Skip to content

H
haoJin750TFT
Commit ee3a95ec authored by 张金硕's avatar 张金硕
Browse files
Options

Merge branch 'jinshuo' into 'dev' 

Jinshuo

See merge request !103
parents c4794fb2 944e9564
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 870 additions and 1225 deletions
Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/HaoJin750TFT.uvprojx
View file @ ee3a95ec
......@@ -748,6 +748,16 @@
<FileType>4</FileType>
<FilePath>..\..\..\..\Source\Application\Hysteresis_V10_239.lib</FilePath>
</File>
<File>
<FileName>Data_OilPressure.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\Source\Application\Data_OilPressure.c</FilePath>
</File>
<File>
<FileName>Data_OilPressure.h</FileName>
<FileType>5</FileType>
<FilePath>..\..\..\..\Source\Application\Data_OilPressure.h</FilePath>
</File>
</Files>
</Group>
<Group>
......
Firmware/Project/Cmsemicon/BAT32A279/MDK_ARM/RTE/Device/BAT32A279KM64FB/system_BAT32A279.c
View file @ ee3a95ec
......@@ -64,11 +64,8 @@ typedef enum {
following is an example for different system frequencies */
//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
#if (HAS_BOOTLOADER == 1U)
#if (HAS_BOOTLOADER != 1U)
const uint8_t user_opt_data[4] __attribute__((used)) __attribute__((section(".ARM.__AT_0x0000C4C0"))) =
#else
const uint8_t user_opt_data[4] __attribute__((used)) __attribute__((section(".ARM.__AT_0x000000C0"))) =
#endif
{
/**
......@@ -132,7 +129,7 @@ const uint8_t user_opt_data[4] __attribute__((used)) __attribute__((section(".AR
// <0x72=> VLVDH = 4.06V/3.98V, VLVDL = 2.75V ( interrupt & reset mode )
// <i> Please setting the item for interrupt & reset mode
// </h>
0x72,
0x73,
/**
* @brief HOCO Control BYTE (FRQSEL)
......@@ -170,7 +167,7 @@ const uint8_t user_opt_data[4] __attribute__((used)) __attribute__((section(".AR
0xFF
};
#endif
//-------- <<< end of configuration section >>> ------------------
/** @} */ /* End of group Configuration_of_User_Option_Byte */
......
Firmware/Source/Application/BackLight.c
View file @ ee3a95ec
......@@ -7,7 +7,8 @@
Light_uint8_t LightADCompleteFlg = 0u;
Light_uint16_t LightR = 0u;
Light_uint16_t LightR_Status = 0;
Light_uint16_t LightR_Status_Count = 0u;
Light_uint16_t LightR_Status_NCount = 0u;
Light_uint16_t LightR_Status_DCount = 0u;
Light_uint16_t NtcDataCount;
Light_uint16_t NtcData[LIGHT_DATA_NUM] = {0};
typedef struct
......@@ -206,23 +207,41 @@ void BackLight_Get_curDuty(void)
NTCresistance = ADC_Read_Signal(ADC_CH_NTC_TEMP);
/* 计算温度值 */
NTCDegrees = NTC_Get_Degrees(NTCResBoard ,NTCDegreesBoard, sizeof(NTCResBoard)/sizeof(uint16_t), NTCresistance);
if ( NTCDegrees < 650 )
if ( NTCDegrees < 600 )
{
g_stBL.destFactor = 100;
}
else if ( NTCDegrees <= 850 )
{
wtemp = (850 - NTCDegrees);
wtemp *= 3;
wtemp += 400;
wtemp *= 1;
wtemp += 700;
wtemp /= 10;
g_stBL.destFactor = wtemp;
/* 85°为40%占空比，65°为100%占空比, 1°大概为3% */
/* 85°为70%占空比，60°为95%占空比, 1°大概为1% */
}
else
else if(NTCDegrees <= 880 )
{
g_stBL.destFactor = 40;
wtemp = (880 - NTCDegrees);
wtemp *= 16;
wtemp += 200;
wtemp /= 10;
g_stBL.destFactor = wtemp;
/* 88°为20%占空比，85°为70%占空比, 1°大概为16.6% */
}
else if(NTCDegrees <= 900 )
{
wtemp = (900 - NTCDegrees);
wtemp *= 5;
wtemp += 100;
wtemp /= 10;
g_stBL.destFactor = wtemp;
/* 90°为10%占空比，88°为20%占空比, 1°大概为5% */
}
else
{
g_stBL.destFactor = 10;
}
if ( (g_stBL.curFactor < g_stBL.destFactor) && (NTCDegrees < 750) )
{
......@@ -309,17 +328,17 @@ void BackLight_Get_curDuty(void)
g_stBL.u16TftdestDuty = 100;
}
/* 如果当前占空比小于100，那还是按照上次结果显示 */
if(g_stBL.u16TftcurDuty < 100)
{
// /* 如果当前占空比小于100，那还是按照上次结果显示 */
// if(g_stBL.u16TftcurDuty < 100)
// {
// g_stBL.u16TftcurDuty = g_stBL.u16TftdestDuty;
// }
// /* 逐步逼近目标占空比 */
// else
// {
// U16_Data_Gradient((uint16_t *)&g_stBL.u16TftcurDuty, g_stBL.u16TftdestDuty, 1u, (uint16_t *)&g_stBL.u16DialDampingTimer, 1u);
// }
g_stBL.u16TftcurDuty = g_stBL.u16TftdestDuty;
}
/* 逐步逼近目标占空比 */
else
{
U16_Data_Gradient((uint16_t *)&g_stBL.u16TftcurDuty, g_stBL.u16TftdestDuty, 1u, (uint16_t *)&g_stBL.u16DialDampingTimer, 1u);
}
}
#if 0
......@@ -477,43 +496,47 @@ void BackLight_Process(void)
if(LightR <= 200)
{
LightR_Status_Count++;
if(LightR_Status_Count>=150)
LightR_Status_NCount++;
if(LightR_Status_NCount>=150)
{
LightR_Status_Count = 0;
LightR_Status_NCount = 150;
LightR_Status_DCount = 0;
LightR_Status = 0;
g_u8Display_Mode = ModeNIGHT;
}
}
else if(LightR > 200)
{
LightR_Status_Count++;
if(LightR_Status_Count>=150)
LightR_Status_DCount++;
if(LightR_Status_DCount>=150)
{
LightR_Status_Count = 0;
LightR_Status_DCount = 150;
LightR_Status_NCount = 0;
LightR_Status = 1;
g_u8Display_Mode = ModeDAY;
}
}
/* 系统的意思是要当前背光等级基础上的80%和20%，不是直接设置背光 */
/*if(LightR_Status == 0)
{
BackLight_Set_Lvl(Light_Lvl_1);
BackLight_Set_Lvl(Light_Lvl_1);
}
else
{
BackLight_Set_Lvl(Light_Lvl_4);
BackLight_Set_Lvl(Light_Lvl_4);
}*/
if(LightR_Status == 0)
{
g_u8Display_Mode = ModeNIGHT;
}
else if(LightR_Status == 1)
{
g_u8Display_Mode = ModeDAY;
}
// if(LightR_Status == 0)
// {
// g_u8Display_Mode = ModeNIGHT;
// }
// else if(LightR_Status == 1)
// {
// g_u8Display_Mode = ModeDAY;
// }
}
}
/* 根据感光判断当前应该设置什么背光等级 */
else if(Menu_Item_Select_Get(MENU_ITEM_BACKLIGHT_AUTO))
if(Menu_Item_Select_Get(MENU_ITEM_BACKLIGHT_AUTO))
{
if(Backlight_GetPwmLevel() == 1U)
{
......@@ -566,26 +589,26 @@ void BackLight_Process(void)
}
/* 数据处理，包括NTC功能 */
BackLight_Get_curDuty();
if(Menu_Item_Select_Get(MENU_ITEM_SELECT_AUTO))
{
uint16_t u16TftPwmBackShow = g_stBL.u16TftcurDuty ;
if(LightR_Status == 0)
{
u16TftPwmBackShow *= 20U;
u16TftPwmBackShow /= 100U;
}
else
{
u16TftPwmBackShow *= 80U;
u16TftPwmBackShow /= 100U;
}
TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, u16TftPwmBackShow);
}
else
{
TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, g_stBL.u16TftcurDuty);
}
TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, g_stBL.u16TftcurDuty);
// if(Menu_Item_Select_Get(MENU_ITEM_SELECT_AUTO))
// {
// uint16_t u16TftPwmBackShow = g_stBL.u16TftcurDuty ;
// if(LightR_Status == 0)
// {
// u16TftPwmBackShow *= 20U;
// u16TftPwmBackShow /= 100U;
// }
// else
// {
// u16TftPwmBackShow *= 80U;
// u16TftPwmBackShow /= 100U;
// }
// TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, u16TftPwmBackShow);
// }
// else
// {
// TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, g_stBL.u16TftcurDuty);
// }
}
else
{
......
Firmware/Source/Application/BlueTooth.c
View file @ ee3a95ec
......@@ -8,6 +8,8 @@ uint8_t GetPhoneBookVaild = 0;
uint8_t TextInit = 0;
uint8_t SetUUIDTimes = 0;
uint16_t LastPhoneBookTotalCount = 0;
uint8_t LastCurIgnSt = POWER_STATE_IGN_OFF;
uint8_t IOState = 0;
_PICID_Struct PicObj;
_QRCODE_RECT QRCode_Rect;
const uint8_t HJBlueToothName[9]= {"HJ750"};
......@@ -47,6 +49,14 @@ uint8_t MCUVersionASCLLList[26] =
void TextService(void);
void BlueTooth_IGOFF_INIT(void)
{
GetBlueToothVaild =0;
OTA_Update_Flag = 0;
SetBluetoothCloseCount = 0;
SetBluetoothTurnXX(0);
SetUpdateCtrl(0,QRCode_Rect);
}
void BlueToothService(void)
{
if(SYS_OPR_STAT_IGN_ON)
......@@ -61,18 +71,30 @@ void BlueToothService(void)
}
else
{
SetBluetoothCloseCount++;
if(GetBlueToothVaild == 1)
{
if(SetBluetoothCloseCount < 30)
{
SetBluetoothTurnXX(0);
}
else
{
GetBlueToothVaild = 0;
SetBluetoothCloseCount = 0;
}
SetBluetoothCloseCount++;
// if(SetBluetoothCloseCount < 30)
// {
// SetBluetoothTurnXX(0);
// }
// else
// {
// GetBlueToothVaild = 0;
// SetBluetoothCloseCount = 0;
// }
// SetBluetoothCloseCount++;
SetBluetoothTurnXX(0);
GetBlueToothVaild = 0;
}
if(SetBluetoothCloseCount >= 5)
{
SetBluetoothTurnXX(0);
SetBluetoothCloseCount = 0;
}
else
{
;
}
}
......@@ -146,10 +168,22 @@ void BlueToothService(void)
}
else
{
GetBlueToothVaild =0;
OTA_Update_Flag = 0;
SetBluetoothTurnXX(0);
SetUpdateCtrl(0,QRCode_Rect);
;
}
if (LastCurIgnSt != System_FUN_KL15_Status_Get())
{
if (SYS_OPR_STAT_IGN_ON)
{
IOState = IOState & 0x02;
PackedTransfer_EasyNavigation(IOState);
}
else
{
SetPagePic(GRAPHICS_PAGE_0, Pic_0001_0_0);
IOState = IOState | 0x01;
PackedTransfer_EasyNavigation(IOState);
}
LastCurIgnSt = System_FUN_KL15_Status_Get();
}
}
......
Firmware/Source/Application/BlueTooth.h
View file @ ee3a95ec
......@@ -25,6 +25,8 @@ typedef struct {
#define INFORMATION_VERSION_DATE "20241015"
#define SW_EXTERNAL_VERSION "100"
#define POWER_STATE_IGN_OFF 0u
#define POWER_STATE_IGN_ON 1u
static const uint8_t DATA_Version[8] = {INFORMATION_VERSION_DATE};
static const uint8_t SW_Version[3] = {SW_EXTERNAL_VERSION};
......@@ -41,6 +43,7 @@ static const uint8_t SW_Version[3] = {SW_EXTERNAL_VERSION};
extern void BlueToothService(void);
extern uint8_t Get_Talking_PhoneBookValid(void);
extern uint8_t Get_UUID_UDSStatus(void);
extern void BlueTooth_IGOFF_INIT(void);
extern _PICID_Struct PicObj;
extern _QRCODE_RECT QRCode_Rect;
extern uint8_t PhoneNumber[40];
......@@ -53,5 +56,6 @@ extern uint8_t TextFaultCodeNum[10];
extern uint8_t UUIDDisplay[42];
extern TEXT_STRUCT TextPara[];
extern uint8_t UUIDConfigBuf[21];
extern uint8_t IOState;
#endif
\ No newline at end of file
Firmware/Source/Application/Data_Coolant.c
View file @ ee3a95ec
......@@ -3,7 +3,7 @@
#include "Hysteresis.h"
#define FAST_TIME 15 //20*20 400ms变化一格
#define NORMAL_TIME 500 //500*20 10s变化一格
#define Disconnected_TIME 25 //掉线时间
#define Disconnected_TIME 1 //掉线时间
#pragma ghs section bss = ".myNonInitArea"
//_Data_Cng Data_Cng_Percent;
//_Data_Cng Data_Cng_Pressure;
......@@ -19,6 +19,8 @@ DataCoolantTempSamplerStruct DataResCoolantTempSampler ;
uint8_t u8SelfCheckTime_Finish;
#define SelfCheckTime 60
uint16_t TEMP_SPEED;
uint8_t Lost_Flag;
uint16_t Lost_Time;
uint16_t time_temp;
uint16_t time_power_on = 0;
uint16_t time_lost = 0;
......@@ -114,6 +116,7 @@ void TEMP_KL30_Init ( void )
DataCoolantTemp_Dis.u8_CurSeg = 0;
DataCoolantTemp.TEMPSetp = 0;
DataCoolantTemp.u8_ResStatus = 0;
DataCoolantTemp.u8_Last_ResStatus = 0;
TEMP_SPEED = 0;
time_power_on = 0;
time_lost = 0;
......@@ -133,6 +136,7 @@ void TEMP_KL15_Init ( void )
DataCoolantTemp.u16Res_ADValue = 0;
DataCoolantTemp.u8Res_ADValid = 0;
DataCoolantTemp.u8_ResStatus = 0;
DataCoolantTemp.u8_Last_ResStatus = 0;
DataCoolantTemp_Dis.u8_CurSeg = 0;
DataResCoolantTempSampler.Cnt = 0;
DataCoolantTemp.TEMPMode = 0;
......@@ -147,7 +151,7 @@ void Data_Coolant_Temp_Processing_Service ( void )
uint16_t Coolant_Temperature;
uint32_t Temp;
uint8_t i;
Coolant_Temperature = Get_CAN_CH0_ID_101_Sig_ECU_Engine_Temperature();
//can
if (SYS_OPR_STAT_IGN_ON )
......@@ -175,7 +179,7 @@ void Data_Coolant_Temp_Processing_Service ( void )
else if(Coolant_Temperature <= 2430)
{
Coolant_Temperature =0;
DataCoolantTemp.u8Can_Valid = 0;
DataCoolantTemp.u8Can_Valid = 1;
}
else
{
......@@ -249,7 +253,7 @@ void Data_Coolant_Temp_Processing_Service ( void )
}
else
{
DataCoolantTemp.u8_ResStatus = 3;//当前状态为开路
DataCoolantTemp.u8_Last_ResStatus = 3;//当前状态为开路
DataCoolantTemp.u8Res_Valid = 0 ;
DataCoolantTemp.u16Res_Actual = 0 ;
DataResCoolantTempSampler.ResOpen_InActTimer = 0;
......@@ -274,7 +278,7 @@ void Data_Coolant_Temp_Processing_Service ( void )
}
if(DataCoolantTemp.u8Can_Valid || DataCoolantTemp.u8Res_Valid )
{
DataCoolantTemp.u8_ResStatus = 1;//当前状态正常
DataCoolantTemp.u8_Last_ResStatus = 1;//当前状态正常
}
if (DataCoolantTemp.u8Can_Valid == 1)
{
......@@ -285,20 +289,21 @@ void Data_Coolant_Temp_Processing_Service ( void )
DataCoolantTemp.Temp_Value = DataCoolantTemp.u16Res_Actual;
if(DataCoolantTemp.u16Res_ADValue < 40)
{
DataCoolantTemp.u8_ResStatus = 2;//当前状态为短路
DataCoolantTemp.u8_Last_ResStatus = 2;//当前状态为短路
DataCoolantTemp.TEMPMode = 2;
}
}
else
{
if(DataCoolantTemp.u8_ResStatus != 3)
if(DataCoolantTemp.u8_Last_ResStatus != 3)
{
DataCoolantTemp.u8_ResStatus = 0;
DataCoolantTemp.u8_Last_ResStatus = 0;
}
DataCoolantTemp.Temp_Value = 0;
}
TEMP_Gauges_Cal();
time_power_on++;
TEMP_SPEED = NORMAL_TIME;
if(time_power_on >= 100)//上电延时获取数据
{
time_power_on = 100;
......@@ -306,18 +311,28 @@ void Data_Coolant_Temp_Processing_Service ( void )
if(DataCoolantTemp.u8Can_Valid||DataCoolantTemp.u8Res_Valid)
{
time_lost = 0;
if(DataCoolantTemp.TEMPMode == 3)//掉线
if(DataCoolantTemp.TEMPMode ==3)//掉线
{
TEMP_SPEED = FAST_TIME;
if(DataCoolantTemp.u8_ResStatus != 3)
{
Lost_Flag = 1;
time_temp = 0;
}
}
else if(DataCoolantTemp.TEMPMode == 0)//自检
else if (DataCoolantTemp.TEMPMode == 2)
{
DataCoolantTemp_Dis.u8_CurSeg = DataCoolantTemp.TEMPSetp;
if(DataCoolantTemp.u8_ResStatus != 2)
{
Lost_Flag = 1;
time_temp = 0;
}
}
if(DataCoolantTemp.TEMPMode == 3)
else if(DataCoolantTemp.TEMPMode == 0)//自检
{
DataCoolantTemp.TEMP_Fastime = 100;
DataCoolantTemp_Dis.u8_CurSeg = DataCoolantTemp.TEMPSetp;
}
DataCoolantTemp.TEMPMode = 1;
}
else
......@@ -329,28 +344,42 @@ void Data_Coolant_Temp_Processing_Service ( void )
if(DataCoolantTemp.TEMPMode != 3)
{
DataCoolantTemp.TEMPMode = 3;
TEMP_SPEED = NORMAL_TIME;
time_temp = 0;
Lost_Flag = 1;
}
DataCoolantTemp.TEMPSetp = 0;
}
}
}
time_temp ++;
if(DataCoolantTemp.TEMP_Fastime>0)
// if(DataCoolantTemp.u8_ResStatus==0)
// {
// DataCoolantTemp.u8_ResStatus = DataCoolantTemp.u8_Last_ResStatus;
// }
if(DataCoolantTemp.u8_ResStatus != DataCoolantTemp.u8_Last_ResStatus)
{
DataCoolantTemp.TEMP_Fastime--;
}
if(DataCoolantTemp.TEMP_Fastime==0)
{
if(DataCoolantTemp.TEMPSetp == DataCoolantTemp_Dis.u8_CurSeg)
Lost_Time++;
if(Lost_Time > 150)
{
TEMP_SPEED = NORMAL_TIME;
time_temp = 0;
}
DataCoolantTemp.u8_ResStatus = DataCoolantTemp.u8_Last_ResStatus;
Lost_Time = 0;
Lost_Flag = 0;
DataCoolantTemp_Dis.u8_CurSeg = DataCoolantTemp.TEMPSetp;
}
}
// if(Lost_Flag)
// {
// Lost_Time++;
// if(Lost_Time > 150)
// {
// DataCoolantTemp.u8_ResStatus = DataCoolantTemp.u8_Last_ResStatus;
// Lost_Time = 0;
// Lost_Flag = 0;
// DataCoolantTemp_Dis.u8_CurSeg = DataCoolantTemp.TEMPSetp;
// }
// }
}
time_temp ++;
if(time_temp>=TEMP_SPEED)
{
......
Firmware/Source/Application/Data_Coolant.h
View file @ ee3a95ec
......@@ -31,7 +31,8 @@ typedef struct
uint8_t TEMPSetp;
uint8_t TEMPMode;
uint16_t TEMP_Fastime ;
uint8_t u8_ResStatus //
uint8_t u8_ResStatus;
uint8_t u8_Last_ResStatus;
}DataCoolantTempStruct; //水温数据结构
......
Firmware/Source/Application/Data_OilPressure.c 0 → 100644
View file @ ee3a95ec
#include "Data_OilPressure.h"
#include "Components.h"
#define OIL_DATA_TIME 25u /*这里填写多长时间采集一个数据，单位ms*/
#define OIL_DATA_NUM 20u /*机油压力电阻采集数据总数 最大255*/
#define OIL_CAL_START 5u /*数据排序后取中间部分计算平均：起始*/
#define OIL_CAL_END 15u /*数据排序后取中间部分计算平均：结束*/
uint16_t g_u16OilData[OIL_DATA_NUM];
uint8_t g_u8OilDataCount = 0u;
// uint8_t g_u8OILStateInitFlag = 0u;
uint16_t OilPressureR = 0u; /*滤波后的机油压力电阻，精度0.1*/
uint8_t g_u8OilADCompleteFlg = 0u;
void Oil_Pressure_KL30_Init(void)
{
// g_u8OILStateInitFlag = 1u;
g_u8OilADCompleteFlg = 0u;
}
void Oil_Pressure_KL15_Init(void)
{
// g_u8OILStateInitFlag = 1u;
g_u8OilADCompleteFlg = 0u;
}
void Oil_R_Cal(uint8_t deltaTime)
{
uint16_t OilPressureRes = 0;
uint8_t i, j;
uint32_t temp32;
static uint16_t timeCount = 0;
// if(g_u8OILStateInitFlag)
// {
// OilPressureR = ADC_Read_Signal(ADC_CH_OIL_PRESSURE_R);
// }
if (timeCount >= OIL_DATA_TIME)
{
timeCount = 0;
if (g_u8OilDataCount < OIL_DATA_NUM)
{
/*获取机油压力电阻*/
OilPressureRes = ADC_Read_Signal(ADC_CH_OIL_PRESSURE_R);
/*四舍五入*/
if (OilPressureRes < 60000) //针对此项目机油压力采集电路补偿后的阻值
{
if (OilPressureRes % 10 >= 5)
{
OilPressureRes += 5;
}
}
else
{
OilPressureRes = 0xFFFF;
}
/*由小到大插入数据*/
for (i = 0; i < g_u8OilDataCount; i++)
{
if (OilPressureRes < g_u16OilData[i])
{
break;
}
}
for (j = g_u8OilDataCount; j > i; j--)
{
g_u16OilData[j] = g_u16OilData[j - 1];
}
g_u16OilData[i] = OilPressureRes;
g_u8OilDataCount++;
}
else
{
/*一组数据采集完毕，取中间部分计算平均值*/
temp32 = 0;
for (i = OIL_CAL_START; i < OIL_CAL_END; i++)
{
temp32 += g_u16OilData[i];
}
OilPressureR = temp32 / (OIL_CAL_END - OIL_CAL_START);
g_u8OilDataCount = 0;
g_u8OilADCompleteFlg = 1;
}
}
timeCount += deltaTime;
}
uint8_t Get_OilPressureStauts(void)
{
if(OilPressureR < 59500)
{
return 1U;
}
else
{
return 0u;
}
}
\ No newline at end of file
Firmware/Source/Application/Data_OilPressure.h 0 → 100644
View file @ ee3a95ec
#ifndef DATA_OILPRESSURE_H
#define DATA_OILPRESSURE_H
#include "stdint.h"
void Oil_Pressure_KL30_Init(void);
void Oil_Pressure_KL15_Init(void);
void Oil_R_Cal(uint8_t deltaTime);
uint8_t Get_OilPressureStauts(void);
#endif
\ No newline at end of file
Firmware/Source/Application/FaultCode.c
View file @ ee3a95ec
This diff is collapsed.
Firmware/Source/Application/FaultCode.h
View file @ ee3a95ec
......@@ -6,55 +6,40 @@
#include <string.h>
/*故障码类型A can报文轮询发送方式*/
#define FaultCodeType_A 1
#define FaultCodeType FaultCodeType_A
#define MaxFaultCode 40
#define MaxFaultCode 72
#define FaultCodeCount 5000
typedef enum
{
DTC1,
DTC2,
DTC3,
NUM_FAULT_TYPES,
} FaultCodeType_Num;
typedef uint32_t (*FaultCodeCallback)(void); /* 故障码回调函数 */
typedef uint16_t (*FaultCodeNumback)(void); /* 故障码个数回调函数 */
typedef uint16_t (*FaultCodeValidback)(void); /* 故障码有效回调函数 */
typedef struct
{
uint32_t u16FaultCode; /* 故障码 */
uint16_t u16FaultCodeCount; /* 故障码总数 */
} _st_FaultCode;
#define DISP_TIMER 500
typedef struct
typedef uint32_t(*Get_FaultCode)(void);
typedef uint8_t(*Get_FaultCodeNum)(void);
typedef struct __attribute__((aligned(4)))
{
FaultCodeCallback callbacks[NUM_FAULT_TYPES];
FaultCodeNumback FaultCodeNumCbk;
FaultCodeValidback FaultCodeVaildCbk;
} _st_Init;
uint32_t *code_list; //故障码列表
uint8_t hade; //列表头
uint8_t tail; //列表尾
uint8_t code_num; //获取的故障码数量
uint8_t len; //故障码列表最大长度
uint8_t disp; //故障码显示下标
uint16_t TimeCount; //故障码循环显示用的定时器
uint16_t disp_timer; //故障码显示的超时时间，超时显示下一个
Get_FaultCode Get_FaultCode1_cbk; //获取故障码的回调函数1
Get_FaultCode Get_FaultCode2_cbk; //获取故障码的回调函数2
Get_FaultCodeNum Get_FaultCodeNum_cbk; //获取故障码数量的回调函数
}FaultCodeList_t;
uint8_t List_Init(FaultCodeList_t *CodeList, uint32_t Arr[], uint8_t Len);
extern void FaultCode_Service(uint16_t Cycle);
extern void FaultCode_Init(void);
void FaultCode_Init(void);
void FaultCode_Servers(void);
extern uint32_t Get_Current_FaultCode(void);
extern uint8_t Get_Current_Hight_FaultCode(void);
extern uint8_t Get_Current_Hight_FaultCode(void);
extern uint8_t Get_FaultCode_Valid(void);
extern uint8_t Get_Current_Mid_FaultCode(void);
// extern uint8_t Get_FaultCode_Valid(void);
#endif
\ No newline at end of file
Firmware/Source/Component/AMT630H/AMT630H.c
View file @ ee3a95ec
......@@ -48,76 +48,6 @@ static uint16_t AMT630H_Animation_DispPic = 0;
static uint16_t AMT630H_Animation_RefreshTime = 0;
static uint32_t AMT630H_Animation_RefreshTime_default = 0;
static const uint16_t BootAnimationList[AMT630H_ANIMATION_PIC_NUM] = {
Pic_1055_0_0,
Pic_1056_0_0,
Pic_1057_0_0,
Pic_1058_0_0,
Pic_1059_0_0,
Pic_1060_0_0,
Pic_1061_0_0,
Pic_1062_0_0,
Pic_1063_0_0,
Pic_1064_0_0,
Pic_1065_0_0,
Pic_1066_0_0,
Pic_1067_0_0,
Pic_1068_0_0,
Pic_1069_0_0,
Pic_1070_0_0,
Pic_1071_0_0,
Pic_1072_0_0,
Pic_1073_0_0,
Pic_1074_0_0,
Pic_1075_0_0,
Pic_1076_0_0,
Pic_1077_0_0,
Pic_1078_0_0,
Pic_1079_0_0,
Pic_1080_0_0,
Pic_1081_0_0,
Pic_1082_0_0,
Pic_1083_0_0,
Pic_1084_0_0,
Pic_1085_0_0,
Pic_1086_0_0,
Pic_1087_0_0,
Pic_1088_0_0,
Pic_1089_0_0,
Pic_1090_0_0,
Pic_1091_0_0,
Pic_1092_0_0,
Pic_1093_0_0,
Pic_1094_0_0,
Pic_1095_0_0,
Pic_1096_0_0,
Pic_1097_0_0,
Pic_1098_0_0,
Pic_1099_0_0,
Pic_1100_0_0,
Pic_1101_0_0,
Pic_1102_0_0,
Pic_1103_0_0,
Pic_1104_0_0,
Pic_1105_0_0,
Pic_1106_0_0,
Pic_1107_0_0,
Pic_1108_0_0,
Pic_1109_0_0,
Pic_1110_0_0,
Pic_1111_0_0,
Pic_1112_0_0,
Pic_1113_0_0,
Pic_1114_0_0,
Pic_1115_0_0,
Pic_1116_0_0,
Pic_1117_0_0,
Pic_1118_0_0,
Pic_1119_0_0,
Pic_1120_0_0,
Pic_1121_0_0,
Pic_1122_0_0,
Pic_1123_0_0,
Pic_1124_0_0,
Pic_1125_0_0,
Pic_1125_0_0,
Pic_1125_0_0,
......@@ -125,7 +55,76 @@ static const uint16_t BootAnimationList[AMT630H_ANIMATION_PIC_NUM] = {
Pic_1125_0_0,
Pic_1125_0_0,
Pic_1125_0_0,
Pic_1124_0_0,
Pic_1123_0_0,
Pic_1122_0_0,
Pic_1121_0_0,
Pic_1120_0_0,
Pic_1119_0_0,
Pic_1118_0_0,
Pic_1117_0_0,
Pic_1116_0_0,
Pic_1115_0_0,
Pic_1114_0_0,
Pic_1113_0_0,
Pic_1112_0_0,
Pic_1111_0_0,
Pic_1110_0_0,
Pic_1109_0_0,
Pic_1108_0_0,
Pic_1107_0_0,
Pic_1106_0_0,
Pic_1105_0_0,
Pic_1104_0_0,
Pic_1103_0_0,
Pic_1102_0_0,
Pic_1101_0_0,
Pic_1100_0_0,
Pic_1099_0_0,
Pic_1098_0_0,
Pic_1097_0_0,
Pic_1096_0_0,
Pic_1095_0_0,
Pic_1094_0_0,
Pic_1093_0_0,
Pic_1092_0_0,
Pic_1091_0_0,
Pic_1090_0_0,
Pic_1089_0_0,
Pic_1088_0_0,
Pic_1087_0_0,
Pic_1086_0_0,
Pic_1085_0_0,
Pic_1084_0_0,
Pic_1083_0_0,
Pic_1082_0_0,
Pic_1081_0_0,
Pic_1080_0_0,
Pic_1079_0_0,
Pic_1078_0_0,
Pic_1077_0_0,
Pic_1076_0_0,
Pic_1075_0_0,
Pic_1074_0_0,
Pic_1073_0_0,
Pic_1072_0_0,
Pic_1071_0_0,
Pic_1070_0_0,
Pic_1069_0_0,
Pic_1068_0_0,
Pic_1067_0_0,
Pic_1066_0_0,
Pic_1065_0_0,
Pic_1064_0_0,
Pic_1063_0_0,
Pic_1062_0_0,
Pic_1061_0_0,
Pic_1060_0_0,
Pic_1059_0_0,
Pic_1058_0_0,
Pic_1057_0_0,
Pic_1056_0_0,
Pic_1055_0_0,
};
void AMT630H_Animation_PlayProc(uint16_t PicIndex)
{
......@@ -133,6 +132,16 @@ void AMT630H_Animation_PlayProc(uint16_t PicIndex)
uint32_t tmpLen = 0;
SetPageGuid(GRAPHICS_PAGE_0, 1, 0, 0);
SetPageBackground(GRAPHICS_PAGE_0, PicIndex);
// if (AMT630H_Animation_DispPic == (AMT630H_ANIMATION_PIC_NUM - 30))
// {
// IOState = IOState | 0x02;
// PackedTransfer_EasyNavigation(IOState);
// }
// else
// {
// IOState = IOState & 0x01;
// PackedTransfer_EasyNavigation(IOState);
// }
PackedTransfer_Page();
// PackedTransfer_GetSwVer();
......@@ -413,7 +422,7 @@ void AMT630H_Main(void)
{
AMT630H_Animation_RefreshTime = 0;
AMT630H_Animation_PlayProc(BootAnimationList[AMT630H_Animation_DispPic]);
AMT630H_Animation_DispPic--;
AMT630H_Animation_DispPic++;
if(AMT630H_Animation_DispPic >= AMT630H_ANIMATION_PIC_NUM)
{
AMT630H_Animation_Finish = 1;
......@@ -425,12 +434,25 @@ void AMT630H_Main(void)
}
else
{
AMT630H_Animation_RefreshTime = 0;
PicObj.qr_logo_id = 0;//Pic_0234 小数字9 EA
PicObj.main_pic_id = Pic_0001; //转速红12
PicObj.update_pic_id = Pic_0233;//小数字8 E9
PicObj.second_menu = 0;
PicObj.navigation_task_id = Pic_0411;//红色小e 19B
if(g_u8Display_Mode == ModeDAY)
{
PicObj.qr_pic_id = Pic_0494;//请使用猎变APP扫码连接
}
else
{
PicObj.qr_pic_id = Pic_1031;//请使用猎变APP扫码连接
}
if(AMT630H_RefreshTime >= AMT630H_REFRESH_TIME)
{
AMT630H_RefreshTime = 0;
//AMT630H_GUI_DisplayProc();
SetPageGuid(GRAPHICS_PAGE_0, 1, 0, 0);
PackedTransfer_DisplayPhoneMirrorQRcode(0, PicObj);
SetPagePic(GRAPHICS_PAGE_0, Pic_0001_0_0);
PackedTransfer_Page();
}
......@@ -452,7 +474,7 @@ unsigned char AMT630H_isInitFinish(void)
void AMT630H_Animation_IGON(void)
{
AMT630H_Animation_Finish = 0;
AMT630H_Animation_DispPic = 76;
AMT630H_Animation_DispPic = 0;
}
unsigned char AMT630H_Animation_Finish_Flage(void)
{
......
Firmware/Source/Component/AMT630H/AMT630H_Datas.c
View file @ ee3a95ec
......@@ -33,7 +33,7 @@ void AMT630H_GUI_SETTING(void);
void AMT630H_GUI_Quit(void);
void AMT630H_GUI_Phone_Connect(void);
void AMT630H_GUI_Fault_Information(void);
void AMT630H_GUI_FaultCode(uint8_t FaultCodeLost,uint8_t FaultCodevalid,uint8_t FaultCode_hight,uint8_t FaultCode_mid);
void AMT630H_GUI_FaultCode(uint8_t FaultCodeLost);
void AMT630H_GUI_Language_Information(void);
void AMT630H_GUI_Unit_Information(void);
void AMT630H_GUI_Display_Mode_Information(void);
......@@ -142,7 +142,7 @@ void AMT630H_GUI_Fault_Information(void)
SetPagePic(GRAPHICS_PAGE_0, Pic_0168_350_290);
SetPagePic(GRAPHICS_PAGE_0, Pic_0169_353_227);/*历史故障*/
SetPagePic(GRAPHICS_PAGE_0, Pic_0170_354_162);/*当前故障*/
AMT630H_GUI_FaultCode(Get_FaultCode_Lost(),Get_FaultCode_Valid(),Get_Current_Hight_FaultCode(),Get_Current_Mid_FaultCode());
AMT630H_GUI_FaultCode(Get_FaultCode_Lost());
}
else if(g_u8Language == EN)
{
......@@ -159,7 +159,7 @@ void AMT630H_GUI_Fault_Information(void)
SetPagePic(GRAPHICS_PAGE_0, Pic_0096_338_228);/*Fault history*/
SetPagePic(GRAPHICS_PAGE_0, Pic_0097_334_163);/*current fault*/
AMT630H_GUI_FaultCode(Get_FaultCode_Lost(),Get_FaultCode_Valid(),Get_Current_Hight_FaultCode(),Get_Current_Mid_FaultCode());
AMT630H_GUI_FaultCode(Get_FaultCode_Lost());
}
/*os MCU版本*/
/* RGB 0 0 0 --- 黑*/
......@@ -186,7 +186,7 @@ void AMT630H_GUI_Fault_Information(void)
SetPagePic(GRAPHICS_PAGE_0, Pic_0356_353_227);/*历史故障*/
SetPagePic(GRAPHICS_PAGE_0, Pic_0357_354_162);/*当前故障*/
AMT630H_GUI_FaultCode(Get_FaultCode_Lost(),Get_FaultCode_Valid(),Get_Current_Hight_FaultCode(),Get_Current_Mid_FaultCode());
AMT630H_GUI_FaultCode(Get_FaultCode_Lost());
}
else if(g_u8Language == EN)
{
......@@ -203,7 +203,7 @@ void AMT630H_GUI_Fault_Information(void)
SetPagePic(GRAPHICS_PAGE_0, Pic_0284_338_228);
SetPagePic(GRAPHICS_PAGE_0, Pic_0285_334_163);/*current fault*/
AMT630H_GUI_FaultCode(Get_FaultCode_Lost(),Get_FaultCode_Valid(),Get_Current_Hight_FaultCode(),Get_Current_Mid_FaultCode());
AMT630H_GUI_FaultCode(Get_FaultCode_Lost());
}
/*os MCU版本*/
/* RGB 0 0 0 --- 黑*/
......@@ -243,30 +243,27 @@ static uint16_t NumbeList_FaultCode_night[]={
uint8_t FaultCodevalid_monitor = 2;
/*故障码显示函数*/
static void AMT630H_GUI_FaultCode(uint8_t FaultCodeLost,uint8_t FaultCodevalid,uint8_t FaultCode_hight,uint8_t FaultCode_mid)
static void AMT630H_GUI_FaultCode(uint8_t FaultCodeLost)
{
if(FaultCodeLost == 1)
{
if(FaultCodevalid == 1)
if(g_u8Display_Mode == ModeDAY)
{
if(g_u8Display_Mode == ModeDAY)
{
/*当前故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 229 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0,0,0,0XFF),TEXT_LINE_OFFSET(1,1));
/*历史故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 164 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0,0,0,0XFF),TEXT_LINE_OFFSET(1,1));
}
else if(g_u8Display_Mode == ModeNIGHT)
{
/*当前故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 229 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0XFF,0XFF,0XFF,0XFF),TEXT_LINE_OFFSET(1,1));
/*历史故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 164 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0XFF,0XFF,0XFF,0XFF),TEXT_LINE_OFFSET(1,1));
}
/*当前故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 229 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0,0,0,0XFF),TEXT_LINE_OFFSET(1,1));
/*历史故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 164 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0,0,0,0XFF),TEXT_LINE_OFFSET(1,1));
}
else if(g_u8Display_Mode == ModeNIGHT)
{
/*当前故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 229 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0XFF,0XFF,0XFF,0XFF),TEXT_LINE_OFFSET(1,1));
/*历史故障*/
PackedTransfer_LabelsList( 0x6009,(uint8_t *)TextFaultCodeNum, 10);
SetPageText(GRAPHICS_PAGE_0, 0x6009, 610 , 164 , 200, ALIGN_LEFT, 0, TEXT_COLOR(0XFF,0XFF,0XFF,0XFF),TEXT_LINE_OFFSET(1,1));
}
}
else if(FaultCodeLost == 0)
......@@ -3059,11 +3056,11 @@ static void AMT630H_GUI_PhoneConnect_Light()
{
SetPagePic(GRAPHICS_PAGE_0, Pic_0472_251_485);
}
if(Get_TelltalesLedSts(em_LED_Oil_Pressure_Alert))
{
SetPagePic(GRAPHICS_PAGE_0, Pic_0466_874_488);
}
if(Get_TelltalesLedSts(em_LED_TCS) == 1)
// if(Get_TelltalesLedSts(em_LED_Oil_Pressure_Alert))
// {
// SetPagePic(GRAPHICS_PAGE_0, Pic_0466_874_488);
// }
if(Get_TelltalesLedSts(em_LED_TCS))
{
SetPagePic(GRAPHICS_PAGE_0, Pic_0473_172_490);
}
......@@ -4924,6 +4921,20 @@ uint8_t VechileSpeed = 0;
uint16_t KL30_VOLTAGE_Value = 0;
void AMT630H_GUI_BACKGRAND()
{
PicObj.qr_logo_id = 0;//Pic_0234 小数字9 EA
PicObj.main_pic_id = Pic_0632; //转速红12
PicObj.update_pic_id = Pic_0233;//小数字8 E9
PicObj.second_menu = 0;
PicObj.navigation_task_id = Pic_0411;//红色小e 19B
if(g_u8Display_Mode == ModeDAY)
{
PicObj.qr_pic_id = Pic_0494;//请使用猎变APP扫码连接
}
else
{
PicObj.qr_pic_id = Pic_1031;//请使用猎变APP扫码连接
}
PackedTransfer_DisplayPhoneMirrorQRcode(0, PicObj);
/*背景图*/
if(g_u8Display_Mode == ModeDAY)
{
......@@ -5216,12 +5227,19 @@ void AMT630H_GUI_SETTING()
/*进入OTA界面执行刷图和发送图片id*/
void AMT630H_GUI_Display_OTA_Page_Information(void)
{
PicObj.qr_logo_id = 0;
PicObj.main_pic_id = Pic_0382;
PicObj.qr_pic_id = Pic_0316;
PicObj.update_pic_id = Pic_0233;
PicObj.qr_logo_id = 0;//Pic_0234 小数字9 EA
PicObj.main_pic_id = Pic_0632; //转速红12
PicObj.update_pic_id = Pic_0233;//小数字8 E9
PicObj.second_menu = 0;
PicObj.navigation_task_id = 0;
PicObj.navigation_task_id = Pic_0411;//红色小e 19B
if(g_u8Display_Mode == ModeDAY)
{
PicObj.qr_pic_id = Pic_0494;//请使用猎变APP扫码连接
}
else
{
PicObj.qr_pic_id = Pic_1031;//请使用猎变APP扫码连接
}
SetPagePic(GRAPHICS_PAGE_0, Pic_0001_0_0);/*图层*/
SetPagePic(GRAPHICS_PAGE_0, Pic_0932_124_85);/*\豪进750TFT（371000 - 7500 - 02TY0000）OTA升级*/
SetPagePic(GRAPHICS_PAGE_0, Pic_0933_101_210);/*\SSID: TYW_DASHBOARD*/
......@@ -5237,10 +5255,17 @@ void AMT630H_GUI_Display_Navigation_Area(void)
DISPLAY_NUM_ST DisplayNumPara;
PicObj.qr_logo_id = 0;//Pic_0234 小数字9 EA
PicObj.main_pic_id = Pic_0632; //转速红12
PicObj.qr_pic_id = Pic_0411;//红色小e 19B
PicObj.update_pic_id = Pic_0233;//小数字8 E9
PicObj.second_menu = 0;
PicObj.navigation_task_id = Pic_0411;//红色小e 19B
if(g_u8Display_Mode == ModeDAY)
{
PicObj.qr_pic_id = Pic_0494;//请使用猎变APP扫码连接
}
else
{
PicObj.qr_pic_id = Pic_1031;//请使用猎变APP扫码连接
}
if (GetPhoneMirrorst() == 0)
{
//DISPLAY_NUM_ST DisplayNumPara;
......@@ -5266,7 +5291,7 @@ void AMT630H_GUI_Display_Navigation_Area(void)
for (uint8_t i = 0; i < 21; i++)
{
DisplayNumPara.x= 786 - i*15;//x坐标
DisplayNum(GRAPHICS_PAGE_0,&DisplayNumPara, UUIDConfigBuf[20-i]);
DisplayNum(GRAPHICS_PAGE_0,&DisplayNumPara, (UUIDConfigBuf[20-i]- 0x30));
}
}
else
......@@ -5292,7 +5317,7 @@ void AMT630H_GUI_Display_Navigation_Area(void)
for (uint8_t i = 0; i < 21; i++)
{
DisplayNumPara.x= 786 - i*15;//x坐标
DisplayNum(GRAPHICS_PAGE_0,&DisplayNumPara, UUIDConfigBuf[20-i]);
DisplayNum(GRAPHICS_PAGE_0,&DisplayNumPara, (UUIDConfigBuf[20-i]- 0x30));
}
}
else
......
Firmware/Source/Component/Analog/Analog_Signals.c
View file @ ee3a95ec
......@@ -4,7 +4,7 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2024/6/18 22:46:57
* Date : 2024/11/6 19:09:16
* Cfg Tool Ver : 1.1.0
* Engineer : ShiHao
* (c) Heilongjiang TYW electronics co., LTD
......@@ -74,7 +74,7 @@ ADC_Data_st_t stADCData[ADC_SIGNAL_CH_NUMBER];
const uint8_t __attribute__((aligned(4))) u8ADCChList[ADC_CONV_CH_NUMBER] =
{
2U, 3U, 7U, 5U, 6U, 4U, 12U,
2U, 3U, 7U, 5U, 6U, 12U, 11U, 4U,
};
const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
......@@ -84,9 +84,9 @@ const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBE
{ 2U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 3U, 2U, 0U, 2U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 4U, 2U, 0U, 2U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 5U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
{ 6U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 5U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 6U, 3U, 0U, 5000U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 7U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
};
const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
......@@ -96,8 +96,9 @@ const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_N
{ 0U, 0U, 0U, 0U,},
{ 0U, 0U, 500U, 300U,},
{ 0U, 0U, 500U, 0U,},
{ 0U, 100000U, 0U, 0U,},
{ 47000U, 0U, 47000U, 0U,},
{ 47000U, 0U, 100000U, 0U,},
{ 0U, 100000U, 0U, 0U,},
};
/* Private function prototypes ----------------------------------------------*/
......@@ -175,7 +176,7 @@ void Analog_Signal_Conv_Service(void)
if (stADCCtrl.u8DebounceCnt == 0U)
{
stADCCtrl.enStatus = ADC_STAT_CONV;
stADCCtrl.enStatus = ADC_STAT_CONV;
}
else
{
......
Firmware/Source/Component/Analog/Analog_Signals.h
View file @ ee3a95ec
......@@ -4,7 +4,7 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2024/6/18 22:46:57
* Date : 2024/11/6 19:09:16
* Cfg Tool Ver : 1.1.0
* Engineer : ShiHao
* (c) Heilongjiang TYW electronics co., LTD
......@@ -33,13 +33,14 @@ enum ADCChName
ADC_CH_FUEL_VREF,
ADC_CH_FUEL1,
ADC_CH_COOLANT_TEMP1_R,
ADC_CH_NTC_TEMP,
ADC_CH_LIGHT_SENSITIVE,
ADC_CH_OIL_PRESSURE_R,
ADC_CH_NTC_TEMP,
};
/* Exported macro ------------------------------------------------------------*/
#define ADC_TOTAL_CH_NUMBER (7U)
#define ADC_SIGNAL_CH_NUMBER (7U)
#define ADC_TOTAL_CH_NUMBER (8U)
#define ADC_SIGNAL_CH_NUMBER (8U)
#define ADC_REF_VOLTAGE u16ADCRefVoltage
/* Exported variables --------------------------------------------------------*/
......
Firmware/Source/Component/Components.h
View file @ ee3a95ec
......@@ -28,6 +28,7 @@
#include "Data_VSpeed.h"
#include "Data_Coolant.h"
#include "Data_Fuel.h"
#include "Data_OilPressure.h"
#include "Hysteresis.h"
#include "Mileage\Services_Mileage_User.h"
#include "BackLight.h"
......
Firmware/Source/Component/Key/Key_user.c
View file @ ee3a95ec
This diff is collapsed.
Firmware/Source/Component/Key/Key_user.h
View file @ ee3a95ec
......@@ -62,6 +62,8 @@ Key_Status_en_t Key_Status_Read_Left(void);
Key_Status_en_t Key_Status_Read_Right(void);
void Key_Event_Short_Press_Left(void);
void Key_Event_Short_Press_Right(void);
void Key_Event_SHORT_PRESS_2_Right(void);
void Key_Event_BackLight_Press_Left(void);
void Get_Into_OTA_Update_Mode(void);
void KEY_RIGHT_EVENT_NONE_Service(void);
void KEY_LEFT_EVENT_NONE_Service(void);
......
Firmware/Source/Component/Line_In/Line_In_user.c
View file @ ee3a95ec
......@@ -9,7 +9,7 @@ const Line_In_Attribute_st g_stLineInAttribute[LINE_IN_MAX] =
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 20U, 20U, Get_LINE_IN_Turn_Right, },/*P9*/
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 40U, 20U, Get_LINE_IN_High_Beam, },/*P18*/
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 125U, 20U, Get_LINE_IN_Efi_Fault, },/*P15*/
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 125U, 0U, Get_LINE_IN_ABS, },/*P7*/
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 170U, 0U, Get_LINE_IN_ABS, },/*P7*/
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 125U, 20U, Get_LINE_IN_Auto_Start_Stop, },/*P12*/
{LEVEL_HIGH, LEVEL_LOW, LINE_IN_IG_ON, 2000U, 20U, Get_LINE_IN_Oil_Pressure_Alert, },/*P21*/
{LEVEL_LOW, LEVEL_HIGH, LINE_IN_IG_ON, 125U, 20U, Get_LINE_IN_Coolant_Temperature }, /*P11*/
......@@ -95,13 +95,13 @@ Linelib_uint8_t Get_LINE_IN_Auto_Start_Stop(void)
Linelib_uint8_t Get_LINE_IN_Oil_Pressure_Alert(void)
{
Linelib_uint8_t ret = 0U;
if (RTE_GPIO_Get_Level(Gears_N_MCU))
if (Get_OilPressureStauts())
{
ret = 1u;
ret = 0u;
}
else
{
ret = 0UL;
ret = 1UL;
}
return ret;
}
......
Firmware/Source/Component/Menu/Menu_Interface.c
View file @ ee3a95ec
......@@ -65,11 +65,11 @@ void Menu_User_Init(void)
Menu_Init_st.enMenuItemLen = MENU_ITEM_MAX;
Menu_Init_st.uintMenuConfig = 0x0001;
Menu_Init_st.uintMenuCursorMemoryDepth = 0;
Menu_Init((uint8_t *)u8MenuRamData, (Menu_Item_Attribute_st_t *)stMenuItemAttribute, (Menu_Init_st_t *)&Menu_Init_st);
Menu_Item_Select_Set(MENU_ITEM_SELECT_DAYTIME, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 1);
Menu_Item_Select_Set(MENU_ITEM_UNIT_KM, 1);
Menu_Item_Select_Set(MENU_ITEM_LANGUAGE_CHINESE, 1);
Menu_Init((uint8_t *)u8MenuRamData, (Menu_Item_Attribute_st_t *)stMenuItemAttribute, (Menu_Init_st_t *)&Menu_Init_st);
}
void Menu_User_WAKEUP(void)
......@@ -80,11 +80,11 @@ void Menu_User_WAKEUP(void)
Menu_Init_st.enMenuItemLen = MENU_ITEM_MAX;
Menu_Init_st.uintMenuConfig = 0x0001;
Menu_Init_st.uintMenuCursorMemoryDepth = 0;
Menu_Wake_Up_Init((uint8_t *)u8MenuRamData, (Menu_Item_Attribute_st_t *)stMenuItemAttribute, (Menu_Init_st_t *)&Menu_Init_st);
Menu_Item_Select_Set(MENU_ITEM_SELECT_DAYTIME, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 1);
Menu_Item_Select_Set(MENU_ITEM_UNIT_KM, 1);
Menu_Item_Select_Set(MENU_ITEM_LANGUAGE_CHINESE, 1);
Menu_Wake_Up_Init((uint8_t *)u8MenuRamData, (Menu_Item_Attribute_st_t *)stMenuItemAttribute, (Menu_Init_st_t *)&Menu_Init_st);
}
/*---------------------------------------------------------------------------------------*/
......@@ -232,80 +232,80 @@ void Menu_Logic_Operation_Select_Auto(Menu_Key_en_t enKeyType)
void Menu_Logic_Operation_Backlight_5(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 1);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
// }
}
void Menu_Logic_Operation_Backlight_4(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 1);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
// }
}
void Menu_Logic_Operation_Backlight_3(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 1);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
// }
}
void Menu_Logic_Operation_Backlight_2(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 1);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
// }
}
void Menu_Logic_Operation_Backlight_1(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 1);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 1);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 0);
// }
}
void Menu_Logic_Operation_Backlight_Auto(Menu_Key_en_t enKeyType)
{
if(enKeyType == MENU_KEY_CONFIRM_SHORT)
{
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 1);
}
// if(enKeyType == MENU_KEY_CONFIRM_SHORT)
// {
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_5, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_4, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_3, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_2, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_1, 0);
// Menu_Item_Select_Set(MENU_ITEM_BACKLIGHT_AUTO, 1);
// }
}
void Menu_Logic_Operation_Bluetooth_Open_Close(Menu_Key_en_t enKeyType)
......
Firmware/Source/Component/Mileage/Services_Mileage_User.c
View file @ ee3a95ec
......@@ -17,13 +17,13 @@ uint8_t odo_readState;
static uint32_t Data_User_EEPROM_Read(uint16_t u16BlockID, uint32_t u32Data[], uint16_t u16Len);
static void Data_User_EEPROM_Write(Data_EEPROM_Enum_t BlockID, uint32_t u32Data[], uint16_t u16Len);
#define EEPROM_BLOCK_00 0
#define EEPROM_BLOCK_01 16
#define EEPROM_BLOCK_02 32
#define EEPROM_BLOCK_03 48
#define EEPROM_BLOCK_04 64
#define EEPROM_BLOCK_05 80
#define EEPROM_BLOCK_06 96
#define EEPROM_BLOCK_00 0x00
#define EEPROM_BLOCK_01 0x20
#define EEPROM_BLOCK_02 0x40
#define EEPROM_BLOCK_03 0x60
#define EEPROM_BLOCK_04 0x80
#define EEPROM_BLOCK_05 0xC0
#define EEPROM_BLOCK_06 0xE0
......
Firmware/Source/Component/PowerManagement/PowerManag_user.c
View file @ ee3a95ec
......@@ -55,6 +55,7 @@ static void Power_KL30_Init(void)
Key_KL30_Init_EXample();
Data_User_Mileage_KL30Init();
Fuel_KL30_Init();
Oil_Pressure_KL30_Init();
BackLight_30_Init();
Amt630hInit();
Telltales_Init();
......@@ -91,6 +92,7 @@ static void Power_Wakeup_Init(void)
Key_Wakeup_Init_EXample();
Line_In_KL15_ON_Init();
Fuel_KL30_Init();
Oil_Pressure_KL30_Init();
BackLight_WakeUp_Init();
RTE_UART_Sleep_Init(UART_CH2);
loc_config.u32UARTChEn = 1U;
......@@ -123,6 +125,8 @@ static void Power_IG_OFF_Init(void)
{
Line_In_KL15_OFF_Init();
BackLight_15_Init();
BlueTooth_IGOFF_INIT();
Menu_Change_Branch_To_Item(MENU_BRANCH_ANIMATION,MENU_ITEM_MAIN_ITEM);
}
static void Power_IG_ON_Init(void)
......@@ -131,6 +135,7 @@ static void Power_IG_ON_Init(void)
Line_In_KL15_ON_Init();
Telltales_KL15_Init();
Fuel_KL15_Init();
Oil_Pressure_KL15_Init();
TEMP_KL15_Init();
//RTE_GPIO_Set_Level(Blacklight_PWM, 1);
FaultCode_Init();
......@@ -212,7 +217,7 @@ static Power_Status_em Power_Stay_Protect(void)
/* 关闭所有外设，坪保留AD采集，电溝状思切�? */
{
TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 0);
//CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Disable);
CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Disable);
}
u8PowerSts = EM_IGN_OFF_Init;
/* 电溝模弝正常 */
......@@ -226,7 +231,7 @@ static Power_Status_em Power_Stay_Protect(void)
if ( SYS_OPR_STAT_RUN )
{
Amt630hInit();
//CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
CAN_TX_SetEnable(&CAN_CH0_CanMsgTxOp, CAN_N_TX_Enable);
return u8PowerSts;
}
......
Firmware/Source/Device/Cmsemicon/BAT32A279/RTE/CAN/rte_can.c
View file @ ee3a95ec
......@@ -68,6 +68,7 @@ uint8_t rte_can_init(can_config_st_t *config)
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStruct.GPIO_Level = GPIO_Level_HIGH;
GPIO_InitStruct.GPIO_Ctrl = GPIO_Control_DIG;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_Init(GPIO_PORT5, &GPIO_InitStruct);
/* CRXD pin init */
......
Firmware/Source/System/Sys_Task_List.c
View file @ ee3a95ec
......@@ -20,7 +20,7 @@ void Sys_2ms_Tasks(void)
Sys_Status_Update_Service();
Analog_Signal_Conv_Service();
AMT630H_Main();
Check_MCU_Info_in_630H();
// Check_MCU_Info_in_630H();
DoCAN_Timer_Update(2000u);
//Can_Write_Fun(&CAN_CH0_CanMsgTxOp, 2000u);无外发
CanMSg_XMS_Analysis(&CAN_CH0_CanMsgOp, 2u);
......@@ -34,13 +34,14 @@ void Sys_5ms_Tasks(void)
void Sys_10ms_Tasks(void)
{
Can_BusOff_Recover(10);
FaultCode_Service(10u);
FaultCode_Servers();
Line_In_Debounce_Service(10u);
My_Key_Service();
Data_Mileage_Write_EEPROM();
Key_Clear_Time();
Key_TimeOut_Service();
Fuel_R_Cal(10u);
Oil_R_Cal(10u);
Data_Light_Res_service(10);
BackLight_Process();
}
......@@ -73,10 +74,6 @@ void Sys_50ms_Tasks(void)
VechileSpeed_time++;
}
uint32_t ODOtest = 0;
uint32_t Triptest = 0;
uint32_t aaa = 0;
void Sys_100ms_Tasks(void)
{
BlueToothService();
......@@ -85,7 +82,7 @@ void Sys_100ms_Tasks(void)
Fuel_Cal_Sevice(100u);
Services_Mileage_Callback();
// Data_Mileage_Clear();
RTE_GPIO_Config(RTE_GPIO_PORT05_PIN04, GpioOut_High);
// RTE_GPIO_Config(RTE_GPIO_PORT05_PIN04, GpioOut_High);
//BackLight_Process();
//TimerM_PWM_set_duty(TIMERM_COUNTER1, TIMERM_CHB, 100);
......
Firmware/utility/MCU_Cfg/inc/Analog_Signals.h
View file @ ee3a95ec
......@@ -4,7 +4,7 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2024/6/18 22:46:57
* Date : 2024/11/9 15:54:41
* Cfg Tool Ver : 1.1.0
* Engineer : ShiHao
* (c) Heilongjiang TYW electronics co., LTD
......@@ -33,11 +33,14 @@ enum ADCChName
ADC_CH_FUEL_VREF,
ADC_CH_FUEL1,
ADC_CH_COOLANT_TEMP1_R,
ADC_CH_LIGHT_SENSITIVE,
ADC_CH_OIL_PRESSURE_R,
ADC_CH_NTC_TEMP,
};
/* Exported macro ------------------------------------------------------------*/
#define ADC_TOTAL_CH_NUMBER (5U)
#define ADC_SIGNAL_CH_NUMBER (5U)
#define ADC_TOTAL_CH_NUMBER (8U)
#define ADC_SIGNAL_CH_NUMBER (8U)
#define ADC_REF_VOLTAGE u16ADCRefVoltage
/* Exported variables --------------------------------------------------------*/
......
Firmware/utility/MCU_Cfg/src/Analog_Signals.c
View file @ ee3a95ec
......@@ -4,7 +4,7 @@
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2024/6/18 22:46:57
* Date : 2024/11/9 15:54:41
* Cfg Tool Ver : 1.1.0
* Engineer : ShiHao
* (c) Heilongjiang TYW electronics co., LTD
......@@ -74,7 +74,7 @@ ADC_Data_st_t stADCData[ADC_SIGNAL_CH_NUMBER];
const uint8_t __attribute__((aligned(4))) u8ADCChList[ADC_CONV_CH_NUMBER] =
{
2U, 3U, 7U, 5U, 6U,
2U, 3U, 7U, 5U, 6U, 12U, 11U, 4U,
};
const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
......@@ -84,6 +84,9 @@ const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBE
{ 2U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 3U, 2U, 0U, 2U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 4U, 2U, 0U, 2U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 5U, 0U, 0U, 0U, 0U, 1U, ADC_Voltage_Calc_Circuit101,},
{ 6U, 3U, 0U, 5000U, 0U, 1U, ADC_Res_Calc_Circuit101,},
{ 7U, 3U, 0U, 5000U, 0U, 10U, ADC_Res_Calc_Circuit201,},
};
const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
......@@ -93,6 +96,9 @@ const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_N
{ 0U, 0U, 0U, 0U,},
{ 0U, 0U, 500U, 300U,},
{ 0U, 0U, 500U, 0U,},
{ 0U, 100000U, 0U, 0U,},
{ 47000U, 0U, 47000U, 0U,},
{ 47000U, 0U, 100000U, 0U,},
};
/* Private function prototypes ----------------------------------------------*/
......
Firmware/utility/MCU_Cfg/src/Analog_Signals.h deleted 100644 → 0
View file @ c4794fb2
/**************************************************************************//**
* \file Analog_Signals.h
* \brief Analog signal processing
* \attention
*
* This file is automatically generated by analog signals configuration tool.
* Date : 2024/6/18 22:46:57
* Cfg Tool Ver : 1.1.0
* Engineer : ShiHao
* (c) Heilongjiang TYW electronics co., LTD
*
******************************************************************************/
#ifndef ANALOG_SIGNALS_H__
#define ANALOG_SIGNALS_H__
/* Includes -----------------------------------------------------------------*/
#include "ADC.h"
#include "Analog_Circuits.h"
#include "RTE.h"
/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern {
#endif
/*! @{ */
/* Exported types ------------------------------------------------------------*/
enum ADCChName
{
ADC_CH_KL30_VOLTAGE = 0,
ADC_CH_KL15_VOLTAGE,
ADC_CH_FUEL_VREF,
ADC_CH_FUEL1,
ADC_CH_COOLANT_TEMP1_R,
};
/* Exported macro ------------------------------------------------------------*/
#define ADC_TOTAL_CH_NUMBER (5U)
#define ADC_SIGNAL_CH_NUMBER (5U)
#define ADC_REF_VOLTAGE u16ADCRefVoltage
/* Exported variables --------------------------------------------------------*/
extern volatile uint16_t u16ADCRefVoltage;
extern const uint8_t u8ADCChList[];
/* Exported functions --------------------------------------------------------*/
extern void Analog_Signal_Conv_Init(void);
extern void Analog_Signal_Conv_Stop(void);
extern void Analog_Signal_Conv_Service(void);
extern uint16_t ADC_Read_Signal(uint8_t u8ADCCh);
extern uint8_t ADC_Read_Signal_Valid(uint8_t u8ADCCh);
extern uint16_t ADC_Conv_Single_Channel(uint8_t u8ADCCh);
/*! @} */
#ifdef __cplusplus
}
#endif
#endif /* ANALOG_SIGNALS_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment