✨ feat:修改背光初始化,和背光函数调用

Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/RTE/Device/BAT32A279KM64FB/userdefine.h

@@ -20,7 +20,7 @@ User definitions
 
 typedef unsigned short 	MD_STATUS;
 
-#define HAS_BOOTLOADER (1u) // 仅仿真App时设置为0
+#define HAS_BOOTLOADER (0u) // 仅仿真App时设置为0
 #define APP_BASE (0x0000C400ul)
 
 /* Status list definition */

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -67,6 +67,7 @@ static void Power_KL30_Init(void)
     Menu_User_Init();
     Can_Init();
     Protocol_KL30_Wakeup_Init();
+    TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 100);
     RTE_DEEPSLEEP_GPIO_Interrupt_Enable(KL15_AD_IN, Trigger_Rising);
 }
 
@@ -107,7 +108,7 @@ static void Power_OVP_Init(void)
 static void Power_IG_OFF_Init(void)
 {
    Line_In_KL15_OFF_Init();
-   RTE_GPIO_Set_Level(Blacklight_PWM, 0);
+   TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 0);
 }
 
 static void Power_IG_ON_Init(void)
@@ -164,18 +165,10 @@ static Power_Status_em Power_Stay_OFF(void)
     }
     else
     {
-        if ((Common_GetIgnOffTime() < 1000))
+        if ((Common_GetIgnOffTime() < 20000))
         {
             u8PowerSts = EM_IGN_OFF;
         }
-        else
-        {
-            //igoff大于1s且下15电才进休眠,否则一直保持在igoff状态
-            //if(Sys_Read_KL15_Voltage() < 5000)
-            {
-               u8PowerSts = EM_IGN_Sleep_Init;
-            }
-        }
     }
 
     return u8PowerSts;
@@ -191,7 +184,7 @@ static Power_Status_em Power_Stay_Protect(void)
     /* 关闭所有外设，坪保留AD采集，电溝状思切�? */
     {
         TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 0);
-        CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Disable);
+        //CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Disable);
     }
     u8PowerSts = EM_IGN_OFF_Init;
     /* 电溝模弝正常 */
@@ -204,15 +197,10 @@ static Power_Status_em Power_Stay_Protect(void)
  
         if ( SYS_OPR_STAT_RUN )
         {
-            CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
+            //CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
             return u8PowerSts;
         }
  
-        //进入异常电压,电源库里直接将15电等于0,则直接退出,状态是igoff,下15则进入休眠
-        // if ( SYS_OPR_STAT_IGN_OFF )
-        // {
-        //    break;
-        // }
     }
 }
 

Firmware/Source/System/Sys_Task_List.c

@@ -80,6 +80,8 @@ void Sys_100ms_Tasks(void)
     //Data_Mileage_Clear();
 
     RTE_GPIO_Config(RTE_GPIO_PORT05_PIN04, GpioOut_High);
+    BackLight_Process();
+    //TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 100);
 
     // aaa = Menu_Item_Select_Get(MENU_ITEM_SELECT_AUTO);
 }