🎉 init:更换adc采集和adc驱动

Firmware/Source/Component/Analog/Analog_Signals.c

@@ -4,7 +4,7 @@
   * \attention
   *
   * This file is automatically generated by analog signals configuration tool.
-  * Date         : 2024/3/31 13:14:40
+  * Date         : 2024/6/16 16:49:27
   * Cfg Tool Ver : 1.1.0
   * Engineer     : ShiHao
   * (c) Heilongjiang TYW electronics co., LTD
@@ -15,7 +15,7 @@
 #include "Analog_Signals.h"
 
 /* Private typedef ----------------------------------------------------------*/
-typedef struct
+typedef struct __attribute__((aligned(4)))
 {
     uint8_t   u8Ch;
     uint8_t   u8RefType;
@@ -26,7 +26,7 @@ typedef struct
     ADC_Circuit_Calc_Func  pfProcFunc;
 }ADC_Ch_Cfg_st_t;
 
-typedef enum ASigConvStat
+typedef __attribute__((aligned(4))) enum ASigConvStat
 {
     ADC_STAT_IDLE = 0,
     ADC_STAT_INIT,
@@ -36,7 +36,7 @@ typedef enum ASigConvStat
     ADC_STAT_ERR,
 }ADC_Stat_en_t;
 
-typedef struct
+typedef struct __attribute__((aligned(4)))
 {
     ADC_Stat_en_t  enStatus;
     uint8_t        u8CurrentCh;
@@ -44,7 +44,7 @@ typedef struct
     uint8_t        u8Timer;
 }ADC_Ctrl_st_t;
 
-typedef struct
+typedef struct __attribute__((aligned(4)))
 {
     uint8_t  u8Valid;
     uint8_t  u8Rsvd;
@@ -72,25 +72,21 @@ ADC_Ctrl_st_t     stADCCtrl;
 uint16_t          u16ADCSample[ADC_CONV_CH_NUMBER];
 ADC_Data_st_t     stADCData[ADC_SIGNAL_CH_NUMBER];
 
-const uint8_t u8ADCChList[ADC_CONV_CH_NUMBER] =
+const uint8_t __attribute__((aligned(4))) u8ADCChList[ADC_CONV_CH_NUMBER] =
 {
-     2U,  3U,  7U,  5U, 
+     2U,  3U, 
 };
 
-const ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
+const __attribute__((aligned(4))) ADC_Ch_Cfg_st_t stADCChCfg[ADC_SIGNAL_CH_NUMBER] =
 {
-    {  0U,   0U,   0U,     0U,   700U,     1U,  ADC_Voltage_Calc_Circuit102,},
+    {  0U,   0U,   0U,     0U,     0U,     1U,  ADC_Voltage_Calc_Circuit102,},
     {  1U,   0U,   0U,     0U,     0U,     1U,  ADC_Voltage_Calc_Circuit102,},
-    {  2U,   0U,   0U,     0U,     0U,     1U,  ADC_Voltage_Calc_Circuit101,},
-    {  3U,   2U,   0U,     2U,    18U,     1U,      ADC_Res_Calc_Circuit101,},
 };
 
-const ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
+const __attribute__((aligned(4))) ADC_Res_List_st_t stADCResList[ADC_SIGNAL_CH_NUMBER] =
 {
     {    3300000U,   1000000U,         0U,         0U,},
     {    3300000U,   1000000U,         0U,         0U,},
-    {          0U,         0U,         0U,         0U,},
-    {          0U,         0U,       670U,       300U,},
 };
 
 /* Private function prototypes ----------------------------------------------*/
@@ -115,10 +111,11 @@ void Analog_Signal_Conv_Init(void)
         }
     }
 
-    RTE_ADC_Init(0,2);
-    RTE_ADC_Init(0,3);
-    RTE_ADC_Init(0,5);
-    RTE_ADC_Init(0,7);
+
+    for (i = 0U; i < ADC_CONV_CH_NUMBER; i++)
+    {
+        RTE_ADC_Init(0, u8ADCChList[i]);
+    }
 
     for (i = 0U; i < ADC_SIGNAL_CH_NUMBER; i++)
     {

Firmware/Source/Component/Analog/Analog_Signals.h

@@ -4,7 +4,7 @@
   * \attention
   *
   * This file is automatically generated by analog signals configuration tool.
-  * Date         : 2024/3/31 13:14:40
+  * Date         : 2024/6/16 16:49:27
   * Cfg Tool Ver : 1.1.0
   * Engineer     : ShiHao
   * (c) Heilongjiang TYW electronics co., LTD
@@ -33,8 +33,8 @@ enum ADCChName
 };
 
 /* Exported macro ------------------------------------------------------------*/
-#define   ADC_TOTAL_CH_NUMBER               (4U)
-#define   ADC_SIGNAL_CH_NUMBER              (4U)
+#define   ADC_TOTAL_CH_NUMBER               (2U)
+#define   ADC_SIGNAL_CH_NUMBER              (2U)
 #define   ADC_REF_VOLTAGE                   u16ADCRefVoltage
 
 /* Exported variables --------------------------------------------------------*/

Firmware/Source/Device/Cmsemicon/BAT32A239/RTE/AD/RTE_ADC_INTERIM_VERSION.c

@@ -4,8 +4,9 @@
 #include "cgc.h"
 #include "gpio.h"
 #include "isr.h"
+#include "Analog\Analog_Signals.h"
 
-uint8_t       u8NewChNum[4] = {2, 3, 7, 5};
+// uint8_t u8NewChNum[4] = {2, 3, 7, 5};
 
 void RTC_ADC_Interrupt(void *msg)
 {
@@ -17,6 +18,7 @@ void RTE_ADC_Init(const uint8_t u8ChList[], uint8_t u8ChNum)
 {
 	GPIO_InitTypeDef      GPIO_InitStructure = {0};
 	ADC_InitTypeDef       ADC_InitStructure = {0};
+
 	
 	if(u8ChNum<=7)
 	{
@@ -133,13 +135,13 @@ void RTE_ADC_Get_Conversion_Result(uint16_t *pu16Data, uint8_t u8ChNum)
 
 	uint8_t i;
 
-	if ((pu16Data != 0U) && (u8ChNum > 0U) && (u8ChNum <= 4U))
+	if ((pu16Data != 0U) && (u8ChNum > 0U) && (u8ChNum <= ADC_TOTAL_CH_NUMBER))
 	{
 		if (RTE_ADC_Get_Conversion_Status() == 0U)
 		{
 			for (i = 0U; i < u8ChNum; i++)
 			{
-				ADC_Converse(u8NewChNum[i], 1, pu16Data);
+				ADC_Converse((ADC_Channel_t)u8ADCChList[i], 1, pu16Data);
 				pu16Data++;
 			}
 		}

Firmware/Source/Device/Cmsemicon/BAT32A239/RTE/AD/RTE_ADC_INTERIM_VERSION.h

@@ -4,6 +4,8 @@
 
 #include <stdint.h>
 
+extern const uint8_t u8ADCChList[];
+
 #define ADC_RESOLUTION (4096U) /* 12bit ADC */
 
 extern void RTE_ADC_Init(const uint8_t u8ChList[], uint8_t u8ChNum);