✨ feat(修改断码):

Firmware/Project/Cmsemicon/BAT32A239/MDK_ARM/HaoJin.uvprojx

@@ -16,7 +16,7 @@
         <TargetCommonOption>
           <Device>BAT32A239KK64FB</Device>
           <Vendor>Cmsemicon</Vendor>
-          <PackID>Cmsemicon.BAT32A239.1.0.3</PackID>
+          <PackID>Cmsemicon.BAT32A239.1.0.5</PackID>
           <PackURL>http://www.mcu.com.cn/pack/</PackURL>
           <Cpu>IRAM(0x20000000,0x08000) IROM(0x00000000,0x40000) CPUTYPE("Cortex-M0+") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
@@ -1116,7 +1116,7 @@
       <file attr="config" category="source" name="Device\Source\isr_BAT32A239.c" version="1.0.0">
         <instance index="0">RTE\Device\BAT32A239KK64FB\isr_BAT32A239.c</instance>
         <component Cclass="Device" Cgroup="ISR" Cvendor="Cmsemicon" Cversion="1.0.0" condition="BAT32A239 CMSIS-CORE"/>
-        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.3"/>
+        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.5"/>
         <targetInfos>
           <targetInfo name="HaoJin232"/>
         </targetInfos>
@@ -1124,7 +1124,7 @@
       <file attr="config" category="source" condition="Startup ARM" name="Device\Source\ARM\startup_BAT32A239.s" version="1.0.0">
         <instance index="0">RTE\Device\BAT32A239KK64FB\startup_BAT32A239.s</instance>
         <component Cclass="Device" Cgroup="Startup" Cvendor="Cmsemicon" Cversion="1.0.0" condition="BAT32A239 CMSIS-CORE"/>
-        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.3"/>
+        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.5"/>
         <targetInfos>
           <targetInfo name="HaoJin232"/>
         </targetInfos>
@@ -1132,7 +1132,7 @@
       <file attr="config" category="source" name="Device\Source\system_BAT32A239.c" version="1.0.0">
         <instance index="0">RTE\Device\BAT32A239KK64FB\system_BAT32A239.c</instance>
         <component Cclass="Device" Cgroup="Startup" Cvendor="Cmsemicon" Cversion="1.0.0" condition="BAT32A239 CMSIS-CORE"/>
-        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.3"/>
+        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.5"/>
         <targetInfos>
           <targetInfo name="HaoJin232"/>
         </targetInfos>
@@ -1140,7 +1140,7 @@
       <file attr="config" category="header" name="Device\Source\userdefine.h" version="1.0.0">
         <instance index="0">RTE\Device\BAT32A239KK64FB\userdefine.h</instance>
         <component Cclass="Device" Cgroup="Startup" Cvendor="Cmsemicon" Cversion="1.0.0" condition="BAT32A239 CMSIS-CORE"/>
-        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.3"/>
+        <package name="BAT32A239" schemaVersion="1.4" url="http://www.mcu.com.cn/pack/" vendor="Cmsemicon" version="1.0.5"/>
         <targetInfos>
           <targetInfo name="HaoJin232"/>
         </targetInfos>

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.h

@@ -7,10 +7,27 @@
 
 typedef enum
 {
-    SEG_LED_Voltage = 0u,        
-    SEG_LED_Auto_Start_Stop,
-    SEG_LED_Fuel,
-    
+    SEG_LED_Recharge = 0u,        
+    //SEG_LED_Auto_Start_Stop,
+    //SEG_LED_Fuel,
+    SEG_LED_Engine_Failure, //发动机故障
+    SEG_LED_Battery_Failure,//电池故障
+    SEG_LED_Oil_press_Warning,  //机油压力报警
+    SEG_LED_System_Light,//系统知识灯
+    SEG_LED_Power_Battery_Failure, //动力电池故障
+    SEG_LED_Chloramine, //草满
+    SEG_LED_Cutter_Overload,  //刀盘过载
+    SEG_LED_Seat_Detection, //座椅检测
+    SEG_LED_Key_Access,//钥匙接入
+    SEG_LED_Ready,  //Ready
+    SEG_LED_Cutter_Head_switch,//刀盘开关
+    SEG_LED_engine_Burn,  //发动机工作
+    SEG_LED_External_Discharge, //对外放电
+    SEG_LED_bluetooth, //蓝牙
+    SEG_LED_Distance_Light,//远光灯
+    SEG_LED_Cruise_Control,//定速巡航
+    SEG_LED_HHT_Charger,  //充电枪
+    SEG_LED_Fuel_Oil,  //燃油灯
 
     SEG_LED_MAX
 } SEG_LED_Idx_t;
@@ -30,13 +47,13 @@ _Fun_Res SEG_SET_Frame(uint8_t m_Flag);
 _Fun_Res SEG_SET_GEAR(uint8_t m_Gear_Flag,uint8_t m_Gear);
 
 /**@brief 电量表盘显示函数*/
-_Fun_Res SEG_SET_EleDial(uint8_t m_Flag,uint8_t m_SEG,uint8_t m_NUM);
+_Fun_Res SEG_SET_EleDial(uint8_t m_Flag,uint8_t m_SEG,uint16_t m_NUM);
 
 /**@brief 燃油表盘显示函数*/
 _Fun_Res SEG_SET_FuelDial(uint8_t m_Flag,uint8_t m_SEG);
 
 /**@brief 转速表盘显示函数*/
-_Fun_Res SEG_SET_EspeedDial(uint8_t m_Flag, uint8_t m_SEG, uint16_t m_NUM);
+//_Fun_Res SEG_SET_EspeedDial(uint8_t m_Flag, uint8_t m_SEG, uint16_t m_NUM);
 
 /**@brief 功率表盘显示函数*/
 _Fun_Res SEG_SET_PowerDial(uint8_t m_Flag,uint8_t m_SEG,uint8_t m_Sign,uint8_t m_NUM);
@@ -44,6 +61,8 @@ _Fun_Res SEG_SET_PowerDial(uint8_t m_Flag,uint8_t m_SEG,uint8_t m_Sign,uint8_t m
 /**@brief 续航里程显示函数*/
 _Fun_Res SEG_SET_DTE_NUM(uint8_t m_Flag, uint16_t m_NUM);
 
+/**@brief 车速8字段显示函数*/
+_Fun_Res SEG_SET_VSpeed_NUM(uint8_t m_Flag , uint16_t m_NUM);
 
 /**@brief L8字段显示函数*/
 _Fun_Res SEG_SET_L8_NUM(uint8_t m_Flag , uint8_t m_NUM);
@@ -57,10 +76,10 @@ _Fun_Res SEG_SET_TRIP_NUM(uint8_t m_Flag,uint16_t m_NUM);
 /**@brief 时间显示函数*/
 _Fun_Res SEG_SET_Clock(uint8_t m_hour, uint8_t m_minute, uint8_t m_icon, uint8_t m_Flag1, uint8_t m_Flag2 );
 
-void Check_SEG_Display(void);
+uint8_t Check_SEG_Display(void);
 
 extern uint8_t check_SEG_step;
-extern uint8_t Espeed_check_SEG_step;
+
 
 
 #define IC_SEG_OFF   0x00u
@@ -69,17 +88,24 @@ extern uint8_t Espeed_check_SEG_step;
 
 /**@brief 指示灯显示函数*/
 _Fun_Res SEG_SET_LED_STS(uint8_t LED_NUM , uint8_t m_Flag);
-
+/**@brief 行驶时间显示函数*/
+_Fun_Res SEG_SET_Travel_Time_NUM(uint8_t m_Flag, uint32_t m_NUM);
 //扫盘用
 _Fun_Res SEG_Scan_SET_EleDial(uint8_t m_SEG);
 _Fun_Res SEG_Scan_SET_PowerDial(uint8_t m_SEG);
+/**@brief 刀盘显示函数*/
+_Fun_Res SEG_SET_Cutterhead(uint16_t LED_NUM, uint8_t m_Flag);
 
 void SEG_Scan_SET_FuelDial(void);
 void SEG_Scan_SET_EspeedDial(void);
 
+//void SEG_Scan_SET_FuelDial_Checkself(void);
+//void SEG_Scan_SET_EspeedDial_Checkself(void);
+//void SEG_Scan_SET_VSpeed_Checkself(void);
+
 extern void Checkself_Init (void);
 extern void Checkself_SEG_Display(void);
-void TYW_Check_Count(void);
+
 
 
 

Firmware/Source/System/Sys_Task_List.c

@@ -62,8 +62,9 @@ void Sys_50ms_Tasks(void)
     BU98R10_Update_Request();
     LED_Driver_Scan_Refresh();
     Telltales_Management();
-    Gauge_Service();
+    //Gauge_Service();
     // Key_Check_Service();
+    SEG_SET_EleDial(1,10,10);
 }
 
 uint8_t u8LEDDriverCheckCount = 0U;