✨ feat:混动车型增加机油压力指示灯相关逻辑

Firmware/Source/Application/CAN_APP/CAN_CH0_CAN_Communication_Matrix.c

@@ -163,7 +163,7 @@ const st_CANMsgAttribute CAN_CH0_CAN_MSG_CONST_ARRAY[CAN_CH0_ID_TOTAL_MAX] =
             1000ul,
             0x234ul,
             ((void *)0),
-            ((void *)0),
+            (CAN_0x234_Receive),
             ((void *)0),
         },
 };

Firmware/Source/Component/Telltales/Telltales_user.c

@@ -65,6 +65,8 @@ static void LED_Power_Battery_Failure_R_Execution(Tellib_uint16_t led_status);
 uint8_t u8CanId401Flag = 0;
 uint8_t g_u8EmsFltLv3Count = 0U;
 uint8_t g_EngineMalfunctionStatus = 0U;
+uint8_t g_EngineOilLowCount = 0U;
+uint8_t g_EngineOilLowStatus = 0U;
 const LED_Attribute_st LED_Attribute[LED_Max] = 
 {
     /*  指示灯索引                           是否自检             外部信号自检                 工作电源状态         自检开始时间   自检持续时间   指示灯点亮条件                                   指示灯执行函数                           */
@@ -110,6 +112,8 @@ void Telltales_Init(void)
     u8CanId401Flag = 0;
     g_u8EmsFltLv3Count = 0U;
     g_EngineMalfunctionStatus = 0U;
+    g_EngineOilLowCount = 0U;
+    g_EngineOilLowStatus = 0U;
     Telltales_KL30_Wakeup_Init(Tel_Mem, LED_Attribute, &m_ExtPara);
 }
 
@@ -139,6 +143,24 @@ void CAN_0x225_Receive(uint8_t CopyData [])
     #endif
 }
 
+void CAN_0x234_Receive(uint8_t CopyData [])
+{
+    #if (PART_NUMBER == G54_A01)
+        if ((Get_CAN_CH0_ID_234_Sig_EMS_EngineOilLow() == 1U) && (g_EngineOilLowStatus == 0U))
+        {
+            g_EngineOilLowCount++;
+        }
+        else if ((Get_CAN_CH0_ID_234_Sig_EMS_EngineOilLow() == 0U) && (g_EngineOilLowStatus == 1U))
+        {
+            g_EngineOilLowCount++;
+        }
+        else 
+        {
+            g_EngineOilLowCount = 0U;
+        }
+    #endif
+}
+
 static Tellib_uint16_t LED_EFI_failure_Judgement(void)
 {
     Tellib_uint16_t LED_STATE = 0u;
@@ -227,28 +249,35 @@ static void LED_Lead_Acid_Battery_Failure_Execution(Tellib_uint16_t led_status)
 static Tellib_uint16_t LED_Oil_Pressure_Judgement(void)
 {
     Tellib_uint16_t LED_STATE = 0u;
-    // if (Line_In_Get_Status(LINE_IN_HighBeam))
-    // {
-    //     LED_STATE = 1;
-    // }
-    // else
-    // {
-    //     LED_STATE = 0;
-    // }
+
+    #if (PART_NUMBER == G54_A01)
+        if ((g_EngineOilLowStatus == 0U) && (g_EngineOilLowCount >= 3U))
+        {
+            g_EngineOilLowStatus = 1U;
+        }
+        else if ((g_EngineOilLowStatus == 1U) && (g_EngineOilLowCount >= 3U))
+        {
+            g_EngineOilLowStatus = 0U;
+        }
+
+        LED_STATE = (Tellib_uint16_t) g_EngineOilLowStatus;
+    #endif
     return LED_STATE;
 }
 static void LED_Oil_Pressure_Execution(Tellib_uint16_t led_status)
 {
-    if (led_status == 1u)
-    {
-        // LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Key_ISTOP, LED_ON);
-        // SEG_SET_LED_STS(1,1);
-    }
-    else
-    {
-        // LED_Driver_Channel_Set(LampChannel_0, LampCh0_07_Key_ISTOP, LED_OFF);
-        // SEG_SET_LED_STS(1,0);
-    }
+    #if (PART_NUMBER == G54_A01)
+        if (led_status == 1u)
+        {
+            LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Oil_Pressure_R, LED_ON);
+            SEG_SET_LED_STS(SEG_LED_Oil_press_Warning, 1U);
+        }
+        else
+        {
+            LED_Driver_Channel_Set(LampChannel_0, LampCh0_06_Oil_Pressure_R, LED_OFF);
+            SEG_SET_LED_STS(SEG_LED_Oil_press_Warning, 0U);
+        }
+    #endif
 }
 static Tellib_uint16_t LED_Grass_Full_Judgement(void)
 {

Firmware/Source/Component/Telltales/Telltales_user.h

@@ -49,5 +49,6 @@ void Telltales_Init(void);
 // void Telltales_Auto_Start_Stop_Setting(void);
 Tellib_uint8_t Telltales_Voltage_Date(void);
 extern void CAN_0x225_Receive(uint8_t CopyData []);
+extern void CAN_0x234_Receive(uint8_t CopyData []);
 
 #endif