🐞 fix:自检历程加上段码更新请求函数并更改时钟段码显示函数的bug，去掉过压保护debug的调试变量

Firmware/Source/Application/SEG_DISPLAY/SEG_DISPLAY.c

@@ -1876,7 +1876,7 @@ _Fun_Res SEG_SET_Clock(uint8_t m_hour, uint8_t m_minute, uint8_t m_icon, uint8_t
     _Fun_Res m_Res;
     uint8_t Num;
     uint8_t m8;
-    if ((m_hour >= 99u) || (m_minute >= 99u) || (m_icon > 1u) || (m_Flag1 > 1u) || (m_Flag2 > 1u))
+    if ((m_hour > 99u) || (m_minute > 99u) || (m_icon > 1u) || (m_Flag1 > 1u) || (m_Flag2 > 1u))
     {
         m_Res = EX_ERR;
     }
@@ -2644,8 +2644,6 @@ void Checkself_SEG_Display(void)
         if (Checkself_SEG_step == 0)
         {
             Checkself_SEG_step = 0;
-            SEG_SET_EleDial_2SOC(1, 0);
-            SEG_SET_EleDial_1SOC(1, 0);
         }
         else
         {

Firmware/Source/Component/System_Monitor/System_Monitor_User.c

@@ -59,7 +59,6 @@ static const monitorlib_uint16_t  SysFun_Range [ 26u ] = {
     2u,
     0u,
 };
-monitorlib_uint16_t u16Voltage_KL15;
 monitorlib_uint16_t Sys_Read_KL30_Voltage_F(void)
 {
     monitorlib_uint16_t u16Voltage;
@@ -85,7 +84,6 @@ monitorlib_uint16_t Sys_Read_KL15_Voltage(void)
 {
     monitorlib_uint16_t u16Voltage;
     u16Voltage = (monitorlib_uint16_t)ADC_Read_Signal(ADC_CH_KL15_VOLTAGE);
-    u16Voltage_KL15 = (monitorlib_uint16_t)ADC_Read_Signal(ADC_CH_KL15_VOLTAGE);
     return u16Voltage;
 }
 

Firmware/Source/System/Sys_Task_List.c

@@ -41,17 +41,22 @@ void Sys_20ms_Tasks(void)
 
 void Sys_50ms_Tasks(void)
 {
-    BU98R10_Update_Request();
+    
     LED_Driver_Scan_Refresh();
     Telltales_Management();
     Set_CAN_ALL_Signal();
     Gauge_Service();
+    if ((Common_GetIgnOnTime() > 1500))
+    {
+        BU98R10_Update_Request();
+    }
 }
 
 void Sys_15ms_Tasks(void)
 {
     if ((Common_GetIgnOnTime() <= 1500) && (Common_GetIgnOnTime() > 0) && (checkself_seg_Flag == 1))
     {
+        BU98R10_Update_Request();
         Checkself_SEG_Display();
     }
 }