🐞 fix:自检显示对段修改进入休眠时间改为5秒

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.c

@@ -564,7 +564,7 @@ _Fun_Res SEG_SET_EleDial_1SOC(uint8_t m_Flag, uint8_t m_SEG)
     _Fun_Res m_Res;
     uint8_t Num;
     uint8_t m8;
-    if ((m_Flag == 1u) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18200A20_Msg)) == CAN_SIG_NORMAL))
+    if (((m_Flag == 1u) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18200A20_Msg)) == CAN_SIG_NORMAL)) || (checkself_seg_Flag == 1))
     {
         IC1_SEG136 = IC_SEG_GREY;
         IC1_SEG137 = IC_SEG_GREY;
@@ -656,7 +656,7 @@ _Fun_Res SEG_SET_EleDial_2SOC(uint8_t m_Flag, uint8_t m_SEG)
     _Fun_Res m_Res;
     uint8_t Num;
     uint8_t m8;
-    if ((m_Flag == 1u) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18200A21_Msg)) == CAN_SIG_NORMAL))
+    if (((m_Flag == 1u) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18200A21_Msg)) == CAN_SIG_NORMAL)) || (checkself_seg_Flag == 1))
     {
         IC1_SEG124 = IC_SEG_ON;
         IC1_SEG123 = IC_SEG_ON;
@@ -2606,21 +2606,26 @@ void Checkself_SEG_Display(void)
     uint16_t Trip = 0;
     uint16_t hour = 0;
     uint16_t min = 0;
-
-    soc_all = (Checkself_SEG_step / 5) * 11 + 100;
-    uint32_t allhour = (Checkself_SEG_step / 5) * 11111;
+    uint8_t Checkself_num = ((Checkself_SEG_step*10) / 48);
+    if(Checkself_num >= 10)
+    {
+        Checkself_num = 9;
+    }
+    uint32_t allhour = Checkself_num * 11111;
     // Fuel = Checkself_SEG_step / 5u;
     // SEG_SET_FuelDial(1, Fuel);
-
+    uint32_t EleDial_2SOC = ((Checkself_SEG_step*10) / 48);
+    
+    SEG_SET_EleDial_2SOC(1, EleDial_2SOC);
+    SEG_SET_EleDial_1SOC(1, EleDial_2SOC);
+    soc_all = Checkself_num * 11 + 100;
     SEG_SET_EleDial_AllSOC(1, soc_all);
-    SEG_SET_EleDial_2SOC(1, ((Checkself_SEG_step*10) / 45));
-    SEG_SET_EleDial_1SOC(1, ((Checkself_SEG_step*10) / 45));
     SEG_SET_Clock_ALL(1, allhour);
-    hour = (Checkself_SEG_step / 5) * 11;
-    min = (Checkself_SEG_step / 5) * 11;
+    hour = Checkself_num * 11;
+    min = Checkself_num * 11;
     SEG_SET_Clock(hour, min, 1, 1, 1);
-    SEG_SET_GEAR(1, (Checkself_SEG_step / 5), 1);
-    SEG_SET_Cutterhead(1, (Checkself_SEG_step / 5), 1);
+    SEG_SET_GEAR(1, Checkself_num, 1);
+    SEG_SET_Cutterhead(1, Checkself_num, 1);
     if (Checkself_SEG_step_count < 100)
     {
         Checkself_SEG_step_count++;

Firmware/Source/Component/PowerManagement/PowerManag_user.c

@@ -165,7 +165,7 @@ static Power_Status_em Power_Stay_OFF(void)
     }
     else
     {
-        if ((Common_GetIgnOffTime() < 2500))
+        if ((Common_GetIgnOffTime() < 5000))
         {
             u8PowerSts = EM_IGN_OFF;
         }