🐞 fix:54709 【豪进750TFT】【车速数值刷新】车速数值刷新时间改为200ms并去掉车速转速的阻尼

Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/HaoJin750TFT.uvprojx

@@ -275,7 +275,7 @@
               </OCR_RVCT3>
               <OCR_RVCT4>
                 <Type>1</Type>
-                <StartAddress>0xc400</StartAddress>
+                <StartAddress>0x0</StartAddress>
                 <Size>0x73c00</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
@@ -361,7 +361,7 @@
             </VariousControls>
           </Aads>
           <LDads>
-            <umfTarg>0</umfTarg>
+            <umfTarg>1</umfTarg>
             <Ropi>0</Ropi>
             <Rwpi>0</Rwpi>
             <noStLib>0</noStLib>

Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/Objects/HaoJin750TFT.sct

@@ -2,8 +2,8 @@
 ; *** Scatter-Loading Description File generated by uVision ***
 ; *************************************************************
 
-LR_IROM1 0x0000C400 0x00073C00  {    ; load region size_region
-  ER_IROM1 0x0000C400 0x00073C00  {  ; load address = execution address
+LR_IROM1 0x00000000 0x00073C00  {    ; load region size_region
+  ER_IROM1 0x00000000 0x00073C00  {  ; load address = execution address
    *.o (RESET, +First)
    *(InRoot$$Sections)
    .ANY (+RO)
@@ -12,8 +12,8 @@ LR_IROM1 0x0000C400 0x00073C00  {    ; load region size_region
   RW_IRAM1 0x20000000 0x0000FF00  {  ; RW data
    .ANY (+RW +ZI)
   }
-  RW_IRAM2 0x2000FF00 0x00000100  {  ; RW data
-   .ANY (RW_FUNC_PLL)
+  RW_IRAM2 0x2000FF00 0x00000100  {
+   .ANY (+RW +ZI)
   }
 }
 

Firmware/Source/Application/Data_ESpeed.h

@@ -11,7 +11,7 @@
 #define   DATA_ENGINE_RUNNING_THRESHOLD     400  //发动机运转阈值    
 #define   DATA_ENGINE_STOP_THRESHOLD        300  //发动机停止阈值
 
-#define   DATA_ESPEED_DAMPING_FACTOR        4    //阻尼系数
+#define   DATA_ESPEED_DAMPING_FACTOR        1    //阻尼系数
 #define   DATA_ESPEED_INC_STEP              10   //速度增加时慢加速速度变化步长
 #define   DATA_ESPEED_DEC_STEP              20   //方向改变时急减速速度变化步长
 #define   DATA_ESPEED_APPR_SPEED_MIN        10   //最小逼近速度

Firmware/Source/Application/Data_VSpeed.h

@@ -7,7 +7,7 @@
 #define   DATA_VEHICLE_RUNNING_THRESHOLD    25  //汽车行进阈值    
 #define   DATA_VEHICLE_STOP_THRESHOLD       20  //汽车停止阈值
 
-#define   DATA_VSPEED_DAMPING_FACTOR        3   //阻尼系数
+#define   DATA_VSPEED_DAMPING_FACTOR        1   //阻尼系数
 #define   DATA_VSPEED_INC_STEP              2   //速度增加时慢加速速度变化步长
 #define   DATA_VSPEED_DEC_STEP              6   //方向改变时急减速速度变化步长
 #define   DATA_VSPEED_APPR_SPEED_MIN        2   //最小逼近速度

Firmware/Source/Component/AMT630H/AMT630H_Datas.c

@@ -3215,6 +3215,8 @@ static void AMT630H_GUI_ESpeed(uint16_t ESpeed)
  * @brief 主界面显示
  *
  */
+uint8_t VechileSpeed_time = 0;
+uint8_t VechileSpeed = 0;
 void AMT630H_GUI_BACKGRAND()
 {
     /*背景图*/
@@ -3259,9 +3261,19 @@ void AMT630H_GUI_BACKGRAND()
     }
     AMT630H_GUI_Voltage((ADC_Read_Signal(ADC_CH_KL30_VOLTAGE)) / 10);
     AMT630H_GUI_ODO(Get_ODO_Value() / 10, 0);
+    if(VechileSpeed_time < 4)
+    {
+        VechileSpeed_time++;
+    }
+    else
+    {
+        VechileSpeed_time = 0;
+        VechileSpeed = Get_DispVechileSpeed() / 10;
+        
+    }
     if (Get_VechileSpeedValid() == 1)
     {
-        AMT630H_GUI_VSpeed(Get_DispVechileSpeed() / 10);
+        AMT630H_GUI_VSpeed(VechileSpeed);
     }
     else
     {