feat: 屏蔽打印；关闭log等级；修改欠压电压为2.67V

qianjiang/main/Protocol_User.c

@@ -217,7 +217,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)
         if(Prot_User.State < Prot_Start)
         {
             Prot_User.State = Prot_Start;
-            printf("Prot_Start \r\n");
+            // printf("Prot_Start \r\n");
         }
     }
     else if(pData->CmdID == 0x03 )
@@ -227,7 +227,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)
         {
             Prot_User.State = Prot_Normal;
 
-            printf("Prot_Normal \r\n");
+            // printf("Prot_Normal \r\n");
         }
 
         if(Prot_User.State >= Prot_Start)
@@ -251,7 +251,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)
                 {
                     bsp_Ble_Init();
 
-                    printf("get uuid and init ble!!! \r\n");
+                    // printf("get uuid and init ble!!! \r\n");
                 }
 
                 Ble_User.UseridUpdate = 0xAA;
@@ -268,7 +268,7 @@ static void Protocol_UartHandle(const Protocol_Data_t *pData)
                 if(Wifi_OTA_Request == 0)
                 {
                     Wifi_OTA_Request = 1;
-                    printf("get ota req! \r\n");
+                    // printf("get ota req! \r\n");
                 }
             // }
         }

qianjiang/main/app_BT_User.c

@@ -28,7 +28,7 @@ void BT_Connect_Event_Pro(void )
     BT_User.Call_Sts = Call_Idle;
     BT_User.ReconnTime = BT_ReConn_T - 500;
     BT_User.HF_Ctrl = HF_Idle;
-    printf("TB CONN\r\n");
+    // printf("TB CONN\r\n");
 }
 
 
@@ -38,7 +38,7 @@ void BT_DisConnect_Event_Pro(void )
     BT_User.Call_Sts = Call_Idle;
     BT_User.ReconnTime = BT_ReConn_T - 500;
     BT_User.HF_Ctrl = HF_Idle;
-    printf("TB DISCONN\r\n");
+    // printf("TB DISCONN\r\n");
 }
 
 void BT_User_Process(void )
@@ -88,13 +88,13 @@ void BT_User_Process(void )
         BT_User.ReconnTime++;
         if(BT_User.ReconnTime >= BT_ReConn_T)
         {
-            printf("Connect Start.................\n");
+            // printf("Connect Start.................\n");
             if(app_BT_Get_BondDev() == 1)
             {
                 esp_hf_client_connect(peer_addr);
             }
             
-            printf("Connect Over\n");
+            // printf("Connect Over\n");
 
             BT_User.ReconnTime = 0;
         }

qianjiang/main/app_Ble_User.c

@@ -322,7 +322,7 @@ void Ble_MsgRec_Authr_Result_Analysis(void )
         Ble_User.Ble_Sts = Ble_Authr;
         Ble_User.Request_Navi = 1;
 
-        printf("Authr suc\n");
+        // printf("Authr suc\n");
     }
 }
 
@@ -392,6 +392,7 @@ void Ble_Msg_RequestNavi_RLY(void )
 
 void Ble_MsgRec_Navi_Analysis(void )
 {
+    uint32_t aaa = 0;
     //Navi data
     Ble_Navi_Data.Navi_Sts = BleRecData.Msg.Param[0];
     Ble_Navi_Data.Navi_Turn = BleRecData.Msg.Param[1];
@@ -401,8 +402,24 @@ void Ble_MsgRec_Navi_Analysis(void )
     Ble_Navi_Data.Navi_Dte[3] = BleRecData.Msg.Param[5];
 
 
-    printf("Navi sts %d    Navi_Turn %x   Navi_Dte0 %x   Navi_Dte1 %x   Navi_Dte2 %x   Navi_Dte3 %x\r\n", \
-    Ble_Navi_Data.Navi_Sts, Ble_Navi_Data.Navi_Turn, Ble_Navi_Data.Navi_Dte[0], Ble_Navi_Data.Navi_Dte[1], Ble_Navi_Data.Navi_Dte[2],Ble_Navi_Data.Navi_Dte[3]);
+    // printf("Navi sts %d    Navi_Turn %x   Navi_Dte0 %x   Navi_Dte1 %x   Navi_Dte2 %x   Navi_Dte3 %x\r\n", 
+    // Ble_Navi_Data.Navi_Sts, Ble_Navi_Data.Navi_Turn, Ble_Navi_Data.Navi_Dte[0], Ble_Navi_Data.Navi_Dte[1], Ble_Navi_Data.Navi_Dte[2],Ble_Navi_Data.Navi_Dte[3]);
+
+    aaa = Ble_Navi_Data.Navi_Dte[3];
+    aaa <<= 8;
+    aaa |= Ble_Navi_Data.Navi_Dte[2];
+    aaa <<= 8;
+    aaa |= Ble_Navi_Data.Navi_Dte[1];
+    aaa <<= 8;
+    aaa |= Ble_Navi_Data.Navi_Dte[0];
+
+
+    // printf("navi sts = %x; navi turn = %d; navi dest = %ld\n", Ble_Navi_Data.Navi_Sts, Ble_Navi_Data.Navi_Turn, aaa);
+
+
+    // printf("Navi sts %d    Navi_Turn %x   Navi_Dte0 %x   Navi_Dte1 %x   Navi_Dte2 %x   Navi_Dte3 %x\r\n", 
+    // Ble_Navi_Data.Navi_Sts, Ble_Navi_Data.Navi_Turn, Ble_Navi_Data.Navi_Dte[0], Ble_Navi_Data.Navi_Dte[1], Ble_Navi_Data.Navi_Dte[2],Ble_Navi_Data.Navi_Dte[3]);
+
 
     Ble_User.Navi_Updat = 1;
     Ble_User.Navi_T = 0;

qianjiang/main/bt_app_hf.c

@@ -335,12 +335,12 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
             {
                 BT_User.Call_Sts = Call_Idle;
 
-                printf("call idle\r\n");
+                // printf("call idle\r\n");
             }
             else if(param->call.status == 1)
             {
                 BT_User.Call_Sts = Call_InProcess;
-                printf("call Call_InProcess\r\n");
+                // printf("call Call_InProcess\r\n");
             }
             break;
         }
@@ -358,7 +358,7 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
                     {
                         BT_User.Call_Sts = Call_Idle;
 
-                        printf("call idle\r\n");
+                        // printf("call idle\r\n");
                     }
                     break;
                 }
@@ -366,19 +366,19 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
                 {
                     BT_User.Call_Sts = Call_IncomeCalling;
 
-                    printf("call income\r\n");
+                    // printf("call income\r\n");
                     break;
                 }
                 case 2:
                 {
                     BT_User.Call_Sts = Call_OutCalling;
-                    printf("call outcall\r\n");
+                    // printf("call outcall\r\n");
                     break;
                 }
                 case 3:
                 {
                     BT_User.Call_Sts = Call_OutCalling;
-                    printf("call outcall\r\n");
+                    // printf("call outcall\r\n");
                     break;
                 }
             }
@@ -480,42 +480,42 @@ void bt_app_hf_client_cb(esp_hf_client_cb_event_t event, esp_hf_client_cb_param_
 
 HF_CMD_HANDLER(conn)
 {
-    printf("connect\n");
+    // printf("connect\n");
     esp_hf_client_connect(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(disc)
 {
-    printf("disconnect\n");
+    // printf("disconnect\n");
     esp_hf_client_disconnect(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(conn_audio)
 {
-    printf("connect audio\n");
+    // printf("connect audio\n");
     esp_hf_client_connect_audio(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(disc_audio)
 {
-    printf("disconnect audio\n");
+    // printf("disconnect audio\n");
     esp_hf_client_disconnect_audio(peer_addr);
     return 0;
 }
 
 HF_CMD_HANDLER(query_op)
 {
-    printf("Query operator\n");
+    // printf("Query operator\n");
     esp_hf_client_query_current_operator_name();
     return 0;
 }
 
 HF_CMD_HANDLER(answer)
 {
-    printf("Answer call\n");
+    // printf("Answer call\n");
     esp_hf_client_answer_call();
     return 0;
 }
@@ -523,21 +523,21 @@ HF_CMD_HANDLER(reject)
 {
     esp_err_t err;
     err = esp_hf_client_reject_call();
-    printf("Reject call err %d\n",err);
+    // printf("Reject call err %d\n",err);
     return 0;
 }
 
 const char test_dial_num[] = "17800536969";
 HF_CMD_HANDLER(dial)
 {
-    printf("Dial number %s\n", test_dial_num);
+    // printf("Dial number %s\n", test_dial_num);
     esp_hf_client_dial(test_dial_num);
     return 0;
 }
 
 HF_CMD_HANDLER(redial)
 {
-    printf("Dial number\n");
+    // printf("Dial number\n");
     esp_hf_client_dial(NULL);
     return 0;
 }
@@ -552,14 +552,14 @@ HF_CMD_HANDLER(dial_mem)
 
 HF_CMD_HANDLER(start_vr)
 {
-    printf("Start voice recognition\n");
+    // printf("Start voice recognition\n");
     esp_hf_client_start_voice_recognition();
     return 0;
 }
 
 HF_CMD_HANDLER(stop_vr)
 {
-    printf("Stop voice recognition\n");
+    // printf("Stop voice recognition\n");
     esp_hf_client_stop_voice_recognition();
     return 0;
 }
@@ -567,21 +567,21 @@ HF_CMD_HANDLER(stop_vr)
 
 // HF_CMD_HANDLER(query_call)
 // {
-//     printf("Query current call status\n");
+//     // printf("Query current call status\n");
 //     esp_hf_client_query_current_calls();
 //     return 0;
 // }
 
 // HF_CMD_HANDLER(retrieve_subscriber)
 // {
-//     printf("Retrieve subscriber information\n");
+//     // printf("Retrieve subscriber information\n");
 //     esp_hf_client_retrieve_subscriber_info();
 //     return 0;
 // }
 
 // HF_CMD_HANDLER(request_last_voice_tag)
 // {
-//     printf("Request last voice tag\n");
+//     // printf("Request last voice tag\n");
 //     esp_hf_client_request_last_voice_tag_number();
 //     return 0;
 // }
@@ -598,7 +598,7 @@ HF_CMD_HANDLER(btrh)
 {
     int btrh = ESP_HF_BTRH_CMD_HOLD;
 
-    printf("respond and hold command: %d\n", btrh);
+    // printf("respond and hold command: %d\n", btrh);
     esp_hf_client_send_btrh_cmd(btrh);
     return 0;
 }

qianjiang/main/gatts_table_creat_demo.c

@@ -534,7 +534,7 @@ static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param
             if (adv_config_done == 0){
                 esp_ble_gap_start_advertising(&adv_params);
 
-                printf("adv 1\r\n");
+                // printf("adv 1\r\n");
             }
             break;
         case ESP_GAP_BLE_SCAN_RSP_DATA_RAW_SET_COMPLETE_EVT:
@@ -542,7 +542,7 @@ static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param
             if (adv_config_done == 0){
                 esp_ble_gap_start_advertising(&adv_params);
 
-                printf("adv 2\r\n");
+                // printf("adv 2\r\n");
             }
             break;
     #else
@@ -908,7 +908,7 @@ void Get_Mac_Init(void )
     // ESP_LOGW(GATTS_TABLE_TAG, "BLE_MAC IS %s : ",
     //                 temp);      
 
-    printf("My MAC:\n");
+    // printf("My MAC:\n");
     esp_log_buffer_hex(GATTS_TABLE_TAG, ble_mac, 6);          
 
     BT_Device_Name[sizeof(BT_Device_Name) - 11] = temp[0];

qianjiang/main/main_user.c

@@ -93,8 +93,8 @@ static void Sys_Run_Tasks(void *arg)
             {
                 testcnt = 0;
 
-                printf("BT_User.BT_Sts = %d\r\n", BT_User.BT_Sts);
-                printf("Ble_User.Ble_Sts = %d\r\n", Ble_User.Ble_Sts);
+                // printf("BT_User.BT_Sts = %d\r\n", BT_User.BT_Sts);
+                // printf("Ble_User.Ble_Sts = %d\r\n", Ble_User.Ble_Sts);
 
                 // esp_log_buffer_hex(TAG, peer_addr, 6);
 
@@ -133,7 +133,7 @@ void app_main(void)
     // bsp_Ble_Init();
     bsp_Uart_Init();
 
-    printf("KL30 INIT OVER~~~~~~\r\n");
+    // printf("KL30 INIT OVER~~~~~~\r\n");
 
     xTaskCreatePinnedToCore(Sys_Run_Tasks, "Sys_Run_Tasks", 4096, NULL, 3, NULL, 1);
 }

qianjiang/main/simple_ota_example.c

@@ -130,16 +130,16 @@ void simple_ota_example_task(void *pvParameter)
     if (ret == ESP_OK) {
         ESP_LOGI(TAG, "OTA Succeed");
 
-        printf("\n");
-        printf("==========================================================\n");
+        // printf("\n");
+        // printf("==========================================================\n");
         for(i = 5; i > 0; i--)
         {
             printf("============ System will restart in %d second. ============\n", i);
             vTaskDelay(1000 / portTICK_PERIOD_MS);
         }
-        printf("============         System rebooting...      ============\n");
-        printf("==========================================================\n");
-        printf("\n");
+        // printf("============         System rebooting...      ============\n");
+        // printf("==========================================================\n");
+        // printf("\n");
 
         esp_restart();
     } else {

qianjiang/sdkconfig

@@ -212,12 +212,12 @@ CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
+CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
+# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=2
+CONFIG_BOOTLOADER_LOG_LEVEL=1
 
 #
 # Serial Flash Configurations
@@ -1122,15 +1122,15 @@ CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5=y
 # Brownout Detector
 #
 CONFIG_ESP_BROWNOUT_DET=y
-CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y
+# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
+CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4=y
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_ESP_BROWNOUT_DET_LVL=0
+CONFIG_ESP_BROWNOUT_DET_LVL=4
 # end of Brownout Detector
 
 # CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
@@ -1335,16 +1335,18 @@ CONFIG_HEAP_TRACING_OFF=y
 # Log output
 #
 # CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
+CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
 # CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_LOG_DEFAULT_LEVEL_INFO=y
+# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
 # CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
 # CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=3
+CONFIG_LOG_DEFAULT_LEVEL=1
 CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
+# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
+# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=3
+CONFIG_LOG_MAXIMUM_LEVEL=1
 CONFIG_LOG_COLORS=y
 CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
@@ -1898,12 +1900,12 @@ CONFIG_WPA_MBEDTLS_TLS_CLIENT=y
 # CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
 # CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_WARN=y
+CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=y
+# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=2
+CONFIG_LOG_BOOTLOADER_LEVEL=1
 # CONFIG_APP_ROLLBACK_ENABLE is not set
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
 # CONFIG_FLASHMODE_QIO is not set
@@ -2204,24 +2206,24 @@ CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 CONFIG_ESP32_DEBUG_OCDAWARE=y
 CONFIG_BROWNOUT_DET=y
 CONFIG_ESP32_BROWNOUT_DET=y
-CONFIG_BROWNOUT_DET_LVL_SEL_0=y
-CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
+# CONFIG_BROWNOUT_DET_LVL_SEL_0 is not set
+# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
+CONFIG_BROWNOUT_DET_LVL_SEL_4=y
+CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4=y
 # CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
 # CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
 # CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_BROWNOUT_DET_LVL=0
-CONFIG_ESP32_BROWNOUT_DET_LVL=0
+CONFIG_BROWNOUT_DET_LVL=4
+CONFIG_ESP32_BROWNOUT_DET_LVL=4
 # CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
 CONFIG_IPC_TASK_STACK_SIZE=1024
 CONFIG_TIMER_TASK_STACK_SIZE=3584