✨ feat:修改串口计数和数据长度

Firmware/Source/Device/Cmsemicon/BAT32A279/RTE/UART/RTE_UART.c

@@ -12,8 +12,8 @@ void     RTE_UART_Sleep_Init(UART_Channel_en_t enUARTCh);
 /*******************************************************/
 typedef struct
 {
-    uint8_t  u8UARTCount;      /*发送计数*/
-    uint8_t  u8UARTLEN;        /*发送数据总长*/
+    uint32_t  u32UARTCount;      /*发送计数*/
+    uint32_t  u32UARTLEN;        /*发送数据总长*/
     uint8_t  u8UARTTXBusyFlag; /*发送是否忙标志  0:idle  1:busy */
     uint8_t *pu8UARTDataBuf;   /*要发送数据的指针*/
 } UART_Ctr_st_t;
@@ -33,8 +33,8 @@ static UART_Channel_Config_st_t stUARTCh2Cfg;
 static void RTE_UART_Variate_Init(void);
 static void RTE_UART_Variate_Init(void)
 {
-    stUARTCtr0.u8UARTCount      = 0U;
-    stUARTCtr0.u8UARTLEN        = 0U;
+    stUARTCtr0.u32UARTCount      = 0U;
+    stUARTCtr0.u32UARTLEN        = 0U;
     stUARTCtr0.u8UARTTXBusyFlag = 0U;
     stUARTCtr0.pu8UARTDataBuf   = 0U;
 
@@ -43,8 +43,8 @@ static void RTE_UART_Variate_Init(void)
     stUARTCh0Cfg.pfnUARTConfirmCallBack = 0U;
     stUARTCh0Cfg.pfnUARTReadMsgCallBack = 0U;
 
-    stUARTCtr1.u8UARTCount      = 0U;
-    stUARTCtr1.u8UARTLEN        = 0U;
+    stUARTCtr1.u32UARTCount      = 0U;
+    stUARTCtr1.u32UARTLEN        = 0U;
     stUARTCtr1.u8UARTTXBusyFlag = 0U;
     stUARTCtr1.pu8UARTDataBuf   = 0U;
 
@@ -53,8 +53,8 @@ static void RTE_UART_Variate_Init(void)
     stUARTCh1Cfg.pfnUARTConfirmCallBack = 0U;
     stUARTCh1Cfg.pfnUARTReadMsgCallBack = 0U;
 
-    stUARTCtr2.u8UARTCount      = 0U;
-    stUARTCtr2.u8UARTLEN        = 0U;
+    stUARTCtr2.u32UARTCount      = 0U;
+    stUARTCtr2.u32UARTLEN        = 0U;
     stUARTCtr2.u8UARTTXBusyFlag = 0U;
     stUARTCtr2.pu8UARTDataBuf   = 0U;
 
@@ -288,8 +288,8 @@ void UART_Ch0_Send_Multiple_Byte(uint8_t *Data, uint8_t Len)
 {
     if ( UART_Ch0_Get_TX_Busy_Flag( ) == 0U )
     {
-        stUARTCtr0.u8UARTCount      = 1U;
-        stUARTCtr0.u8UARTLEN        = Len;
+        stUARTCtr0.u32UARTCount      = 1U;
+        stUARTCtr0.u32UARTLEN        = Len;
         stUARTCtr0.u8UARTTXBusyFlag = 1U;
         stUARTCtr0.pu8UARTDataBuf   = Data;
         UART0_TX                  = stUARTCtr0.pu8UARTDataBuf [ 0U ];
@@ -299,8 +299,8 @@ void UART_Ch1_Send_Multiple_Byte(uint8_t *Data, uint8_t Len)
 {
     if ( UART_Ch1_Get_TX_Busy_Flag( ) == 0U )
     {
-        stUARTCtr1.u8UARTCount      = 1U;
-        stUARTCtr1.u8UARTLEN        = Len;
+        stUARTCtr1.u32UARTCount      = 1U;
+        stUARTCtr1.u32UARTLEN        = Len;
         stUARTCtr1.u8UARTTXBusyFlag = 1U;
         stUARTCtr1.pu8UARTDataBuf   = Data;
         UART1_TX                  = stUARTCtr1.pu8UARTDataBuf [ 0U ];
@@ -310,8 +310,8 @@ void UART_Ch2_Send_Multiple_Byte(uint8_t *Data, uint8_t Len)
 {
     if ( UART_Ch2_Get_TX_Busy_Flag( ) == 0U )
     {
-        stUARTCtr2.u8UARTCount      = 1U;
-        stUARTCtr2.u8UARTLEN        = Len;
+        stUARTCtr2.u32UARTCount      = 1U;
+        stUARTCtr2.u32UARTLEN        = Len;
         stUARTCtr2.u8UARTTXBusyFlag = 1U;
         stUARTCtr2.pu8UARTDataBuf   = Data;
         UART2_TX                  = stUARTCtr2.pu8UARTDataBuf [ 0U ];
@@ -419,9 +419,9 @@ void UART_CH3_RX_ISR(void)
 void UART_CH0_TX_ISR(void)
 {
     INTC_ClearPendingIRQ(ST0_IRQn);
-    if ( stUARTCtr0.u8UARTCount < stUARTCtr0.u8UARTLEN )
+    if ( stUARTCtr0.u32UARTCount < stUARTCtr0.u32UARTLEN )
     {
-        UART0_TX = stUARTCtr0.pu8UARTDataBuf [ stUARTCtr0.u8UARTCount++ ];
+        UART0_TX = stUARTCtr0.pu8UARTDataBuf [ stUARTCtr0.u32UARTCount++ ];
     }
     else
     {
@@ -435,9 +435,9 @@ void UART_CH0_TX_ISR(void)
 void UART_CH1_TX_ISR(void)
 {
     INTC_ClearPendingIRQ(ST1_IRQn);
-    if ( stUARTCtr1.u8UARTCount < stUARTCtr1.u8UARTLEN )
+    if ( stUARTCtr1.u32UARTCount < stUARTCtr1.u32UARTLEN )
     {
-        UART1_TX = stUARTCtr1.pu8UARTDataBuf [ stUARTCtr1.u8UARTCount++ ];
+        UART1_TX = stUARTCtr1.pu8UARTDataBuf [ stUARTCtr1.u32UARTCount++ ];
     }
     else
     {
@@ -451,9 +451,9 @@ void UART_CH1_TX_ISR(void)
 void UART_CH2_TX_ISR(void)
 {
     INTC_ClearPendingIRQ(ST2_IRQn);
-    if ( stUARTCtr2.u8UARTCount < stUARTCtr2.u8UARTLEN )
+    if ( stUARTCtr2.u32UARTCount < stUARTCtr2.u32UARTLEN )
     {
-        UART2_TX = stUARTCtr2.pu8UARTDataBuf [ stUARTCtr2.u8UARTCount++ ];
+        UART2_TX = stUARTCtr2.pu8UARTDataBuf [ stUARTCtr2.u32UARTCount++ ];
     }
     else
     {