✨ feat(增加胎压断码):

Firmware/Source/Application/GUI_Display/GUI_Display.c

@@ -202,13 +202,9 @@ void Gauge_Service(void)
                     // Gauge_Power_2_SOC_Display();
                     Checkself_Init();
                     Gauge_Clock_Display();
-                    SEG_SET_Clock(22, 22, 1, 1, 1);
-                    SEG_SET_Fault_Code(0, 2222);
-                    // SEG_SET_EleDial_1SOC(1, 10, 22);
-                    // SEG_SET_FuelDial(0, 8);
                     Gauge_EleDial_AllSOC_Display();
-                    SEG_SET_GEAR(1, 1);
-                    SEG_SET_Cutterhead(1, 2);
+                    SEG_SET_Cutterhead(2, 1);
+                    SEG_SET_GEAR(1,0);
                     SEG_SET_Frame(1);
                     interact_PWM_Low_Duty = 0;
                 }

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.c

@@ -139,6 +139,7 @@ _Fun_Res SEG_SET_Cutterhead(uint16_t LED_NUM, uint8_t m_Flag)
         IC1_SEG074 = IC_SEG_ON;
         IC1_SEG079 = IC_SEG_ON;
         IC1_SEG117 = IC_SEG_ON;
+        IC1_SEG116 = IC_SEG_ON;
         IC1_SEG083 = IC_SEG_ON;
         if (LED_NUM == 1)
         {
@@ -722,6 +723,340 @@ _Fun_Res SEG_SET_EleDial_AllSOC(uint8_t m_Flag,uint16_t m_NUM)
 
     return m_Res;
 }
+
+/**@brief 左胎压显示函数
+ * @param[in]  m_Flag            段与数字是否显示     -1 显示 -0 不显示
+ * @param[in]  m_NUM             车速表盘段数0<=m_SEG<=10
+ * @return  函数执行结果
+ * - EX_OK      		上报成功
+ * - EX_ERR        	上报失败
+ */
+_Fun_Res SEG_SET_Left_Tirepressure(uint8_t m_Flag,uint16_t m_NUM)
+{
+    _Fun_Res m_Res;
+    uint8_t Num;
+    uint8_t m8;
+    if (m_Flag == 1u)
+    {
+        IC2_SEG123 = IC_SEG_ON;
+        IC2_SEG109 = IC_SEG_ON;
+        IC2_SEG107 = IC_SEG_ON;
+
+        Num = (m_NUM / 10u) % 10u;
+        if(m_NUM > 10)
+        {
+            m8 = SEG_DISPLAY_NUMBER0[Num];
+        }
+        else
+        {
+            m8 = SEG_UNDISPLAY_NUMBER0[Num];
+        }
+        if (Bit_Is_Set(m8, 0))
+        {
+            IC2_SEG119 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG119 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 1))
+        {
+            IC2_SEG118 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG118 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 2))
+        {
+            IC2_SEG116 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG116 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 3))
+        {
+            IC2_SEG106 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG106 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 5))
+        {
+            IC2_SEG121 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG121 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 4))
+        {
+            IC2_SEG122 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG122 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 6))
+        {
+            IC2_SEG117 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG117 = IC_SEG_OFF;
+        }
+        /*个位*/
+        Num = m_NUM % 10u;
+        m8 = SEG_DISPLAY_NUMBER0[Num];
+        if (Bit_Is_Set(m8, 0))
+        {
+            IC2_SEG113 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG113 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 1))
+        {
+            IC2_SEG112 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG112 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 2))
+        {
+            IC2_SEG110 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG110 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 3))
+        {
+            IC2_SEG108 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG108 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 5))
+        {
+            IC2_SEG114 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG114 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 4))
+        {
+            IC2_SEG115 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG115 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 6))
+        {
+            IC2_SEG111 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG111 = IC_SEG_OFF;
+        }
+    }
+    else
+    {
+        IC2_SEG113 = IC_SEG_OFF;
+        IC2_SEG112 = IC_SEG_OFF;
+        IC2_SEG110 = IC_SEG_OFF;
+        IC2_SEG108 = IC_SEG_OFF;
+        IC2_SEG115 = IC_SEG_OFF;
+        IC2_SEG114 = IC_SEG_OFF;
+        IC2_SEG111 = IC_SEG_OFF;
+        IC2_SEG118 = IC_SEG_OFF;
+        IC2_SEG116 = IC_SEG_OFF;
+        IC2_SEG106 = IC_SEG_OFF;
+        IC2_SEG122 = IC_SEG_OFF;
+        IC2_SEG121 = IC_SEG_OFF;
+        IC2_SEG117 = IC_SEG_OFF;
+        IC2_SEG123 = IC_SEG_OFF;
+        IC2_SEG107 = IC_SEG_OFF;
+        IC2_SEG109 = IC_SEG_OFF;
+    }
+
+    return m_Res;
+}
+
+
+/**@brief 右胎压显示函数
+ * @param[in]  m_Flag            段与数字是否显示     -1 显示 -0 不显示
+ * @param[in]  m_NUM             车速表盘段数0<=m_SEG<=10
+ * @return  函数执行结果
+ * - EX_OK      		上报成功
+ * - EX_ERR        	上报失败
+ */
+_Fun_Res SEG_SET_Right_Tirepressure(uint8_t m_Flag,uint16_t m_NUM)
+{
+    _Fun_Res m_Res;
+    uint8_t Num;
+    uint8_t m8;
+    if (m_Flag == 1u)
+    {
+        IC2_SEG120 = IC_SEG_ON;
+        IC2_SEG131 = IC_SEG_ON;
+        IC2_SEG139 = IC_SEG_ON;
+
+        Num = (m_NUM / 10u) % 10u;
+        if(m_NUM > 10)
+        {
+            m8 = SEG_DISPLAY_NUMBER0[Num];
+        }
+        else
+        {
+            m8 = SEG_UNDISPLAY_NUMBER0[Num];
+        }
+        if (Bit_Is_Set(m8, 0))
+        {
+            IC2_SEG124 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG124 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 1))
+        {
+            IC2_SEG130 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG130 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 2))
+        {
+            IC2_SEG128 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG128 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 3))
+        {
+            IC2_SEG127 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG127 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 5))
+        {
+            IC2_SEG125 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG125 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 4))
+        {
+            IC2_SEG126 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG126 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 6))
+        {
+            IC2_SEG129 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG129 = IC_SEG_OFF;
+        }
+        /*个位*/
+        Num = m_NUM % 10u;
+        m8 = SEG_DISPLAY_NUMBER0[Num];
+        if (Bit_Is_Set(m8, 0))
+        {
+            IC2_SEG132 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG132 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 1))
+        {
+            IC2_SEG138 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG138 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 2))
+        {
+            IC2_SEG136 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG136 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 3))
+        {
+            IC2_SEG135 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG135 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 5))
+        {
+            IC2_SEG133 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG133 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 4))
+        {
+            IC2_SEG134 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG134 = IC_SEG_OFF;
+        }
+        if (Bit_Is_Set(m8, 6))
+        {
+            IC2_SEG137 = IC_SEG_ON;
+        }
+        else
+        {
+            IC2_SEG137 = IC_SEG_OFF;
+        }
+    }
+    else
+    {
+        IC1_SEG124 = IC_SEG_OFF;
+        IC1_SEG130 = IC_SEG_OFF;
+        IC1_SEG128 = IC_SEG_OFF;
+        IC1_SEG127 = IC_SEG_OFF;
+        IC1_SEG126 = IC_SEG_OFF;
+        IC1_SEG129 = IC_SEG_OFF;
+        IC1_SEG125 = IC_SEG_OFF;
+        IC1_SEG132 = IC_SEG_OFF;
+        IC1_SEG138 = IC_SEG_OFF;
+        IC1_SEG136 = IC_SEG_OFF;
+        IC1_SEG135 = IC_SEG_OFF;
+        IC1_SEG134 = IC_SEG_OFF;
+        IC1_SEG133 = IC_SEG_OFF;
+        IC1_SEG137 = IC_SEG_OFF;
+        IC1_SEG139 = IC_SEG_OFF;
+        IC1_SEG131 = IC_SEG_OFF;
+        IC1_SEG120 = IC_SEG_OFF;
+    }
+
+    return m_Res;
+}
 /**@brief 故障码显示
  * @param[in]  m_Flag            车速是否显示     -1 显示 -0 不显示
  * @param[in]  m_NUM             车速数据      0<=m_NUM<=299
@@ -2422,6 +2757,7 @@ void Checkself_Init(void)
     Checkself_SEG_step_count = 0;
 }
 uint8_t soc_all = 0;
+
 void Checkself_SEG_Display(void)
 {
     // uint16_t Fuel = 0;
@@ -2435,12 +2771,15 @@ void Checkself_SEG_Display(void)
     // SEG_SET_FuelDial(1, Fuel);
 
     SEG_SET_EleDial_AllSOC(1,soc_all);
+    SEG_SET_Left_Tirepressure(1,soc_all);
+    SEG_SET_Right_Tirepressure(1,soc_all);
     SEG_SET_EleDial_2SOC(1,(Checkself_SEG_step / 3) + 1);
     SEG_SET_EleDial_1SOC(1,(Checkself_SEG_step / 3) + 1);
     SEG_SET_Clock_ALL(1,allhour);
     hour = (Checkself_SEG_step / 3) * 11;
     min = (Checkself_SEG_step / 3) * 11;
     SEG_SET_Clock(hour, min, 1, 1, 1);
+    SEG_SET_Fault_Code(1,hour*100+hour);
     LED_Driver_Channel_Set(LampChannel_0, LampCh0_00_Grass_Full_R, LED_ON);
     // LED_Driver_Channel_Set(LampChannel_0, LampCh0_01_Power_Battery_Failure_R, LED_ON);
     // LED_Driver_Channel_Set(LampChannel_0, LampCh0_02_System_Indicator_R, LED_ON);
@@ -2460,17 +2799,27 @@ void Checkself_SEG_Display(void)
     LED_Driver_Channel_Set(LampChannel_0, LampCh0_21_LED_Open_W, LED_ON);
     LED_Driver_Channel_Set(LampChannel_0, LampCh0_31_Working_Hours_One_W, LED_ON);
     LED_Driver_Channel_Set(LampChannel_0, LampCh0_32_Charging_Connection_R, LED_ON);
+    LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Lead_Acid_Battery_Failure_R, LED_ON);
+
     SEG_SET_LED_STS(SEG_LED_Recharge, 1);
-    // SEG_SET_LED_STS(SEG_LED_System_Light, 1);
+    SEG_SET_LED_STS(SEG_LED_Engine_Failure, 1);
+    SEG_SET_LED_STS(SEG_LED_Battery_Failure, 1);
+    SEG_SET_LED_STS(SEG_LED_Oil_press_Warning, 1);
+    SEG_SET_LED_STS(SEG_LED_System_Light, 1);
+    SEG_SET_LED_STS(SEG_LED_Power_Battery_Failure, 1);
     SEG_SET_LED_STS(SEG_LED_Chloramine, 1);
     SEG_SET_LED_STS(SEG_LED_Cutter_Overload, 1);
     SEG_SET_LED_STS(SEG_LED_Seat_Detection, 1);
     SEG_SET_LED_STS(SEG_LED_Key_Access, 1);
     SEG_SET_LED_STS(SEG_LED_Ready, 1);
     SEG_SET_LED_STS(SEG_LED_Cutter_Head_switch, 1);
+    SEG_SET_LED_STS(SEG_LED_engine_Burn, 1);
     SEG_SET_LED_STS(SEG_LED_External_Discharge, 1);
+    SEG_SET_LED_STS(SEG_LED_bluetooth, 1);
     SEG_SET_LED_STS(SEG_LED_Distance_Light, 1);
+    SEG_SET_LED_STS(SEG_LED_Cruise_Control, 1);
     SEG_SET_LED_STS(SEG_LED_HHT_Charger, 1);
+    SEG_SET_LED_STS(SEG_LED_Fuel_Oil, 1);
 
     if (Checkself_SEG_step_count < 60)
     {

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.h

@@ -55,6 +55,12 @@ _Fun_Res SEG_SET_EleDial_2SOC(uint8_t m_Flag,uint8_t m_SEG);
 /**@brief 电量表盘AllSOC显示函数*/
 _Fun_Res SEG_SET_EleDial_AllSOC(uint8_t m_Flag,uint16_t m_NUM);
 
+/**@brief 左胎压显示函数*/
+_Fun_Res SEG_SET_Left_Tirepressure(uint8_t m_Flag,uint16_t m_NUM);
+
+/**@brief 右胎压显示函数*/
+_Fun_Res SEG_SET_Right_Tirepressure(uint8_t m_Flag,uint16_t m_NUM);
+
 // /**@brief 燃油表盘显示函数*/
 // _Fun_Res SEG_SET_FuelDial(uint8_t m_Flag,uint8_t m_SEG);