✨ feat:增加背光NTC部分代码，功能已应用

Firmware/Source/Application/BackLight.c

 #include "Backlight.h"
 #include "Components.h"
 
-#define BACK_LIGHT_Val_1 100
-#define BACK_LIGHT_Val_2 300
-#define BACK_LIGHT_Val_3 500
-#define BACK_LIGHT_Val_4 700
-#define BACK_LIGHT_Val_5 900
+typedef void (*SetPwm)(Light_uint16_t Pwm);
+typedef Light_uint8_t (*SetPwmEnable)(void);
+typedef Light_uint8_t (*SetPwmLevel)(void);
+typedef Light_uint16_t (*NtcRes)(void);
+
+typedef struct
+{
+    SetPwm SetPwmCbk;           /* 设置PWM回调函数 */
+    SetPwmEnable SetPwmEnCbk;   /* 设置PWM使能回调函数 */
+    SetPwmLevel SetPwmLevelCbk; /* 背光等级回调函数 */
+    NtcRes NtcResCbk;           /* 获取电阻值回调函数 */
+} BackLightExtPara;
+
+typedef struct
+{
+    SetPwm SetPwmCbk;           /* 设置PWM回调函数 */
+    SetPwmEnable SetPwmEnCbk;   /* 设置PWM使能回调函数 */
+    SetPwmLevel SetPwmLevelCbk; /* 背光等级回调函数 */
+    NtcRes NtcResCbk;
+    Light_uint8_t BacklightEn;     /* 背光使能 */
+    Light_uint16_t BacklightPwm;   /* 背光PWM */
+    Light_uint16_t BacklightLevel; /* 背光等级 */
+} _Backlight_Op;
+
+_Backlight_Op Backlight_Operate;
+
+#define BACK_LIGHT_Val_1 (( 100 * Backlight_Operate.BacklightPwm ) / 100 )
+#define BACK_LIGHT_Val_2 (( 200 * Backlight_Operate.BacklightPwm ) / 100 )
+#define BACK_LIGHT_Val_3 (( 400 * Backlight_Operate.BacklightPwm ) / 100 )
+#define BACK_LIGHT_Val_4 (( 600 * Backlight_Operate.BacklightPwm ) / 100 )
+#define BACK_LIGHT_Val_5 (( 800 * Backlight_Operate.BacklightPwm ) / 100 )
 
 #define LIGHT_DATA_TIME 10u /*这里填写多长时间采集一个数据，单位ms*/
 #define LIGHT_DATA_NUM 20u  /*燃油电阻采集数据总数 最大255*/
@@ -136,11 +162,11 @@ void Data_Light_Res_service(Light_uint8_t deltaTime)//获取光感阻值，并
             }
             if(LightR_Status == 0)
             {
-                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 200);                            
+                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_2);                            
             }
             else
             {
-                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 800); 
+                TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_5); 
             }
         }
     }
@@ -148,23 +174,23 @@ void Data_Light_Res_service(Light_uint8_t deltaTime)//获取光感阻值，并
     {
         if(Backlight_SetPwmLevel() == 1U)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 100);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_1);
         }
         else if(Backlight_SetPwmLevel() == 2U)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 200);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_2);
         }
         else if(Backlight_SetPwmLevel() == 3U)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 400);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_3);
         }
         else if(Backlight_SetPwmLevel() == 4U)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 600);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_4);
         }
         else if(Backlight_SetPwmLevel() == 5U)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 800);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_5);
         }
     }
     else
@@ -187,31 +213,8 @@ Light_uint16_t GetBacklightDutyByLevel(Light_uint16_t level)
     return 0;
 }
 
-typedef void (*SetPwm)(Light_uint16_t Pwm);
-typedef Light_uint8_t (*SetPwmEnable)(void);
-typedef Light_uint8_t (*SetPwmLevel)(void);
-typedef Light_uint16_t (*NtcRes)(void);
-
-typedef struct
-{
-    SetPwm SetPwmCbk;           /* 设置PWM回调函数 */
-    SetPwmEnable SetPwmEnCbk;   /* 设置PWM使能回调函数 */
-    SetPwmLevel SetPwmLevelCbk; /* 背光等级回调函数 */
-    NtcRes NtcResCbk;           /* 获取电阻值回调函数 */
-} BackLightExtPara;
 
-typedef struct
-{
-    SetPwm SetPwmCbk;           /* 设置PWM回调函数 */
-    SetPwmEnable SetPwmEnCbk;   /* 设置PWM使能回调函数 */
-    SetPwmLevel SetPwmLevelCbk; /* 背光等级回调函数 */
-    NtcRes NtcResCbk;
-    Light_uint8_t BacklightEn;     /* 背光使能 */
-    Light_uint16_t BacklightPwm;   /* 背光PWM */
-    Light_uint16_t BacklightLevel; /* 背光等级 */
-} _Backlight_Op;
 
-_Backlight_Op Backlight_Operate;
 
 
 /* 设置PWM回调函数 */
@@ -494,7 +497,7 @@ void BackLight_Service(void)
                     BacklightFactorCtrl.curFactor = BacklightFactorCtrl.destFactor;
             }
 
-            BacklightFactorCtrl.u16DialdestDuty = BacklightFactorCtrl.curFactor * BacklightFactorCtrl.curFactor / 100;
+            BacklightFactorCtrl.u16DialdestDuty = Backlight_Operate.BacklightPwm * BacklightFactorCtrl.curFactor / 100;
 
             if (BacklightFactorCtrl.u16DialdestDuty < 50)
             {
@@ -518,17 +521,19 @@ void BackLight_Service(void)
             }
             Backlight_Operate.BacklightPwm = BacklightFactorCtrl.u16DialcurDuty;
 
-            Backlight_Operate.SetPwmCbk(Backlight_Operate.BacklightPwm);
+            // Backlight_Operate.SetPwmCbk(Backlight_Operate.BacklightPwm);
         }
         else
         {
             /* 无NTC策略 直接根据当前背光等级调整PWM */
-            Backlight_Operate.SetPwmCbk(Backlight_Operate.BacklightPwm);
+            Backlight_Operate.BacklightPwm = 100U;
+            // Backlight_Operate.SetPwmCbk(Backlight_Operate.BacklightPwm);
         }
     }
     else
     {
-        Backlight_Operate.SetPwmCbk(0);
+        Backlight_Operate.BacklightPwm = 100U;
+        // Backlight_Operate.SetPwmCbk(0);
     }
 }
 
@@ -538,7 +543,7 @@ void BackLight_Process(void)
     {
         if(Menu_Item_Select_Get(MENU_ITEM_BACKLIGHT_5) == 1)
         {
-            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, BACK_LIGHT_Val_5);
+            TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, (BACK_LIGHT_Val_5));
         }
         else if(Menu_Item_Select_Get(MENU_ITEM_BACKLIGHT_4) == 1)
         {

Firmware/Source/Application/BackLight.h

@@ -25,7 +25,7 @@ extern Light_uint16_t LightR_Status ;
 void Backlight_KL30_Wakeup_Init(void);
 void BackLight_Process(void);
 Light_uint8_t Backlight_SetPwmLevel(void);
-
+extern void BackLight_Service(void);
 
 
 

Firmware/Source/System/Sys_Task_List.c

@@ -53,6 +53,7 @@ void Sys_20ms_Tasks(void)
 void Sys_50ms_Tasks(void)
 {
     // BlueToothService();
+    BackLight_Service();
     Telltales_Management();
     g_u8Cursor_Posittion = Menu_Get_Current_Cursor_Information();