Merge branch 'LYK' into 'dev'

诊断增加DID，可读可写，修改22/2E/27服务，11服务复位前增加延时，QAC问题修改

See merge request !83

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -68,6 +68,7 @@ static void Power_KL30_Init(void)
 	g_stRTCInformation.u8RTCYear = 20; 
     RTE_RTC_Init(g_stRTCInformation);
     Menu_User_Init();
+    UDS_Startup_Init();
     Can_Init();
     Protocol_KL30_Wakeup_Init();
     TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 500);

Firmware/Source/Device/Cmsemicon/BAT32A279/Library/Driver/include/flash.h

@@ -2,7 +2,7 @@
 #define __FLASH_H__
 #include <stdint.h>
 #include "common.h"
-#define SECTOR_SIZE 512
+#define SECTOR_SIZE 1024
 #define WORD_SIZE 4
 //#define FLASH_PROTCET
 #define PROTECT_VALUE	((uint32_t)0x1234ABCD)

Firmware/Source/Device/Cmsemicon/BAT32A279/Library/Driver/src/flash.c

@@ -61,12 +61,12 @@ int EraseChip (uint32_t adr)
 * @param  adr - sector address of user code flash
 * @return status: 0 - OK, 1 - Failed
 ***********************************************************************************************************************/
-int EraseSector (uint32_t adr)
+int EraseSector(uint32_t adr)
 {
 #ifdef FLASH_PROTCET
-	if(flash_protect_flag != PROTECT_VALUE)
+    if (flash_protect_flag != PROTECT_VALUE)
     {
-		return(1);		
+        return (1);
     }
     flash_protect_flag = 0;
 #endif
@@ -76,25 +76,31 @@ int EraseSector (uint32_t adr)
     FMC->FLOPMD1 = 0x55;
     FMC->FLOPMD2 = 0xAA;
     // Write data to start address of sector to trigger Erase Operation
-    *(uint32_t *) adr = 0xFFFFFFFF;
+    *(uint32_t *)adr = 0xFFFFFFFF;
 
     // polling Erase Over Flag
-    while((FMC->FLSTS & FMC_FLSTS_OVF_Msk) == 0);
+    while ((FMC->FLSTS & FMC_FLSTS_OVF_Msk) == 0)
+    {
+        ;
+    }
     FMC->FLSTS = FMC_FLSTS_OVF_Msk;
     FMC->FLERMD = 0x00;
     FMC->FLPROT = 0xF0;
 
-    if(FMC->FLSTS & FMC_FLSTS_EVF_Msk)
+    /* if(FMC->FLSTS & FMC_FLSTS_EVF_Msk)
     {
         FMC->FLSTS = FMC_FLSTS_EVF_Msk;
         __EI;
-        return(1);  /* verify ng */
+        return(1);
     }
     else
     {
         __EI;
-        return(0);  /* verify ok */
-    }
+        return(0);
+    } */
+
+    __EI;
+    return 0;
 }
 
 /***********************************************************************************************************************

Firmware/Source/UDS/UDS_ISO14229_Server.c

@@ -203,11 +203,13 @@ void UDS_S_Data_Indication(uint16_t S_TAtype, uint8_t *S_Data, uint16_t S_Length
 返回值：无  SYSC0_RUNPLL2CNTR
 ******************************************************************************/
 extern uint8_t S3_Server_refresh;
+extern uint8_t S3_ServerEN;
+extern uint8_t SessionType;
 void UDS_Process_Service_Request(void)
 {
     if (UDS_APP_RX.A_PDU.New)
     {
-        S3_Server_refresh = 1;
+        S3_ServerEN = 0; // 收到消息时，暂停S3Timer
         switch (UDS_APP_RX.A_PDU.A_PCI.SI)
         {
         case 0x10: UDS_Service_10_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
@@ -218,11 +220,11 @@ void UDS_Process_Service_Request(void)
                 UDS_Service_22_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             }
             break;
-        /* case 0x2E: UDS_Service_2E_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
-            break;
         case 0x27: UDS_Service_27_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             break;
-        case 0x28: UDS_Service_28_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
+        case 0x2E: UDS_Service_2E_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
+            break;
+        /* case 0x28: UDS_Service_28_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             break;
         case 0x85: UDS_Service_85_Indication(UDS_APP_RX.A_PDU.TA_type, UDS_APP_RX.A_PDU.Length, UDS_APP_RX.A_PDU.Data);
             break; */
@@ -239,6 +241,12 @@ void UDS_Process_Service_Request(void)
             break;
         }
         UDS_APP_RX.A_PDU.New = 0;
+
+        if(SessionType > DefaultSession) // 非默认会话时执行
+        {
+            S3_Server_refresh = 1; // 诊断请求处理完成, 刷新S3Timer
+            S3_ServerEN = 1; // 消息处理完成，恢复S3Timer计时
+        }
     }
 }
 

Firmware/Source/UDS/UDS_ISO14229_Services.h

@@ -47,6 +47,8 @@
 #define FLASH_APP_RODATA_INFO  (0x00501C00UL) /* 存储只读DID信息 */
 #define FLASH_APP_RWDATA_INFO  (0x00502000UL) /* 存储可写的DID信息 */
 
+#define FLASH_PAGE_SIZE    (0x400UL) /* FLASH 页面大小 */
+
 #define Data_Flash_Addr_BootValid_OFFSET   0x00000000
 #define Data_Flash_Addr_DiagReceive_OFFSET 0x00002000
 #define Data_Flash_Addr_Diag2E_OFFSET      0x00004000
@@ -56,6 +58,8 @@
 #define Jump_To_Boot_No_Answer             0xA77A8AA8
 #define Flag_App_OTAStatus                 0x3663B88B    // ����Boot��ԭ������ΪOTA
 
+#define FLAG_APP_FLAG           (0xA77A5AA5U) /* 表示APP标识已写入 */
+
 #define EnableInterrupts \
     {                    \
         __asm CLI;       \
@@ -176,8 +180,6 @@
 // #define sendKey_LV11      0x12
 #define NormalKeyUnlock   0x01
 #define NormalKeyLock     0x00
-#define BootKeyUnlock     0x02
-#define BootKeyLock       0x00
 #define RequestSeedMaxCnt 0x04
 #define AttemptMaxCnt     0x03
 
@@ -338,26 +340,45 @@ typedef struct
     uint8_t OpCode;
 } DiagSendDataNeg;
 
-void UDS_Service_10_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
-void UDS_Service_11_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
-void UDS_Service_22_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
-void UDS_Service_3E_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
-void S3_ServerCNTT(void);
-extern void DIAG_InitParameter(void);
+typedef struct
+{
+    uint32_t Flag;
+
+    uint8_t DID_5000[32]; /* programming date */
+
+    // uint8_t fill_data[17]; /* 用于保证该结构体长度是4的倍数 */
+} Diag_Write_Data_t;
+
+extern void UDS_Service_10_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void UDS_Service_11_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void UDS_Service_22_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void UDS_Service_27_Indication(uint32_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void UDS_Service_2E_Indication(uint32_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void UDS_Service_3E_Indication(uint16_t A_TA_type, uint16_t A_Length, uint8_t *A_Data);
+extern void S3_ServerCNTT(void);
+
+extern void UDS_Normal_Init(void);
+extern void UDS_Startup_Init(void);
 
 typedef void (*InitFunction)(void);
 
 /***********Local Functin*************/
-uint8_t GetCurrentSession(void);
-uint8_t SerXXNRC12Filter(uint8_t insub, const uint8_t *supportsub, uint8_t size, uint8_t *index);
-uint8_t SerXXNRC13Filter(uint8_t type, uint8_t serlength, const uint8_t *length, uint8_t index);
-uint8_t SerXXNRC22Filter(void);
-uint8_t SerXXNRC31DIDFilter(uint16_t inDID, const uint16_t *DIDList, uint8_t size, uint8_t *index);
-uint8_t SerXXNRC7EFilter(const uint8_t *SubSupportSession, uint8_t index);
-uint8_t SerXXNRC7FFilter(uint8_t SupportSession);
-void Write_App_InValid(uint32_t m32);
+extern uint8_t GetCurrentSession(void);
+extern uint8_t SerXXNRC12Filter(uint8_t insub, const uint8_t *supportsub, uint8_t size, uint8_t *index);
+extern uint8_t SerXXNRC13Filter(uint8_t type, uint8_t serlength, const uint8_t *length, uint8_t index);
+extern uint8_t SerXXNRC22Filter(void);
+extern uint8_t SerXXNRC31DIDFilter(uint16_t inDID, const uint16_t *DIDList, uint8_t size, uint8_t *index);
+extern uint8_t SerXXNRC7EFilter(const uint8_t *SubSupportSession, uint8_t index);
+extern uint8_t SerXXNRC7FFilter(uint8_t SupportSession);
+extern void Write_App_InValid(uint32_t m32);
 
 extern void Get_Into_630H_Update_MCU_Mode(void);
 extern void Check_MCU_Info_in_630H(void);
 
+extern void Ser27_CreateRandomSeed(void);
+extern uint32_t CalculateKey(uint8_t seed_array[]);
+extern uint32_t Combine_U8_Into_U32(uint8_t *U8);
+extern uint8_t Write_Data_Flash(uint32_t addr, uint32_t size, uint8_t *data);
+extern void erase_memory(uint32_t start_addr, uint32_t end_addr);
+
 #endif