#include "Telltales_Lib.h"
#include "Telltales_user.h"
#include "Line_In\Line_In_user.h"
#include "Components.h"
static Tellib_uint16_t LED_Turn_Left_Judgement(void);
static void LED_Turn_Left_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Turn_Right_Judgement(void);
static void LED_Turn_Right_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_High_Beam_Judgement(void);
static void LED_High_Beam_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Efi_Fault_Judgement(void);//电喷故障灯
static void LED_Efi_Fault_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_ABS_Judgement(void);
static void LED_ABS_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Auto_Start_Stop_Judgement(void);
static void LED_Auto_Start_Stop_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Oil_Pressure_Alert_Judgement(void);
static void LED_Oil_Pressure_Alert_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_TCS_Judgement(void);
static void LED_TCS_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_HEV_Judgement(void);
static void LED_HEV_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Voltage_Judgement(void);
static void LED_Voltage_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Fuel_Level_Low_Judgement(void);
static void LED_Fuel_Level_Low_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Coolant_Temperature_Judgement(void);
static void LED_Coolant_Temperature_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_WIFI_Judgement(void);
static void LED_WIFI_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_Bluetooth_Judgement(void);
static void LED_Bluetooth_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_E_Judgement(void);
static void LED_E_Execution(Tellib_uint16_t led_status);
static Tellib_uint16_t LED_S_Judgement(void);
static void LED_S_Execution(Tellib_uint16_t led_status);
uint8_t u8CanId401Flag = 0;
const LED_Attribute_st LED_Attribute [ LED_Max ] = {
/* 指示灯索引 是否自检 外部信号自检 工作电源状态 自检开始时间 自检持续时间 指示灯点亮条件 指示灯执行函数 */
{em_LED_Turn_Left, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Turn_Left_Judgement, LED_Turn_Left_Execution },
{em_LED_Turn_Right, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Turn_Right_Judgement, LED_Turn_Right_Execution },
{em_LED_High_Beam, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_High_Beam_Judgement, LED_High_Beam_Execution },
{em_LED_Efi_Fault, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Efi_Fault_Judgement, LED_Efi_Fault_Execution },
{em_LED_ABS, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_ABS_Judgement, LED_ABS_Execution },
{em_LED_Auto_Start_Stop, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Auto_Start_Stop_Judgement, LED_Auto_Start_Stop_Execution },
{em_LED_Oil_Pressure_Alert, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Oil_Pressure_Alert_Judgement, LED_Oil_Pressure_Alert_Execution },
{em_LED_TCS, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_TCS_Judgement, LED_TCS_Execution },
{em_LED_HEV, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_HEV_Judgement, LED_HEV_Execution },
{em_LED_Voltage, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Voltage_Judgement, LED_Voltage_Execution },
{em_LED_Fuel_Level_Low, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Fuel_Level_Low_Judgement, LED_Fuel_Level_Low_Execution },
{em_LED_Coolant_Temperature, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Coolant_Temperature_Judgement, LED_Coolant_Temperature_Execution },
{em_LED_WIFI, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_WIFI_Judgement, LED_WIFI_Execution },
{em_LED_Bluetooth, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_Bluetooth_Judgement, LED_Bluetooth_Execution },
{em_LED_E, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_E_Judgement, LED_E_Execution },
{em_LED_S, SelfCheck, NoExterNalCheck, LED_IGN_ON, 0u, 3000ul, LED_S_Judgement, LED_S_Execution },
};
Tellib_uint8_t Tel_Mem [ Tel_MEM_Block_Size * LED_Max + Tel_MEM_Block_Addition ];
void Telltales_Init(void)
{
TelExtPara m_ExtPara;
m_ExtPara.TotalLength = LED_Max;
m_ExtPara.LED_PowerOFF_TimerCbk = Common_GetIgnOffTime;
m_ExtPara.LED_PowerON_TimerCbk = Common_GetIgnOnTime;
m_ExtPara.LED_PowerCbk = Common_Get_IG_Sts;
u8CanId401Flag = 0;
Telltales_KL30_Wakeup_Init(Tel_Mem, LED_Attribute, &m_ExtPara);
}
void Can_ID_401(uint8_t CopyData [])
{
u8CanId401Flag = 1;
}
/******************************************************************************************************************************************************************************************************************* */
static Tellib_uint16_t LED_Turn_Left_Judgement(void)//硬线－P10 高电平
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Turn_Left))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Turn_Left_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(TurnLeft_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(TurnLeft_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线－P9 高电平*/
static Tellib_uint16_t LED_Turn_Right_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Turn_Right))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Turn_Right_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(TurnRight_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(TurnRight_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线－P18 高电平*/
static Tellib_uint16_t LED_High_Beam_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_High_Beam))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_High_Beam_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(HighBeam_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(HighBeam_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线-P15 低电平*/
static Tellib_uint16_t LED_Efi_Fault_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Efi_Fault))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Efi_Fault_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(EfiFault_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(EfiFault_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线-P7 悬空/高点亮 接地灭*/
static Tellib_uint16_t LED_ABS_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_ABS))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_ABS_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(ABS_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(ABS_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线－P12 低电平*/
static Tellib_uint16_t LED_Auto_Start_Stop_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Auto_Start_Stop))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Auto_Start_Stop_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(AutoStartStop_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(AutoStartStop_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线－P21 低电平*/
static Tellib_uint16_t LED_Oil_Pressure_Alert_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Oil_Pressure_Alert))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Oil_Pressure_Alert_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(OilPressureAlert_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(OilPressureAlert_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*CAN信号来源：TCS_37B*/
static Tellib_uint16_t LED_TCS_Judgement(void)
{
//Tellib_uint16_t LED_STATE = 0u;
//if (CAN_MSG_Status(&CAN_CH0_CanMsgOp, CAN_CH0_ID_CH0_37B_Msg_Count) == CAN_SIG_LOST)
//{
// LED_STATE = 0u;
//}
//else
//{
// if(Get_CAN_CH0_ID_37B_Sig_TCS_Work_Mode() == 1)
// {
// LED_STATE = 1u;
// }
// else
// {
// LED_STATE = 0u;
// }
//}
//return LED_STATE;
}
static void LED_TCS_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(TCS_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(TCS_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*信号来源：ISG_111*/
static Tellib_uint16_t LED_HEV_Judgement(void)
{
//Tellib_uint16_t LED_STATE = 0u;
//if (CAN_MSG_Status(&CAN_CH0_CanMsgOp, CAN_CH0_ID_CAN_0x402_Msg_Count) == CAN_SIG_LOST)
//{
// LED_STATE = 0u;
//}
//else
//{
// if( == 1)
// {
// LED_STATE = 1u;
// }
// else
// {
// LED_STATE = 0u;
// }
//}
//return LED_STATE;
}
static void LED_HEV_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(HEV_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(HEV_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线-P19 电压值*/
static Tellib_uint16_t LED_Voltage_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Voltage))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Voltage_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(Voltage_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(Voltage_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*硬线P14－阻值*/
static Tellib_uint16_t LED_Fuel_Level_Low_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
if (Line_In_Get_Status(LINE_IN_Fuel_Level_Low))
{
LED_STATE = 1;
}
else
{
LED_STATE = 0;
}
return LED_STATE;
}
static void LED_Fuel_Level_Low_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(FuelLevelLow_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(FuelLevelLow_MUC_OUT, LED_LINEOUT_Low);
// }
}//
/*信号来源：ECU_101 +硬线-P11 阻值 CAN>硬线*/
static Tellib_uint16_t LED_Coolant_Temperature_Judgement(void)
{
}
static void LED_Coolant_Temperature_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(CoolantTemperature_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(CoolantTemperature_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*无*/
static Tellib_uint16_t LED_WIFI_Judgement(void)
{
Tellib_uint16_t LED_STATE = 0u;
// if (Line_In_Get_Status(LINE_IN_WIFI))
// {
// LED_STATE = 1;
// }
// else
// {
// LED_STATE = 0;
// }
return LED_STATE;
}
static void LED_WIFI_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(WIFI_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(WIFI_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*信号来源：蓝牙模块*/
static Tellib_uint16_t LED_Bluetooth_Judgement(void)
{
// Tellib_uint16_t LED_STATE = 0u;
// if (Line_In_Get_Status(LINE_IN_Bluetooth))
// {
// LED_STATE = 1;
// }
// else
// {
// LED_STATE = 0;
// }
// return LED_STATE;
}
static void LED_Bluetooth_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(Bluetooth_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(Bluetooth_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*信号来源：0x111*/
static Tellib_uint16_t LED_E_Judgement(void)
{
}
static void LED_E_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(E_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(E_MUC_OUT, LED_LINEOUT_Low);
// }
}
/*信号来源：0x111*/
static Tellib_uint16_t LED_S_Judgement(void)
{
}
static void LED_S_Execution(Tellib_uint16_t led_status)
{
// if (led_status == 1u)
// {
// RTE_GPIO_Set_Level(S_MUC_OUT, LED_LINEOUT_High);
// }
// else
// {
// RTE_GPIO_Set_Level(S_MUC_OUT, LED_LINEOUT_Low);
// }
}