🐞 fix:档位指示灯颜色以及发送0x125 MMCU_PowerMode=0x1，P档闪烁周期更改为500ms

Firmware/Source/Application/GUI_Display/GUI_Display.c

 #include "GUI_Display\GUI_Display.h"
 #include "SEG_DISPLAY\SEG_DISPLAY.h"
 #include "Application.h"
-#define DISPLAY_OPEN ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) && (Get_CAN_Power_State() != KEY_OFF) && (Get_CAN_Power_State() != PKEY_ON))
+#define DISPLAY_OPEN ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) && (Get_CAN_Power_State() != KEY_OFF) && (Get_CAN_Power_State() != PKEY_ON) && (System_Indicator_CANFlag != 1))
 uint16_t poweroff_time = 0;
 
 uint8_t SOC_Count_Time = 0;
@@ -30,7 +30,7 @@ void Gauge_Cutterhead_Gear_Display(void)
     uint8_t Signal1 = Get_CAN_Num_BMCU_BladeSpeedGear();
     uint8_t Signal2 = Get_CAN_Num_BMCU_ErrorGrage();
     // uint8_t MBMS_StatBattWorkState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattWorkState();
-    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) && (Get_CAN_Power_State() == READY))
+    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) && (Get_CAN_Power_State() == READY)&& (System_Indicator_CANFlag != 1))
     {
         if ((Signal2 == 0x1) || (Signal2 == 0x2) || (Signal2 == 0x3) || (Signal2 == 0x4))
         {
@@ -59,7 +59,7 @@ void Gauge_Gears_Display(void)
     uint8_t Signal1 = Get_CAN_Num_MMCU_TravelSpeedGear();
     uint8_t Signal2 = Get_CAN_Num_MMCU_ParkingGearState();
     // uint8_t MBMS_StatBattWorkState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattWorkState();
-    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) &&(Get_CAN_Power_State() != KEY_OFF))
+    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Charge_OFF_Flag == 0) &&(Get_CAN_Power_State() != KEY_OFF) && (System_Indicator_CANFlag != 1))
     {
         if (Signal2 != 0x1)
         {
@@ -110,7 +110,7 @@ void Gauge_Power_SOC_CHAGING_Display(void)
     uint8_t MBMS_TOTALSigCharge = Get_CAN_Num_MBMS_TOTALSigCharge();
     uint8_t MBMS_StatBattWorkState = Get_CAN_Num_MBMS_StatBattWorkState();
     // uint8_t MBMS_StatBattWorkState = Get_CAN_CH0_ID_18203220_Sig_MBMS_StatBattWorkState();
-    if ((Common_Get_IG_Sts() == COMMON_POWER_ON))
+    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (System_Indicator_CANFlag != 1))
     {
         uint8_t Current_1_Grid = Get_CAN_Num_MBMS_Soc_1_Grid();
         uint8_t Current_2_Grid = Get_CAN_Num_SBMS_Soc_2_Grid();
@@ -210,7 +210,7 @@ uint8_t AllSOC_DIS = 0;
 void Gauge_EleDial_AllSOC_Display(void)
 {
 
-    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Get_CAN_Power_State() != KEY_OFF) && (Get_CAN_Power_State() != PKEY_ON))
+    if ((Common_Get_IG_Sts() == COMMON_POWER_ON) && (Get_CAN_Power_State() != KEY_OFF) && (Get_CAN_Power_State() != PKEY_ON)&& (System_Indicator_CANFlag != 1))
     {
         AllSOC_DIS = Get_CAN_Num_MBMS_StatSoc();
         SEG_SET_EleDial_AllSOC(1, AllSOC_DIS);
@@ -364,7 +364,6 @@ void Gauge_Service(void)
             interact_PWM_Low_Duty = 50;
             if (FLASH_SYNC_05Hz)
             {
-                SEG_SET_GEAR(1, Gear_P, 0);
                 if (Buzzer_time <= 6000)
                 {
                     RTE_GPIO_Set_Level(RTE_GPIO_PORT04_PIN01, RTE_GPIO_LEVEL_HIGH); // OUT_EN_1
@@ -378,7 +377,6 @@ void Gauge_Service(void)
             }
             else
             {
-                SEG_SET_GEAR(1, Gear_OFF, 0);
                 RTE_GPIO_Set_Level(RTE_GPIO_PORT04_PIN01, RTE_GPIO_LEVEL_LOW); // OUT_EN_1
                 BUZZER_ON = 0;
             }

Firmware/Source/Component/Telltales/Telltales_user.c

@@ -882,23 +882,25 @@ static void            LED_P_GEAR_G_Execution(Tellib_uint16_t led_status)
 {
      if ( led_status == 1u )
     {
-        LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_P_GEAR_G, LED_ON);
+        LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Gears_W, LED_ON);
         SEG_SET_GEAR(1, Gear_P, 0);         
     }
     else if(led_status == 2u)
     {
-        if(FLASH_SYNC_05Hz)
+        if(FLASH_SYNC_1Hz)
         { 
-            LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_P_GEAR_G, LED_ON);
+            LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Gears_W, LED_ON);
+            SEG_SET_GEAR(1, Gear_P, 0);
         }
         else
         {
-            LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_P_GEAR_G, LED_OFF); 
+            LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Gears_W, LED_OFF); 
+            SEG_SET_GEAR(1, Gear_OFF, 0);
         }  
     }
     else if(checkself_seg_Flag == 0)
     {
-        LED_Driver_Channel_Set(LampChannel_0, LampCh0_03_P_GEAR_G, LED_OFF); 
+        LED_Driver_Channel_Set(LampChannel_0, LampCh0_05_Gears_W, LED_OFF); 
         SEG_SET_GEAR(0, Gear_P, 0); 
     }
 }