✨ feat:增加清E方中数据功能

Firmware/Source/Application/Driving_Information/Data_Time.c

@@ -18,6 +18,7 @@ void Data_Time_KL30_Init(void)
     u16EngineTimeCount = 0U;
     g_u8ID339flag = 0U;
     g_u8SixHoursCompensationFlag = 1U;
+    g_u8TYWClearEepromFlag = 0U;
 }
 
 void Data_Time_KL15_Init(void)
@@ -28,6 +29,7 @@ void Data_Time_KL15_Init(void)
     u16EngineTimeCount = 0U;
     g_u8ID339flag = 0U;
     g_u8SixHoursCompensationFlag = 1U;
+    g_u8TYWClearEepromFlag = 0U;
     #if (PART_NUMBER == G54_A01)
     for(uint8_t i = 0U; i < 3U; i++ )
     {
@@ -215,6 +217,61 @@ void Single_Working_Hours_Count(void)
     #endif
 }
 
+
+void TYW_Clear_Eeprom_Service(void)
+{
+    #if (PART_NUMBER == RMR42E_60)
+        uint8_t u8MBMS_StatBattChargeState = 0;
+        uint8_t u8MBMS_StatBattWorkState = 0;
+        uint8_t u8BMCU_BladeSpeedGear = 0;
+        uint16_t u16MMCU_AccumulatedWorkHours = 0;
+        if (Get_CAN_Power_State() == READY)
+        {
+            if ((CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18203220_Msg)) == CAN_SIG_NORMAL) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x157_Msg)) == CAN_SIG_NORMAL) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x339_Msg)) == CAN_SIG_NORMAL))
+            {
+                u8MBMS_StatBattChargeState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattChargeState();
+                u8MBMS_StatBattWorkState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattWorkState();
+                u16MMCU_AccumulatedWorkHours = Get_CAN_CH0_ID_339_Sig_MMCU_AccumulatedWorkHours();
+                u8BMCU_BladeSpeedGear = Get_CAN_CH0_ID_157_Sig_BMCU_BladeSpeedGear();
+                if ((u8MBMS_StatBattChargeState == 0x7U) && (u8MBMS_StatBattWorkState == 0xfU) && (u8BMCU_BladeSpeedGear == 0x7U) && (u16MMCU_AccumulatedWorkHours >= 60000UL))
+                {
+                    g_u8TYWClearEepromFlag = 1;
+                }
+                else
+                {
+                    g_u8TYWClearEepromFlag = 0;
+                }
+            }
+            else
+            {
+                g_u8TYWClearEepromFlag = 0;
+            }
+        }
+        else
+        {
+            g_u8TYWClearEepromFlag = 0;
+        }
+    #else
+        if ((Get_CAN_CH0_ID_161_Sig_MBMS_FaultNum() == 0xFEDCU) && (Get_CAN_CH0_ID_38E_Sig_BMCU_FaultCode() == 0xABCDU) && 
+           (Get_CAN_CH0_ID_234_Sig_EMS_FaultCode() == 0xBCDEU) && (Get_CAN_CH0_ID_22A_Sig_GCU_FaultCode() == 0x8888U))
+        {
+            g_u8TYWClearEepromFlag = 1;
+        }
+    #endif
+}
+
+
+void TYW_RESET_TIME(void)
+{
+    uint32_t Clear_EE[1] = {0};
+    if (g_u8TYWClearEepromFlag == 1)
+    {
+        g_u8TYWClearEepromFlag = 2;
+        Clear_EE[0] = 0;
+        eeprom_WriteRecord(EEPROM_BLOCK_00, (uint8_t *)&Clear_EE, 4);
+    }
+}
+
 /******************************************************************************
 函数名：Get_SingleHour_Display
 功  能：获取单次工作时长小时数函数

Firmware/Source/Application/Driving_Information/Data_Time.h

@@ -32,5 +32,7 @@ extern uint8_t Get_Single_Working_Hours_Status(void);
 extern uint32_t Get_Total_Working_Hours(void);
 extern uint8_t Get_Clock_All_lenth(void);
 
+extern void TYW_Clear_Eeprom_Service(void);
+extern void TYW_RESET_TIME(void);
 
 #endif

Firmware/Source/Application/GUI_Display/GUI_Display.c

@@ -8,44 +8,6 @@ uint8_t Charge_OFF_Flag = 0;
 
 void Clear_Bu98_Conditions(DoNot_Close_Seg_en_t closeType); 
 
-void TYW_Clear_Eeprom_Service(void)
-{
-    #if (PART_NUMBER == RMR42E_60)
-        uint8_t u8MBMS_StatBattChargeState = 0;
-        uint8_t u8MBMS_StatBattWorkState = 0;
-        uint8_t u8BMCU_BladeSpeedGear = 0;
-        uint16_t u16MMCU_AccumulatedWorkHours = 0;
-        if (Get_CAN_Power_State() == READY)
-        {
-            if ((CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x18203220_Msg)) == CAN_SIG_NORMAL) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x157_Msg)) == CAN_SIG_NORMAL) && (CAN_MSG_Status(&CAN_CH0_CanMsgOp, Co_Can_ConvertSubID_CAN_CH0(CAN_CH0_ID_CAN_0x339_Msg)) == CAN_SIG_NORMAL))
-            {
-                u8MBMS_StatBattChargeState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattChargeState();
-                u8MBMS_StatBattWorkState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattWorkState();
-                u16MMCU_AccumulatedWorkHours = Get_CAN_CH0_ID_339_Sig_MMCU_AccumulatedWorkHours();
-                u8BMCU_BladeSpeedGear = Get_CAN_CH0_ID_157_Sig_BMCU_BladeSpeedGear();
-                if ((u8MBMS_StatBattChargeState == 0x7U) && (u8MBMS_StatBattWorkState == 0xfU) && (u8BMCU_BladeSpeedGear == 0x7U) && (u16MMCU_AccumulatedWorkHours >= 60000UL))
-                {
-                    g_u8TYWClearEepromFlag = 1;
-                }
-                else
-                {
-                    g_u8TYWClearEepromFlag = 0;
-                }
-            }
-            else
-            {
-                g_u8TYWClearEepromFlag = 0;
-            }
-        }
-        else
-        {
-            g_u8TYWClearEepromFlag = 0;
-        }
-    #else
-
-    #endif
-}
-
 void Gauge_Power_SOC_pull_Display(void)
 {
     uint8_t u8Soc1Seg = Get_CAN_Num_MBMS_Soc_1_Grid();
@@ -275,6 +237,7 @@ void Gauge_Service(void)
             if (g_u8TYWClearEepromFlag >= 1)
             {
                 TYW_RESET_TIME();
+                Check_SEG_Display();
             }
             else
             {
@@ -442,14 +405,3 @@ void Checkself_LED_Display(void)
 }
 
 
-void TYW_RESET_TIME(void)
-{
-    uint32_t Clear_EE[1] = {0};
-    if (g_u8TYWClearEepromFlag == 1)
-    {
-        g_u8TYWClearEepromFlag = 2;
-        Clear_EE[0] = 0;
-        eeprom_WriteRecord(EEPROM_BLOCK_00, (uint8_t *)&Clear_EE, 4);
-    }
-    Check_SEG_Display();
-}

Firmware/Source/Application/GUI_Display/GUI_Display.h

@@ -66,6 +66,4 @@ void Checkself_LED_Display(void);
 uint8_t Get_Clock_All_lenth(void);
 uint8_t Get_CAN_Num_SBMS_Soc_2_Grid(void);
 uint8_t Get_CAN_Num_MBMS_Soc_1_Grid(void);
-void TYW_Clear_Eeprom_Service(void);
-void TYW_RESET_TIME(void);
 #endif