✨ feat:新增日间夜间模式，日间以手机闪光灯亮度为基准，在夜间模式下，当手机闪光灯照射1.5秒后进入日间模式，关闭手机闪光灯1.5秒后进入夜间模式

Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/RTE/Device/BAT32A279KM64FB/userdefine.h

@@ -20,7 +20,7 @@ User definitions
 
 typedef unsigned short 	MD_STATUS;
 
-#define HAS_BOOTLOADER (1u) // 仅仿真App时设置为0
+#define HAS_BOOTLOADER (0u) // 仅仿真App时设置为0
 #define APP_BASE (0x0000C400ul)
 
 /* Status list definition */

Firmware/Source/Application/BackLight.c

 #include "Backlight.h"
 #include "Components.h"
 
+#define LIGHT_DATA_TIME 10u /*这里填写多长时间采集一个数据，单位ms*/
+#define LIGHT_DATA_NUM 20u  /*燃油电阻采集数据总数 最大255*/
+#define LIGHT_CAL_START 5u  /*数据排序后取中间部分计算平均：起始*/
+#define LIGHT_CAL_END 15u   /*数据排序后取中间部分计算平均：结束*/
+Light_uint8_t LightADCompleteFlg = 0u;
+Light_uint16_t LightR = 0u;
+Light_uint16_t LightR_Status = 0;
+Light_uint16_t LightR_Status_Count = 0u;
+Light_uint16_t NtcDataCount;
+Light_uint16_t NtcData[LIGHT_DATA_NUM];
 typedef struct
 {
     Light_uint16_t Temperature; /* 温度 */
@@ -41,6 +51,96 @@ _st_BacklightLevel BacklightLevelTable[BacklightLevel_Max] =
 
 };
 
+void Data_Light_Res_service(Light_uint8_t deltaTime)//获取光感阻值，并做平均
+{
+    uint16_t LightRes = 0;
+    uint8_t i, j;
+    uint32_t temp32;
+    static uint16_t timeCount = 0;
+
+    if (timeCount >= LIGHT_DATA_TIME)
+    {
+        timeCount = 0;
+        if (NtcDataCount < LIGHT_DATA_NUM)
+        {
+            /*获取光敏电阻*/
+            LightRes = ADC_Read_Signal(ADC_CH_LIGHT_SENSITIVE); // ADC_Read_Signal(ADC_CH_FUEL1);
+
+            /*四舍五入*/
+            if (LightRes < 32000)
+            {
+                if (LightRes % 10 >= 5)
+                {
+                    LightRes += 5;
+                }
+            }
+            else
+            {
+                LightRes = 32000;
+            }
+            /*由小到大插入数据*/
+            for (i = 0; i < NtcDataCount; i++)
+            {
+                if (LightRes < NtcData[i])
+                {
+                    break;
+                }
+            }
+            for (j = NtcDataCount; j > i; j--)
+            {
+                NtcData[j] = NtcData[j - 1];
+            }
+            NtcData[i] = LightRes;
+            NtcDataCount++;
+        }
+        else
+        {
+            /*一组数据采集完毕，取中间部分计算平均值*/
+            temp32 = 0;
+            for (i = LIGHT_CAL_START; i < LIGHT_CAL_END; i++)
+            {
+                temp32 += NtcData[i];
+            }
+            LightR = (uint16_t) (temp32 / (LIGHT_CAL_END - LIGHT_CAL_START));
+            NtcDataCount = 0;
+            LightADCompleteFlg = 1;
+        }
+    }
+    timeCount += deltaTime;
+    
+    if(LightADCompleteFlg)
+    {
+        if(LightR_Status == 0)
+        {
+            if(LightR >20)
+            {
+                LightR_Status_Count++;
+            }
+            else
+            {
+                LightR_Status_Count = 0 ;
+            }            
+        }
+        else
+        {
+            if(LightR <20)
+            {
+                LightR_Status_Count++;
+            }
+            else
+            {
+                LightR_Status_Count = 0 ;
+            }          
+        }
+
+        if(LightR_Status_Count>=150)
+        {
+            LightR_Status_Count = 0;
+            LightR_Status = !LightR_Status;
+        }            
+    }
+}
+
 
 
 Light_uint16_t GetBacklightDutyByLevel(Light_uint16_t level)

Firmware/Source/Component/Analog/Analog_Signals.c

@@ -74,7 +74,7 @@ ADC_Data_st_t     stADCData[ADC_SIGNAL_CH_NUMBER];
 
 const uint8_t __attribute__((aligned(4))) u8ADCChList[ADC_CONV_CH_NUMBER] =
 {
-     2U,  3U,  7U,  5U,  6U, 
+     2U,  3U,  7U,  5U,  6U, 4U, 12U,
 };
 
 const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
@@ -84,6 +84,9 @@ const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBE
     {  2U,   0U,   0U,     0U,     0U,     1U,  ADC_Voltage_Calc_Circuit101,},
     {  3U,   2U,   0U,     2U,     0U,     1U,      ADC_Res_Calc_Circuit101,},
     {  4U,   2U,   0U,     2U,     0U,     1U,      ADC_Res_Calc_Circuit101,},
+    {  5U,   3U,   0U,  5000U,     0U,    10U,      ADC_Res_Calc_Circuit201,},
+    {  6U,   2U,   0U,     2U,     0U,     1U,      ADC_Res_Calc_Circuit101,},    
+
 };
 
 const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
@@ -93,6 +96,8 @@ const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_N
     {          0U,         0U,         0U,         0U,},
     {          0U,         0U,       500U,       300U,},
     {          0U,         0U,       500U,         0U,},
+    {      47000U,         0U,    100000U,         0U,},
+     {          0U,         0U,      500U,         0U,},
 };
 
 /* Private function prototypes ----------------------------------------------*/
@@ -170,7 +175,7 @@ void Analog_Signal_Conv_Service(void)
 
                                 if (stADCCtrl.u8DebounceCnt == 0U)
                                 {
-                                    stADCCtrl.enStatus = ADC_STAT_CONV;
+                                    stADCCtrl.enStatus = ADC_STAT_CONV; 
                                 }
                                 else
                                 {

Firmware/Source/Component/Analog/Analog_Signals.h

@@ -33,11 +33,13 @@ enum ADCChName
     ADC_CH_FUEL_VREF,
     ADC_CH_FUEL1,
     ADC_CH_COOLANT_TEMP1_R,
+    ADC_CH_NTC_TEMP,
+    ADC_CH_LIGHT_SENSITIVE,
 };
 
 /* Exported macro ------------------------------------------------------------*/
-#define   ADC_TOTAL_CH_NUMBER               (5U)
-#define   ADC_SIGNAL_CH_NUMBER              (5U)
+#define   ADC_TOTAL_CH_NUMBER               (7U)
+#define   ADC_SIGNAL_CH_NUMBER              (7U)
 #define   ADC_REF_VOLTAGE                   u16ADCRefVoltage
 
 /* Exported variables --------------------------------------------------------*/

Firmware/Source/System/Sys_Task_List.c

@@ -37,6 +37,7 @@ void Sys_10ms_Tasks(void)
     Key_TimeOut_Service();
     Fuel_R_Cal(10u);
     Coolant_R_Cal(10u);
+    Data_Light_Res_service(10);
 }
 
 void Sys_20ms_Tasks(void)