SEG66 =  state;
-}
-
-void SEG_LCD_HI_BEAM(uint8_t state)
-{
-    BU98R10_1_SEG68 =  state;
-}
-
-void SEG_LCD_Shore(uint8_t state)
-{
-    BU98R10_0_SEG62 =  state;
-}
-
-void SEG_LCD_OBD(uint8_t state)
-{
-    BU98R10_0_SEG132 =  state;
-}
-
-void SEG_LCD_HighBeam(uint8_t state)
-{
-    BU98R10_0_SEG129 =  state;
-}
-
-void SEG_LCD_LeftTurn(uint8_t state)
-{
-    BU98R10_0_SEG131 =  state;
-}
-
-void SEG_LCD_RightTurn(uint8_t state)
-{
-    BU98R10_1_SEG69 =  state;
-}
-
-void SEG_LCD_Fuel(uint8_t state)
-{
-    BU98R10_0_SEG134 =  state;
-}
-
-void SEG_LCD_Temp(uint8_t state)
-{
-    BU98R10_1_SEG39 =  state;
-}

HJ232_Source/source/System/init.c

@@ -23,12 +23,11 @@
 #include "clk.h"
 #include "rtc.h"
 #include "can.h"
-#include "SEG_LCD.h"
 #include "eeManager_Interface.h"
 #include "Services_Mileage_User.h"
 #include "IS31_IIC_Master.h"
 #include "IS31FL3236.h"
-
+#include "Services_Mileage.h"
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /* Private macro -------------------------------------------------------------*/
@@ -101,13 +100,6 @@ void Sys_Startup_Init(void)
 
 	    Simulated_IIC_2_Init();
     IS31FL3236_Init();
-		SEG_LCD_Init(); 
-    SEG_LCD_Vehicle_Speed_Num_Display(0, 0, 0);
-		SEG_LCD_Engine_Speed_Seg_Display(0, 0, 0);
-		SEG_LCD_ODO_Trip_Display(0, 0, 0, 0);
-		SEG_Fuel_Level_Display(0, 0);
-    SEG_LCD_Battery_Voltage_Display(0, 0 ,0);
-		SEG_LCD_Gear_Display(0, 0, 0);
 
 
     Sys_Tick_Timer_Start();
@@ -124,7 +116,7 @@ void Sys_Startup_Init(void)
     Power_Management_Init(0u);
     bsp_CAN_Init();
     eeprom_StoreInfo_Init( );	//20221028
-    CalcODOKL30Init();
+
 		
 }
 

HJ232_Source/source/System/tasks.c

@@ -46,7 +46,8 @@
 #include "IS31FL3236.h"
 #include "IS31_IIC_Master.h"
 #include "app_Telltales.h"
-
+#include "Services_Mileage.h"
+#include "Gui_Seg_Dis.h"
 
 /*******************************************************************************
 *                                                                              *
@@ -55,7 +56,7 @@
 *******************************************************************************/
 
 /*==============================================================================
-伪实时任?
+伪实时任�?
 ------------------------------------------------------------------------------*/
 
 void Sys_Run_Mode_Pseudo_Real_Time_Tasks(void)
@@ -127,14 +128,14 @@ void Sys_Run_Mode_10ms_Tasks(void)
 //    Telltales_Left_Right_Management_Service();
 //    Key_Service();
 //    //CAN_BUSOFF_Recover();
-//    /*车?处?*/
+//    /*车�?�处�?*/
 //    SetGaugesPara(VehGauges, VehSpeedAmplification(Cal_Veh_Val()));
-//    /*转?处?*/
+//    /*转�?�处�?*/
 //    Common_Set_Act_E_Speed(Get_ID_CF00400_Sig_EngineSpeed() / 8);
 //    SetGaugesPara(RevGauges, RevSpeedManage(Common_Get_Act_E_Speed()));
 
 //    /*表头调度函数 added by yutian*/
-//    UserGaugeSchedule();/*在主循环中调?*/
+//    UserGaugeSchedule();/*在主循环中调�?*/
 //    /*end*/
 //    Sound_Play_Service();
 //    CD4051B_ReadSignal_Serviece();
@@ -148,7 +149,7 @@ void Sys_Run_Mode_10ms_Tasks(void)
 
         //if(Common_Get_IG_Sts() == COMMON_POWER_ON)
 				
-
+Data_Mileage_Write_EEPROM();
 }
 /*============================================================================*/
 
@@ -169,14 +170,14 @@ void Sys_Run_Mode_20ms_Tasks(void)
 	{
       if((Common_GetIgnOnTime() >= IGON_SelfcheckingTimer)&&(get_SEG_Check_Contrl() == 0))
 			{
-				//转?显?
+				//转�?�显�?
 				SEG_LCD_Engine_Speed_Seg_Display( Common_Get_Disp_E_Speed());
       }
     }*/
     
 	BU98R10_Update_Request();
 
-	//转?表头走?
+	//转�?�表头走�?
 	//Gauges_Management_Service();
     Diag_Req_Send(20);		
     IS31FL3236_Update();
@@ -203,7 +204,7 @@ void Sys_Run_Mode_50ms_Tasks(void)
     Flash_Sync_Signal_Generation_Service();
 
 
-    if(get_SEG_Check_Contrl() == 0)	CalcODO_50ms_Services();//20221117  TYW大计清零后，循环显示断码?? 停止大计/小计里程
+    
 
 //    Data_Time_Calibration();
 //    Data_Service_Gear_Processing();
@@ -252,7 +253,7 @@ void Sys_Run_Mode_100ms_Tasks_Group1(void)
 void Sys_Run_Mode_100ms_Tasks_Group2(void)
 {
 
-    /*车转速服务函?*/
+    /*车转速服务函�?*/
     CalcFreqData(100u);
 
     /*燃油计算*/
@@ -266,23 +267,50 @@ void Sys_Run_Mode_100ms_Tasks_Group3(void)
     CoolantTemp_Cal_Sevice(100u);
 
 }
+uint8_t GSDTEST = 0;
+uint32_t MileageArray[4] = {0};
 void Sys_Run_Mode_100ms_Tasks_Group4(void)
 {
     
 
+    uint8_t i = 0;
+
+    if(GSDTEST == 1)
+    {
+        Data_Mileage_Clear_GoOn();
+        for(i = 0;i<90;i++)
+        {
+            BU98R10Chip0DDRAM.Byte[i] = 0X77;
+            BU98R10Chip1DDRAM.Byte[i] = 0X77;
+        }
+    }
+    else
+    {
+        for(i = 0;i<90;i++)
+        {
+            BU98R10Chip0DDRAM.Byte[i] = 0;
+            BU98R10Chip1DDRAM.Byte[i] = 0;
+        }
+    }
+
+    MileageArray[0] = Data_ODO_Read();
+    MileageArray[1] = Data_Read_Trip(EM_TRIP_A);
+    MileageArray[2] = Data_Mileage_Readmm();
+MileageArray[3] = eeprom_getWriteState();
     /*获取RTC时间*/
     RTC_Service();
     
 
+Data_ODO_Processing();
     /*大计小计计算*/
-    CalcODO_100ms_Services();
+    Services_Mileage_Callback();
 	
 
 
 }
 void Sys_Run_Mode_100ms_Tasks_Group5(void)
 {
-    /*挡位??*/
+    /*挡位�?�?*/
     //Data_Service_Gear_Processing();
 
 }
@@ -305,7 +333,7 @@ void Sys_Run_Mode_100ms_Tasks_Group7(void)
     //CAN_Check_Liandian();
     ReqSilentTimer100mSService();
 
-    /*MIL灯超时计?*/
+    /*MIL灯超时计�?*/
     Can_User_Time_Service(100);
 
  }
@@ -321,12 +349,12 @@ void Sys_Run_Mode_100ms_Tasks_Group8(void)
 }
 void Sys_Run_Mode_100ms_Tasks_Group9(void)
 {	
-		/*?测断码屏数据是否异常*/
+		/*�?测断码屏数据是否异常*/
 		//if(Common_GetIgnOnTime() > 1000)
 		//checkSegTftState();
 
    
-    /* 临时测试程序 ?? */
+    /* 临时测试程序 �?�? */
     // tempodo = Data_ODO_Read( );
     // tempTripA = Data_Read_Trip(EM_TRIP_A);
     // tempTripB = Data_Read_Trip(EM_TRIP_B);
@@ -380,13 +408,13 @@ void Sys_Run_Mode_100ms_Tasks_Group10(void)
 //    else
 //    {
 //        Conmmon_Set_MotorModeStaFlag(4u);
-//        /*转?电机目标步赋??*/
+//        /*转�?�电机目标步赋�??*/
 //        if (bsp_GetMotorState(0) == Normal)
 //        {
 //            MeterPostion[0].destPosition = GetGaugesCurrentPos(RevGauges);
 //        }
 
-//        /*车?电机目标步赋??*/
+//        /*车�?�电机目标步赋�??*/
 //        if (bsp_GetMotorState(1) == Normal)
 //        {
 //            MeterPostion[1].destPosition = GetGaugesCurrentPos(VehGauges);
@@ -400,20 +428,20 @@ void Sys_Run_Mode_100ms_Tasks_Group10(void)
 //    //BL_Management_service();
 //    Popups_Management_Service();
 //    Popup_Scheduling_Service();
-//    /*综合油?信?*/
+//    /*综合油�?�信�?*/
 //    Data_FuelCounsComprehensive();
-//    /*小计油?信?*/
+//    /*小计油�?�信�?*/
 //    Data_FuelCounsumpTrip();
-//    /*本次油?信?*/
+//    /*本次油�?�信�?*/
 //    Data_FuelCounsumpThisTime();
-//    /*加油后行车信?*/
+//    /*加油后行车信�?*/
 //    Data_Info_Last_Refueling();
 
-//    /*当前油??*/
+//    /*当前油�??*/
 //    Fuel_CurrentFuelEco_Data();
-//    /*综合油??*/
+//    /*综合油�??*/
 //    Fuel_ComprehensiveFuelEco_Data();
-//    /*综合气??*/
+//    /*综合气�??*/
 //    Gas_ComprehensiveGasEco_Data();
 //    /*机油压力*/
 //    Oil_EngineOilPressure_Data();
@@ -436,11 +464,11 @@ void Sys_Sleep_Mode_Tasks(void)
 
 /*******************************************************************************
 *                                                                              *
-*                           精确?50us计时任务列表                             *
+*                           精确�?50us计时任务列表                             *
 *                                                                              *
 *******************************************************************************/
 /*==============================================================================
-精确?50us计时任务 禁止添加修改列表中的任务
+精确�?50us计时任务 禁止添加修改列表中的任务
 ------------------------------------------------------------------------------*/
 void Sys_Exact_50us_Tasks(void)
 {
@@ -450,11 +478,11 @@ void Sys_Exact_50us_Tasks(void)
 
 /*******************************************************************************
 *                                                                              *
-*                           精确?100ms计时任务列表                            *
+*                           精确�?100ms计时任务列表                            *
 *                                                                              *
 *******************************************************************************/
 /*==============================================================================
-精确?100ms计时任务 禁止添加修改列表中的任务
+精确�?100ms计时任务 禁止添加修改列表中的任务
 ------------------------------------------------------------------------------*/
 void Sys_Exact_100ms_Tasks(void)
 {